USB 3.0 only works as 2.0 (z580)

Similar Questions

• HP Pavilion dv7-6c02sm USB 3.0 only works with the 2.0 speed;

  Hello

  My HP Pavilion dv7-6c02sm has 2 USB USB 3.0 ports on the left site of my laptop. Currently, I installed these "sp55102" driver - Renesas Electronics USB 3.0 host controller driver

  When I connect my WD 1 TB USB3.0 ports chip I just get the message that he could run faster if I connect through a Super speed USB3.0.

  I tried all ports and all give me the same answer. I googled for a manual and myself made sure that my USB 3.0 are on the left side. And ports give me the same notification so I think it will be a driver problem. Could not find a better then sp55102.

  When I copy files, the left USB ports work at a lower rate than normal USB 2.0 on the right side.

  On the side USB 2.0 right arround 25 Mb/s and the left a USB 3.0 starts at 25 and plunges in 13-15 Mb/s

  I formatted my drive and installed new firmware for my external hard drive, but it does not solve my problem so I'm pretty sure it's a driver issue, but I can't find a more suitable, more recent and better driver.

  Product: A9X57EA #BED

  Help, please. Thank you

  Hello

  Ok... I've solved the mystery

  After hours hours of research online I thought that it is mostly a problem of windows 7 because windows updates are not installed to the end. In the end only USB worked with 3.0 but there was an optional windows update install and atfer install the optional update (which is dealing with something) the two USB 3.0 working at a speed of 120 MB/s

  Also, you should check your chipset on the following link

  http://www.Intel.com/p/en_US/support/idyp

  If you use the latest version on the drivers to install Renesas Electronics USB 3.0 host controller driver. I found this to be the last version USB3.0_allOS_2.1.28.1_PV

  
  So if anyone has the same problems with his speed USB3.0 and make the message "this device can perform faster if you connect it to a Super speed usb 3.0" is really the solution. You need to update your system with windows update and by that I mean, you want to be rushed to insatll everything to the system and upgrade your windows to the possible limit maximum!

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Device only works on a particular USB port

  Hello!

  I have a model of adapter Belkin F5D 7050 and I used it without a problem since August 2009. He was attached to the USB port on the side of my Dell monitor. I have recently moved house, to get the best signal, I plugged it into the USB port on the front of my office and it was working fine.
  Overnight, it doesn't work at all and after several installs and uninstalls drivers supplied with the device, I managed to get it working again, but it only works on the port from the top on the side of my monitor. USB ports work well and work with my iPhone, digital camera and everything I have except the adapter.

  Now could someone please be kind enough to tell me how will operate on the USB port that I really need?

  I tried to contact Belkin support, but they are without hope.

  I appreciate the time you took to read and help!

  S Dell Inspiron 530 - Windows Vista Home Edition 32-bit

  =)

  Already replied to your other post http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/130dd3c6-222a-4bde-b70e-716cc8c260dd.

  Please posts questions one only once in these forums - forums aren't like dhat rooms.  It may take minutes, hours or even more than a day to get an answer.  Be patient.

  Thank you!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• first instance LR 6 cc import goes well with the various cards, that one card does not work, usb HDD with only images, map 9571 photos 115GB, sometimes only 300 photos, then wait all night nothing, try the separate subfolders, only two (including su subfo

  trial LR 6 cc import goes well with different cards, that one card does not work, usb HDD with only images, map 9571 115GB, sometimes only 300 photos pics, then wait all night nothing, try separate subfolders, only two subfoldrs(including subfolder) done well, 175, and 125 peaks, other subfolders doesnot work, opendLR as administrator : no difference. I7 import about 60-70%. on the import of only about 300 visible pictures, the other empty square. solution?

  Hi willemm,

  first instance LR 6 cc import goes well with different cards, that one card does not work.

  Could you please develop the issue you are facing?

  What is the image format you import?

  USB HARD drive with only images, card 9571 115GB, sometimes only 300 photos pics

  I would not recommend to import gb 115 library at once.

  Kind regards

  Assani

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• USB 2.0 should work on the Satellite 2410-303?

  Recently, I have re-installed XP on my Satellite and think I have all the latest drivers installed now - including drivers from the chipset of this site.

  When I plug a USB device, I get a message saying that this device can run faster, so her acting as a USB 1.1 port.

  Anyone know how I can get USB 2.0 to work? Or maybe he is not supported by this old Satellite?

  Hello

  I checked the specs on the Toshiba site and searched a little bit using Google and it seems that this laptop isn't equipped with USB 2.0. This means that you can only use the USB 1.1 on this laptop speed.

  I hope I could help you.

• Why my USB keyboard did stop working?

  Can some tell me why my USB keyboard stopped working after I upgraded my mac OS X EL Capitan 10.11.4?

  Seems that Apple had broken the old apple keyboard wired usb on OS X 10.11.4. New Apple wireless keyboard worked fine.

  Was not working at boot time and didn't work with windows bootcamp and did not work when started from the recovery partition, so it must be a problem with boot loader.

  Reseting EPRAM and SMC has failed.

  Time Machine restore to old 10.11.3, 10.11 install USB appears to only way to solve the problem.

  With old 10.11 usb install, because the keyboard did not work at boot time and restoring from Time Machine backup starting 10.11.4 recovery partition broke my fusion disk partition tables. I had to manually destroy disc fusion and remove partitions on the hard drive and ssd of command-line diskutil and create new logical volume of fusion in the car and after that he restore backup from Time Machine.

