USB - Use Toshiba 2 GB Transfalsh as boot media

Similar Questions

• Can I use Toshiba Store E TV for backup?

  I would like to know if I can use 'Toshiba Store E TV' device to back up my files on the computer, such as the use of an external USB drive?

  Hello

  Of course, you can take the TV Store.E to back up the files. The HARD drive has a USB interface which means you can connect your laptop or a computer via a USB cable and save the files on it. :)

  If you have any other questions, please let us know!

• Play stereo music from active A2DP BT phone on the computer using Toshiba BT Stack speakers

  1. is it possible to listen to stereo music from active A2DP Bluetooth phone on using Toshiba Bluetooth Stack for Windows computer speakers?
  2. is it possible to use loudspeakers and a microphone as a hands-free Bluetooth phone device?

  Thank you, Lenkost.

  Your question 1,... should be possible if BT stack supports a stereo audio gateway. Ever experience this, so I can't give you a concrete answer on this... try it ;)

  For your question 2,... Yes, it is indeed possible. Phone calls on your laptop via BT works very well.

  You can even do more advanced things as "read incoming SMS messages on your computer without even touching the phone" (they pop up as a message of "MSN"), or proximity to unlock your 'screensaver' as soon as you (your mobile phone) closer to the laptop...

  I used the software available for free 'Of FloAT Mobile Agent' on a SE phone. (I think they currently support only this brand... not sure though). The link to this program free open source is here: http://fma.sourceforge.net/

  A list of compatible phones (submitted by users) can be found here:
  http://sourceforge.net/tracker/?atid=533372&group_id=71167&func=browse

  PS I know that those who have bought a SE phone just because they wanted to make use of this program...

  Kind regards
  chain

  [Edited by: admin]

• Error message when you try to use Toshiba Disc Creator

  I recently upgraded to Vista SP1 SP2 and now I get an error message when I try to use Toshiba Disc Creator 2.0.1.3. "An unexpected error has occurred. Error code 32007C-26-00000001 "it worked perfectly before.

  This is the first time that I used it since the update so I think that SP2 may be part of the problem, but I'm not sure. I could not find updates for TDC. My system is a Satellite L305-S5919 with Vista 32 bit.
  Someone has an idea of what could be the cause of this error?
  Thank you

  Have you tried to roll back the OS in time and checking the previous features once again, just to be sure, it has something to do with the installation of SP2?

  I put t know if anyone here can offer a solution but I m quite pessimistic in this topic and don t think that Toshiba provide new version.
  AFAIK Toshiba disc creator is always available with single and also downloadable image recovery application.

• Qosmio X 300 - this system cannot use Toshiba Accessibility

  I managed to install all Qosmio X 300 drivers on Windows 7 64 bit. Everything works fine except this one: 'Toshiba Accessibility. When I click on a button of 'Access', I get this error message:

  "This system cannot use Toshiba Accessibility"

  I get this and what is this feature?

  Hello

  I agree with the user above. I think you didn't install Toshiba Value Package added but it is necessary to other tools to operate. You can download it on the Toshiba site so take a look at it again.

  Check this box!

• I just imported videos by usb using windows, but now I can't find it on my computer

  original title: import videos

  I just imported videos by usb using windows, but now I can't find it on my computer

  Could they be in your Documents folder or in your folder my videos?

  If you know the format of the video files... MOV, .mpg, .avi for example...
  Do a search for this position, and perhaps you will find the files.

  (308895) how to search for files and folders in Windows XP
  http://support.Microsoft.com/kb/308895

• HOW CAN I GET A HP LASERJET 4V IN ORDER TO PROPERLY USE THE OPERATING SYSTEM TO XP PRO AND USB USING A PARALLEL CABLE?

  HOW CAN I GET A HP LASERJET 4V IN ORDER TO PROPERLY USE THE OPERATING SYSTEM TO XP PRO AND USB USING A PARALLEL CABLE?

  The printer works at all with this cable?

  The cable has recognized and installed by Windows XP when you logged on to the computer?

  If the cable has been recognized, what steps have you taken to install the printer then (be as accurate and complete as possible)?

  You get an error message?  If so, please provide, without paraphrasing.

  This printer has already been installed on this computer?  If so, with what type of connection?

