need to configure a connection wireless network with static IP address to make a panasonic wireless display of work on the virtual machine

Similar Questions

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• How to change the network when the virtual machine is connected, in Vmware ESXi with Perl in Linux?

  Hello

  If someone can answer that the way to change the network of a VM with Perl? I would periodically change the network where the virtual machine network adapter is connected.

  Thank you

  Take a look at the vGhetto repository of scripts, where you can find a lot of useful scripts, including updateVMPortgroup.pl , which may contain what you are looking for.

  André

• HA restarts the virtual machine if the storage connectivity is lost? If how is HA needs to be configured?

  We plan to go forward with a single dual-port HBA in each of our ESX servers. My concern is that the HBA becomes a single point of failure. HA supports restarting the virtual machine which lose connectivity to back-end storage. We did some testing and it does not appear that HA does not handle this. Even when 'enable us VM monitoring' the machine virtual do not restart on other ESX servers in the cluster that they hang just basically. I've read a few articles which seem to indicate that it should work, but I'm not able to get there. Any thoughts there?

  HA checks the availability of default ESX host. There is an option to monitor the heartbeats reviews, as well. Maybe this will do, but sometimes a guest still works for awhile even if the disk is lost. And as for a long time VMware tools send heartbeats...

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• No network connection between the virtual machines on different hosts ESXi

  I have several 5.0 ESXi hosts in a cluster managed by vCenter Server 5 and I have network problems:

  1. [Host A] running a virtual machine can ping any other computer virtual running on the [host A] great!
  2. A virtual machine running on host [B] can ping any other virtual machine running on [B] home - very well!
  3. [host A] (from the ESXi console) can ping any virtual machine running on [B] home - even better!
  4. [B] home (from the ESXi console) can ping any virtual machine running [host A] - beautiful set!
  5. A virtual machine running [host A] can not ping any virtual computer running on host [B] and vice versa - bad, very bad!

  So basically the problem is that the virtual machines can communicate on hosts. It is a major problem that I need to fix, for obvious reasons.

  Networking on all hosts is configured exactly the same way: a unique and standard vSwitch with a pair of gigabit network cards grouped, vmkernels configured for the vMotion, NFS and network management and a group of ports configured for the VIRTUAL local area network used by the VMs. (vMotion works fine on hosts, storage vMotion works very well too.) All virtual machines are servers Windows (2003 and 2008).

  Reason #3 and #4 above, my assumption is that #5 must be the result of an ESXi/vCenter configuration issue and not a problem with the switches of material upstream. Is this a reasonable assumption?

  Whatever it is, can anyone offer suggestions on how can I fix? It is quite annoying as I'm pretty sure that these hosts are configured in the same manner as those of our production cluster, which does not at all these problems!

  Thanks in advance for any help you guys can provide.

  To be honest, it looks like a problem with your physical network-

  How is the physical network configured - are NIC connects it to the same physical switches? Are the virtual machines on the same subnet? If this is not the case, they are able to ping the gateway sbnet? Can you piing host IP address from the virtual machines?

  I also moved it to a forum more approiate.

• regarding the connection of the virtual machine to the external network

  Hi all

  I'm new to vmware and I have two virtual machines with windows operating system 7. How to connect to the external network?
  can I assign a NATed IP to them?

  If the need to talk about virtual computer internally, you can add all the VM in the same VSS(vswitch 1) at the same port group Network2 VLAN40. for virtual machines on that VLAN can communicate among themselves without problem and configure all virtual machines with IPs in VLAN40. no need for an another vs.

  For internet access, first check with your network administrator, if the VLAN has a routing or this VLAN has access to the DNS server that provide internet or the proxy server for internet access. He will confirm. or you can also check if this virtual machine are able to ping your DNS server or proxy servers. If its power of ping so it has access to this network. Configure the virtual machines that you configure a physical computer for internet access.

  If the VLAN has access to the internet, even that you configure the physical server with connection DNS and proxy for internet access only the configuraiton even here too in the virtual machine.

