urgent: cannot startup the database to unix Server

Hi... I am facing a problem treamendous...

to stop the database (unix environment), I connected through Putty and from there to the opening of session sysdba, I gave the command "SHUTDOWN IMMEDIATE.

but after it all of a sudden the power outage occurred and my local computer where access to the unix server, I got the closure...

After the reboot, when I go again Putty and connected on the server and login sysdba, oracle11g given the command, ' OPEN ', then it shows error...

SQL > startup open
ORA-10997: another start/stop operation this instance InProgress
ORA-09968: cannot lock file
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: 29770


Please help... its very urgent...

sqlplus
/ as sysdba
the judgment
startup
output

Tags: Database

Similar Questions

  • DBCA cannot create the database in 12 c in Windows

    Hello

    After the installation of Oracle 12 c on R2 Windows Server 2012 and successfully running the netca command to configure the listener, I run with the DBCA tool question

    It throws an error message of "Recovery Manager could not restore the data files"

    I looked at the log files, here is some information:

    Corrupt block 1 found during the backup piece, reading file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, corr_type = 4

    Review of blocknum = 1, file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, found the same corrupted data

    Not sure if this helps, but I am attaching several log files to help debug the problem.

    I read the post DBCA cannot create the database in 12 c, but it doesn't quite have an answer.

    Any help is appreciated.

    Thank you

    Pranav

    Looks like a bad installation or a bad block on your disk. Have you tried creative using the "Custom Database" model in the wizard dbca (one that does not come with the data files)? It will take more time to create, but shouldn't read the dbca reported as corrupted file

  • ColdFusion 10 - cannot create the database

    I think that this error has to do with permissions, but I'm not sure.  I'm not under personal service accounts to run IIS 7.5 or Coldfusion.  There is some dirt on my server and Setup:

    Server productColdFusion
    VersionColdFusion 10,282913
    EditionDeveloper
    Operating systemWindows Server 2008 R2
    OS version6.1
    Update level/C:/ColdFusion10/cfusion/lib/updates/chf10000002.jar
    Version of the Adobe driver4.1 (build 0001)

    Details of the JVM

    Java version1.6.0_29

    History of this server:

    A installed version 9.0.1.  Installled CF 10 Beta and then uninstalled beta 9 and 10 to install 10 final.  Ran into a problem with IIS 7.5 refusing to release some settings somewhere deep beyond web.config files so it was a dev server I simply uninstalled IIS 7.5 role and also uninstalled WAS, wonderful Windows Process Activation Service, test function (if it is really what it is... more as a burden IMO) and delete the files C:\ColdfusionX and C:\inetpub to purge settings and garbage.  I then rebooted and again installed IIS and WAS.  The previous problem had nothing to do with the substance of data base, it was the IIS for CF 10 connector not properly be created and applied by IIS, resulting in .cfm files offered for download.

    After all the changes, I was able to connect to the CF admin date to which I applied the update of 10 CF 2.  Web server here on out stuff is practically install stock.

    I created the directory C:/ColdFusion10/cfusion/db/andHalt/and then to data sources to create the embedded Apache Derby database.

    Error just after the attempt to create the data source:

    Connection verification failed for data source: andHalt

    org.apache.derby.impl.jdbc.EmbedSQLException: cannot create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

    The root cause was that: java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

    Logs show a very little bit of detail that does not help me to find a crowd of CF related Google goodies so I come here to read more in the knowledge depth and because Murphy's law still nips at my heels I'm always towing in good errors for the people gawk and awk to

    Sun Oct 14 22:58:03 CDT 2012 Thread [Thread-24, 5, main] cleanup from action

    java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

    at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)

    at org.apache.derby.impl.jdbc.Util.newEmbedSQLException (unknown Source)

    at org.apache.derby.impl.jdbc.Util.seeNextException (unknown Source)

    at org.apache.derby.impl.jdbc.EmbedConnection.createDatabase (unknown Source)

    to org.apache.derby.impl.jdbc.EmbedConnection. < init >(Unknown Source)

    to org.apache.derby.impl.jdbc.EmbedConnection30. < init >(Unknown Source)

    to org.apache.derby.impl.jdbc.EmbedConnection40. < init >(Unknown Source)

    at org.apache.derby.jdbc.Driver40.getNewEmbedConnection (unknown Source)

    at org.apache.derby.jdbc.InternalDriver.connect (unknown Source)

    at org.apache.derby.jdbc.EmbeddedDriver.connect (unknown Source)

    at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:614)

    to coldfusion.server.j2ee.sql.pool.ConnectionRunner$ RunnableConnection.run (ConnectionRunner. java: 67)

    at java.lang.Thread.run(Thread.java:662)

