Upgrade to El Capitan without access to the main Apple ID email address
My girlfriend has upgraded its MacBook Pro 13 inch (2009) for OS X El Capitan 10.11.2 without access to its primary email id apple address. When she tried to log on after restart, as she was sent a verification message to her old email address which she doesn't have access, and I don't seem to be able to point to a new e-mail address, I'm guessing that for reasons of security. She knows the password to his apple ID and created a new apple ID, but she cannot connect to icloud and can not access to its files, photos and work of the University. And no, there is no going back upward.
Is it possible that it could access its files do not have access to the old email address? She is not precious on the original apple, ID she wants fair access to its things that apparently is not authorized to access.
Thank you
James
Have her contact iTunes to regain the use of the original account
Then she can change contact email address.
Purchases are locked the account than them, inducing update OSX bought and accounts cannot be merged
Tags: Notebooks
Similar Questions
-
I use a Mac Book Pro OS X Version 10.9.5
How can I change the 'old Apple ID address' in Preferences system iCloud to my new Apple ID email address?
When I change the password using my new Apple ID, I get a message to iCloud of system preferences to connect to the old email address Apple ID.
How can I change the "old Apple ID email address stored in iCloud System Preferences' to my new Apple ID email address
< re-titled by host >
You must disconnect with the old ID and return with a new, you can't just change it in the text field.
-
I got lightroom 5.5 on a computer with a hard disk failure. How do I install it on my new computer without access to the old computer?
You can download Lightroom 5.7.1 (the final version of Lightroom 5) from the following Web site: keeping up-to-date for Lightroom
Lightroom 5.7.1 is a solid version, and you are entitled to it. You will need your serial number to activate the installation.
-
How can I remove the desired or invalid email addresses in automatic drop-down list that appears when I start typing an e-mail address in a new message (Outlook)?
If you wish, you can also stop Outlook of suggesting e-mail addresses as you type.
Tools > Options.
Tab "Preferences".
Click e-mail Options.
Click Advanced e-mail Options.
Do not forget to uncheck "suggest names while completing to, Cc, and BCC fields."
And OK your way out. -
original title: contact prompting
When you create a new email a first letter of the contact request full email address on frequent contacts. How to extend the time, what he remembers of those contacts?
WinMail remembers only 29 addresses used through the registry. These links will give you a few options.
How to delete registration completion email in Windows Mail
http://www.Winhelponline.com/articles/245/1/how-to-clear-the-email-auto-complete-entries-in-Windows-mail.htmlHow to remove an address from the list of AutoComplete in Windows Mail
http://email.about.com/od/windowsmailtips/Qt/et_del_autocomp.htm -
Since the upgrade to El Capitan my automatic backups on my Apple Time capsule do not work
Everything worked fine until I upgraded to El Capitan... now I don't have enough space for back ups on my time capsule (1 TB is) and a couple of years.
What can I do simple?
Thank you
You have 3 options. Ranked in order of the most expensive on the down...
(1) add a new time Capsule and start backups goes to this device. It is also the easiest option.
(2) add a USB hard drive to the existing time Capsule and start going that animate the backups. Next best option in terms of simplicity
(3) delete the existing and any time Capsule hard drive start over with new backups. Not too difficult, if you're good by following the instructions
-
EA4500, network drive doesn't work without access to the secure folder
The map I try the USB hard drive connected to my EA4500 router as a network drive in Windows 7 and it works perfectly until I have enable access to files on the router.
After enabling file access secure and do not change other settings of the router I first disassemble the drive because it has been implemented without credentials and does that any more. When I try to remap the drive I use the same address, but select 'Connect using different credentials' when he invites me to the log in info I try to use the router administrator account, but it fails to connect. Diagnostics Windows network tells me that the device has refused the connection. I have to create an account on the router in the settings of folder with the same username and password that I use on my computer and tried to connect it without checking 'Connect using different credentials' (and them by manually typing if it matters) with the same results.
Even with secure file access enabled, I can still reach the reader very well by typing 'ftp://192.168.1.1/' in the file Explorer. It prompts me for a username and password, I put in the administrator credentials, and I'm in. The account, I created with the same name of user and password that my computer works this way.
After you turn off access to the secure folder as everything is working perfectly again... I'd rather do it with him, however.
Follow these instructions: http://homekb.cisco.com/Cisco2/ukp.aspx?pid=80&vw=1&articleid=25813
When you click the Browse button, that the router shows up when access to secure files is disabled, but not after it is activated. I've looked through my sharing settings windows and haven't noticed something that should cause problems, about that everything is allowed. I also tried disabling my firewall without success.
Well, that was weird...