• Change the amount of vCPU in vCD deletes the virtual machine network connection in vCenter

  
  It is a problem of crazy that we discovered, and I wanted to know if anyone had seen him.

  First of all, we miss the following software versions:

  vCD: 5.1.1.867405

  vCenter: 5.0.0 Build 913577

  ESXi: 5.0.0 build 1024429

  If you go to vCloud Director and change the material properties of an existing virtual machine (Powered off) any change in the amount of vCPU (to something new), inside of vCenter status of the network will change to the port group Standard (inactive) none.

  
  Even if, before making the change, the virtual machine is connected to a distributed port group, and works well.

  We now display an SR to VMware, but sometimes it is worth running this by the community to see if other people have already seen or indeed want to test on their deployment.

  
  Thanks in advance

  We have solved the problem now.

  The reason why that we faced this problem is because we used the wrong order in the API.

  You must ensure that you use the undeploy command when you work with the vCD API otherwise you end up with a disconnected network card.

• Network says it has detected another computer on the network with my IP address.

  Original title: ip addy

  My internet access icon said that it has detected another computer on the network with my ip address, is there something that I have to take

  Try restarting your router.  It should solve the problem.

• How to install and configure the virtual machine with XP as an operating system on a Machine running Vista

  How to install and configure the virtual machine and XP operating system inside, with vista as my work machine.

  * original title - how to install and configure the computer virtual and XP operating system inside, with vista as my work machine.*

  How to install and configure the virtual machine and XP operating system inside, with vista as my work machine.

  Hey Preethi23

  It comes to the installation of vista operating system instance

  read the links below

  http://www.Microsoft.com/Windows/Virtual-PC/support/Virtual-PC-2007.aspx

  http://www.Microsoft.com/Windows/Virtual-PC/support/FAQ.aspx

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en

  Walter, the time zone traveller

• How to make a virtual computer to connect to a CD player with an ISO mounted when you start the virtual machine?

  I am the creation of virtual machines using PowerCLI 5.5 on vSphere 5.0; and while the virtual machine is turned off, I am able to mount an ISO on a CD player and change the boot order to boot from the CD-ROM (for another post).  I have the flag startConnected set to true, but am not having much luck getting the virtual machine to connect to the CDDrive

  $cdObj = $Vm | New-CDDrive - IsoPath $isoPathName - StartConnected: $true

  If ($cdObj - no $null)
  {
  #Power off VM if it is on
  $VmState = $Vm.PowerState
  
  If ($VmState - eq "Receptor")
  {
  $Vm | Stop-Vm-confirm: $false - ea 0
  }

  $BootHardDiskName = 'disk 1 '.
  $VmView = get - VM $VmName - Server $serverObj.Name | Get-View
  $HardDiskDeviceKey = ($VmView.Config.Hardware.Device |) Where-Object {$_.} DeviceInfo.Label - eq $BootHardDiskName}). Key

  $BootableHardDisk = new-Object - TypeName VMware.Vim.VirtualMachineBootOptionsBootableDiskDevice - property @{'DeviceKey' = $HardDiskDeviceKey}
  $BootableCDRom = new-Object-Type VMware.Vim.VirtualMachineBootOptionsBootableCdromDevice
  
  #Set for CDRom boot order
  $BootIso = new-Object VMware.Vim .VirtualMachineConfigSpec - property @ {}
  "BootOptions' = New-Object VMware.Vim.VirtualMachineBootOptions - property @ {}
  BootOrder = $BootableCDRom
  }
  }
  
  #Set VM from the start settings at the start of the first CD and forces the display to update (sometimes delayed)
  $VmView.ReconfigVM_Task ($BootIso) | out-null
  $VmView.UpdateViewData ("Config.BootOptions.BootOrder")
  
  #Power on VM
  $Vm | Start-VM-confirm: $false - ea - global 0EV: vmOpsError | out-null

  When I start the VM, it does start the ISO.

  If I go to vCenter, the CD is pointing to the ISO file, but the 'Connected' to change settings option is not checked;  I can restart the VM of vCenter and then the VM restarts the ISO, but not in the script.

