usable RAM is less to installed in the Virtual Machine

Similar Questions

• can OEM 12 c installed on the virtual machines?

  I checked the oracle about the 12 c OEM documentation and seems doesn't not accurate if we can use the virtual machines or not. But because so many components have to be installed and configured, I would like to know if anyone knows this here.
  
  Thanks in advance.

  Yes OEM12c can be installed on the virtual machines.

  You can also see URL below for more details

  https://Apex.Oracle.com/pls/Apex/f?p=44785:24:0:no:24:P24_CONTENT_ID, P24_PREV_PAGE:6432, 2

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• Oracle installed on the virtual machine

  Hello world!
  
  In one of the server, Oracle is installed on a virtual machine.
  
  I have to make a change in the way I set up the file settings or something else to improve performance?
  
  What a difference, is to have the Oracle in the area directly compared to what in the virtual machine?
  
  Hope to hear some tips.
  
  Thank you. :)
  
  Nith

  user645399 wrote:
  Hello world!

  In one of the server, Oracle is installed on a virtual machine.

  I have to make a change in the way I set up the file settings or something else to improve performance?

  What a difference, is to have the Oracle in the area directly compared to what in the virtual machine?

  There is no difference running Oracle in a virtualized environment or on a box. For the performance gain, the same number of steps are necessary as normally are required. Read the guide to performance optimization of Oracle doc site corresponding to your version of db http://tahiti.oracle.com.

  HTH
  Aman...

• Uninstall Windows and install in the Virtual Machine on the same computer

  I have an old Dell computer that ALLOWS you to have Windows XP Professional is installed. I have installed on it now Ubuntu (Linux) and Windows XP has disappeared. The computer came with Windows XP Professional installed when I got it. However, I still have the installation disc. My question is, would it not possible or legal to use the installation disc to install Windows XP Professional on a VM on the computer even though I still have the product key?

  Hello

  This is legal, Yes, the question is: 'is possible', and depends on every time that you have a Windows XP OEM key or not, if that is the case, then you can install it, but you can activate ever, the key can be used only once by the motherboard (VM motherboard change). If its if retail is key then its no problem at all.

  The sticker will tell you this. If it says or OEM and the OEM COA. otherwise its so retail in most cases.

  It may be useful

  Yuri

  Please mark the question as answer by clicking Mark as answer, if you do not know that my solution solves your problem, this helps others find this solution more quickly.

• How to get the MAC address of the virtual machine on which vmware tool is not installed

  Hello

  In our project, we communicate to vCenter/ESX and details of virtual machines using the VI - Java 4.0.0 SDK APIs

  I use PropertyCollector for details.

  But in the following cases

  1. a virtual machine is poweredOff.

  2 VMware tool is not installed on the virtual machine.

  I am not able to get the mac using the PropertyColector address.

  To get the macaddress property I use after crossing spec:

  rootFolder (folder)-> childEntity (data center)-> hostFolder (Folder)-> childEntity (ComputerResource)

  -> host (Hostsystem)-> vm-> guest (GuestInfo)-> net (GuestNicInfo)-> macaddress (in Virtualmachine)

  I know the vSphere client uses the VI SDK to perform all operations, and I am able to see the macAddress of VirtualMachine in cases using vSphere client.

  Is any body please help me get the macaddress of VM in the two cases.

  Thank you

  Deepak

  Take a look at the dashboard feature of the virtual machine and specifically "VirtualEthernetCard": http://www.vmware.com/support/developer/vc-sdk/visdk400pubs/ReferenceGuide/vim.vm.device.VirtualEthernetCard.html

  When you assign a new vNIC to each virtual machine, a unique MAC address generated is given by default. If you still want to map the actual interface of the guestOS, then you would take a look at guestInfo as you may have noticed IF you have the VMware Tools. Although the default is whence the MAC address

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• need to configure a connection wireless network with static IP address to make a panasonic wireless display of work on the virtual machine

  Hi, I'm new to macs and Fusion. I have a MacBook Pro 13 mid-2009, running 10.5.7 and Fusion 2.0.5, running Win XP Pro SP3 as the virtual machine (not in a bootcamp partition separate). I added a second network as a bridged network adapter (first one is set to NAT). I'm trying to connect my wireless panasonic (802 11b) to the virtual machine display, as I do on my old sony PC. Normally, I turn on the wireless on the PC, find the network wireless in Win XP and configure my SSID and necessary of static IP address and configure the NIC to search only ad-hoc connections (non-infrastructure). I also turn off the firewall so that it can work. There is a panasonic program runs on the PC (which I also installed on the virtual machine) makes it all happen once I have the connection. So the place that seems to be stuck, it's that I can't find a wireless to configure network adapter since--what the VM is a NA standard, so there is no place to specify the SSID, ad-hoc and disable the WEP key. Someone has ideas how to go beyond my current state?