    Caused by: java.sql.SQLException: unable to create the database "C: / ColdFusion10/cfusion/db/andHalt /', see the following exception for more details."

    at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)

    at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)

    ... 13 more

    Caused by: java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

    at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)

    at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)

    at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)

    at org.apache.derby.impl.jdbc.Util.generateCsSQLException (unknown Source)

    at org.apache.derby.impl.jdbc.TransactionResourceImpl.wrapInSQLException (unknown Source)

    at org.apache.derby.impl.jdbc.TransactionResourceImpl.handleException (unknown Source)

    at org.apache.derby.impl.jdbc.EmbedConnection.handleException (unknown Source)

    ... more than 10

    Caused by: ERROR XBM0A: the directory database "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

    at org.apache.derby.iapi.error.StandardException.newException (unknown Source)

    at org.apache.derby.impl.services.monitor.StorageFactoryService.vetService (unknown Source)

    to org.apache.derby.impl.services.monitor.StorageFactoryService.access$ 600 (unknown Source)

    to org.apache.derby.impl.services.monitor.StorageFactoryService$ 9.run (unknown Source)

    at java.security.AccessController.doPrivileged (Native Method)

    at org.apache.derby.impl.services.monitor.StorageFactoryService.createServiceRoot (unknown Source)

    at org.apache.derby.impl.services.monitor.BaseMonitor.bootService (unknown Source)

    at org.apache.derby.impl.services.monitor.BaseMonitor.createPersistentService (unknown Source)

    at org.apache.derby.iapi.services.monitor.Monitor.createPersistentService (unknown Source)

    ... more than 10

    = launch nested exception, level (1) =.

    java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

    at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)

    at org.apache.derby.impl.jdbc.Util.generateCsSQLException (unknown Source)

    at org.apache.derby.impl.jdbc.TransactionResourceImpl.wrapInSQLException (unknown Source)

    at org.apache.derby.impl.jdbc.TransactionResourceImpl.handleException (unknown Source)

    at org.apache.derby.impl.jdbc.EmbedConnection.handleException (unknown Source)

    at org.apache.derby.impl.jdbc.EmbedConnection.createDatabase (unknown Source)

    to org.apache.derby.impl.jdbc.EmbedConnection. < init >(Unknown Source)

    to org.apache.derby.impl.jdbc.EmbedConnection30. < init >(Unknown Source)

    to org.apache.derby.impl.jdbc.EmbedConnection40. < init >(Unknown Source)

    at org.apache.derby.jdbc.Driver40.getNewEmbedConnection (unknown Source)

    at org.apache.derby.jdbc.InternalDriver.connect (unknown Source)

    at org.apache.derby.jdbc.EmbeddedDriver.connect (unknown Source)

    at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:614)

    to coldfusion.server.j2ee.sql.pool.ConnectionRunner$ RunnableConnection.run (ConnectionRunner. java: 67)

    at java.lang.Thread.run(Thread.java:662)

    Caused by: java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

    at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)

    at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)

    ... 15 more

    Caused by: ERROR XBM0A: the directory database "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

    at org.apache.derby.iapi.error.StandardException.newException (unknown Source)

    at org.apache.derby.impl.services.monitor.StorageFactoryService.vetService (unknown Source)

    to org.apache.derby.impl.services.monitor.StorageFactoryService.access$ 600 (unknown Source)

    to org.apache.derby.impl.services.monitor.StorageFactoryService$ 9.run (unknown Source)

    at java.security.AccessController.doPrivileged (Native Method)

    at org.apache.derby.impl.services.monitor.StorageFactoryService.createServiceRoot (unknown Source)

    at org.apache.derby.impl.services.monitor.BaseMonitor.bootService (unknown Source)

    at org.apache.derby.impl.services.monitor.BaseMonitor.createPersistentService (unknown Source)

    at org.apache.derby.iapi.services.monitor.Monitor.createPersistentService (unknown Source)

    ... more than 10

    = end of the nested exception, level (1) =.

