Upgrading an Envy 15-j171nr with 8GB and 24GB SSD 16 GB cache
I'm a 15-j171nr with 8GB and 24 GB SSD cache. Whe I have it set to purchase the Configurator said the cache of 24GO was incompatible with more than 8 GB of RAM. 'Maintenance and Service of Guide' (p/n 733845-001) said the same thing on page 5:
«mSATA SSD»
Support for mSATA 24 GB SSD (not available on the computer equipped models with 16834 or 12288 MB of system memory or a 256 GB or 512 GB SSD)"
My questions are:
-How are they incompatible?
-How do you upgrade a 8 GB to 16 GB model during the withdrawal of the mSATA 24GO card?
The additional DIMM module is physically incompatible with the mSATA map, they install in remote locations. I guess it could be a thermal or issue of power but neither part draws a lot of power or generates a lot of heat. This is * not * a problem with software compatibility. How will I know? Because I advanced and installed the extra 8 GB DIMMS and the laptop continues to operate correctly, but now has 16 GB or RAM.
The question about the upgrade is because when you use the card as a cache mSATA configuring map mSATA and the mechanical drive as a RAID array. I guess when you remove the mSATA card you must rebuild the image of the operating system on the drive of 2.5 inches.
-Craig
Some people report if they switch to 16 gigs, they start to become quick start Intel and Intel Rapid Storage errors. If you're not, then you do not experience incompatibility. I think that HP will not sell 16 concerts with the WSSD of 24 concert because if you are using Intel Rapid Start the MSSD has contain the entire contents of the RAM and all the other files that have been stored there for hibernation. 24 concerts can be a little tight. Map of the WSSD is not accessible from the service Bay. It is hidden on the motherboard. You can actually slow down the main drive of the WSSD through the Intel Rapid Storage console. If you have installed 16 gigs and are having no problem just keep using the laptop and count you lucky. If you need assistance more let us know. I have a very similar model: the Envy 17-j029nr and played well with all the features of hard drive so I feel pretty good with her speed. HP it ready for me to facilitate a helping hand here on the Forum.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
Tags: Notebooks
Similar Questions
-
Since the last system upgraded my menu bar top with wifi and time, date etc etc is hidden unless I have sulk my cursor on it. Same thing with apps from shingles. How can I restore it is always there? bar menus hidden-how do I restore?
SystemPreferences-> Dock: automatically hide / show Dock
SystemPreferences-> general: automatically hide / show menu bar
-
Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!
Check your hosts file.
help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-
Database upgrade, migration of the platform with the DSO
Hi all
I use R12.1.2 with 10.2.0.4, HP - PA data RISK 64-bit operating system. I want to upgrade of database 11g r2 with ASM and want to migrate to RHEL5, 64-bit OS. Please suggest me the sequence how we proceed?
Thank you
KrishnaSalvation;
Thanks for the reply. According to the blog of oracle (http://blogs.oracle.com/stevenChan/entry/db_11gr2_11202_ebs ), HP - PA risk 64-bit is not yet certified with database 11 GR 2, so can we level database to GR 11, 2 on HP-UNIX or you recommend me to platform first migrate to Linux, so I must improve my database.
If your platform doesn't certified not its average don't make this migration. If your exsisting server not certified with 11 GR 2 so first migrate your db upgrade
Respect of
HELIOS -
Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.
Sorted now
-
I've read about problems with Illustrator and photoshop on EL Capitan, but these seem to be in October 2015. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5. Can not afford to go to CC. I have a Macbook Pro.
CS5 and 10.11 are not supported and will never be supported by Adobe or Apple.
However it works for some, more actually, but not all. There are sporadic problems with Illustrator, Photoshop seems to be the best. Do not expect an improvement and keep in mind that anyone from Adobe, Apple or anywhere else will fix it.
Do a clean install
Make sure you have the Apple Java
h ttps://support.Apple.com/kb/DL1572?locale=en_US
Make sure you have your serial number and if you are having problems with the serial number or the serialization however adobe of web server will not support your problem.
update the application via photoshop.
