Automatic Windows logon

Similar Questions

• Initialization of a wireless automatically before windows logon?

  I'm trying to deploy software updates on a network by using active directory.  The update is supposed to install before windows logon.  It works correctly on a computer that is connected through the LAN, but the update does not install when the ethernet cable is disconnected.  I guess that's because it cannot access the network share and that is it connected to the network wireless before opening of session that it would install.

  Question:

  Is it possible to automatically initiate a connection before login?

  Any help would be appreciated :)

  -Brandon

  Hello

  Unlike hardware wire wireless current connection depends on much more than the operating system currently running.

  As far as I KNOW, there is daily work on this issue, because we are talking about and fortunately this will be better in the future with new Chipsets andRradios.

  In any case try to post here also.

  HE the Pro Forums on TechNet.  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Is there a way I can welcome screen, windows logon password?

  Is there a way I can welcome screen, windows logon password? I just want my computer to boot and in windows without the logon screen?

  Thanks for your help, I would be without a computer if I don't hadn't found you.

  Extract from http://support.microsoft.com/kb/315231...

  You can also turn on automatic logon without editing the registry in Windows XP Home Edition and Windows XP Professional on a computer that is not joined to a domain. To do this, follow these steps:

  1. Click Startand then click run.
  2. In the Open box, type control userpasswords2, and then click OK.

     Note When users try to view help in the window information user accounts on Windows XP Home Edition, the help information is not displayed. Additionally, users receive the following error message:

     Cannot find the: \Windows\System32\users.hlp Help file. Check that the file exists on your hard drive. If it does not exist, you must reinstall it.
  3. Clear the "users must enter a user name and password to use this computer" option, and then click apply.
  4. In the automatically on log window, type the password in the password box, and then retype the password in the Confirm password box.
  5. Click OK to close the window automatically on Journal , and then click OK to close the user accounts window.

  Tricky

• Stop: c000021a {fatal error} the windows logon system process ended unexpectedly with the status of 0xc0000034 (0x00000000) (0x00000000) need help please system does not start

  Hi my HP Compact computer running with windows Xp professional recently had security tool, antimelware doctor and I kind of have got rid of him, he also put some viruses on the winlog thing and I could not get rid of it with antivirus software that I don't know the name of, Malwarebytes' Anti-Malware and AVG 2011 I did a scan antivirus in safe mode with AVG(in command prompt mode) and he put a bunch of virus the virus volt, I'm out there and there was a running called 2008 command prompt and I clicked on output and it says that this program is not complete (or something similar) save all unfinished work before going out and me did not run this command prompt , so I left Malwarebytes' Anti-Malware and avg, then I restart my computer and we get the blue screen of death say stop: c000021a {fatal error} unexpectedly finished process windows logon process system with the status of 0xc0000034 (0x00000000) (0x00000000) system will reboot, and whenever it restarts, it says the same thing, I can't use safe mode cause it resets and starts normally any help pls I have files I need this computer?

  You can create a bootable XP Recovery CD of Console and replace the file, but it may be easier for you to make boot CD of a Hren.

  When you start the Hiren's CD, choose the XP Mode of Mini and it has an interface in XP style Explorer where you can find and replace the winlogon.exe suspicious or missing file.

  There should be a copy of winlogon.exe here:

  c:\Windows\System32\dllcache

  Rename your current c:\windows\system32\winlogon.exe file (if it exists) and copy / paste the replacement of c:\windows\system32\dllcache.  If you do not see here, search your HARD drive and find one.  Another possibility (depending on your environment) is c:\windows\ServicePackFiles\i386, or c:\i386 d:\i386...

  You just need to replace the file winlogon.exe somehow.

  When you are finished replacing, restart as usual (remove the CD bootable of course).

  With the help of Hiren, you can also copy offshore on an external device (USB key or HARD drive), all personal security files.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• "automatic windows UpdateA" conntect to the Internet Explorer update?

  If I select the button "update automatic windows", will be causing the latest version of Internet Explorerto automatically updated? Because I don't want to not only (software conflict with IE 9 and Zoom Text)

  IE9 is not supported on Windows XP...

  http://Windows.Microsoft.com/en-GB/Internet-Explorer/products/IE-9/system-requirements

  .. .sequently Windows updates would not offer an upgrade to IE9.

  Tricky

• Can you assign the time of windows logon minutes rather than hours?

  Can you assign the time of windows logon minutes rather than hours?

  If you are referring to the TIME parameter net user, which is limited to increments of one hour.

  If you want to control (and the ability to force logoff as well), you will need to use a third party software.  Access Boss a 15 minute granularity.  I'm sure like many other applications, probably some of free.

