Use an exe in HTML (was: Exe)

Similar Questions

• Compaq Presario: Card mother SR5050NX update using SP37378.exe

  Help, I need an exe file to return the BIOS on my Compaq Presario, model SR5050NX, product number RX897AA-ABA, build software 72NAv3PrA2 to the specification of the manufacturer. The BIOs vendor is Phoeniz, release date: 20/04/2007, version of BIOs 5.17 string.

  I was updating the CPU so that I can install Windows 7 and I went to the website of Hp on the model SR5050NX and SP37378.exe.Seems downloaded and installed to give me version 5.23, however, when I rebooted the computer, I had the 'launch Startup Repair' which automatically said that he could not fix the CPU. I then use F11, Recovery Manager, who said "Detected Root Cause, current installation failure" great answer? Then, I used my Hardware Diagnostic Tools diagnostics bootable CD for Vista backup and reinstall all the software without result.

  Seems that SP37378.exe screwed up my computer, especially when the computer has worked fine before using the exe file.

  Logically, you would have downloaded the sp37378.exe on a CD and then run it from there. That would be the best avenue.   In addition, WIN7 is not supported with drivers HP on the SR5050nx.  This decision was made four years after the origin of the product Vista OS in 2007.

• Windows 7 is slowing down, block memory shows 98% use, wmpnetwk.exe

  While not all programs running or executing programs, I noticed windows 7 would start using my memory and I have a game lag and stop, I watched my indicator memory as it was up to 98% in use... I have 4 GB of RAM on my 64-bit windows computer 7.  I went to tools and wrote a check to see what type of program was a memory leak. It was the following program wmpnetwk.exe

  When I turned off wmpnetwk.exe my memory would be down to a single concert in use and 3gigs saving. When wmpnetwk.exe would start up... yet once I see the memory run out till he should reach the mark high of almost all my four concerts in use.  Even though I was sitting idle on my desktop without running programs the wmpnetwk.exe program would begin using this amount memory. While I can surf the net or running othere progams that I had to close this off progam or to stop running in the article taks a windows manager tools. Please correct this program in windows 7 as soon as you can... It allows windows 7 a eater of real memory... and very unpleasant to use.

  If you have ideas how to stop it please let me know... Thank you.  It's still the wmpnetwk.exe program that uses this memory.

  I reverse it noticing when CD importing to itunes. This has to do with Windows Media Center. If you use Media Center, do not change anything... If you don't use it, open it and go to settings > libraries.  You need to remove libraries for recorded TV, music, photos, videos, etc.

  Once you have removed all this, things should go back to normal. I noticed then that I import CD that my fan was super strong which was not normal. I looked into the Task Manager and saw that it was wmpnetwk.exe running - it was scanning the plethora of new songs I drop me off in my \Music\iTunes file.  Given that I have that off in Media Center, I had the problem since.

  Namely, I noticed that the CPU usage go as high as 20% on my laptop (chart below). When he died, the fan barely returned I hope this helps someone.

  HP DV7 laptop

  Core i5 clocked at 2.66 Ghz

  8 GB RAM

  Windows 7 x 64

• ntmsapi.dll missing when you use ntbackup.exe on windows 7 to recover my data from the windows xp ntbackup utility

  Hello, I was able to download ntbackup.exe on my computer, I just upgraded to windows 7 from windows xp.  However, I can't use the ntbackup.exe in windows 7.  But when I did, now I am unable to operate because the error message says missing ntmsapi.dll.  Can you guys send me the file or tell me where I can get it.

  Sincerely, Emmanuel

  Hello, I was able to download ntbackup.exe on my computer , I just upgraded to windows 7 from windows xp.  However, can not use the ntbackup.exe in windows 7.  But when I did, now I am unable to operate because the error message says missing ntmsapi.dll.  Can you guys send me the file or tell me where I can get it.

  Sincerely, Emmanuel

  Hello

  Windows 7 / 2008 R2 doesn't use NTBackup.exe to back up files. Instead, it uses SDCLT.exe (in %SystemRoot%\System32\sdclt.exe( ), which depends on the shadow copy volume service.
  