-
Just upgraded to FF 12 FF 3.6 and most of my favicons are now places dotted. Is it possible to get favicons associated with each web site to load? I've seen some suggested code to add, but I'm not savvy web code. Thank you!
The extension of CheckPlaces can restore the favicons. It is also ideal for checking the bookmarks to make sure they are still valid.
-
Just installed windows 7 on a hpp6130y that I bought in August came with free Windows 7 upgrade after installation I lost microsoft works and other software that has been pre loaded on pc.
How your post is related to Windows Update (compared to the Windows upgrade)?
Contact HP support.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I bought a laptop with vista and I was told I have to upgrade to windows 7 free. How do I do that?
http://www.Microsoft.com/Windows/buy/offers/upgrade-option.aspx
Above Microsoft link has info for the Windows 7 upgrade Options from the various participating computer manufacturers.
Read the info here to see if you qualify.http://www.Microsoft.com/Windows/buy/offers/upgrade-FAQ-option.aspx
FAQ about the upgrade is at the link above.
http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx
Railways upgrade to Windows 7 at the link above.
For any other question of Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 forum for questions on windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
HP ENVY 700-000z Desktop PC with 8 and the need to know if I can install Windows 7
Just bought HP ENVY 700-000z Desktop PC equipped with 8 and need to know if I can install Windows 7 on this computer without problem. My work does not allow the use of Windows 8. If I can install Windows 7, what version of operating system do I need to buy to do a clean install.
If I understand correctly, I could order the Windows 8 Pro, who has right to demotion and then install Windows
7 pro, I have then I should be able to get the drivers, I need HP is correct.
WARNING *.
HP does not recommend installing Windows 7 on a computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.
Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.
You should ENABLE 'Secure Boot' and maybe 'Legacy Support' in the 'BIOS Setup boot secured' on the settings page below, before you try to install Windows 7;
or
In addition, as the hard drive is partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" in the start menu "F9". If "UEFI - CD/DVD drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.
I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive.
Most of the Windows 7 drivers from the drivers of HP Pavilion p7-1299 c desktop PC page should work on your desktop HP ENVY 700 - 000z CTO. Both models use a variant of the motherboard HP Jasmine. If you have missing or unknown devices after installing the drivers, please post the "Hardware ID" Device Manager for devices as shown in the example below.
If you have any other questions, feel free to ask.
Please click the White Star of KUDOS to show your appreciation
-
I have the laptop Latitude 630 with Vista and want to upgrade to Windows 7. This laptop will be able to upgrade to Windows 7?
original title: to upgradeHello
Read this information before you buy Windows 7:
"Windows 7 Upgrade Advisor.
http://www.Microsoft.com/download/en/details.aspx?ID=20
"Windows 7 system requirements"
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
And here is the site of Dell to see if Dell has Windows 7 drivers available for your model
http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection
See you soon.
-
Install windows 7 in Envy DV7-7234 with Windows 8 with win7 dual boot and windows 8
I can install windows 7 in Envy DV7-7234 with Windows 8 buth with dual boot: win7 and windows 8?
Installing Windows 7 on your HP ENVY computer Notebook dv7-7234nr is not supported by HP. In addition, no Windows 7 driver is listed on HP Software and Driver Downloads page for your computer.
HP does not recommend installing Windows 7 and it will support the installation of Windows 7 on a computer comes with Windows 8. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not support some of the hardware or software designed for the computer.
Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.
You will need to DISABLE 'Secure Boot' and ENABLE 'Legacy Support' in the ' settings of BIOS ' settings below page;
Then, start Windows 8 and run the console 'disk management '. Using "Shrink Volume", reducing the size of the "C:" partition about half of its original size. Name of the partition "C:" to something like "Windows 8". Now, start the computer from the Windows 7 DVD, making sure to select "UEFI - internal CD/DVD" or "UEFI - ATAPI CD/DVD ' and not ' Legacy - CD/DVD internal." (I recommend using a disc of Windows 7 SP1latest drivers have been included in this topic. The use of the SP1 disc usually resolves most disk hard AF and other issues. )
Install Windows 7 on the partition without label that was established earlier when you shrunk the partition "C:". Continue to install WIndows 7 by / responding to all the guests. Once you download Windows 7 on your computer, we have to track down the compatible drivers for it. Please list all the "hardware ID" for unknown or missing devices.
