Upgrade processor PowerEdge T410

Similar Questions

• Processore PowerEdge T410 [MS]

  Buongiorno.

  MI servirebbe one ' offer by a nuovo processore per a PowerEdge T410 server.

  Di is so a processor Intel Xeon E5620 (2.40 GHz, 4 C, 12 M Cache, 5.86 GT/s QPI, TDP 80W, Turbo, HT), 1066 MHz Max Memory.

  Grazie

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  - Service tag del Server

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• Upgrade processor PowerEdge SC1430

  I have a SC1430 with the processor Xeon 5110 (dual core 1.6)

  I bought a X 5355 (quad core 2.66) because it was on a few lists of processors supported, some on these forums.

  But when I installed the processor that it displayed but then stopped, saying it was incompatible.

  I went back to google and found a post saying that there are different versions of the card mother sc1430 and old does not support the hearts. But then another message saying there aren't any different revisions of the motherboard and you just need to update the firmware. Ive updated the BIOS to 1.4, but this still does not work. I then found a third post saying 'I' (printed on the front panel) version only supprts demspey and woodcrest and that 'II' also supports clovertown.

  I think I discovered that the x 5355 does not work with my computer, but it would be good if someone could resolve the confusion that I know which is the cpu, compatible for my SC1430.

  Thank you

  Hello

  DevaVictrix

  I went back to google and found a post saying that there are different versions of the card mother sc1430 and old does not support the hearts. But then another message saying there aren't any different revisions of the motherboard and you just need to update the firmware. Ive updated the BIOS to 1.4, but this still does not work. I then found a third post saying 'I' (printed on the front panel) version only supprts demspey and woodcrest and that 'II' also supports clovertown.

  Support for the quad-core on the SC1430 Clovertown processors requires a map of most recent revision system, is not simply an update of the BIOS to add Clovertown support to the original system board that has been released.

  There are also minimum BMC and BIOS revisions that are needed to support the Clovertown CPUs. There are minimum version requirements based on the CPU stepping.

  Systems shipped with a motherboard that supports the Clovertown processors will have a Roman numeral two on the right side of the collar.

  Thank you

• Configuration of memory PowerEdge T410

  Hi all

  Let me start by saying our current configuration of memory (Dell PowerEdge T410):

  We have only one processor installed, so we have 4 DIMM for use A1 - A4. Only 3 are currently installed like:

  A3: 4GB 2Rx8 1333

  A2: 4GB 2Rx8 1333

  A1: 4GB 2Rx8 1333

  A4: white

  in its current wording, our server (running sbs2011) is extremely slow, and we traced it to the use of the RAM. That being said, I went to the store in line of Dell and bought 2 8 GB 4Rx8 1066 RAM sticks to use on the server. I thought I'd take a module of 4 GB, so I then total 24GB (2 GB + 2 8 GB 4).

  Read the manual material, I see that mix 2rx8 and 4rx8 is supported as long as the 4rx8 is in the white slot (first location of the channel). I also see that mixture of capacities of ram is supported as long as each channel has a similar configuration. I assumed that this means that each channel had the same capacity. So I thought 8 GB in every channel:

  A3: 8 GB (channel 2)

  A2: 8 GB (channel 1)

  A1: 4 GB (channel 0)

  A4: 4GB (channel 0)

  I placed the DIMMs in this thought of configuration I have all together until I started the server and I get an error of the incompatibility of DIMM and the BIOS indicates memory configuration not supported. However, starting the server in windows and it says 24GO and is normally. What Miss me? Should I be worried? How can I fix?

  Any input would be greatly appreciated. Thank you very much!

  Hello

  It is not optimal because you mix DIMMS in a bank. The system supports memory triple channel. It does this by spreading a Bank of memory on 3 channels. Here is how the banks are set up:

  DIMM 0 - 1,2,3
  DIMM 1-4

  For an optimal configuration of the DIMMS in slots 1,2,3 must be identical. In older systems that do not support memory flexible configuration the DIMMS in slots 2.3 would be disabled. Since this system supports flexible memory configurations, it will allow the DIMM to stay, but gives no optimal error.

  If you mix memory in this system, you can have 1 Unlike DIMM installed for an optimal configuration. The optimal configuration that uses the maximum memory to the DIMM you have available would be:

  8 GB - 1.2
  4 GB - 4

  The best non-optimal configuration would be:

  8 GB - 1.2
  4 GB - 3.4

  This configuration will always give you errors, but it is better than the current configuration.

  APITech

  I also see that mixture of capacities of ram is supported as long as each channel has a similar configuration.