    = launch nested exception, level (2) =.

    java.sql.SQLException: the database directory "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

    at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException (unknown Source)

    at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA (unknown Source)

    at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException (unknown Source)

    at org.apache.derby.impl.jdbc.Util.generateCsSQLException (unknown Source)

    at org.apache.derby.impl.jdbc.TransactionResourceImpl.wrapInSQLException (unknown Source)

    at org.apache.derby.impl.jdbc.TransactionResourceImpl.handleException (unknown Source)

    at org.apache.derby.impl.jdbc.EmbedConnection.handleException (unknown Source)

    at org.apache.derby.impl.jdbc.EmbedConnection.createDatabase (unknown Source)

    to org.apache.derby.impl.jdbc.EmbedConnection. < init >(Unknown Source)

    to org.apache.derby.impl.jdbc.EmbedConnection30. < init >(Unknown Source)

    to org.apache.derby.impl.jdbc.EmbedConnection40. < init >(Unknown Source)

    at org.apache.derby.jdbc.Driver40.getNewEmbedConnection (unknown Source)

    at org.apache.derby.jdbc.InternalDriver.connect (unknown Source)

    at org.apache.derby.jdbc.EmbeddedDriver.connect (unknown Source)

    at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:614)

    to coldfusion.server.j2ee.sql.pool.ConnectionRunner$ RunnableConnection.run (ConnectionRunner. java: 67)

    at java.lang.Thread.run(Thread.java:662)

    Caused by: ERROR XBM0A: the directory database "C:\ColdFusion10\cfusion\db\andHalt" exist. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

    at org.apache.derby.iapi.error.StandardException.newException (unknown Source)

    at org.apache.derby.impl.services.monitor.StorageFactoryService.vetService (unknown Source)

    to org.apache.derby.impl.services.monitor.StorageFactoryService.access$ 600 (unknown Source)

    to org.apache.derby.impl.services.monitor.StorageFactoryService$ 9.run (unknown Source)

    at java.security.AccessController.doPrivileged (Native Method)

    at org.apache.derby.impl.services.monitor.StorageFactoryService.createServiceRoot (unknown Source)

    at org.apache.derby.impl.services.monitor.BaseMonitor.bootService (unknown Source)

    at org.apache.derby.impl.services.monitor.BaseMonitor.createPersistentService (unknown Source)

    at org.apache.derby.iapi.services.monitor.Monitor.createPersistentService (unknown Source)

    ... more than 10

    = end of the nested exception, level (2) =.

    = launch nested exception, level (3) =.

    ERROR XBM0A: The directory of database 'C:\ColdFusion10\cfusion\db\andHalt' exists. However, it does not contain the file expected 'service.properties '. Perhaps, Derby has been reduced in the middle of the creation of this database. You can remove this directory and try again to create the database.

    at org.apache.derby.iapi.error.StandardException.newException (unknown Source)

    at org.apache.derby.impl.services.monitor.StorageFactoryService.vetService (unknown Source)

    to org.apache.derby.impl.services.monitor.StorageFactoryService.access$ 600 (unknown Source)

    to org.apache.derby.impl.services.monitor.StorageFactoryService$ 9.run (unknown Source)

    at java.security.AccessController.doPrivileged (Native Method)

    at org.apache.derby.impl.services.monitor.StorageFactoryService.createServiceRoot (unknown Source)

    at org.apache.derby.impl.services.monitor.BaseMonitor.bootService (unknown Source)

    at org.apache.derby.impl.services.monitor.BaseMonitor.createPersistentService (unknown Source)

    at org.apache.derby.iapi.services.monitor.Monitor.createPersistentService (unknown Source)

