USB with a Code 10 error

Similar Questions

• I have a problem with the code c0000135 error does anyone have a solution to this

  I have a problem with som kind of virus code c0000135 error anyone has a solution to this

  Hello, masts,

  What were you doing when the error occurred?

  What makes you think that there is a problem with a virus?

  View all content of the message, please.

  During this time:

  Restart your computer and start typing the F8 key

  Select Mode safe mode with networking

  Download the following tool and run a scan complete to rule out malware

  http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx

  While still in safe mode, use this scanner (precaution) free online

  http://housecall.trendmicro.com/

  Restart Windows

  Start > type CMD

  Press ENTER if you are using Windows XP

  If you use Windows Vista or Windows 7, right click on CMD and select run as administrator

  Type the following: sfc/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  Asked may to your Windows installation media if corrupt files are found.  The System File Checker will repair the files if possible.  If it can't, you will have to reinstall Windows

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833/PL

  You can also see this re: same error

  Windows 7 service pack 1 update failed error C0000135-missing sqmapi.dll

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/Windows-7-Service-Pack-1-update-failed-error-code/a9e7c803-6443-E011-90B6-1cc1de79d2e2

• I get a blue screen with a code 1000008e error.

  Signature of the problem:

  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  More information about the problem:
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 82C3B72D
  BCP3: CED616B0
  BCP4: 00000000
  OS version: 6_1_7601 Service Pack: 1_0 product: 768_1
   
  Screens with these codes of original blue title: can someone help after the reboot.

  These accidents were caused by the corruption of memory (probably a driver).
  Run these two tests to check your memory and find which driver is causing the problem.

  * Don't forget to download any other DMP files (especially those running auditor)

  * If you are overclocking reset all default before running these tests.
  In other words STOP!  If you don't know what it means that you probably are not

  
  1 - Memtest.
  
  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org

  * Boot from the CD and let it run at least 5 or 6 passes.

  * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.

  * Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.

  If a well-known stick fails in a slot of motherboard, it's probably the slot.

  2. Driver Verifier
  
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  * But sometimes it will crash and will not tell you the driver.

  * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.

  * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.

  * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

  * Under Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.

  So, here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select all of the items EXCEPT FOR 'Low Resource Simulation' and click 'Next '.
  -Select "Select driver names from a list", then click "next".
  * Select all drivers that are NOT supplied by Microsoft and click on "Next".
  -On the next page, select "Finish".

  * Restart the system and wait as he crashed to blue screen.

  * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.

  * If you are unable to Windows because it crashes too early, try safe mode.
  * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  * Further reading
  'http://support.microsoft.com/kb/244617 '.

  Using Driver Verifier to identify issues with Windows drivers for users advanced

• Satellite A80 - in ODD device with the code 39 error Manager

  Hello

  I have a Satellite A80 127. I have a problem with my CD player.

  When I tried to upgrade my XP Home Edition of XP Pro SP2, display said the restart that he couldn't play in my CD player. During the inspection, I found that my CD/DVD drive is unable to read CDs if it can read the DVD. From what I remember, it was working fine a few days before.

  I tried to locate the source of the problem and with the option of troubleshooting, I found that I have a yellow exclamation mark against my SCSI/RAID host controller in my device (with error code 39) Manager. I could not update the driver it give me an error message. In addition, there was a controller SCSI/RAID of Nero. I tried to remove to check if the main works, but always without success.

  Any suggestion would be great, and in the meantime I'll try to find similar topics.

  Thank you
  knockaert

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=111441 please

  Good bye

• Unrecognized USB device, device code Malfunctioned error (43)

  I bought a new computer with Windows 7. Initially my IPOD worked well with this computer. He still sees the IPOD but nothing else. In addition, it does work on my old computer.

  1. I completely uninstalled and reinstalled ITUNES.

  2. I reset the device lose all my music.

  3. I went to the Device Manager and the IPOD appears as UNKNOWN DEVICE. I STOPPED the device DRIVER and restarted.

  4. I tried to have attached to my old computer update, and I get the exact same error USB not recognized message.

  5. other devices work fine on the USB hub, in addition, I tried the other USB hub.

  All measures above have failed. It all started when I had problems with updating my music to the IPOD, and I chose the RESTORE function on the SUMMARY page of the ITUNES software with the device attached and recognized. Since nothing? Initially, when the device has been fixed after that RESTORE option was chosen, I needed to attach to high speed USB 2.0 Hub, error message? It is a high-speed USB 2.0 device. I have reviewed the other questions in this forum, the Forum of apples, all with the same results... Nothing.