  In addition, the panasonic only works at 800 x 600 for the display resolution, so it will automatically change the graphics settings. I guess that's not a problem on the VM, but thought I would ask in advance in case someone sees a problem with it.

  Thank you very much.

  Larry

  If the only way you can connect to the device is via WiFi, then you will need to provide your own WiFi USB network adapter to the virtual machine because Fusion presents only the network card Ethernet wired to the Virtual Machine, regardless of the host network adapter is the main map.

• Request is not the virtual machine RAM

  Trying to install Quickbooks 2010 on a computer that already have Quickbooks 2009 virtual.  The virtual machine has 2 processors (excluding 4 Physics) and RAM 4024 (about 8 GB), which is confirmed through system / properties.  VMWare Workstation 7.0.0 build-203739 using.  VM is Vista 64 SP2 (basic machine is Windows 7).

  QuickBooks setup.exe reports immediately, "your system has only 98 MB of memory.  QuickBooks.Requires at least 500 MB of memory. "This option is left...

  Yes, that's what I would try (copy the contents of the CD to a directory on a drive, then edit this file framework.xml).

• Windows XP Home Edition (Version 2002) include SP1 is the Virtual Machine for Java (MSJVM) installed on this and future Service Packs Microsoft remove it?

  While the installation of Microsoft DirectX 9.0 c on my Windows XP Home Edition (Version 2002) operating system (not sure if the 2002 version in it's original state included SP1), EULA (EULA) provided the contract included a paragraph stating that "ONLY in regards to THE VIRTUAL MACHINE MICROSOFT FOR JAVA, YOU ARE ONLY ALLOWED to INSTALL THIS OS COMPONENT ON A MACHINE THAT CONTAINS A ALREADY the VERSION OF THE MICROSOFT JAVA VIRTUAL MACHINE". Assuming that the MSJVM was included with Windows XP Home Edition (Version 2002), I advanced and accepted the EULA. I then downloaded and installed Windows XP SP2 and SP3, but wasn't sure whether SP2 and SP3 removed the MSJVM in any point. However, research on the question, I discovered the site "FAQ of Transition MSJVM" (updated May 7, 2004), who answered the question: ' if I install Windows XP SP1a or later, it will remove my current MSJVM? " with "No, the operating system upgrade will not remove a MSJVM existing on the computer" (http://www.microsoft.com/about/legal/en/us/interoperability/java/faq.aspx). However, I can't find any instance of it on my computer.

  So my questions are:

  1. Windows XP Home (Version 2002) Edition include SP1?
  2. The MSJVM is installed on this version?
  3. SP2 or SP3 removes the MSJVM in any point to?

  Hi Chris,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• How to install and configure the virtual machine with XP as an operating system on a Machine running Vista

  How to install and configure the virtual machine and XP operating system inside, with vista as my work machine.

  * original title - how to install and configure the computer virtual and XP operating system inside, with vista as my work machine.*

  How to install and configure the virtual machine and XP operating system inside, with vista as my work machine.

  Hey Preethi23

  It comes to the installation of vista operating system instance

  read the links below

  http://www.Microsoft.com/Windows/Virtual-PC/support/Virtual-PC-2007.aspx

  http://www.Microsoft.com/Windows/Virtual-PC/support/FAQ.aspx

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en

  Walter, the time zone traveller

• How to check when the software installed on the unix machine

  Team,

  I need to check when the s/w is installed on the unix machine, can someone tell me

  Thank you

  PMP

  Prakash_dba wrote:

  Team,

  I need to check when the s/w is installed on the unix machine, can someone tell me

  Thank you

  PMP

  Find /-name oracle - ls 2 >/dev/null

• Made for CS6 and creative cloud installed in the same machine cause registry problems.