  I even put code to add a lead time of 5 to 10 seconds; I restart the virtual machine twice in the script and I can't CD to connect to start the virtual computer.

  Appreciate any suggestions.

  Maureen

  Have you tried to do a

  Game-CDDrive - CD $cdObj - connected - confirm: $false

  immediately after the start-VM?

• Students cannot "connect/disconnect the virtual machine's CD/DVD devices.

  I will start with this context (and apologies for the wall o ' text): I'm a newbie.  I took the course VMware local community college offers [VMware ESXI Server Enterprise (CIS197)], but I've not yet certified. And I don't have a real experience, except what I have taught myself so far.

  I recently accepted a position of learning associated with the College (think: glorified lab tech). I was tasked to work with stuff from VMware in the laboratory (among other things such as Cisco and Juniper equipment). There is no pass-down information like the previous left the position four months ago.

  We have a single host running ESXi 348481 4.1.0. "We have vCenter Server (5.5.0, 1312298), running on Windows Server (2008 R2, Enterprise Edition).  Access host and vCenter through two different IP, addresses using the vSphere client (either 5.5 or 4.1, using a single application - depends to know if I connect to the host or vCenter).

  At that time, the host is using local storage only (we have plans to change this, but it will take time).  The host is not a production on its own server, because it does not have a school systems.  He does, however, run a number of virtual machines in the lab, students use (Linux, Microsoft, Web design, etc.).  So, right now, I can't take it down.

  I was tasked to create a number of virtual machines that students can use to make the basic labs of Microsoft Windows 7.  So far, I have:
  -Created users, one per student, on the host.
  -Creating VMs, deploy one per student, I have a gold model vcenter.
  -Creation of roles to limit the access of students to just their VM attributed, which they access via client vSphere.
  -Created a Windows Server 2008 R2 domain controller that is also a DHCP server.
  -Created a virtual network, which is accessible only by the Windows 7 virtual machines and is not visible outside the vSphere environment (if I said this right - he does not see the Internet or school network).

  So far, it's all good.

  However, I need to be able to allow students the ability to edit the ISO file on which their VM points in order to complete some laboratories. I guess they would use the button "connect/disconnect the virtual machine's CD/DVD devices" on the taskbar (or console window). It does not work.
  I searched a lot and found that others have had the same problem.  However, all of the solutions I've tried so far have failed.  When they click 'Connect to ISO image on the data... store. "they get an error message means nothing to me,"an internal error has occurred in the vSphere Client. Details: Object Reference not set to an instance of an object. Contact VMware support if necessary.
  The role that I use for students has these settings:
  -Data store > Browse the data store
  -Virtual Machine > Configuration > change the settings of the device
  -Virtual Machine > Configuration > settings
  -A bouquet under the virtual machine > Configuration >
  -Configure CD media
  -Console interaction
  -Connection of the device
  -On
  -Power off
  -(and more, which I don't believe are important to the question)
  -State > create the snapshot
  -State > go back to the snapshot

  I tried "Virtual Machine > Configuration > add existing disk", "Virtual Machine > Configuration > add new disk" and "Virtual Machine > Configuration > add or remove an instrument" with no luck.

  Either by the way, the root account can do all these things, but no other account can - not even a game as an administrator account.

  I've seen mention I have apply the role in the data store.  It is perhaps part of the problem. I can't see the data store when I am connected to the host (wellll, I can, if I click on the host name, then on the Summary tab - but roles do not apply at this stage).  I see is 'Inventory' (which has virtual machines and Pools of resources), 'Rôles' and 'log files '.

  I can see the data store when logged in vCenter. Roles of students, however, are defined on the host computer. If I clone the role of users in vCenter and change this role cloned to have "permissions" that those who are on the host computer and then apply it to the data store, it still does not work.

  So, after all this (which I hope I've included all the necessary information), what can I do to allow the students to change ISO to which they are connected?

  Of course, if I left something, or if someone has a question, please ask.  I want to get this resolved as soon as I can.