  This does not mean that you must have identical DIMM modules in the channels. It means that channels must be filled even. Here is an example:

  DIMM 0 slots 1,2,3 =
  DIMM 1 slots 4,5,6 =

  Chanel, 0 = 1.4
  Channel 1 = 2.5
  Channel 2 = 3.6

  You have DIMMs of different rank, speed and capacity mixed through the channels, but you can't have different configurations. For example, in this configuration if you filled DIMM slots 1,2 and then the configuration is valid for DIMM 1 would be filling in only one MEMORY card into the Groove 4 (if the system did not require DIMM be installed in pairs) or 2 DIMMS in slots 4.5. You can't fill a DIMM in the slot 6 since the first slot (3) in the channel (2) is not met.

  The population of channel rule means essentially that you can not complete the second slot in a channel if the first place is not filled. In your housing system 1 and 4 are channel 0. All channels have only a single slot assigned to each memory controller. As long as you have one DIMM in slot 1, you can fill the slot 4.

  Memory population rules can be very confusing. If you have any other questions let me know.

  Thank you

• PowerEdge T410 & Xeon X 5680 compatibility

  Anyone know if the PowerEdge T410 with 1.12.0 BIOS is compatible with of Xeon X 5680? The release notes indicate the system is compatible with the 5600 series processors, but I am unable to get the server to actually start with them installed.

  What I tried:

  Reset the BIOS - exclusion-

  Reflashed BIOS to 1.12.0 - no - Go-

  Removal of all other processors and RAM leaving only bank 1 - No - Go-

  Installed one (do not have another) "verified" CPU X 5650 130 w 6-Core-ALL-GOOD.

  I now feel that BIOS 1.12.0 is NOT compatible with processors X 5680.

  Can someone help and check this for me? My Google-Fu returns no results...

  Thanks in advance for your time...

  > Aaron

  The fact that the .pdf you linked to is buried several layers on the Dell site solidifies only my argument that it shouldn't take this much effort to find valid information such as those.

  In addition, the 1.12.0 BIOS update simply indicates further support for processors 5600 'COLLECTION '. The specsheet.pdf for the server indicates 5600 'SERIES' both of which are easier to find than the .pdf that you linked to (i.e. Google Poweredge t410)

  The technicalguide.pdf you linked to only reinforces my feeling that Dell must be clearer about their documentation. Example 6.1 Overview (table 8) the Poweredge t410 Server supports up to two processors. It then lists 95 Watt and 130 watts. Moreover, it gives reference to a set of processors supported but not going only up to the X 5650. It gives no reference what BIOS version was used during the test, but the stamp on the .pdf indicates July of 2011, but the latest version of BIOS is starting in 2013. I hope that these examples, you'll be able to see that just "assume" things like "good indicators" can trip-up the more experienced Sys Admins.

  And FWIW the 5675 X are the fastest processors more high watt TDP that can run in the T410. Thanks for me to understand that...

  No response is necessary, because I don't care anymore or I'll read.

• Determine the number of the motherboard Dell PowerEdge T410

  I work with a server remotely try to determine the number of points for our mother. It's a PowerEdge T410, nothing is coming through system information or serial number. In my view, that there is a certain different models available. Is there anything that can help me refine it? We have tried to add a second processor and discovered that the second take was damaged by the manufacturer.

  Antares-USA,

  Normally, when you enter your number at support.Dell.com, you can click on the System Configuration and then see the original setup the server was in when he left. If that does not produce the information, then you must simply PRIVATE MESSAGE the serial number for me and I can let you know the motherboard installed.

  Make sure of me private message with the information for your security.

  Let me know.

• Pavilion HP 500 369: need to upgrade processor

  can anyone help me find an upgrade for my desktop is hp Pavilion 500 369... .i just needs to know the compatible SSD and a better processor prefer... If possible processor Intel... Please help me

  Your PC has an AMD FM2 + APU installed in the FM2 socket + on the motherboard of your PC.

  You can only change an AMD FM2 + APU

  The FM2 + compatible processors are listed on this link from HP. See the section upgrade processor.

  http://support.HP.com/us-en/product/HP-Pavilion-500-desktop-PC-series/6879020/model/7084018/document/c04293944/

  By ask on SSDs.:

  Just about any interior 6 GB/s SATA SSD will be compatible, with the exception of NVMe types.

  SSDS m2 are not compatible.