  
  If you do not want to install even when NTBackup.exe , you will need the files that you can get your Windows XP CD nt5backup.cab Cabinet or you can download them from the internet, then copy the files into a new folder (for example, copy the following files to %ProgramFiles%\NTBackup)
  • Ntbackup.exe
  • Ntmsapi.dll
  • Vssapi.dll
  • Ntbackup.chm
  • Ntbackup.hlp
  If you have an existing installation of copy of Windows XP is already installed, please copy the following copy in a new folder (for example, copy the following files to %ProgramFiles%\NTBackup)
  • %SystemRoot%\System32\Ntbackup.exe
  • %SystemRoot%\System32\Ntmsapi.dll
  • %SystemRoot%\System32\Vssapi.dll
  • %SystemRoot%\Help\Ntbackup.chm
  • %SystemRoot%\Help\Ntbackup.hlp

  NOTE: You may receive the following error when you start NTBackup.exe on Windows 7. This error can be ignored

  The backup utility cannot connect to the removable storage service. This service is required for use with tape drives and other backup devices.

  Please, get out and start the RSM service using the Services management console system function.

  
  
  Thank you
  I hope this helps :)

• Cannot write the coding using BBDevMGR.exe

  Hi ALL, I have to write a program to copy the files from the BlackBerry smartphone on desktop. I learned that BlackBerry Device Manager is used to communicate with BB. And we can write programs using BBDevMgr.exe, which is installed when BlackBerry Device Manager is installed. I was able to add a reference to BBDevMgrPs.dll, but could not able to create an object, or be able to view the public methods in it. BBDevMgrPs.dll is located in the same folder as BBDevMgr.exe. IAM writing the program in Excel VBA. I've seen the C++ code in Desktop_API_Reference_Guide_46.pdf, which uses BBDevMgr.exe. Help, please.

  I think that there you will not get the answer.

  Try asking your question on the communities of C++ developers who write applications for Windows.

  For example here: http://www.codeguru.com/forum/

• Impossible desire X 2 BIOS using sp69946.exe update

  I could not update my desire X 2 BIOS by using sp69946.exe. The executable brings up a window InsydeFlash 4.37 with empty fields for ID and the current and new BIOS versions. After a few seconds, a pop-up window will appear warning me that "No WMI! "Do you want to continue?"

  If I answer OK, current and new BIOS version fields show respectively 12 and 14 for less than a second, followed by a reboot. Use the Windows system information, see both before and after the BIOS attempt to update Windows detects my BIOS like InSyde F.12, 08/05/2013.

  I am running Windows 8.1 and have disabled my firewall and antivirus based on a previous thread, but the results are always the same.

  Where I'm going wrong?

  I came across the answer when the Tablet has detected an error during shutdown and presented me with a series of menus that led to an upgrade of the BIOS option. I clicked on this control, and the update process launched a series of this popup showing steps of flashing to V1.14. On my part, but a code of the Tablet is now where I want it to be. Thanks for your time.

• How can I connect my computer to my office remotely using mstsc.exe? (win xp pro sp3)

  How can I connect my computer to my office remotely using mstsc.exe? When I try the public ip address to our office, I just get the server computer, but I want Office away from my workstation?

  Hello

  You may have to contact the system admin of your workstation as they have disabled the remote access.

  However, you can consult this article for more information.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/ts_cmd_mstsc.mspx?mfr=true

• Problem when u - save the *.cod file using javaloader.exe

  I have a project for coding in c#.

  When I runing comand u save using javaloader.exe and then only to save file to the same folder as javaloader.exe .cod.

  So, how can I save to a different directory (folder).?
  Please tell my way. ! Thank you very much. !

  Yes, thank you replied.

  Now I got it in c#, I used the "FileInfo" and "MoveTo" properties

  Affter all recorded the *.cod file in the same directory with javaloader, I call "MoveTo" to move all in my repertoire *.cod file (file made by myself).

  That's all

  Code:

  for (int j = 0; j)< dem;="">
  {
  String filename = list_modules. CheckedItems [j]. ToString();
  FileInfo info = new FileInfo (path1 + "\" + name + ".cod");
  info. MoveTo (path2 + folder_name + "\" + info.) Name ());
  }

• can I use rapc.exe in my product?

  Can I use rapc.exe and net_rim_api.jar in my product to convert cod midlet?

  I hava a commercial product. And I want to support Blackberry program. Can I use api RIM and the environment? Is there a license number?

  you better ask rim. Maybe [email protected] can be a first contact?

• I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation.

  I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation. I did it

  Hello

  Please see error: 'Please install Adobe installation using Setup.exe' when you install non-English versions of Adobe Creative Suite 3

  Hope that helps!

  Kind regards

  Sheena

• How can I use an ipod nano that was synched to another computer?