    at org.apache.derby.impl.jdbc.EmbedConnection.createDatabase (unknown Source)

    to org.apache.derby.impl.jdbc.EmbedConnection. < init >(Unknown Source)

    to org.apache.derby.impl.jdbc.EmbedConnection30. < init >(Unknown Source)

    to org.apache.derby.impl.jdbc.EmbedConnection40. < init >(Unknown Source)

    at org.apache.derby.jdbc.Driver40.getNewEmbedConnection (unknown Source)

    at org.apache.derby.jdbc.InternalDriver.connect (unknown Source)

    at org.apache.derby.jdbc.EmbeddedDriver.connect (unknown Source)

    at coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:614)

    to coldfusion.server.j2ee.sql.pool.ConnectionRunner$ RunnableConnection.run (ConnectionRunner. java: 67)

    at java.lang.Thread.run(Thread.java:662)

    = end of the nested exception, level (3) =.

    Complete cleaning action

    Ah shucks!  I can't believe how far from the solution I was looking for.  Documentation has revealed what I had to do it even if it honestly should have probably been better treated with the best comments of the error.

    http://help.Adobe.com/en_US/ColdFusion/10.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7FD a.html

    "Note: when you add an Apache Derby Embedded data source, verify that the specified directory does not exist."

    Which is a bit ridiculous given a fileOpen dialog box is provided which means just the opposite.

    I came across this problem before CF 9 awhile back and I am surprised it is still hidden and I had forgotten about it.

  • domain controller Server 2003 giving cactiveadministratoragent cannot open the database errors

    The application log on one of our domain controllers fills error every 15 minutes about:

    CActiveAdministratorAgent::DoAgentWork - failed to open the database.
    [DBNETLIB] [ConnectionOpen(connect()) (Connect()).] SQL Server is not, or access is denied.
    Error = - 2147467259.

    Post in the Windows Server Forums:
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

  • Cannot install the behavior extension for server and database for Dreamweaver CC 2014

    Hello

    I try to install the server behavior & extension of the database in my CC of Dreamweaver 2014 of the trial.  I've added it to https://creative.adobe.com/addons/patches/2176#.VGJ7TvnF-DA and it shows I have, but it has not yet appear in Dreamweaver.  I followed the steps outlined in the troubleshooting list:

    Internet works

    The application is compatible with the addon

    The application of CC desktop is installed and running

    Synchronization of files is enabled

    After that, I tried to install it through the Adobe Extension Manager.  As soon as I loaded up the Manager has crashed.  Whenever I open it crashes immediately.  Here is the error report:

    Signature of the problem:

    Problem event name: APPCRASH

    Name of the application: Adobe Extension Manager CC.exe

    Application version: 7.3.2.0

    Application timestamp: 5423f0ba

    Fault Module name: MSVCR100.dll

    Fault Module Version: 10.0.40219.325

    Timestamp of Module error: 4df2be1e

    Exception code: 40000015

    Exception offset: 0008d6fd

    OS version: 6.3.9600.2.0.0.256.4

    Locale ID: 1033

    Additional information 1: 9b2b

    More information 2: 9b2bdea32afaae877182c5486bcda189

    3 more information: f7dd

    Additional information 4: f7dd51dc76fb06d86332126480a431b7

    I then removed my addons, then deleted and reinstalled the extensions Manager.  As soon as I tried to open the Manager it still crashes.

    Any ideas?

    Running Windows 8.1

    Thank you

    -James

    Try the following.

    1. Uninstall the current extension.
    2. Install the DMXZone extensions Manager
    3. Using the extension Manager DMXZone, install the connections/data server behaviors panel

  • Cannot start the database because of the archivelogs

    We use Oracle 11 g R2.

    We put the archivelogs on June 1, 2011. The archivelogs took all the space available on the server, so we got the error:
    Status: Opened but not available
    Details: Archive is unable to archive a redo log because the output device is full or inaccessible. The instance is open.

    I backed up the archives and remove them from the flash_recovery_area.

    Still, the database does not start. I had to stop immediately, but I can't connect through OEM or sqlplus.

    SQLPLUS was told that shutdown is not yet complete.