I have reset the router, was able to operate with secure file sharing is enabled, but only, I could get a device connected to the player. I went in the USB storage on the router settings and started to get a bunch of error 2123 and 2118 s to the point that I was not yet able to change the settings. On the USB, I noticed a file named "." ftp_share.nfo"what is strange because it seemed sure whether a file instead of a folder in previous tests. I deleted the folder and all the errors disappeared, had haunted all my settings for the drive into the router, and now it works perfectly...
-
Client remote access VPN gets connected without access to the local network
: Saved
:
ASA 1.0000 Version 2
!
hostname COL-ASA-01
domain dr.test.net
turn on i/RAo1iZPOnp/BK7 encrypted password
i/RAo1iZPOnp/BK7 encrypted passwd
names of
!
interface GigabitEthernet0/0
nameif outside
security-level 0
IP 172.32.0.11 255.255.255.0
!
interface GigabitEthernet0/1
nameif inside
security-level 100
IP 192.9.200.126 255.255.255.0
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
nameif failover
security-level 0
192.168.168.1 IP address 255.255.255.0 watch 192.168.168.2
!
interface Management0/0
nameif management
security-level 0
192.168.2.11 IP address 255.255.255.0
!
passive FTP mode
DNS server-group DefaultDNS
domain dr.test.net
network of the RAVPN object
192.168.0.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.200.0_24 object
192.168.200.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.9.200.0_24 object
192.9.200.0 subnet 255.255.255.0
the inside_network object-group network
object-network 192.9.200.0 255.255.255.0
external network object-group
host of the object-Network 172.32.0.25
Standard access list RAVPN_splitTunnelAcl allow 192.9.200.0 255.255.255.0
access-list extended test123 permit ip host 192.168.200.1 192.9.200.190
access-list extended test123 permit ip host 192.9.200.190 192.168.200.1
access-list extended test123 allowed ip object NETWORK_OBJ_192.168.200.0_24 192.9.200.0 255.255.255.0
192.9.200.0 IP Access-list extended test123 255.255.255.0 allow object NETWORK_OBJ_192.9.200.0_24
pager lines 24
management of MTU 1500
Outside 1500 MTU
Within 1500 MTU
failover of MTU 1500
local pool RAVPN 192.168.200.1 - 192.168.200.254 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 66114.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) source Dynamics one interface
NAT (it is, inside) static static source NETWORK_OBJ_192.9.200.0_24 destination NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.9.200.0_24
Route outside 0.0.0.0 0.0.0.0 172.32.0.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 0.0.0.0 0.0.0.0 outdoors
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
Terminal registration
name of the object CN = KWI-COL-ASA - 01.dr.test .net, C = US, O = KWI
Configure CRL
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.9.200.0 255.255.255.0 inside
Telnet timeout 30
SSH 0.0.0.0 0.0.0.0 management
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 66.35.45.128 255.255.255.192 outside
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 30
SSH version 2
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
internal RAVPN group policy
RAVPN group policy attributes
value of server WINS 192.9.200.164
value of 66.35.46.84 DNS server 66.35.47.12
VPN-filter value test123
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value test123
Dr.kligerweiss.NET value by default-field
username test encrypted password xxxxxxx
username admin password encrypted aaaaaaaaaaaa privilege 15
vpntest Delahaye of encrypted password username
type tunnel-group RAVPN remote access
attributes global-tunnel-group RAVPN
address RAVPN pool
Group Policy - by default-RAVPN
IPSec-attributes tunnel-group RAVPN
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory 2
Subscribe to alert-group configuration periodic monthly 2
daily periodic subscribe to alert-group telemetry
aes encryption password
Cryptochecksum:b001e526a239af2c73fa56f3ca7667ea
: end
COL-ASA-01 #.
Here is a shot made inside interface which can help as well, I've tried pointing the front door inside the interface on the target device, but I think it was a switch without ip route available on this subject I think which is always send package back to Cisco within the interface
Test of Cape COLLAR-ASA-01 # sho | in 192.168.200
25: 23:45:55.570618 192.168.200.1 > 192.9.200.190: icmp: echo request
29: 23:45:56.582794 192.168.200.1.137 > 192.9.200.164.137: udp 68
38: 23:45:58.081050 192.168.200.1.137 > 192.9.200.164.137: udp 68
56: 23:45:59.583176 192.168.200.1.137 > 192.9.200.164.137: udp 68
69: 23:46:00.573517 192.168.200.1 > 192.9.200.190: icmp: echo request
98: 23:46:05.578110 192.168.200.1 > 192.9.200.190: icmp: echo request
99: 23:46:05.590057 192.168.200.1.137 > 192.9.200.164.137: udp 68
108: 23:46:07.092310 192.168.200.1.137 > 192.9.200.164.137: udp 68
115: 23:46:08.592468 192.168.200.1.137 > 192.9.200.164.137: udp 68
116: 23:46:10.580795 192.168.200.1 > 192.9.200.190: icmp: echo request
COL-ASA-01 #.