  My daughter gave me his 2nd generation ipod nano because it is no longer use it.  When I plugged in my USB to load, I got a message informing me that there is an update.  It would not be updated beause "ipod cannot be updated because it contains files that are used by another application."

  What should I do to be able to use this ipod nano?

  I don't think that this message is related to the iPod is synced to another computer...  It is usually other applications or processes on the computer (which is not iTunes) accessing the iPod for some reason if iTunes is not able to perform the update.  However, your question in the subject heading ("How can I use an ipod nano that was synched to another computer?") is valid, since the iPod was previously used by someone else, with a different iTunes library.

  If you want to start using this iPod with your iTunes library and put on your songs, instead of doing an Update, you need to restore.  This erases the iPod, reinstalled the latest version of the software, and sets it to the default settings.  The iPod gets a 'new beginning', as when it was new.  To resolve the problem with this "files in use by another application" error message, try restarting your computer.  Immediately after the computer finishes starting up, run iTunes, plug in the iPod (if it isn't already) and try to do the restore (or Update).  If you still get this error message, please after return.

  If you are restoring, you can configure it to sync with your iTunes library.  You can post back, if you need advice on options for the implementation.

• I can't connect to my office using WPA2 network. I was never asked to sign in with my credentials, is not just to connect.

  I have my Surface RT. I can connect to my WiFi at home and my Verizon myfi without problem. I can't connect to my office using WPA2 network. I was never asked to sign in with my credentials, is not just to connect. My Windows 7 laptop, iPhone and IPad allows me to enter my network credentials and I can connect to my corporate network. The surface is the only I've seen fail to ask my ID. I imported certificates of company company of my such surface as recommended by people of the support surface. I even created a login account for local access with the same user name and password, still no luck. Any ideas?

  If you right-click on the network so that in the range of the context menu has the option "forget this network". This will clear the credentials and appears the next time that you connect the dialog to enter credentials.

  Make sure you have the updates installed December and supposedly includes improvements on the wireless.

• Equium A60: I get the error message using explorer.exe

  Whenever I try to open an image file using paint or Fax/Image viewer, or I try to drag a file to a folder, I get the following error message:

  "Windows Explorer has encountered a problem and needs to close. We are sorry for the inconvenience ".

  The error report says:

  "AppName: explorer.exe AppVer: 6.0.2900.2180 ModName: rpcrt4.dll.
  "ModVer: 5.1.2600.2180 Offset: 000847a 6.

  Also I can't open Web pages that open in a new window, IE. Norton Internet Security 2005 also does not open, but has claimed to be active in the background.

  Does anyone have advice for me?

  I tried all the help for explorer.exe on helpwithwindows.com problems but nothing suggested worked - as spyware, malaware removal. I ran a few controls on-line virus - given that Norton does not work I have tried the scans online.

  The laptop was bought last year, and we have lost the recovery CD - so if we need them, then where we can get replacements?

  Thank you very much

  Jonathan

  HI Jonathan,.

  It seems to me that if your OS has been corrupted, and I would recommend that you re-install. You can get the replacement of any Toshiba authorized Service partner recovery CD. You can get a list of the asp from the Toshiba web site.

  Kind regards

• Help! Problem using HPSCAN.exe or the TWAIN for HP Laserjet Pro cm1415fnw driver using Windows 7

  I used the HP Laserjet Pro cm1415fnw for over a year without problem.  When I first bought the unit, I was using a Dell with Windows XP desktop computer and connected to the printer via the USB port.  I was able to print and scan from my computer, even in applications that use the driver scan TWAIN such as Word, Acrobat, etc.

  I've since upgraded to a HP slimline s5-1160 computer using Windows 7.  I installed the software my installation CD Laserjet is no problem.  The printer is connected to the computer by USB port.  I can continue to print without problem.  However, I am is no longer able to scan using the HP (HPscan.exe) software, or applications that use TWAIN scanning driver such as Word, Acrobat, etc.  When I try to do, it takes a lot of time before he asks me which scan TWAIN driver to select.  When I select the MFP from HP cm1410 series, the program hangs or returns to the State wherever it was before I tried to scan a picture in a document from the program.

  I can scan however successfully using the Wizard Windows Scan / Fax or if I choose "Devices and printers" in the Start Menu and select 'Start scan' in the menu after right-clicking on the HP printer icon.  However this option restricts my use of the scanner - I can't scan to PDF and I can scan several pages in an OCR application.  I have to analyze on a JPG or TIF or PNG.