  And especially, what is the brand and model of the USB to parallel cable?  Many of them do not work.  See, for example, the comments here , which suggests that 25% of the units will simply not work.  This seems to be one of these products you should buy at a local store, rather than on the Internet, then you can continue taking it back until you get a working unit.

• When I opened my cell phone message shows that Windows detected a hard disk problem I use toshiba laptop windows 7

  When I opened my cell phone message shows that Windows detected a hard disk problem I use Toshiba laptop windows 7

  Hi Vimalpal,

  To provide the proper resolution, I would need more information on your side.

  1. What is the number of the model of the laptop?

  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest to run the troubleshooter and check if that helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  I suggest you run the disk check and check if it helps.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• I get an error. "reboot and select proper boot device or insert boot media in selected boot device and press a key" while using the hard drive.

  Replace drive hard hgst with seagate and when I replaced the hard drive from hgst orignial he says "reboot and select proper boot device or insert boot media in selected boot device and press a key" and when I tried to install OS it does not display the hard drives to install operating system.please help

  Hello

  Check your cable connections. If necessary check with the manufacturer of the motherboard System Support
  and Seagate Support.

  Make sure that settings/settings (BIOS/CMOS) often F2 that you start the computer is configured to start at
  on the CD/DVD first in the boot order.

  Seagate - Support
  http://www.Seagate.com/support/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• "Reboot and select proper boot device or insert boot media" tried, still does not.

  I went into the BIOS and changed the order of Boot Drive so that the hard drive comes first as a boot priority, and nothing happened. I always get the reboot and select proper boot device error. My power supply broken so I took an old and put this one rather than broken, but I might miss some cable? I don't know because I'm not good with computers. So if you can help me please, I would be grateful. Thank you.

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing. I would like to ask you:

  • What is the brand and model of your computer?

  To diagnose this problem more, I recommend you to check and make all the cables are properly connected to the devices in the computer. For help with the same, you can either check the manual of the material that you may have received with your computer or you can contact a hardware technician to do the same.

  Once we are sure that the connection is good, we can diagnose more if the problem is with the software/operating system or if it is a hardware failure.

  If you have a Windows DVD or USB created. You can try to boot from the installation media and run a system restore or repair in recovery options. To do this, follow the steps below:

  1. Boot from the installation media.

  2. When you see the Install Windows page, press or click repair your computer to start Windows recovery environment.

  3. In the choose an option screen, Windows recovery environment, press or click on troubleshooting.

  4. Click on Advanced options etselectionnezStartup Repair.

  If the auto repair fails, try the system restore. It will take your system at the time, and when it was working fine. Follow the steps below:

  1. Boot from the installation media.

  2. When you see the Install Windows page, press or click repair your computer to start Windows recovery environment.

  3. In the choose an option screen, Windows recovery environment, press or click on troubleshooting.

  4. Click on Advanced options etselectionnezSystem Restore.

  5. Select the restore point where everything worked well and follow the on-screen instructions

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Hope this information was useful. Let us know the results once you have tried these methods.

  Thank you

• Cannot start the computer, the error message "Reboot and Select proper Boot device or Insert Boot Media in selected boot device and press a key any."

  Original title: can't access my BIOS, but blocked on select boot device

  I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.

  Hi Ryan,

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?

  Method 1:

  You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.

  http://forums.Toshiba.com/T5/Windows-7-knowledge-base/how-to-enter-the-system-BIOS-on-Windows-7-computers/Ta-p/275629

  Method 2:

  If the problem persists, I suggest you to return the item and check if it helps.

  What can I do if my laptop Windows 7 or Windows Vista does not start?
  http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717

  If the problem persists, I suggest you to contact the Toshiba Support for assistance.

  http://support.Toshiba.com/support/home

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Reboot and select proper boot device or insert boot media in selected boot device and press a key

  I have an Asus UX31 of Zenbook ultrabook. It is running Windows 8, I installed it via download, is not a physical disk.

  Recently, I ran Windows Update and he knew as usual, until the time of reset. It restarts, showed on the screen "install updates", but then finally started only the following error message:

  "Reboot and select proper boot device or insert boot media in selected boot device and press a key.

