Upgrade to LV 2012

Similar Questions

• Upgrade Windows Server 2012 Std to 2012 Std R2 with the same license

  I have an activation key for windows server 2012 Std, can I upgrade windows server 2012-2012 Std R2 with this key? Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center

  Original title:

  Virtualization server 2012

  I got too many answers to this question. I need the correct answer before buying any CALs galore.

  I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center. I have 25 computers that need to communicate with the server throughout the day, all the different machines. I want to know the best option without breaking the Bank. I permit the data center included in the package to my server.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Upgrading from Quickbooks 2012 gives error Windows install is not properly installed

  Received system error. Installed Windows is not installed corredtly

  During the upgrade from Quickbooks 2012 received the "F:\\thirdparty\dotnet40\dotnetfx40_full_x86_x64.exe" message that ends above message.

  Try the procedure described here: http://support.microsoft.com/kb/315346

• ScanSnap s1500 will not analyze after the upgrade to exchange 2012

  ScanSnap s1500 will not e-mail scan after 1st scan to e-mail.  n ' will analyze any email on subsequent tests.  -have to restart the computer.  This began when we have upgraded to Exchange 2012 r2.  Using Outlook 2010.  -have updated to the latest firmware and software.  E-mail appears in the sent items folder.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are unable to scan.

  As you mentioned that this began when you upgraded to Exchange 2012 R2, then I suggest you re-post your query on The TechNet Forums because we have experts working on this type of questions and you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Cost of upgrading Windows Server 2012 R2 Essentials

  I recently purchased Windows Server 2012 Essentials for use as a small home server.  I have not yet installed the software yet since Server 2012 R2 Essentials will be published shortly.  I do agree with Microsoft Software Assurance (SA) because it is unaffordable for my use case.

  This news post tackles the new R2 software costs:
  http://www.ZDNet.com/Microsoft-ups-price-on-Windows-Server-2012-R2-Datacenter-by-28-percent-7000019168/

  Is it really true that there will be absolutely no discount 2012 Essentials to the 2012 R2 Essentials Server server upgrade?  In other words, if I want to use R2, I lost only $425 on the previous version?

  I'm perfectly willing to pay for the new features, but if this is actually true, it probably is the straw that will break all the time about my relationship with Microsoft.  First Windows 8, forcing me to Microsoft of viscerally uncomfortable mold UI 'Modern' (I went back to Windows 7 like everyone else), then Windows 8.1 that does nothing to address my concerns and now the news that the piece remaining of the Microsoft software that is actually good is unaffordable - it's just too.

  I sincerely hope that this information is incorrect, and there will be a path to a reasonable level for customers like me who cannot afford SA and cannot afford another $500 on the server software.  Honestly, if this is the case I will consider seriously to switch to Linux.

  Please tell me that there was a mistake.  I hope that we are not at an impasse in our 30-year relationship, Microsoft...

  (Apparently there is no category for the Windows Server in the Microsoft community (why?), so I'm posting here in the hope to get a response.

  Hello

  As you spotted, are supported for Windows Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  To help you, you should find the appropriate experts there.

  Thank you.      :)

• The upgrade of the 2012 2012 Rd

  Hi all

  Pulling what's left of my hair on...

  I'm trying to upgrade a Dell PowerEdge 1850 2012 to 2012 R2, but the error

  • Storage controllers: LSI adapter, Ultra320 SCSI 2000 series, w/1020/1030

  Can someone send a link to this please? The dell website is useless when looking for drivers. I hope someone out there has found?

  Thank you

  There is no driver. The PERC 4 are incompatible with the help of R2 2012 no new drivers and previous drivers have been developed, either by Dell LSI. 2012 is higher you can go. I'm not saying it's impossible, it's just that many people have lived this before without a bit of luck.

• The Dell R710 server upgrade to R2 2012 Windows

  Question for the forum:

  I have a Dell R710 server.  There a PERC 6 / i RAID card in there.  There are discs 5 x 2 TB on the PERC 6 / I configured in RAID-5 right now with the 6th disc as a 480 GB SSD.   I currently own WINDOWS 2012 R2 installed.   Windows 2012 sees the TB 5 x 2 as a 7.27 TB HDD and the 480 GB SSD as a second hard drive.

  I heard the Windows 2012 R2 storage solution is best.  I want to convert the TB 5 x 2 hard drives just so R2 2012 Windows can control it.  I have the following questions:

  1. What do I have to go in PERC 6 / I controller and remove the RAID 5 and create a virtual disk for each 2 TB as a RAID-0 disk drive so that Windows can see each as separate hard drive?

  2. each of the 2 TB is a SATA II drive.  PERC 6 / I can only support up to 2 TB to 3 Gbps.  What is the best way to do it?  Can I upgrade to SATA III drives or 6 Gbps?  This server which will support at all?  I have

  3. If I install a SATA III controller in the PCIe slot, how can I plug SATA III drives to the card.  All drives are connected to the server to forward now.

  4 If a disk fails, Dell R710 will still flash light orange on the forehead to show what defective hard drives?  People still hot to swap the drive?

  5. Windows 2012 R2 will be able to tell what defective hard drives?  With 5 x 2 to for the storage and 480 GB put in place in the SSD for tiered storage, which is the best way to configure it for performance?  Simple volume or mirror?  How many drives can fail until Windows cannot recover from the failure?

  Please advise on the best way to convert more software raid WINDOWS 2012 R2.  Thanks for the help in advance!

  1. This is the only way to make available to Windows as separate disks, as the PERC 6 does not support the RAID/JBOD.

  2. the PERC 6 supports a maximum drive size of 2 TB. The material is limited to 3 Gbps. You can use 6 GB/s drives, but they will operate as discs 3 Gbps.