  Very well of the keyboard now work but lost 1 day and Windows 10/bootcamp partition in the process.

  I have iMac 27 "5 k end of 2015, but I like to use wired keyboard numpad because.

• External USB mouse does not work in the context of Satellite L

  Hello, my name is John Cooley, and I have a problem that your FAQ do not have a category.

  Because I've had this laptop as a gift in October 2011, I was using a mouse that was provided by the company, by that I was hired and in no time I had no problem with the mouse.
  I'm no longer with this company and have not been for the past ten weeks, but it's not my problem.

  My problem is that for some reason any after working properly for about two minutes, I get an error message indicating that the USB hubs on the right side of my laptop will not recognize the mouse which is very annoying, because I am also using a dongle for access to the internet using these same hubs (which by the way (, never having this problem) because it works in all USB hubs without problem, what I can do.

  My question is not why this is happening but what should I do so that I can use the mouse.

  Please don't suggest I have stop using the mouse and rely solely on the touchpad.
  Unfortunately for me I find using the key exercise lose more time because I don't have three hands and that's what you have to do everything done a mouse.

  With respect,

  John Cooley

  Hello John

  On this virtual path, it is not easy to say what the problem is here. Before you begin to discuss your problem, please, let us know what model phone you have and what operating system is preinstalled.

  Have USB ports for laptop on the left side?
  Have you tested?

  I also want to know is: do you have this problem USB I have general or simply using this external mouse? I mean, have you tested with some USB memory stick or GSM connection by USB cable, not only the dongle to access internet?

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• HP Pro 3400 MT (usb ports do not work in windows 8.1 on Intel chipset)

  Are prorts USB on my computer do not work!
  I have Intel (E) 6 series C200 chipset. I'm updating all the drivers and after 5 to 15 minutes when the computer starts, usb ports have stopped working.
  My computer model: HP Pro 3400 MT
  OS: Windows 8.1
  Please, help me! How can I solve this problem?

  Yep! But... If this is not a new installation work? Hmm...

  Without doubt, I find a reason. It's for my X-710-BK (a4tech) mouse drivers. I switch to a different mouse and system now works fine!

  PS > not update drivers just because you can. Updated only if you wish.  -I agree!

• my front USB drives hsve stop working. How can I restore them?

  My front USB disks have stop working.  How can I restore them?

  Hello

  Please use the following thread only:

  http://h30434.www3.HP.com/T5/forums/replypage/Board-ID/DesktopQA/message-ID/31803

  Thank you.

• HP Envy m6 1125dx: USB Ports are not working please help

  Hey all,.

  I had problems with my USB ports on my laptop Hp Envy M6 1125 DX. Only 1 usb port works and the rest do not work. I tried everything to update the BIOS updated the drivers from the site. I don't know if the driver is not installed or if it's just a bad USB port, but I didn't really notice it until recently, when I bought a headset and I couldn't use it as my only working port is used by my mouse.

  In the USB tab in Device Manager, it has the following features;

  Generic USB hub

  Generic USB hub

  Family of chipsets Intel (r) 7 series/C216 USB Enhanced Host Controller - 1E2D

  Family of chipsets Intel (r) 7 series/C216 USB Enhanced Host Controller - 1E26

  Composite USB device

  Composite USB device

  USB root hub

  USB root hub

  None of them have a yellow exclamation point so my best guess would be that is missing the drivers for the rest of the ports, but I have no idea. I'm in for this reason excrutiating pain, I'd appreciate any help.

  Thanks in advance!

  Hello @jgasca23,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the issue of the USB port and wanted to help!

  First of all, try to review the following document and let me know how it goes:

  HP PC - troubleshooting connections USB (Windows, 10, 8)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Sony A55 vs Device Stage via USB, not enough of work

  Sony A55 digital camera (or more correctly the SLT-A55V United States w / GPS) has two modes of operation for its USB connection: PTP and mass storage.  This question is about its use in mode PTP with Device Stage.  Compatibility Center lists the A55, sustained.

  (Device Stage does NOT recognize the device when the mass storage mode value.)  On the other hand, Sony software only works with the USB to the camera in mass storage mode.  This question is NOT on the use of the camera with Sony software.  In fact, the real point of the question is: how best to use this device with Win7 * without * Sony bundled software.)

  Two problems noticed so far, when you use the mode USB PTP of A55 w / Device Stage:

  (1) the "erase after importing" does not work, images remain on the camera independently checked/unchecked (minor annoyance)

  (2) all of the videos on the camera (uses his MP4 format) are not transferred (important deal breaker)

  Device Stage has no such problems with several other cameras that we have (mainly Point & Shoot varieties, for the most part, the Canon), where it clears after import and transfers all media so always correctly or video.   The problematic behavior seems to be unique to the A55.

  The A55 is the latest version of the firmware (2.0), and behavior of Device Stage is unchanged if Sony beam is installed (i.e. the bundle Sony doesn't seem to install anything that creates OR that corrects the problem)

  For example, q: is there something that can be fact/configured for Device Stage (or the A55 himself?) to solve these problems?

  TIA

  Hi davbol.

  You will need to contact Sony support for firmware\driver was last updated for the necessary changes.

  http://www.Sony.net/SonyInfo/support/