Any help or pointers greatly appreciated, I have do this config after a long interval on Cisco of the last time I was working it was all PIX so just need to expert eyes to let me know if I'm missing something.
And yes I don't have a domestic network host to test against, all I have is a switch that cannot route and bridge default ip helps too...
Hello
The first thing you should do to avoid problems is to change the pool VPN to something else than the current LAN they are not really directly connected in the same network segment.
You can try the following changes
attributes global-tunnel-group RAVPN
No address RAVPN pool
no mask RAVPN 192.168.200.1 - 192.168.200.254 255.255.255.0 ip local pool
local pool RAVPN 192.168.201.1 - 192.168.201.254 255.255.255.0 IP mask
attributes global-tunnel-group RAVPN
address RAVPN pool
no nat (it is, inside) static source NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.168.200.0_24 static destination NETWORK_OBJ_192.9.200.0_24 NETWORK_OBJ_192.9.200.0_24
In the above you first delete the VPN "tunnel-group" Pool and then delete and re-create the VPN pool with another network and then insert the same "tunnel-group". NEX will remove the current configuration of the NAT.
the object of the LAN network
192.168.200.0 subnet 255.255.255.0
network of the VPN-POOL object
192.168.201.0 subnet 255.255.255.0
NAT (inside, outside) 1 static source LAN LAN to static destination VPN-VPN-POOL
NAT configurations above adds the correct NAT0 configuration for the VPN Pool has changed. It also inserts the NAT rule to the Summit before the dynamic PAT rule you currently have. He is also one of the problems with the configurations that it replaces your current NAT configurations.
You have your dynamic PAT rule at the top of your NAT rules currently that is not a good idea. If you want to change to something else will not replace other NAT configurations in the future, you can make the following change.
No source (indoor, outdoor) nat Dynamics one interface
NAT source auto after (indoor, outdoor) dynamic one interface
NOTICE! PAT dynamic configuration change above temporarily interrupt all connections for users on the local network as you reconfigure the dynamic State PAT. So if you make this change, make sure you that its ok to still cause little reduced in the current internal users connections
Hope this helps
Let me know if it works for you
-Jouni
-
I'm trying to set up a homepage on my Android mobile device. All changes must have access via the menu. It works fine on my desktop computer, but there is no menu button on the mobile version.
Hi rcbeeman39:
- Some Android devices have a menu built directly into the device button. In these cases, Firefox for Android cache added to the menu. You can always access the Firefox menu by pressing the menu button on the unit OR
- Hardware menu button is usually located at the bottom of the unit, next to the home, search and navigation buttons.
- Lots of information, including screenshots https://support.mozilla.org/en-US/kb/firefox-menu-icon-missing-android-how-access-menu
- If the above does not help, please, let us know your model number Android phone or Tablet (S4? HTC One? (etc), operating system Android version (jellybean 4.1, 4.2, 4.3, 4.4, kitkat lollipop 5.0, e tc) and exactly what you were doing, what happened and what you expected
- Finally, there is no way supported "setting a homepage" on Firefox for Android. The 3rd party unsupported host changer module can work for you: https://addons.mozilla.org/en-US/android/addon/home-changer/?src=search also, you can see the start screen customization can be good enough: https://support.mozilla.org/en-US/kb/use-awesome-screen-search-web-bookmarks-and-more
Fingers crossed the foregoing allows just a little!
... Roland
-
Restrited access and without access to the internet
When I connect my new computer home, he sees all the wifi nearby, and I can connect with my wifi. When I get to the Office I opened the computer, he sees our netgear wifi and wifi. That I connect to our wifi, after a time, she becomes limited or restrited and then I have more access to the internet. What are the causes that she. After that, I do not see any other wifi nearby either.
I've updated the LAN driver and it solved the problem as you have suggested.
Tthank you
-
Allow "Flatten XML" and "Unflatten from XML" to work without access to the internet.
Hi all
In my program, I use the XML Unflatten and flatten XML screw. On my development computer, everything works fine. As soon as I put it in the production environment, it has stopped working. I reduced to doing in my production environment, there is no internet access and I'll be never able/allowed to have access to the internet there.
Someone at - it an elegant way to solve this problem? (By "elegant" I do not want to manually change all of the .xml files that I produce to include the path to the local LVXMLSchema.xsd) Is there a file .manifest or .config can we change to point my program compiled to the xsd on the right file? Perhaps another method?
Thank you!
Kind regards
Filip.
Hi all
I think I found the solution.
In the end, it wasn't an Internet. It was the inclusion of the classes in the compiled code or not.