  Made for CS6 and creative cloud installed in the same machine cause registry problems.

  Have installed both on a system must not cause registry issues.  There may be problems where CC resumes a CS6 facility as part of a subscription right.

  How we stop to resume my perpetual license CS6 creative cloud?

  https://forums.Adobe.com/thread/1584746

• SCSI driver is missing in the virtual machine. Driver is missing in the provided website. Instructions on how to install the driver (once you find) are missing.

  I get the text following error encrypted every time that I boot Windows XP in VMWare Fusion, since I've upgraded to version 4.02 a few months ago.  So I upgraded to version 5.02 hoping the error would go, but he didn't.

  When I try to start it, it says "he has at least a virtual SCSI device installed on this virtual Windows XP computer.

  Windows XP does not include the drivers for the card SCSI BusLogic VMware Fusion uses virtual SCSI devices.
  To use these virtual SCSI devices, install the VMware driver in the virtual machine. "Download the driver of"http://vmware.com/info?id=43"."
  Once I have to dismiss the message, everything seems to work properly.  How can I make this message disappear?

  I tried to go to the useless link that is provided (http://vmware.com/info?id=43), but it takes me just for a general download for all VMWare products page.  Then I tried searching for "SCSI" but it does not have the driver, I'm supposedly dedicated research

  After doing a bit of searching around, I finally found a driver called "vmscsi - 1.2.0.4.flp ', I connect to my virtual floppy drive.  Once I did, my virtual machine wouldn't boot (I get the error "NTDLR is missing.)  I then unplugged the virtual floppy drive, and now my virtual machine starts again.  I then re-connected the drive floppy and discovered the following content:
  Disk.Tag
  Txtsetup.OEM
  vmscsi.cat
  vmscsi.inf
  smscsi.sys
  OK... Now what?  No installer?  What the hell am I supposed to do with it?  I tried a double click on all of these files and have no significant results.  When the pilot is supposed to go?  No instructions? -What VMware calls "support"?

  The VMware Tools GUI has been removed because it has now integrated with the Virtual Machine settings, however you can still use the command line.

  C:\Program Files\VMware\VMware Tools>vmwaretoolboxcmd help
  Usage: vmwaretoolboxcmd  [options] [subcommand]
  Type 'vmwaretoolboxcmd help ' for help on a specific command.
  Type 'vmwaretoolboxcmd -v' to see the VMware Tools version.
  Use '-q' option to suppress stdout output.
  Most commands take a subcommand.
  Available commands:
     device
     disk
     script
     stat
     timesync
     upgrade (not available on all operating systems)
  

• How to install the virtual machine tools

  I am new to this, and it's fun to find how to do everything. I'm stuck now, so need some help, I did search but could not find definitive answers.

  I have ESXi installation, it will run on a dedicated slide. I have a windows-based virtual machine that I use to test.

  I downloaded the iso of VM Tools for Linux to install on the server so that I can push to the client virtual machines. I can't understand how to install the VM on the server tools so that I have the option in the console to push to turn the VM to the client tools.

  Is there something I'm completely missing? The iso is for linux, which is the server. I assumed it would be installed on the server that would allow me to push to windows clients.

  Help, please!

  VMware tools for Windows is already included in the installation of ESX.

  Customer Infrastructure using, go to the console of the virtual Windows computer and logon. Right-click of the virtual machine in the inventory on the left, then select "install/upgrade VMware tools. If Autorun is enabled the installation starts automatically, if not the Windows.iso is loaded into the virtual computer CD-ROM drive and you have to run setup.exe.

  André

• Is it possible to use the box that esxi is installed as a virtual machine?

  I have correctly installed ESXi and established virtual machines using the VI Client. The virtual machines are installed with the operating system and on balance, everything works as advertised.

  PC, access the box of ESXi are far enough away from the real server. Is it possible to have a vm residing with the box of ESXi machine on ESXi box?

  Any help will be greatly appreciated. This is new territory for me.

  Ken

  Hey Ken. Good job getting everything setup and operation. Unfortunately you cannot 'see' a guest of the ESXi server. I suggest you bring a laptop with you on the server.

  If you have found the following information useful please consider giving points and or the marker said.

  See you soon

  Kevin