  It turns out that I finally found the solution to the problem.

  What 'fixed', it is sufficient to vSphere Web Client to vCenter, which then allowed us to use Single Sign-On (SSO).  This, in turn, allowed us to define users and roles in vCenter (rather than having set them up directly on the host computer) which have then been applied to the VMS of students and also to the data store.

  Now, they can (de-) connect their ISOs at will.

  I find it interesting that vSphere Client (application) shows the users (and the things that they have access to), but it won't let you set of users.

• VMware networking help - network bridge / to access the virtual machines form other pc

  I have a computer 'server' that had 4 VM launched on it.

  I need to connect to these virtual machines, all of which have their own IP addresses. I can ping the server or the host of a remote computer, but must be able to communicate with the virtual machines in the remote/client computerss.

  Can anyone offer insight?  I tried to set up an automatic bypass at one of the virtual machines

  Any thoughts?

  Sorry, I'm not sure I can follow you. In any case, what you're trying to do is to configure adaper network of the virtual machine as "Bridged" within the parameters of the virtual machine and then change network card settings in as guest OS:

  IP address: 192.168.1.21 (where 21 must be an unused IP address currently)
  Subnet mask: 255.255.255.0
  Def gateway: 192.168.1.1

  Preferred DNS server: 192.168.1.1

  André

• How to access the virtual machines to different physical network?

  Hello

  I'm new to ESXi, can someone tell me how can I access virtual machines on the physical network existing in case I use different IP classes? Physics of the network by using the class C IPs and I assigned IPs to virtual machines of class A? If it is possible, then, what are the steps?

  In fact, I installed exchange 2010 VMs and also want to access the email accounts of physical network.

  Thank you.

  vmjunki wrote:

  You mean there's no way in ESXi to configure the way so we can access the virtual machines to physical network? without third-party applications.

  Because it is impossible for the various networks IP connect without a router, you must have such a device. There is really no difference in that in a pure virtual or physical environment.

  You might think the ESXi host as a box with one or more servers (virtual) inside and one or more layer (virtual) two switches, just like a small server room. This means you will need to provide the same type of connectivity that you would have to a new server room with machines configured with addresses in a different IP network range.

• I have a problem with the password on the virtual machine.

  Original title: passwords & Windows 7 virtual machines

  Hello

  I am running windows 7 pro 32 bit, with a windows XP virtual to develop existing software.

  The hosts & VM connect to a file on the network server. The file server is running windows XP, the network is a simple working group. I've manually created a limited user on the file server with the same name and password as my logon to windows 7.

  Today, I changed my password to connect to windows 7, which I am not as often as the security people recommend that I do. I changed the password on the file server to synchronize and also the password on the virtual computer.

  The virtual machine is maintaining however, somewhere the old password, which crashes, and I get the logon screen. If I enter the new password it connects then. I went into the settings of the VPC and delete the credentials saved, without effect. I removed "enable on startup" of integration features, also without effect.

  So I get the password in the VPC, but then I have to enter the password to access the network share. Or I can enter the password each time I start the virtual machine. The second is less painful, but still annoying.

  Any thoughts?

  Hello

  Thanks for posting in the Microsoft Community.

  According to the description, it looks like you are facing a problem with windows Virtual PC.

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Unable to add the virtual machine network services

  Hello:

  I already read that warning Virtual PC 2007 is not compatible with win 7-64.
  However, I read that it is "unofficially" possible launch.
  OK, I installed it and it worked except networking.
  Basically, I need to install the Virtual Machine Network Services.
  I right click on my network card-> properties-> install-> services-> virtual machine network services (VPC2007 folder: where I can see VMNetSrv.inf)
  Then says Windows: it is impossible to add the requested feature. The specified service has been marked for deletion.

  The problem is that I get this error even on WinXP SP3, so I think that there is something else wrong.

  And of course, Virtual PC 2007 available networks are only: no connection, Local, NAT.  (Missing my physical adapter)

  Thank you!!!

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Hope this information is useful.