  If you only want to restrict Internet access (rather than access to the computer itself), your router may be able to restrict access with granularity to minutes.  "Parental control" software, such as NetNanny, also restrict Internet access, although that usually not at the minute.

• Can not turn on my computer... "the windows logon system process unexpectedly... system shutdown.

  When I turn on my computer, a blue screen appears and it says: 'the windows logon system process done unexpectedly...... closed system '. "what this means?

  I forgot to answer one question:

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  The most likely problem is that this file is missing:

  c:\windows\system32\winlogon.exe

  It might have been put in quarantine (actually deleted) by your antimalware/antivirus program, if you need to replace it.  There are other copies of the file on your system, which you can use to replace the missing file.

  You have to boot your system on something to do that, so if you have no real XP bootable installation CD, make a CD bootable XP (no XP media required) Recovery Console.

  Sometimes there is a problem to get into XP with XP Home Recovery Console, but work on this first, then we will see the replacement of the file:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  When own running chkdsk/r, we can replace the file.

• Error - c000021a {fatal system error} the Windows logon system process ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000), not able to start the computer.

  Original title: computer will not open a session.

  c000021a {fatal system error} the windows logon process prosses systewm ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000).

  Hi macduf123,

  You did it all change hardware or software on your machine before this problem?

  The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe.

  You can follow this link and check if you are able to start correctly on the desktop.

  How to solve an error "STOP 0xC000021A.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down

  c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down

  Pls teach the procedure for resolution of the problems of this error message.

  Hi mac62sg,

  Remember to make changes to the computer before this problem?

  You can follow the steps mentioned in the article below

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

  Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get a black screen BIOS afer and before Windows logon

  So get a black screen after BIOS and before the Windows logon screen. I checked the RAM and one on two RAM sticks that was bad. But I still have the black screen. I tried an external monitor but still a black screen. I tried all the normal things (verification of the restore point disc, e.g. via the command prompt, startup repair, etc.) and no luck. I ran a test to check the hard drive, and it is impossible to find the hard drive. But then I ran AVG anti-virus, the AVG Live (bootable CD) and at the very start gave me this error: 106 error to the power of disk on life: 8768 (365 days + 8 hours) and underneath were basically the same error, just different numbers. But it still allowed me to run a scan and he was going through the files ok so she did not see the hard drive and files (contrary to the test of hard drive and yes the hard drive test was a bootable cd of same manf. like the hard drive), he found no virus. Even when I ran Defender in offline mode. Then I tried to re - install the operating system on the same drive with a cd. When he was going through the first part of the establishment where it was drivers and so forth: I kept getting the BSOD. Then I took the drive from the laptop and install it in another laptop but she has done the same thing, black screen, so I thought it was the hard drive. But then I begin another hard drive from the laptop and put it in the laptop original and he gave me the black screen and I know that the hard drive was good, she was an operating system that starts when I put it in the not troubled laptop. So any ideas anyone? Would it be possible that the all three things at once: RAM and hard drive laptop motherboard? Any help would be appreciated. Yet once, bios starts, just to Gets a black screen and does nothing after the bios but before the windows logon. The operating system is Vista and it is a Dell laptop, Studio. Any ideas?

  Thank you

  Don

  Hello

  Thanks for posting your question in the community of Microsoft Windows. I understand that you do not get black screen.
  I imagine the inconvenience that you are experiencing. I will definitely help you with this.
   
  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:
   
  . Did you of recent changes made to your computer?
   
  Please follow the methods and mark the question below:
   
  Method 1:
   
  Follow the steps in the link below.
   
  What to do if Windows does not start correctly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
   
  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
  Warning: Before installation, you must be prepared for the worst scenarios that led to your existing data on your computer being removed. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other storage devices before performing a clean install.
  
  Method 2:
   
  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly:
  http://support.Microsoft.com/kb/958233
   
  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
   
  Warning: Before installation, you must be prepared for the worst scenarios that led to your existing data on your computer being removed. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other storage devices before performing a clean install.
   
   
  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• I can not open hotmail attachments (updated Automatic Windows Vista, IE8, activated and updated running).

  I have a new HP computer and I can not open hotmail attachments (updated Automatic Windows Vista, IE8, activated and updated running).  When you try to open an attachment, the bar downstairs quickly moves to the right, but never appears a dialog box asking if you want to open or save the file.  Error message I get when I try to resolve it with the suggested steps indicates "module"wintrust.dll"was loaded but the call to DllRegisterServer failed with error code 0x80070005.  I tried to do the same command prompt, but still not received the same error.  Thanks for help anything.

  Hi Paul,.