    OEM say status is wound down, but when I do a startup, I get this

    SQL > connect to an idle instance.
    SQL > SQL > ORA-01012: not connected
    Disconnected


    Can anyone help? It is urgent. There are many applications that run on the database.

    Elsie says:
    We use Oracle 11 g R2.

    We put the archivelogs on June 1, 2011. The archivelogs took all the space available on the server, so we got the error:
    Status: Opened but not available
    Details: Archive is unable to archive a redo log because the output device is full or inaccessible. The instance is open.

    I backed up the archives and remove them from the flash_recovery_area.

    Still, the database does not start. I had to stop immediately, but I can't connect through OEM or sqlplus.

    SQLPLUS was told that shutdown is not yet complete.

    OEM say status is wound down, but when I do a startup, I get this

    SQL > connect to an idle instance.
    SQL > SQL > ORA-01012: not connected
    Disconnected

    Can anyone help? It is urgent. There are many applications that run on the database.

    If you have removed the archivelogs at the operating system level, this fact was not in the rman catalog in the control file.

    c:> rman target /
rman> crosscheck archivelog all;
rman> delete noprompt expired archivelog all;

    And now you have remove these logs if you don't back them up you are sunk. Take a full backup immediately.

    Then put in your backup rman script commands to the archivelogs backup and remove them after that that they are saved. The details are in the documents to tahiti.oracle.com

    BTW, this is a community of volunteers. If you have "urgent" that you will need to open a SR with oracle and deal with people who are paid to deal with "emergency".

  • Bad system setting, cannot start the database

    Hello, I have problem with start my database

    C:\Users\Raw>sqlplus "/ as sysdba"


SQL*Plus: Release 11.2.0.1.0 Production on Thu May 28 15:23:34 2015


Copyright (c) 1982, 2010, Oracle.  All rights reserved.


Connected to an idle instance.

SQL> startup
ORACLE instance started.


Total System Global Area 1068937216 bytes
Fixed Size                  2182592 bytes
Variable Size             587203136 bytes
Database Buffers          473956352 bytes
Redo Buffers                5595136 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-30012: undo tablespace 'UNDOTS3' does not exist or of wrong type
Process ID: 2716
Session ID: 5 Serial number: 3

SQL> startup mount
ORACLE instance started.


Total System Global Area 1068937216 bytes
Fixed Size                  2182592 bytes
Variable Size             587203136 bytes
Database Buffers          473956352 bytes
Redo Buffers                5595136 bytes
Database mounted.
SQL> show parameter undo


NAME                                 TYPE        VALUE
------------------------------------ ----------- ------------------------------
undo_management                      string      AUTO
undo_retention                       integer     900
undo_tablespace                      string      UNDOTS3
SQL> select * from v$tablespace;


       TS# NAME                           INC BIG FLA ENC
---------- ------------------------------ --- --- --- ---
         0 SYSTEM                         YES NO  YES
         1 SYSAUX                         YES NO  YES
         2 UNDOTBS1                       YES NO  YES
         4 USERS                          YES NO  YES
         3 TEMP                           NO  NO  YES
         6 ARB_TABLESPACE                 YES NO  YES
         7 ARB2_TABLESPACE                YES NO  YES
         5 UNDOTBS2                       YES NO  YES
         8 TEMP2                          NO  NO  YES
         9 UNDOTBS3                       YES NO  YES


10 rows selected.


SQL> alter system set undo_tablespace=UNDOTBS3 scope=both;
alter system set undo_tablespace=UNDOTBS3 scope=both
*
ERROR at line 1:
ORA-02097: parameter cannot be modified because specified value is invalid
ORA-01219: database not open: queries allowed on fixed tables/views only

SQL> alter database open
  2  ;
alter database open
*
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-30012: undo tablespace 'UNDOTS3' does not exist or of wrong type
Process ID: 1128
Session ID: 5 Serial number: 3

SQL>

    When I have a parameter not valid, the I often resolve when the database does not open is to simply create a pfile the spfile file:

    sqlplus

    Connect / as sysdba

    create pfile='/home/oracle/pfile.txt 'to spfile='/u01/app/oracle/product/12.1.0.2/dbs/spfileorcl.ora ';