  3. you will need to connect a cable from the backplane to the new controller, instead of the 6 PERC. Backplane may not support 6 GB/s speed, if you plug a controller 6Gbps 6Gbps drives and they bind upward to 3 Gbps, that is why.

  4. Yes.

  5. Yes. How can fail depends on how you have set it up and how much data is there.

• RAM upgrade for mid-2012 MacBook Pro question?

  So, I bought some RAM Corsair (2 x 8 GB) to install in my MacBook Pro for mid-2012. It has been well over a month now and I get freezes and flaws that were not there when the Apple RAM stock has already been installed. My question is... are it freezes and the seeds one result of the brand of RAM I have installed (Corsair) or the fact that I am superior to the amount of 8 GB of RAM recommended for this laptop of Apple to the particular address?

  Thank you.

  As you can see here, your MBP can, indeed, support for 16 GB of RAM. However, DIMMs must meet Apple specifications which are often much more demanding that really meant DIMMS for PC can meet. One of the advantages of buying from OWC (in the link) is that they provide 100% support so their products need to be designed with the Mac in mind. If you have no problem with DIMM Apple, but you do with Corsair DIMMS, I would say getting them replaced or, better yet, to get a refund.

• Server upgrade lower windows 2012 OEM license

  How downgrade WindowsServer 2012 OEM license, I need link and support for the same.

  Please help me.

  Hello

  I see that you posted your question on technet as well, this is the right forum for your question type as MS Answers is mostly for the support of 'consumer '.

  In any case, this is the information that I could find for you:

  If you buy Windows OEM Svr 2012 you can downgrade your OS to 2008 R2 2008.

  To downgrade, you have need to acquire Windows Svr 2008 Media and product key. Use the same media install and reach the local MS Activation Center indicating that you want to downgrade Windows Svr 2012 for 2008.

  Get a wil representing a help to downgrade it.

  For more information: http://download.microsoft.com/download/4/D/B/4DB352D1-C610-466A-9AAF-EEF4F4CFFF27/WS2012_Licensing-Pricing_FAQ.pdf

  I hope this helps.

  Kind regards

  Joel

• Keithley 6221 pilot - upgrade to labview 2009 to 2012

  Hello

  I use the Labview drivers provided by Keithley, to control a power supply Keithley 6221. They provide for LV 8 and 2009 versions, and I currently use 2009. However, I have to spend to LV 2012. Compatible drivers 2009 will be ok with LV 2012? This who should I look for?

  As you have to connect to the Web of Keithley site to download the drivers, I have attached to them.

  The drivers are provided with VISAS, so I don't expect upgrade problems around 2012.  The thing I noticed is that the files are set to read-only.  Disable via Windows Explorer so that you can compile mass screw before use.

• Using Exchange Admin Center with a server Exchange 2012 - R2 upgrade CU 8 in Chrome

  Hi all

  Having problem with Exchange Admin Center in Chrome.

  Maybe in relation to https://support.microsoft.com/en-us/kb/3001145

  I have EAC (Exchange Admin Center) through Chrome, the latest version 50 something, installation details for the transfer of a mailbox click Save after all details are entered, including recipients limit, open the mailbox details save and lo does here, no data has been saved.

  EAC works perfectly well on Firefox and IE 11.

  As stated in the title, the Exchange Server is Windows Server 2012 non - R2 upgrade CU 8 2012 updated of all the necessary server

  Now, I know that I am behind the curve for CU; I have here been hired recently, learned the system and were reluctant to make major system changes until I could get a feel for the network.

  What I'm looking for is for verification if I update to 12 CU, this resolution of my problem? I would spend on Firefox, the default browser, chrome.

  Any help is much appreciated, thank you.

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you your Question in Exchange for TechNet Forums.

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer

  Or here:

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral

  See you soon.

• The location of the file TestStand 2012 report variable

  Hello

  TestStand 2010 SP1, I have the "path to the report file' as one of the column in the database by using the RunState.Report.Location.  He worked until I upgraded to TestStand 2012.  The RunState.Report.Location is always empty.  I also tried to use the RunState.Root.Locals.ReportFilePath, but I get an error that it is an unknown variable when you connect to the database.  Even to remove the in the expression of path of file below, there is no difference.

  I use the following report file path expression:

  "C:\\TSReports\\------_Report [] [] [USE]" _.".

  Which variable contains the path of the report file in TestStand 2012.

  I have not tried, but RunState.Report.Location can work if you set the new discussion of the report and the database on False (assuming that the report is the first in the list) so you can be sure that the report was generated before you check this value.

  You must set set it up > result treatment > show more Options to see the options for new discussion.

  This should give access to the report path is displayed (the one with the check mark in the display column). However, in TS 2012, you can have any number of reports.

  There is a new recall, GetReportFilePath, you can add to your sequences to get the paths of the report they are committed. You can store the paths in a total station or varying lengths for use later, if necessary.

• use the 2012

  I upgraded to LabView 2012 and I noticed that when I run the VI, I get the Position tool instead of the tool to operate.

  Is there a way to change this to the tool displays during execution of the VI?

  Tom

  I found the answer here:

  http://forums.NI.com/T5/LabVIEW-beta-private/arrow-cursor-while-running-not-finger/m-p/1869577#M6821

  I'm sorry that I was not earlier during my research.

  Tom

• How to update Active directory 2003 to 2012

  My domain is based on windows 2003. I would like to improve my functional level of the domain to windows 2012.

  I know it's possible to add, domain controller extra 2008 to this field and update for 2008 and then for 2012.

  Please let me know it is possible to upgrade directly to 2012?

  Hi Mohammad,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  Hope this information helps.