use bluetooth on myRIO

Similar Questions

• Can not listen using bluetooth headphones with music Apple after updating iOS 10

  I've updated my iPad to iOS 10 Air yesterday. This morning, I plugged my bluetooth headset and tried the Apple music (specifically, the NPR radio station). It sends output to the speakers of the iPad and not the bluetooth headset, and after several attempts does not connect to the bluetooth headset. I checked the bluetooth connection and verified that I could hear Siri through headphones. But Apple music seems not to want to use bluetooth headphones, whatever it is I'm looking for.

  Any suggestions or help would be greatly appreciated.

  Hi the edema,

  It is my understanding that you are experiencing some problems with Apple's music stations on your iPad don't play no not by your Air Bluetooth headset. I listen to music Apple all the time and I know it's nice to be able to listen to the radio stations with headphones. I will do my best to help you.

  As you have noted that you can hear Siri through Bluetooth speakers, you can also try a different like YouTube app to see if you can hear the audio from there through your headphones? In addition, if you do not already made, conclusion of the music app and reopen it and try to play the station again. This happens just this specific station or any station you are listening to?

  Even if you did the following steps part of this article, to get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device, there are a couple of additional ones that can help.

  1. Make sure that your device iOS and Bluetooth Accessory are close together.
  2. Make sure your Bluetooth accessory is on and fully charged or connected to power. If it uses batteries, test them to see if they need to be replaced.
  3. Restart your Bluetooth accessory.
  4. Make sure you have the latest version of iOS on your iPhone, iPad or iPod touch.
  5. On your iOS device, go to settings > Bluetooth and make sure Bluetooth is on. If you cannot turn on Bluetooth or you see a spinning gear, restart your iPhone, iPad or iPod touch.
  6. Cancel pairing the Bluetooth accessory, replace the accessory in discovery mode, then the pair and plug it in again.

  Thanks for stopping by Apple Support communities. See you soon.

• iPod touch will not connect using bluetooth

  New iPod Touch model MKJ02LL/A does not connect using Bluetooth

  Try to connect again redfish Bluetooth music receiver model RF-BTR315

  and

  Radio in Toyota Camry

  Sometimes (after restarting the iPod of parts and the music receiver) the music receiver will appear but then not pair.

  It never connects to the Camry.

  Redfish and Toyota says that they are compatible with your iPod model and its iOS?

  Ry, you can:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset the car system and the device of redfish

  . - Reset network settings: settings > general > reset > reset network settings

  -Restore from backup. See:

  iOS: how to save

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

• How can I use bluetooth on my Satellite C850-B906

  Please help me. How can I use bluetooth on my Satellite C850-B906. I can't find on the bottom of the search, and even in the PC device, bluetooth is not there. This laptop has bluetooth according to its specifications. (Bluetooth / WiFi (802.11B/G/N).)

  Good response will be highly appreciated.

  Thanks in advance!

  Hello

  I m not sure but I think you've got your laptop computer without an operating system preinstalled.
  The question is: which OS you have installed and that you have installed all the drivers needed, including BT (Toshiba BT stack) software?

• Cannot use Bluetooth on my Satellite L750D

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source.

  (Code 52) "that's why I can't use bluetooth, I downloaded the driver, intsalled, but his does not work."

  What should do?

  Hello

  The laptop supports Atheros Wlan and BT combo card.
  Before installing the Toshiba Bluetooth stack, you need to install the Atheros BT filter (located on the European driver Toshiba page)

• How to use bluetooth / infrared

  Hello
  I have a satellite M40-170
  and I don't know how I can use bluetooth or infra - red
  I want to connect my mobile phone with computer
  but I don't know how I should do?

  can someone help me
  Thank you

  Hello

  First of all, it depends on the device you want to connect to the laptop. I'm sure that each unit must have a manual of s with appropriate explanation. It is also important that software that you use and how it should be configured. Moreover, as I know M40 doesn't have the Bluetooth module. Do you use a USB Bluetooth stick or something like that?

  If you want to use the infrared device must be activated in the IrDA device manager. Parameters and properties IrDA, you can find in the Panel under the wireless link. If the mobile device is on the right position, you will see that the laptop will be able to establish an infrared connection.

  I found an interesting topic on using the LV. Check it on http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2135&messageID=5915#5915.

• Is there a delay in the signal when using Bluetooth on any iDevice and, in particular, on an iPad Pro?

  I am using Bluetooth involved in the use of music made a software with sounds of digital instruments using a musical keyboard hardware connected via the USB cable to Lightning to play sounds from the app on my iPad Pro.

  When I try to use a Bluetooth speaker source, there's a 1-2 second delay when I play a chord in the app and when the sound is played through the Bluetooth speaker.

  This delay IS NOT the case when I use just the iPad Pro speaker on when I am attaching some small travel speakers to the headphone jack of my iPad.

  Only when I try to use my Bluetooth speakers sounds better.

  I use a keyboard master Korg MicroKey Air uses the USB port play their own Korg music make its app module.

  Someone who makes music on an iPad with this problem at all?

  Is this a problem question Bluetooth and/or iOS?

  My iPad Pro isn't very strong using these apps do and travel speakers I use plugged into the headset jack music are a little better on the volume, but tend to deform when I try to increase the overall volume level.

