Upgrade to CC, but that you want to use PS7 on laptop
I want to upgrade to PSCC and have two offices (two locations), which are the two I use PSCC on, but also to use my computer laptop a lot between the two. I especially make digital scrap booking and photo editing. I have to use the PS7 on my laptop that you can't have PSCC on two computers. (I don't want to have to switch back) How can I make brooms that I create in usable in the PS7 PSCC. I have brushes that have been created in PRIVATE security firms and are not compatible. I know that there is a change in 2014, but looking for a viable solution to the problem of having multiple computers
In my view, the answer is Yes, you would have to make the brushes in photoshop 7, if you want to use both cc and ps 7.
You could also install photoshop cc on a third computer, you will need to just sign one of the others when you want to use.
Tags: Photoshop
Similar Questions
-
I'm trying to set up an NFS share on my windows server so that I can do vMotion. I have 2 ESX servers that will access the storage location so that I can vMotion the content on an ESX Server to the other ESX Server. I came across many discussion forums who say I need to "copy the files/etc/passwd and/etc/Group for your ESX Server to the machine that you want to use as map server"... How can I copy these files onto my ESX Server?
I am VERY VERY new to VMware and will need step by step instructions on how to do it.
Thanks in advance!
Hello
Try this http://vmetc.com/2008/02/19/create-a-nfs-share-for-vm-iso-files-with-windows-2003-server-r2/ and this
http://ITKnowledgeExchange.TechTarget.com/it-consultant/Configuring-NFS-in-Windows/
To copy the files everywhere I would use WINSCP which based a gui app secure copy, which should make it easy to copy the file into the Windows box
Concerning
-
I'm done with xpantspyware on my Windows XP some how I seem to have got rid of it but can not acess my control panel or anything without this arise (chose the program you want to use to open this file) can not get my internet explore have micorsoft essentials there have scan and says no virus detected is not came with any disk so lost here, what I bring to the Dr, or can it be fixed thanks
You might have a problem with your .exe file associations. Try the "fix EXE file association" on the link below. Be sure to read the note at the top of the page regarding the .exe, complications of the association.
<>http://www.dougknox.com/XP/file_assoc.htm >
HTH,
JW -
I have a Bluetooth device that cannot get a pairing code. I carefully checked the three options of bluetooth connection and the 3rd works, i.e. one that allows the pair without using code.
So I pair without code - and Windows 7 allows me to do.BUT when I run the program that connects to the device, I get a pop up Bluetooth asking me a code!It is completely buggy and, moreover, I am not allowed to take control - I know exactly what device I want to use, I see in Bluetooth devices, but for "reasons of security MS" I'm not allowed to use it!PLEASE HELP SOMEONEHello1. when the question is is produced?2. What is the number of brand and model of your bluetooth device?I would like to do the following and check if they help.Step 1:Temporarily disable all security software and check if the problem persists.
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Step 2:The problems with Bluetooth devices(Valid also for Windows 7) -
I have an ipod of family members which is no longer used. I would like to use in my office for music and other, but it has one apple that we cannot find a password ID and don't know how to reset. The music on the ipod I would like to remove, but cannot do anything at this point. Help and suggestions would be great.
Thank you
To reset the PW:
-
I have Windows 7 Media Player and that you want to know why, after burning an album of my playlist it records, but there is no sound in playback of the CD, that I taped?
HI - what device you are playing it back on?
-
My cloud application that you want to create is clock and clock and and play back, he will not cease. Now did for more than a week. It sync and sync all day long, but never finished sync. What's wrong? I only use 30% of the cloud to create!
Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html
-
I got an old macbook pro version osx.6.8 and that you want a version of photoshop that I can use on it, but after searching the Internet, I am completely confused. Can you help me?
It's so old, that I doubt you'll have something to work on it which currently does not work.
PS must be prior to version 3.
-
I have photoshop and light room formula already and that you want to add illustrator to my current plan but to know how much it will cost me?
Rebecca,
Unfortunately, you can't get a normal subscription, no way to add it to your package.
Added to your current price, I'm afraid that it will be close to the price of the entire subscription cloud.
-
I have photoshop installed on your laptop and that you want on another laptop but it won't let me
I have photoshop cc installed on a laptop that you want to install it on another, but it does not allow me to the then, how do I sort this problem.
Hello
Please access the following link and download/install Adobe Creative Cloud App. One time installed App CC, please sign in and click on the tab "' Apps'" and try to install Photoshop CC from here. If you get an error message, please post a screenshot of the error message with the operating system (MAC or Windows) computer on which you are installing.
Download Adobe Creative cloud apps | Free trial of Adobe Creative Cloud
Thank you.
-
I have an acer laptop about a year ago, I put a username and password, but now that I want to use again, I forgot the password. How can I reset it so that I can get into my laptop?
Happy that he sorted out for you. Thank you for taking the time to let me know. MS - MVP - Elephant Boy computers - don't panic!