Attention! It was not enough just uncheck everything in the "Additional Exclusions" section of the building. I actually had instantiate each class possible, which can be converted by the "XML Unflatten" in the .vi. I even tried to put the lvclasses in the always include the article of the source of the build. This no longer works.
Thanks for all your suggestions guys!
Kind regards
Filip.
-
How to remove the definition of backups RMAN of SBT without access to the Court?
Hello
I have a restore with RMAN scenario where I have a controlfile with many information backup (many backups) around 100-200.
The last backup occurred at the target on the JOB, but now I need to restore from the last backup that is taken (at the level of the disc) and in the other node, because we like to clone the production database.
Then all the info controlfile rman metadata is 'dirty '.
Normally I do the following:
New target site:
I restore the backup controlfile.
Then:
overlap backupset;
delete noprompt expired backupset;
Now the news of rman controlfile are removed.
Now, I save my RMAN backup.
Catalog starts by ' / backup/test1 / '.
To complete this control register and catalog my file rman backups in this case a backup set.
After that, I start my restore and recover commands.
The problem I found is: because the backups were taken to SBT to the target site, but in this site I have not access to the SBT, the work of does ' t crosschek.
How can I fix it to remove rman controlfile 'old' backups done sbt?
Thank you very much
Arturo
V$ BACKUP_SET query and generate a list of commands 'CHANGE BACKUPSET '?
Hemant K Collette
-
How to keep creative clouds working without access to the Internet?
I'll be out of the country for two weeks with virtually no access to the internet. How can I make sure that creative cloud will continue to work if there is no way to confirm the activation?
Hi there-
As you may know, a license check is performed every 30 days:
http://www.Adobe.com/products/creativecloud/FAQ.html
Do I need a continuous Internet access to use my Creative Suite apps?
Because your Creative Suite applications are installed directly on your computer, you will not have a continuous Internet connection to use on a daily basis. However, you need to be online when you install and license your software and at least once every 30 days thereafter. The software warns you when you connect to the Internet for a license status check.
However, if the product can not check your permit at the 30-day mark, a period of 7 days will begin to give you a little extra time. If you are not able to access the internet within 7 days, your applications will be blocked (Source: http://forums.adobe.com/message/4513667#4513667)
Unfortunately, there is no way to "force" the verification process to ensure that the audit is not right because you start your 2 weeks away.
Here are a few forum threads that contain more discussion of this issue:
http://forums.Adobe.com/message/4747308
http://forums.Adobe.com/message/4746582
Good luck
-
Unable to access 2 of the 3 lists of email addresses. Why?
This has just occurred. The list of addresses even comes with all email addresses 3 I. Even when I exit & turn off my computer and return to the e-mail can't always to my 2 other address lists. For example: in the case of e-mail 1 or 2, 3 email address appears. I have send 3 it's good. Also, I have to use tools for a list of addresses, and it fills the screen - so I can't click to get the address on my e-mail address line because my email is covered by the address screen. Frustrating.
Previously, I could go to 'contacts', which is now gone and click. The address list came & I could drag the address to my email. Now I can not do.
So I can not access 2/3 email address lists, cannot click on an address to put on my email to send. So, how can I solve this. ? I have hundreds of email addresses, I have access. I'm NOT a computer genius so please help and if you can, please keep it simple as you can!
Thank you, GailAre you talking about the contacts sidebar which allows you to turn on and off with the F9 key?
-
access to the main time line function
Hi all
In as2, we use _root to access the main timeline inside the movieclip or button function.
In as3 how to access the main scenario works inside the movieclip or button.can please tell me.
'root' is the equivalent of AS3, but use it alone will often not wortk. Most often, you will need to cast as a form of object until the compiler will recognize. To aid "MovieClip" (root) will usually do the trick.
Maybe you are looking for
-
I know this is a parameter in order to prevent the download of malicious software, but I don't need. Please tell me how to disable.
-
I tried different ways, some I looked upwards, when I connect my xps 8300 to my LED TV with hdmi cable, I can't do set up correctly and there is no sounds coming from the tv. I tried all the settings that has been suggested. does anyone have a simple
-
RV180W of WLAN traffic is not routed to WAN
My WIFI traffic is not routed to WAN. I can access LAN and plug to NIR all on the local network. But internet access is not possible. WAN LAN access is allowed. I have reset the RV180w to factory settings and also reflashed the firmware to make sure.
-
Dreamweaver CC and contribute 6.5
Anyone know if someone develops a Web site for us in Dreamweaver CC and I currently 6.5 contribute, I'll still be able to edit this site as before with the version of 15 years of Dreamweaver?Thank youLinda
-
change the fn brand to brand just to fn
I have a document that has a space before each call note. How can I do a search/replace to get rid of the space?Thanks for any helpIan