Please send Bravo
-
At the old version of adobe reader and upgrade inadvertently WAA CD player. realized that I could change is no longer with this and tried to uninstall and reinstall and older versiono, but could not. Tried to reinstall the domain controller new version and it would not, indicating that the newer Version is already installed. Nothing in programs and features.
Looks like a job for the cleaning tool: Download Adobe Reader and Acrobat tool - Adobe Labs.
If you prefer XI player, make sure that "Install updates automatically" is not enabled under Edit > Preferences > Updater. It is possible to download and apply patches manually.
-
Hi all!
I bought the HP ENVY 15 t-j000 Quad Edition and opted for the WSSD 24Go cache as well as the hybrid drive 1 TB. Do I have a problem just buy a kit of cloning and spend the hybrid propulsion system to a full on SSD in the future if I choose to?
I did some research but I can't isolate an answer if yes or no I might encounter problems on account of the Intel RST be "associated" with the traditional HARD drive caching.
So I wonder if I can't just simply disable acceleration of RST, clone HARD drive for an SSD via a cloning kit, remove the HARD and the SSD drive and call it a day?
Any help with this is appreciated!
Purgingomen wrote:
Thanks for the info but I was even more so, I was wondering if I would have a problem Exchange with a new SSD hybrid drive later by cloning.
I thought that I would stick with the 8 GB of RAM and WSSD combo of cache/HDD for now and sometimes down the line (as in a year or two) to get rid of the HARD drive for a full on SSD, disable caching and at the same time move to 16 GB of RAM.
But I don't know if yes or no the WSSD cache/HDD combo makes it difficult to clone and swap the HARD drive and then just leave the disc of "cache" of 24 gigas (which is more a cache drive) there to be upgraded later.
-Rob
Well, I think a pure 2.5 "SSD should work on the system but make sure the cache is removed. For the purposes of cloning, I suggest using the DD command:
-
I have problems with libraries and events in final cut pro
I use Final Cut Pro X. was used for 3 or 4 years. I just upgraded to latest version 10.2.3 and I use it on an iMac running El Capitan. The way in which the library is set up is very confusing to me and I can't seem to follow the events and projects on individual drives. It seems all the events and projects are bundled in the libraries, but I can't see them on my hard drive to move or archive them individually.
And they take almost all of my hard drive.
I am use to working with events on a separate hard drive, but now I can't seem to put the files on a separate hard drive.
Just looking for advice or direction here.
Thank you!
Looks like you were using an older version of FCP X?
Things have changed a bit to quit.
Start by reading this:
Update your libraries of Final Cut Pro X to Final Cut Pro X 10.1 and later versions - Apple Support
Al
Maybe you are looking for
-
Checkboxes in iTunes 12.4
Hoping that someone out there can help me. My iMac is updated to the latest version of iTunes and my MacBookPro is not. My MacBookPro has the option on my new playlists to show checkboxes next to each song, that my iMac does not have this menu drop-d
-
My normal usage for Skype is chatting with my friends all in game. I had a computer windows laptop with pre-installed Skype 8. It works fine until I have tab out. I hear my friends but they don't hear me. Tried everything, but it still seems to work
-
OCR for Officejet 4620 on Mac OS x 10.9
OfficeJet 4620 leaves me no scan without OCR software - who tell me how to do. Mac OS X 10.9. Help?
-
My Windows Live Mail says that it is not able to connect
I use Windows Live Mail as my client of e-mail for about 2 years and it worked fine. All of a sudden, he is no longer sends and receives. I get the message "cannot send or receive messages for the hotmail account (my account I can't enter here) to
-
C7250 connected wireless works with wired ethernet PC but not wireless PC
C7250 installs fine with static IP address and wired (ethernet) PC works perfectly, but is not recognized by the PC wireless. Can ping the IP of the PC cable but not wireless computers. Can connect to the IP address of the browser and can logon to th