    Then use a text editor to fix the value of the parameter. When done, save the changes. Then create spfile from pfile this and you should be able to start the instance.

    create spfile='/u01/app/oracle/product/12.1.0.2/dbs/spfileorcl.ora 'to pfile='/home/oracle/pfile.txt ';

    startup

    HTH,

    Brian

  • Cannot start the database the R12 DR Oracle EBS of RAC 10 g R2 using SRVCTL

    Hello

    I've implemented Oracle 10g R2 RAC data DR Guard for main server Oracle 10 g R2 RAC for EBS R12 (12.0.4).
    I followed Note + ' Business Continuity for Oracle Applications Release 12 on Release 10 gr 2 - Single Instance Database and RAC [452056.1 ID]. +.
    After you configure DR DG, I added DR Database to the Configuration of the Cluster. But I'm not able to start the DR Database via SRVCTL. But able to start the DR Database through Sql * more. I have already mentioned Note: + troubleshooting when srvctl cannot start the RAC instance, but sqlplus can start [ID 844272.1] + and tried to solve the problem but without success.

    , I opened SR but still, the problem is not resolved. Are there steps I need to do that is not mentioned in Note 452056.1.

    Rgds,
    Thiru

    Have you reviewed these docs?

    CRS - 215 srvctl cannot start ASM, listener, %ORACLE_HOME%/bin/ resources RDBMS with error [740319.1 ID]
    Could not start the Instance with Srvctl, no Info in the newspapers of Imon [ID 741212.1]

    Thank you
    Hussein

  • Cannot start the database instance - cannot open the spfile

    Here's what I did, that lead to a problem starting my database instance. It is a database that I just load data, and I do not have a backup yet :-(

    I created a structure for a new database and data loaded from a different database, which has been a very long process of becasus of the amount of data.

    Today, I decided to create a model of this database by using the Configuration Wizard.

    Before you begin the management of models, I decided to remove an old database that was never created correctly. I used the Setup Wizard to remove this database and got an error that SPFILEROVM. There is no such thing as ORA. But the removal has completed, and I worry too much.

    Then, I started to create my GoodDatabase model. I stopped with the message again that the SPFILEROVM. ORA (from the old database) did not exist. But it is already stopped my GoodDatabase and I can't restart. I use OEM Database Control for restart, but I get the complaint about the SPFILEROVM once again. ORA of the old database. How can I solve this problem? The error of OEM is attached below. The database is under Windows Server 2003. I can connect in OEM to another database instance (orcle) but I do not have the OEM rack.

    Thanks in advance.


    SQL * more: release 10.2.0.3.0 - Production the Sea 2 08:42:15 Feb 2011

    SQL > SQL > connect to an idle instance.
    SQL > ORA-01078: failure in the treatment of system settings
    ORA-01565: error to identify the file ' F:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\SPFILEROVM. ORA'
    ORA-27041: could not open the file
    04002 - OSD: could not open the file
    S/O-error: (OS 2) the system cannot find the file specified.
    Disconnected

    1 find the log of alerts for this instance
    2. look for the section where the database is put into service. All default settings will be listed here. Copy the parameters by using Ctrl + c
    3. create a file F:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\initrovm.ora
    4. Paste the settings in this file
    5. start a dos commands prompt
    6 set oracle_sid = rovm
    7 sqlplus / as sysdba
    8. create spfile from pfile

    Your database must begin now.

    -----------
    Sybrand Bakker
    Senior Oracle DBA

  • Portege R600 - cannot update the BIOS using Win server 2008

    Hi all.

    Pls help...

    I tried to update my bios to the new version, but I can't.

    I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:

    Package for the TOSHIBA BIOS ver.3.2.9
    Unsupported product type is installed.
    Package BIOS BIOS Version: Ver.1.80
    Current BIOS version: Ver.1.40

    So my question is what am I doing wrong? I'm trying to update my bios from windows.

    is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)

    Thank you.

