Cannot connect the Olympus camera to transfer pictures to the computer with 10 and 31 error codes

Similar Questions

• Cannot start the computer with DISPLAY of ERROR: 0 x 00000024 (0 x 00190203, 0x837C33E80, C0000102,

  last time I connect, the NTFS has been runs a check and then close my computer with a SCREEN of ERROR and the COMMAND SCREEN CHECK BONES. All the time when I used the F8 key, it has not started safe mode and all. When I used F10 and F12... He made a QUICK and FULL TEST and said my hard drive 'PASS'... but no way to start the computer. The DISPLAY of ERROR says:

  --------

  Disable or uninstall an anti-virus, backup utility disk defragmentation. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  Stop: 0 x 00000024 (0 x 00190203, 0x837C33E80, C0000102, 0 x)

  ------

  Help, please! as I have not set up disk or CHKDSK with me. granted access via another computer. My question is: can I download a service pack 3 or installation to start XP Professional, on a USB to do - turn off the anti-virus, backup utility, disk defragmentation?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Source: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system/windows-xp-startup-error-stop-0x00000024/a15138c6-4be1-483d-b6db-e9d8db853d5b

• Connect the TV (with sound) and monitor for Optiplex 390

  Here is my system info:

  OptiPlex 390 small footprint

  Windows 7 64 bit

  Intel Chipset H61

  Intel HD 2000 (with HDMI and VGA) graphics card

  Map of AMD Radeon 6350 512 MB video (with 2 DVI splitter)

  I need to connect 1) HD TV with the sound via HDMI and 2) monitor via VGA to this system (no sound).  I did a lot of research on the Internet but can't find a definitive answer if my system will support both views.  Can anyone confirm if one of the three options below does not work, or any other ideas?

  Option 1: remove AMD card, connect the HDMI TV, connect the VGA monitor.  I've seen conflicting information if the HDMI and VGA ports can be connected at the same time.

  Option 2: Connect TV: dispatcher--> DVI HDMI adapter DVI-->--> TV, monitor connect a HDMI cable: dispatcher DVI DVI VGA adapter--> monitor-->.  It should work, but if someone can confirm if the AMD Radeon 6350 supports audio through DVI to TV?

  3rd possibility: buy another video with HDMI and VGA card.  I'd rather not spend more money... I have six systems to connect!

  Thank you in advance for your help!

  Hi Ozone72,

  Intel HD Graphics 2000 which was shipped with OptiPlex 390 supports two independent screens. Which means that you can connect TV for VGA and HDMI monitor, so that AMD card must be removed from the computer.

  Please try it and return back if it worked.

• Cannot get my player or the Flash Player install and/or error code 2503

  I can't get adobe reader or Flash Player update or install.   When I run maainrenance check I get the error code 2503

  Hi Dachbo,

  1. are you able to install any other programs?
  2 have you made any changes to the computer before the show?
  3. what operating system is installed on the computer?

  I suggest you try to install adobe flash player with full administrator permissions.

  How to apply once with a full administrator access token?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

  Installation problems | Flash Player | Windows
  http://kb2.Adobe.com/CPS/191/tn_19166.html
  http://kb2.Adobe.com/CPS/142/tn_14224.html

  Additional information:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/software-updates-produce-error-codes-2503-and-2502/d484e59e-FA92-4590-8958-4d9e4307f3cf

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• I am trying to install CC, and I can't. I have the message with... (Error code: 205)

  It is the following message:

  "We encountered the following problems:

  There seems to be a problem with the files downloaded. For

  troubleshooting tips, please visit our customer support page.

  (Error code: 205)

  I am owner of Mac pro with Mac OS X 10.9.3 2014

  I solved it to connect to the Internet via my VPN, there was talk of network...

• Cannot perform updates of Windows with 641 and 80070641 error codes

  Original title: update problems

  Get 641 and 80070641 errors every time I try to download updates.  How to solve this problem?

  Hi Bob,

  Please follow the links:

  Method 1:

  I suggest to ignore the title and follow the steps as indicated in the article.

  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2:

  Scan your computer by using the Microsoft Safety Scanner by clicking Download now, because this might have caused by viruses:

  http://www.microsoftsafetyscanner.com/

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• Problem with the installation of the zune to the computer software, shows a 0xc8000222 error code

  When I tried to install the zune software in my computer that is to show that "windows 7 portable update not installed" and showing an error 0xc8000222 code so what should I do to get the zune software installed in my computer

  Hello

  Sorry for the late reply.

  Try the suggestions of "HaydenThaGr8", this link

  http://answers.Microsoft.com/en-us/musicandvideo/Forum/xboxmusic-zune_software/when-installing-zunesetuppkgexe-i-get-the-error/f194a8b4-0a02-46c3-A995-175afb0c6e80

  You can also try the suggestions of the "Smittychat. "

  http://answers.Microsoft.com/en-us/musicandvideo/Forum/xboxmusic-zune_software/error-code-0xc8000222/4e84973a-27cc-4cdc-8655-81f2b433cb09

  And the response of the 'Sharief K' of the link.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/getting-an-error-0xc8000222-while-trying-to/12232938-B0A4-4E2C-A006-15f6dd8e7e83

  Answer if you need help with window and we will be happy to help.