  Help!

  Hi HTipper,

  Bearing in mind all the iTunes and drivers are up to date it's a little strange to get this message.
  I would also recommend to check the cable that you use to connect your IPod to the computer.

  In this scenario, I suggest also download the latest version of the software for the IPod on the site below:
  http://www.Apple.com/iTunes/download/?iPod

  You can also have a look at this tutorial below:
  http://www.Apple.com/support/iLife/tutorials/iTunes/IT4-1.html

  Here is the link to the Apple Ipod support:
  http://www.Apple.com/support/iPod/

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get an error "the server does not support an SSL connection" with a code of error 0x800CCC7D in Outlook express.

  I followed Bruce Hagen and still cannot send to the OE section. Reception is no problem. When I try to send I got the following error msg: "the server does not support an SSL connection. "Account: 'pop.att.yahoo.com', server: 'smtp.att.yahoo.com', Protocol: SMTP, server response: ' 250 8BITMIME ', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D. I tried to change the port for outgoing to 456. When I do so I get this error msg: failed to connect to the server. Account: 'pop.att.yahoo.com', server: 'smtp.att.yahoo.com', Protocol: SMTP, Port: 456, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E.  Is there a cure for this. He just started two days or at least that's when I noticed I cud not send. If you can help me I will appreciate it more. Thank you.

  JP banks

  Original title: cannot send using OE 6. Reception Ok.

  Hi JPBANKS,

   

  Thanks for keeping us posted and share this information with us.

  Glad to know that the problem is solved. Do not hesitate to contact Microsoft Windows Forums for issues related to Windows in the future.

• HP Pavilion model 15-af131dx: Enter password administration or power on password with this Code 52199612 error

  I Home School my children and I currently have 1Laptop to use and need one that extinguished my child 4 years and now its asking me for the administration or the power on password?

  This has CREATED a huge problem my computer asks me a power on password/Admin password. I remember this password or where I would have written it down. Y at - it another way to access my system without taking in and it cost me a ton of money for someone to do something as simple as to enter a key to past simple or something? Please someone anyone help me if you can... Thank you very much

  THIS IS THE CODE IT IS GIVE me after 3 attempts failed

  52199612 *.

  Oh my god!!!
  You are my life of Eve thank you very much
  (I'm sure you know already worked)
  Thank you
  G_B_Y_

• Installation of Acrobat DC with this code failure: ERROR: DW003, DW071

  Tried to reinstall. Did not work.

  I fixed it, I went to the site to download and install, I put through the creative cloud. Thank you much.

  Oliver

• Download "Bluetooth device driver not installed." with my mobile phone in Lenovo laptop. I could also see a yellow mark on this device in the Device Manager and a code 28 error

  I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows

  When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.

  I have laptop Lenovo, which has something like that for bluetooth

  Broadcom Bluetooth 4.0 USB

  Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi

  In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).

  But windows cannot fix it.  I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well.  I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.

  Please help me. Please give me link if there is no download needed

  Original title: bluetooth

  Hi Roger,

  You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.

  Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.

  Please come back if you face problems related to Windows and we will be happy to help you.

• Series USB drivers does not start error: "this device cannot start. (Code 10) »

  Hello

  I have a usb_dev_serial.inf of TI and a catalogue of security usb_dev_serial_amd64 and a folder containing the amd64
  the DLLs below.  When I used the Add Hardware Wizard to load the .inf, properties of the pilot were "this device cannot start. (Code 10)"
  Does anyone have a suggestion?
  Thank you
  Larry

  Hi Larry,

  Thanks for posting in the Microsoft Community Forum. According the description, I understand that the USB device does not work, rest assured that we will do our best to help you with this problem.

  Answering the question that helps us provide the best solution:

  1. it worked before?
  2 have had any changes made to the computer before the question?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  Try the following and see if it helps.

  Method 1:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:

  http://support.Microsoft.com/kb/943104

  Method 2:

  Install the latest driver for USB and check if that helps.

  To do;

  a. click Start, type devmgmt.msc in the start search menu.

  b. right-click on the USB device and click on Update driver software.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Try connecting to another USB port and check if it helps.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• Cannot connect the Olympus camera to transfer pictures to the computer with 10 and 31 error codes

  Original title: Codes error Windows 7 31 and 10

  Trying to get my photos on my camera (Olympus) on the computer using the USB cable.  Error report getting is the USB mass storage device driver has a problem.  Device cannot start (10) Port_ #0007.Hub_ #0001 C:\Windows\system\Drivers\vwifimp.sys also microsoft virtual wifi miniport adapter code 31 error.