    Hello

    Your OS windows seems not to be the Windows which was preinstalled on your Portege
    You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64

    You will need to put the system which has been pre-installed by Toshiba

    Good bye

  • Cannot create the user in SQL Server 2008 physical model

    When I'm on the right, click relationship models-> Relational_1-> physical models-> SQL Server 2008-> database-> users, 'New' (which is the only option) is greyed out and I can not add users.  In versions 4.0 EA, I was able to create users.  This feature has been removed from SQL Server?  I work in a mixed shop and we chose SDDM because it could support Oracle and Microsoft. And I am now ready to migrate everything from Oracle Designer to SDDM and it seems that some of the featrures of SQL Server have been removed.

    Hi Marcus,

    any object login - tree of the physical model of SQL Server consists of:

    -Databases

    - Connections

    -Tables

    -Views

    - ...

    If you need to create a connection in the connections series and in its dialog box you will find related tab.

    Philippe

  • VMware Clod Migration boot cd for the database Migration SQL Server

    Hi techies,.

    I have a requirement to migrate one of our physical DB server to the virtual machine, it is very important to business so I thought to go with cold cloning with boot cd, but I could not get this cd bootable anywhere... ! can someone help me on this? and also please suggest me there at - it another way, I can do this task successfully with some fails?

    VMware Converter 5.x has the ability work synchronize to power use this run a p2v migration

    (1) perform a P2v full and when its done and you're ready to cut more

    (2) stop the database service and do a synchronizaion and put the virtual machine online

  • Cannot start the database

    I'm not able to restart the database.
    SQL > shutdown immediate
    ORA-01109: database is not open

    The database is dismounted.
    ORACLE instance stops.

    SQL > startup
    ORACLE instance started.

    Mounted database.
    ORA-16038: log sequence 1 # 1583 can be archived
    ORA-19809: limit exceeded for file recovery
    ORA-00312: thread 1 1 online journal: ' D:\ORCL\FILES\REDO01. JOURNAL"

    Even while your instance is in EDITING mode, run:
    view the log_archive_dest parameter
    Show parameter db_recovery_file_dest

    Go into these directories, find and delete the files from your *.arc

  • Restore the database on new server

    I have Oracle 10 g on AIX 5.3
    I perform the backup hot by script every week.
    A user makes me know that the accident he has deleted a table. Because I only use the standard version, I can use the flashback table to restore the lost data.
    Under the guidance of askTom for similar cases raised by others, Tom said that cloning the db to the new location and export that data to the old server are the only way can do.
    The data in the table of the deleted user not be updated frequently, so I only need to apply all the data files in the last backup, no need to apply the archivelog.

    My colleague helping me duplicate data files to the new location. The new server has installed Oracle and the configuration is the same as the old server.
    But can I know the steps what I can do to clone the database in the best way? (no need to apply archivelog)

    Thank you very much

    If I restore the database up to the 15/05 01:05, I do not know what newspapers of archiving backup must be copied to new servers (the new server has limited the size, I can't copy all the logs to archive on the server).

    Depends on if you are allowed to lose some data. In the case opposite and you all data just before that the data has been deleted, you need to recover up to 22/05 16:59 you need all the archives logs from 15/05 01:05 to 22/05 16:59.

    You can consult the archives of the information for journal of v$ archived_log view on the main database using next_time between the time of hot backup and 22/05 17:00.

    Anand

  • Migrating the database from one server to another..., what are the impacts?

    Hello

    We currently have our Hyperion (workspace, planning, essbase) environment on a single windows server. The associated database (Oracle) with it is on another Windows Server.

    The platform will be shared, and for this, the database will be migrated on the server of hyperion. During the process, its name will be changed (but the users/schemas/password will remain)

    How to make the platform Hyperion welcomes such a change? The server name can be changed somehow in the configuration? Or do we reinstall us from scratch, the application?

    Thanks in advance for your help. Best regards.

    There is no need to re install, you will have to reconfigure all products with the new name of the host of the database by running the configuration utility, when you are prompted to use select existing table.
    Once Setup is complete for planning, you must change the information in the database for each application by modifying the database,

    Version number will be a real help here.

    See you soon... !!

Maybe you are looking for