  As mentioned, I don't have a disc, my ultrabook is not a hard drive. Internal storage only that there is a 128 GB SSD. I went into the bios and check the boot settings and the SSD is correctly listed as the only option to start.

  I can only assume some question that's happened with the update of windows. I'm not sure of how to proceed now? ATM, I only have a weight £1000 :/

  Hello r,.

  Thanks for posting your query in Microsoft Community.

  By the description of the problem, I understand that you have problems starting from the computer to the desktop screen, it gives the above error message.

  I imagine how it could be frustrating when things do not work as expected. I appreciate your efforts to solve this problem.

  As this problem occurred after installing Windows Update, this could be the reason for the incompatible driver installed with the Windows updates.

  As you have already checked the settings for starting a disc SSD set correctly, I suggest you disconnect all the external device and restart the computer, check if are able to boot to the desktop screen.

  We will try the following methods and check if it helps.

  Method 1: I suggest you create USB recovery media as your laptop doesn't have the DVD Rom.

  If you're having problems with your PC, a recovery USB disk can help you troubleshoot and fix these problems, even if your PC does not start.

  Create an installation media for Windows 8.1
  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Method 2: Once you create USB recovery media, auto repair:

  Follow the steps below to perform an automatic repair:

  1 restart the computer, wait for the logo of the manufacturer to check the option of start menu, it will usually F12.
  2. the start menu key can be different with each manufacturer. If you are unable to find the start menu button, you can consult the user manual.
  3. restart the computer, when appears the logo of the manufacturer, continue to press the Boot option menu key to enter the boot menu and change the option to boot in DVD ROM.
  4. Once you start your computer by using Windows 8 DVD or system repair disc, a black screen appears with the gray text "press any key to boot from CD or DVD". Press a button on any.
  5. Select the exact time and the type of keyboard.
  6. click on repair your computer in the lower left corner.
  7. click on troubleshooting, advanced option and then click on auto repair.

  Hope this helps, please reply with the status of the question to get help.

• Manual or how to use the ExpressCard Remote control Mobile HP Media Center

  My HP Pavilion dv7-1448dx-product # NV213UA #ABA.
  I'm running Win 7 Ultimate x 64 OEM.

  I searched HP and found 1 photo of my card ExpressCard Mobile HP Media Center remote control, I found all the descriptions of component and everything BUT how to use it?

  Where can I get information on how to use the "card ExpressCard Remote control Mobile HP Media Center"?

  Deborah M souls.

  Deborah M souls

  Hello

  Are you talking about the next device? How to install and how to use information is here:

  Express Card Media Center

  Kind regards.

• HP Pavilion A6722SC: reboot and select proper boot device or insert boot media in selected boot device and press a key

  My computer has just stopped working and when I turned it on, it says I should change my hard drive. I did, but now the message is whenever I turn on my computer: reboot and select proper boot device or insert boot media in selected boot device and press a key.

  I have Hp Pavilion A6722SC. I have my 1st drive on the driver that I bought and I have the Boot Device Priority :

  1st boot Device [hard disk group]

  2 St boot Device [CD-ROM Group]

  3rd boot device [network startup group]

  4 rd boot Device [group Floppy]

  -> Disk Boot Priority group [not installed]

  -> Group of CD-ROM boot Priority [DSK02...]

  -> Group of HDD to boot Priority [DSK00...]

  -> Group network boot priority [not installed]

  I saw that many said I should disable the floppy, or I should have hard on the boot device 1 or driver, but this doesn't work for me. Someone who have solved problems of this kind? I need help!

  Thanks in advance.

  Sorry for the bad spelling.

  I needed a new OS... I had Windows Vista and I can't install it more, so I have to buy a new OS.

• ASUS computer Unable to boot error "Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key." "

  Original title: ASUS computer problem

  This morning I slammed my hard cutting computer. This afternoon, when I went to get on a black screen appears and says "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key." When I go to press the same message poping maintains and does not allow me to go anywhere else. My computer also makes a click when I try to restart. Any suggestion would be appreciated. Thank you.

  Adam

  The 'Ticking' noise is indicative of an HD program.  You can made a brick out of it.  The Message on the selection of the appropriate boot device indicates the tilt of the computer 'See' the HD.

  You see the HD in the BIOS when you start?