  Have tried to uninstall the device in Device Manager and the system hangs when the computer is restarted.

  Disabled people of Microsoft virtual wifi miniport adapter.

  Have you tried to update drivers using windows update and it said that all updates are up-to-date.

  Have tried troubleshooting and not fixed.

  Have you tried Mr fix it and not fixed.

  Hello

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. What is the camera Olympus model number?

  3. other USB devices work properly with the computer?

  4 that Mr. Fix it you try?

  I suggest you to connect the Olympus camera to another USB port and check with the question.

  Also try to connect to another computer and see if that fixes the problem.

  According to the error codes, you must Access the site of Olympus and install the drivers updated to the Windows 7 operating system.

  Follow the links below:

  Method 1:

  I suggest you to run the tool and troubleshooting hardware devices and check with the question:

  Open the hardware and devices Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2:

   

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Method 3:

   

  Also, download and install the latest Chipset drivers from the website of Olympus, since they also include drivers for USB.

   

   

  Update the drivers from the Olympus website by typing the model number:

  http://www.olympusamerica.com/cpg_section/cpg_downloads.asp

   

  For reference:

   

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:

  http://support.Microsoft.com/kb/943104

   

  For more information:

   

  Contact Olympus Support:

  http://www.olympusamerica.com/cpg_section/cpg_consumercontact.asp

   

  I hope this helps.

• Problem refreshing - state that there was a lack of file i.e. windows/system32/winload.efi with a 0xc 0000001 error code.

  Original title; Refresh problem

  Tried to update and went through the procedure advised. However, the message come indicating the problem with the computer. He went on to clarify that there is a missing file, i.e. windows/system32/winload.efi with a 0xc 0000001 error code. He said I would need to have access to the USB or disc, but I have no then recommends talking manufacturer. However, are there any other ideas to rectify this.

  Hello

  We need more information to help you, please answer the following question.

  What is the brand and model of the computer?

  Error code: 0 xC0000001 indicates that there could be some problems with the boot device or startup files are corrupt. Most of the new machines come with a recovery partition, allowing you to return your purchase, you will need to check your user guides (or the manufacturer's Web Site) for instructions. Choose this path requires you to save all the data first. The OEM must be able to provide a recovery CD to you at time of purchase.

  If you do not have a disk to install/repair of Windows 8/8.1, then I suggest you first create a Windows 8/8.1 installation media. Check out these links:

  Create a recovery USB disk.

  http://Windows.Microsoft.com/en-CA/Windows-8/create-USB-recovery-drive

  How to create the installation media for a PC refresh or reset:

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  The Windows upgrade with only a product key.

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  Run the update using the repair disc.

  How to refresh, reset or restore your PC.

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Note: Apps that you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  You can also view the following link.

  Windows 8.1 gel and Refresh Failed - error 0 xC0000001 is.

  http://social.technet.Microsoft.com/forums/Windows/en-us/c39cf1e1-fed8-49BD-bc6c-8690836f371f/Windows-81-freezing-and-refresh-failed-winloadefi-error-0xc0000001?Forum=w8itprogeneral

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

  Hello

  Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
  OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

  Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

  grateful for the help!

  Hello

  > message: unable to load powrprof, object: CLSD-no-it is found;
  In my view, this would mean that there is a problem with Toshiba Power Saver
  What laptop Toshiba, you have exactly?

  Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

• Help!  Get pop-ups with CODE of ERROR: sec_error_X1X510_A

  I have an iMAC end of 2012, 3.4 GHz Intel Core i7, 16 GB 1600 MHz DDR3. NVIDIA GeForce GTX 680MX 2048 MB, El Capitan iOS

  When you use Safari, Google home page, I type a domain and it goes to what I believe is a pop-up fake Apple Support with CODE of ERROR: sec_error_X1X510_A.

  Need help solving this. THX

  You have probably installed some adware. Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Satellite A100: Parallel Port to USB with Vista printing error

  I have a new laptop Toshiba A100 with Windows Vista installed. I can't make my printer A3 HP works via USB with a USB/parallel cable.

  Vista recognizes the connection and says driver installed. Try to print, and it just says: "error" Vista will not let me load the driver supplied with the connecting cable. Anyone got a solution for this?

  Hello

  Are you sure that the driver that came with the connection cable was designed for Windows Vista?
  I assume that the driver is compatible with early versions of Windows like XP.