-
Two days to try to solve this problem of complete. Vista Home Premium (64-bit) has been installed more than 6 months ago. With the legal copy in the computer, I can choose the repair, it shows me me partition Windows Vista Home Premium. I don't get the system recovery options, but I get a window that says «the version of the system recovery options is not compatible with the version of windows that you want to repair...» ». I loaded the original drivers for the motherboard. I started in safe mode, and I can see the different folders. It tells me that everything is there. Does anyone have a solution for this? I use a product called '360 °' for regular backups, but backups are on a network drive.
Thanks for the suggestions!
Here is a link to some people who had the same problem and solved: http://keznews.com/forum/viewtopic.php?f=2&t=20665. It seems to have something to do with the help of a record of 32-bit with 64-bit recovery (or something of the sort).
I hope this helps. Good luck! Lorien - a - MCSE/MCSA/network + / A +.
-
All new computer running windows 7 64 bit, outlook and office 2007 installed, initial problems with the temporary user profiles, follow up advice and removed user profiles in the system registry and all seemed to go well. Computer works for about a week with two user profiles and now all of a sudden I get an error message when I start Outlook and from time to time when you browse the internet, it reads:
The server that you are connected using a security certificate which cannot be verified... The name main target is incorrect... You want to continue using this server? (If I hit Yes then I can send emails)
When I open view certificate it says: this root CA certificate is not approved. To enable trust, install this certificate into the store certificate authorities roots of trust. (Attributed to and: Cisco device demo certificate - valid from 10/02/2009 to 03/10/2019).
Problem is I don't know what the certificate is, what I need, to find out how locate, how to move etc, I have read a few forums, but they are starting to be too technical. I need help for step by step easy.
I tried to uninstall outlook 2007 and reloading and clearing of the States of ssl in internet options, and then reset by default (as someone suggested), but it made no difference.
Problem is when you leave the store with the new computer, nobody wants to know you if you need assistance!
Can someone please help? Thank you
Hello
Welcome.
Just a tip, never download and install anything on your PC, unless you know and trust him.
> «Computer brand new...» I need help for step by step easy. »
Contact the PC manufacturer emphatically support team.
> ".. . Office 2007 installed...
Support to the: http://answers.microsoft.com/en-us/office/default.aspx#tab=1 and ask your question in Outlook it.
You can also check if this problem occurs when you use Windows Live Mail, which can be downloaded on: http://download.live.com/wlmail.
> «Server that you are connected using a security certificate which cannot be verified...» »
Just learn more about the certification of server to the: http://en.wikipedia.org/wiki/Certificate_server .
Remember: keep the system tools and security update.
Success.
Rgds.
itconcerned
-
Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.
I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:
"This device cannot find enough free resources that it can use. (Code 12) »
"If you want to use this device, you will need to disable one of the other devices on this system."
This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!
Additional information:
A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway
If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?
I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.
I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.
Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)
My specs:
Acer TravelMate p257-MG
Windows 7 business
Intel core i5-5200u 2.20 GHz 2.20 Ghz processor
8.00 GB of ram
64-bit operating system
1 t hard drive
940 m Intel HD graphics 5500 & Nvidia Geforce card
Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »
Thanks in advance!
Hello
Thank you for your response.
I appreciate your time.
I suggest you run ' Intel Chipset Software Installation Utility ' and check.
Reference:
http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.htmlPlease keep us updated.
Thank you
-
Question: I have disabled Lightroom on a single computer, but always get a message on the new computer, saying that the serial number is still in use on the old computer. I'm on a Mac and you want to use LR6 on a new iMac. Any suggestions?
Thank you very much. Problem now solved and happiness is back.
Maybe you are looking for
-
How can I get my favorites to stay on the sidebar? I don't want a menu drop-down every time
I want that my favorites to stay on the left sidebar. The new Firefox has a bookmark tab to pull down at the top of the screen on the right and I hate it. I don't want to pull down a list of my favorites. I like to stay ALL the time
-
So where to start? Maybe how I lied by Microsoft like 5 times now, said my problem is solved, is fixed, or sitting on the phone for 5 hours and then being told that I would be reminded tomorrow. O never received a call. The question is this. I recen
-
Windows 10 gets download and it will fail to install on my computer.
Original title: 10 failed windows I went threw the download process just fine, then when you want to get it updates (check for updates), he has been on the page for over an hour and I tried permeable to this and when it arrives even toe page it will
-
Splash screen displays no tiles and drive usage is 100 percent.
The splash screen displays no tiles. Task bar icons are also empty. My use of the disk is 100 percent, and also the use of the RAM is very high. I have all these huge programs running in order to cause such a problem. Help, please.
-
methods to follow the actual size of the thin disk
In my environment, I'm above implement disk Thin Provisioning, for the purposes of the report, I need to monitor the actual size of the service end disc is there a tool or script that would help me to monitor disk size real of thin disc put into serv