  Have you tried to download an attachment after you turn off your antivirus?
  I had a problem in the past where the system was performed at Trend Micro Internet Security and Web content filtering (I think that's what it was called) was preventing attachments from download.
  I would like to know what are your results!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  http://pcsupport.about.com/od/windowsvista/HT/nvistapassword.htm

  Info on the link above will help you.

  http://au.Dummies.com/how-to/content/set-up-passwords-in-Windows-Vista.html

  More info on including a password reset disc info.

  See you soon. Mick Murphy - Microsoft partner

• Windows logon screen

  How to change the WINDOWS logon SCREEN background image. I know its possible, tell me how

  Hello

  How to change the Vista logon screen
  http://www.Vistax64.com/tutorials/79886-logon-screen-change.html

  Customize your Windows Vista logon screen
  http://www.howtogeek.com/HOWTO/Windows-Vista/customize-your-Windows-Vista-logon-screen/

  Customize the image shown on the Welcome screen
  To change the image displayed on the screen to logon for a user:
  http://smallvoid.com/article/Vista-Welcome-screen.html

  Change the Windows Vista logon screen to meet your needs
  http://blogs.TechRepublic.com.com/window-on-Windows/?p=1040

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows logon: LogonUI.exe - corrupted file

  After the round of my boyfriend used CCleaner on my windows 7, whenever I'm starting, I get a box labelled windows logon: file logonui.exe - corrupted with the message the file or directory \Program files is damaged and unreadable. Please run the Chkdsk utility. A screen similar to the cmd prompt flashes whenever I try to access the chkdsk utility, so I'm not able to use it. I tried sfc scannow but I get a message indicating that Windows Resource Protection could not perform the requested operation. I did a clean boot and that did not help. System Restore no longer works. Also whenever I try to access the internet explore or trendmicro antivirus, I get a message saying the element 'iexplore.exe' or 'uiwinmgr.exe' that this shortcut refers to has been changed or moved, so this shortcut no longer works correctly. You really want to remove this shortcut? I don't know if these problems are interconnected and the result of something has been deleted by the ccleaner. I've read other questions similar to mine, but none have the solution I need. Anyone know how to solve these problems?

  Hi Malomi,

  Welcome to the Microsoft community.

  This problem occurs because of the corruption of the registry. I suggest you to do the Startup Repair and see if the problem is resolved.

  Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair is a recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc.

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer by using the power button on the computer.

  2. do one of the following:

  o If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you must try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  o If your computer has multiple operating systems, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

  3. in the Advanced Boot Options screen, use the arrow keys to select repair your computer and press ENTER. (If your computer is not listed as an option, then your computer doesn't understand no repair preinstalled recovery options, or your network administrator has disabled the.)

  4. Select a keyboard layout, and then click Next.

  5. in the System Recovery Options menu, click a tool to open it.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Hope this information helps. We know the results. We will be happy to help you further.

• No response from the keyboard and mouse to the Windows logon.

  Hello, I had this problem a while but a restore fixed it, and of course it happened recently that I want to challenge results.
  Basically, my mouse and my keyboard do not respond before Windows logon.
  Opening height of session does not either.
  The keyboard and mouse seem to work if I go into the conservation program (ESC key at startup and F11).

  I'm running Windows 7 on an HPG60 laptop 64-bit with 3 GB of RAM.
  Processor: Intel (r) Celeron (r) CPU
  900 to 2.20 GHz 2.19 Ghz

  My mouse is actually a touchpad - Synaptics PS/2 Port TouchPad.
  My keyboard is attached to laptop Standard 101/102 - key or Microsoft Natural Keyboard PS/2 with HP QLB.
      
  I need help as SOON as possible so that I can get back to work.

  -Albert

  This is equivalent to the old rule of iron of computing: If you have important files on your PC, then you need to back up an external medium regularly. Problem request not do or wait until you have a major problem. Fortunately, Windows 7 gives you a loop hole. Here's how it works:
  1. get a disk external 2.5 "in a USB case.
  2. connect it to the PC.
  3. set your BIOS so that it uses the DVD drive as its primary boot device.
  4. start the computer with the Windows 7 repair CD or with your Windows 7 installation DVD.
  5. press a button if you are prompted to start from the DVD.
  6. When prompted, select "Safe Mode Command Prompt".
  7. connect as administrator if you are prompted.
  8. Select repair when prompted.
  9. Select command prompt.
  10. save your files or folders on the external USB drive (or a flash drive).
  If you are not familiar with the commands of copy in the command line environment, ask a friend gifted in computer science to help you.

  After solving the problem of keyboard and mouse, do you a favor and use the USB disk as backup media. On a regular basis.