• Pavilian g4: product D5U66PC model #ACJ G4-1305AU series 5CD32631DZ can I upgrade processor and graphics card

  Can I upgrade processor G4 pavilian

  Hello

  I can't find the full specs of your computer:

  http://support.HP.com/us-en/product/HP-Pavilion-G4-notebook-PC-series/5186805/model/5374496/product-info

  But I can answer here using information from other G4 computers:

  (a) for CPU: you need to replace the motherboard too and it is a very expensive upgrade. Please read the manual on the link third next (page 84):

  http://support.HP.com/us-en/product/HP-Pavilion-G4-notebook-PC-series/5186805/model/5374496/manuals

  (b) no doubt a no, can't you straight up to 90% of laptops can't do this part, including yours.

  Kind regards.

• install windows2003 Server poweredge t410

  Im trying to install windows 2003 enterprise edition in a dell poweredge T410, but it shows the error cannot find the hard drive, how can I install windows 2003 Enterprise edition r2 on the edge of power supply dell T410? What drivers do I need?

  Hello

  I would support you for this post in the Windows Server Forum.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Card LaCie esata PCI card on windows 2003 server Dell poweredge T410 error code 10

  Hi guys, I am trying to install a new card Lacie esata PCI card (http://www.lacie.com/products/product.htm?pid=11217) on windows server 2003 on Dell poweredge T410. Windows detects the card and install the driver, but then, it shows an error code 10 "device Can not not started. I tried the update, uninstall, reinstall, adding Lacie driver CD through the "Hardware Wizard', chaning PCI card slot by 4 to 1. But nothing has worked. So please let me know if you think that there is a fix for this solution. Thank you

  Hi Rlap,

  The question you have posted is related to Windows Server and would be better suited to the TechNet Discussion groups. Please visit the link below to find a community that will provide the support you want.

  Windows Server Forums: http://social.technet.Microsoft.com/forums/en/winservergen/threads

• HP Compaq Presario CQ60-404SA is laptop possible to upgrade processor for AMD 64 X 2 TL - 60

  HP Compaq Presario CQ60-404SA is laptop possible to upgrade processor for AMD 64 X 2 TL - 60 will perform like now Vista premium 64.

  What CPU is currently installed?

  Download and run CPU-z as the quickest way to say.

  The following CPU is compatible with your system notebook\s card. The processor AMD X 2 QL-60 and QL - 62 are your best compatible options.

  AMD Turion Dual-Core
  (1 MB L2 cache)
  Processor 20 GHz ■ RM-70 X X
  Processor 2.1 GHz ■ RM-72 X X
  Athlon™ X 2 Dual-Core AMD
  (1 MB L2 cache)
  Processor 1.9 GHz ■ QL-60 X X
  Processor 2.0 GHz ■ QL-62 X X
  Sempron™ Single-Core AMD
  (512 KB L2 cache)
  Processor 2.1 GHz ■ TR - 42 X X
  ■ If - 40 2.0 GHz processor X X

• PowerEdge t410. service tag 2X2RN4J. Alimentatore [CF]

  Devo auswechseln alimentatore per server PowerEdge t410 - 2X2RN4J - 06353597395.

  Model riflettore A580E-S0. REF n. AA25730L.

  [email protected]

  Buongiorno, the sto contattando by mail.

• RAM modules per server poweredge T410 [CF]

  HO a poweredge T410 con 4 GB of Ram (2 + 2) che wants to bring a mettere banchi tutti 16GBDevo da 2 GB o posso anche diversi banchi cute? using solo 2 GB riempo tutti gli slot

  Buongiorno, would be opportuno banchi delle stessa super cute.

• PowerEdge T410 error: POWER: not available in standby mode

  Good afternoon!

  Has anyone caught the error described below with a PowerEdge T410?

  POWER: not available in standby mode

  Power: Off

  During this operation you tried these steps on both power supplies separately? If yes then it seems that the motherboard may have a problem.

• You want to upgrade processor for my gateway computer.

  Information title: Original CPU required

  My gateway has the 4006153R (Love Valley G) of Intel G965 Viiv Motherboard. The Core 2 Duo E6300 processor has an identifier (SL9S5) on the processor. I have the motherboard and processor supported of the gateway information for upgrades of the processor. If I chose a compatible with the motherboard upgrade processor, the processor must have the same SL * as the current processor if the BSF MHz and required socket are identical? My processor is not incorporated and uses the LGA775 socket. Answers to the specific question are greatly appreciated!

  SL numbers are unique for each processor:

  Your E6300: http://ark.intel.com/products/27248/Intel-Core2-Duo-Processor-E6300-2M-Cache-1_86-GHz-1066-MHz-FSB

  (SL9SA and SL9TA)

  SL9S5 = X 6800: http://ark.intel.com/products/27258/Intel-Core2-Extreme-Processor-X6800-4M-Cache-2_93-GHz-1066-MHz-FSB

  J W Stuart: http://www.pagestart.com