  What to try to solve this problem, I did the following without success:

  1. Uninstall and reinstall the drivers and software complete (and using the most recent version on the HP site)
  2. Change ETIOU USB ports
  3. Run the HP scan diagnostic utility, which seems to show an error to the WIA, scanning stage and then recommend that I have uuninstall and reinstall the full software.  When I skip that and allow it to check for TWAIN scanning, it gives me a similar error, suggesting I use the latest version of the drivers (the driver that I use is v 3.0 dated 12/11/2009) so in this case the utility of diagnostic scanning HP provides NOT a fix for this problem other that uninstalling and reinstalling , which I did several times without success
  4. Contact HP support for the computer and the all-in-one (which as I understand it there's different support staff).  Staff of the printer claims it's a software problem and that the staff of the computer must be able to resolve the issue (something not having "launchpad" installed correctly.  When I communicate with the staff of the computer, they say it is a printer driver problem.  So I'm at a standstill
  5. I studied the HP support forums to see from this link - http://support.hp.com/us-en/document/c02661093 - if you can't scan from software HP you can use programs that rely on WIA (Windows Fax and Scan) drivers that I already know I can do it, but implies that HP doesn't have a solution to find out how to scan using their own software!

  My gut tells me that he is one of those problems that many others perhaps, but for which there is no viable solution.  It is possible that during the uninstall and reinstall the software, remains can stay behind that prevent the proper functioning of the drivers, but without knowing how to "clean up" specifically those remains before you reinstall the software, I am at a loss.  Oh and by the way, I also tried using CCleaner and Norton Registry Cleaner to try to clean up these remains, but that effort did not help.

  My question is basically this... or does anyone know of a fix for this problem should I resign myself to use the Wizard Windows Fax and Scan to scan documents and pictures, and forget about using TWAIN programs like HP seems to suggest?  I think that because I use a HP printer/scanner and a HP with Windows 7 computer, this problem should NOT be a problem!

  Hi Radiopeople,

  Follow the steps below to check the WIA Service:

  1. type services.msc in run or search and files program

  2. scroll the page up to the WIA Windows Image Acquisition

  3. make sure that the service is running. Click on stop and then restart to ensure

  4 restart the computer

   

  Restart the services of dependencies:

  1. Click Start, in the search box type 'service ' without quotes.

  2. scroll down until you see Windows Image Acquisition (WIA).

  3. double click on it and go to the Dependencies tab.

  4-2 services must be listed.

  5. close this window and look for the remote procedure call (RPC).

  6. make sure it's on manual or if it is enabled automatically, just leave it. Make sure the service is started.

  7. go to hardware detection kernel and Double click.

  8. set the Startup Type to manual and click on apply.

  9. you should be able to start the service by pressing Start.

  10 now, you are done and the Twain Manager must work and gives you is not a mistake.

  Check the dependencies or sous-dependances:

  Right-click WIA (Windows Image Acquisition) by selecting the first Properties , and then click the dependencies tab. It should list: remote procedure call and Detection of Harward Shell

  Under the CPP, it will then list DCOM Service Process Launcher point final RPC Mapper date back to the start all the items listed as dependencies or dependencies under WIA void list main services.msc and right click then

• How can I create a shortcut to "change user" on the desktop using rundll32.exe in Vista Home Premium?

  I am trying to create the shortcut to "change user" using rundll32.exewithout to create the shortcut to "lock", only to pass the user. I already know that I have to right click on an empty space on the desktop, press New\Shortcut and type%windir%\System32\rundll32.exe user32.dll,but not after the comma. Type so I can only create the shortcut to "change user" and not the shortcut to 'lock '? (This means that I don't want this: %windir%\System32\rundll32.exe user32.dll, LockWorkStation, with LockWorkStation after him.)

  Unfortunately, it can be done in your version of Vista (or so they say, hang on a moment.)  I found the article according to that cllaims to do in Vista Basic and Vista Home Premium in addint a file and shows a set of procedures.  As it is a 3rd party file, do so at your own risk. http://www.vistarevisited.com/2008/08/02/create-a-desktop-shortcut-to-switch-users-in-vista/.  NOTE: This is not how you suggested higher, but if it works who cares?

  In case you don't want to consider the solution above, you have refused, here is the procedure (how to do it in other versions of Vista):http://www.vistax64.com/tutorials/136969-switch-user-desktop-shortcut.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.