• Cannot install the update of Windows Vista KB948465 - error code 80070490

  I try to install the Windows Vista KB948465 update (Windows Vista Service Pack 2), but he continues to display code error 80070490.

  According to the history of my update, update KB948465 is not install altogether 29 times since I first tried on September 11, 2009 to date, November 14, 2009.

  Help!

  Hey,.

  Follow the steps described in the article in the link below. This should solve. Scroll down, the end to see the steps for Vista.

  http://support.Microsoft.com/kb/958044/en-us

  $C God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

• Windows cannot load the driver with 10 and 31 of the code error code

  Original title: code 10 and code 31

  the audio does not work and says that it can't load the driver. the audio has stopped working after I installed a disc on the printer.

  Go to the Web site of the manufacturer of your computer laptop/computer/Sound card > drivers and downloads Section > key in your model number > look for the latest Audio from Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I transfer pictures from my computer to the iphone 5 using icloud

  How can I transfer pictures from my computer to the iphone 5 using icloud

  Normally, you do not use iCloud for this, you use iTunes, as shown below, but you can use iCloud photo library if that's your preference.

  Keep your photos safely stored and updated on all your devices - Apple Support

• Cannot connect the macbook pro in normal mode

  Cannot connect the macbook pro in normal mode

  Are you getting errors?

  How do you connect? You use Safe Mode?

  What year/model MacBook Pro you are using and what version os OS X are you running?

• Can not find the driver for my Canon Rebel XT/350 d camera to send pictures on my computer

  Can not find the driver for my Canon Rebel XT/350 d camera to send pictures on my computer

  And it is a Windows problem why?

  http://www.USA.Canon.com/Cusa/support/consumer/eos_slr_camera_systems/eos_digital_slr_cameras/digital_rebel_xt#DriversAndSoftware

  P.S., A lot of people just leave the CF card and use a card reader:

  http://www.Amazon.com/s/ref=nb_sb_noss?URL=search-alias%3Daps&field-keywords=CF+card+reader&x=0&y=0

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene&N=40000069%20600021611%20600031471&IsNodeId=1&name=external

• Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

  Thanx

  Hi rui2010,

   

  Place your machine in a clean boot State to see if another application is in conflict with the modem.

  If this fails, I recommend you reach out to the community Hauwei for assistance:

  http://Forum.Huawei.com/jive4/Forum.jspa?forumid=46&orderStr=9

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Impossible to connect the computer to the internet after getting a virus

  Firewall settings

  I can't connect the computer to the internet after getting the following error message after I have used AVG 2011 to isolate and virus and rebooted my computer.
  Windows cannot connect to the internet using HTTP, HTTPS or FTP.  This is probably caused by the settings of firewall on this computer.
  Check the settings of firewall for the HTTP port (80) and HTTPS port (443) FTP port (21).

  I can't connect the computer to the internet after getting the following error message after I have used AVG 2011 to isolate and virus and rebooted my computer.
  Windows cannot connect to the internet using HTTP, HTTPS or FTP.  This is probably caused by the settings of firewall on this computer.
  Check the settings of firewall for the HTTP port (80) and HTTPS port (443) FTP port (21).

  Which firewall do you use? First, click on start > run > type inetcpl.cpl > Ok. Now, click on the "Advanced" tab On the Advanced tab, you should see a button to "restore the settings advanced". Click on the button. Follow the prompts all to confirm your selection. Then click on the 'Connections' tab > LAN Settings button. Make sure that there is a check mark in the box "Auto-Detection" parameters and that there is NOT a check mark in the box use proxy settings. Try to connect to the internet. Post your results please.

• I can ONLY connect to the internet with IE7 and Outlook Express

  I have Win XP SP3, home wired network, Netgear router, cable internet, Lenovo desktop.
  I can run IE 7 and Outlook Express and connect to the internet very well with these.  However, I can not connect using FireFox.  Windows Update returns an error and does NOT connect to scan my computer and display the necessary updates.  I just installed tax program this year HR CD block and it is unable to connect to internet to download the updates.  I used IE7 to go to the web site of the tax program to download the update manually, but it doesn't connect either.  I also can't complete installation OF Adobe (Digital Editions) program because it must connect to the internet in order to make a registration.

  I have disabled the Windows Firewall, do not have a configured proxy.  So, I can browse the internet with IE7 and get email with Outlook express.  I went on the site from Google Chrome to try to download it and install it that (using IE7 of course), but after I press the "Download" button, IE7 says that it cannot connect to perform the download.

  I scanned this forum and not seen similar symptoms that would allow me to reach a solution.  Everyone knows about this issue and how to resolve?

  P.S. I have two other laptops Win XP which CAN completely connect to internet with IE and Firefox via the same router and the modem cable.

  I tried trojan remover and none of the things in the menu utils found any problems.

  But it turns out that my problem was a hidden/partial copy of Symantec Client Firewall that I thought was deleted.  Over the months some programs had been updated and Symantec didn't know about them, so it was blocking their access: FROM Adobe, HR Block, IE8, Firefox, etc.  Given that I have not seen it listed in the start menu and it was not listed in Add/Remove Programs, I didn't have to try to remove it.  And it was not poping up to tell me of a new program attempts to access the Internet.

  I used the Symantec tool to remove all THE stuff of Symantec and it cleared up my connection problems.  I then reinstalled Symantec Client Security (antivirus and firewall) and turned off the Windows Firewall.