  I intend to put this issue on the web forums for Korg, but want some answers from anyone who has been playing and recording music on their iPad using an external keyboard to play and record music in an app to do the music.

  Also, (and I intend to ask this in the GarageBand for iOS forums) can the iOS version of Garageband output sound on a Bluetooth speaker and quietly delay, too, that I can not get the iOS version of GarageBand to sound output via Bluetooth to a Bluetooth speaker.

  Hi, MichelPM

  According to the used speaker, he will always be * some * delay when using Bluetooth to stream audio from an iOS device (or practically any device BT also) through a Bluetooth speaker. I have a Bluetooth speakers system cheaper that I use with my iPad mini 4... I pretty much use it only to listen to sound. If I try and use it for Pinball iOS games I play, there is a delay of environ.5 second anywhere, I'm the speaker. Exactly same phenomenon occurs with the keyclicks when you type it on the iPad keyboard... 5 second delay & even with some applications of synthesizer iOS that I use (Animoog & Arturia iSEM). I think it's just the nature of the beast of Bluetooth.

  Higher quality speakers would be better, but I'm not spending more money to find out.

  If you want an immediate response with zero real audio keypress delay, I fear, the only way to do this is to use a wired speaker.

• How to use bluetooth to a Satellite L750/l755 running Ubuntu 11.10

  Hello

  I have install on my Toshiba Ubuntu 11.10, but I can't use the Bluetooth.
  In the web I found that I had to install omnibook, but I'm not able to do it, can someone help me?

  Thank you!

  Hello

  Please tell me what you mean when you say that you can not use bluetooth.

  He appears in the systray as you should be able to use it or it seems not at all?
  Could you also tell me what model you have.
  It is shown in the background of your pc.

  Thank you!

  Tom

• Sam 80-127: How can I use Bluetooth?

  Hi, I have a laptop of SA-80-127. IAM is a little confused as to how I should use Bluetooth with it.
  I tried after the installation of TOSHIBA bluetooth stack, but every time "device Bluetooth is not ready" message, when I try to access.

  Can anyone please guide me on this or give link to a relevant thread as soon?

  The A80 has a Bluetooth device in option. You are absolutely sure that you bought a machine wil that he installed?

  If so, you must make sure that the wireless switch is enabled, you have the BT device selected using Fn + F8.

• Peuvent mini-Macs communicate-to-peer using bluetooth?

  If so, can I use X 11 to do?  X 11 is, indeed, a cross-windows application?  Should I use for transfer error correction?

  Whickwithy wrote:

  Mini Mac connect-to-peer using bluetooth does

  I do not know.  There is an entry in the preferences system-> network of bluetooth devices, but which may be limited to attach to a cell phone to access the internet.  I'm not sure.  You can experiment with the configuration of the network at least.

  OS X Yosemite: connect to the Internet with a mobile phone Bluetooth active>

  If so, can I use X 11 to do?  X 11 is, indeed, a cross-windows application?  Should I use for transfer error correction?

  If you get a network connection, if you can get X 11 to talk, she must be the connection TCP/IP and TCP protocol provides a reliable transfer.

  Just checking, but you know that OS X is NOT X 11 as its windowing technology.  You can use XQuartz for X 11 using a Unix or Linux system.  But you won't be able to say a typical application for Mac that his DISPLAY server is more about it another system.  The best you can do with OS X is use screen sharing to display applications running on the remote system.

  NOTE: Bluetooth is not a fast transport and X 11 is a very chatty Protocol.  If you get X 11 windows displayed through the Bluetooth, it's perhaps not as sensitive as you use a WiFi or Ethernet connection.  Not having done something like that, I'm just speculating.

  If you can get a connection, then chances are you can do ANY kind of network operation in all of what the Mac is normally supported.

• How to use Bluetooth instead

  WWant to use Bluetooth because the wifi is not available

  For what exactly?

• Satellite P100-286: cannot use Bluetooth after installing XP

  I have a portable P100-286 Satellite with bluetooth. It used to work OK but since I re-installed Windows XP SP2 I can't use bluetooth.
  There is nothing in the control panel and nothing in the hardware Manager that mentions the bluetooth.

  I installed al the latest drivers and BIOS updates and still nothing.

  Does anyone have any ideas why I don't see bluetooth?

  I think that you didn't install the driver BT properly and didn t activate BT

  First download the pile of BT since this Toshiba BT Portal:
  http://APS2.toshiba-tro.de/Bluetooth/

  BT installation restart the laptop and turn it on by using the FN + F8 key combination!

  Hope that this will enable BT again

• pouvez iphone with ios 9 use bluetooth 4.1 5

  pouvez iphone with ios 9 use bluetooth 4.1 5

  Hello ajwaka,

  After reviewing your post, it looks like you want to know if the 5 s iPhone supports Bluetooth 4.1. I recommend you to read this article.

  iPhone 5 s - technical specifications

  Cell phones and wireless

  • Wireless Bluetooth 4.0 technology

  Thank you for using communities of Apple Support.
  Good day.

• Impossible to use bluetooth

  Dear Sir.

  I have hp 15 d-107tx and my bluetooth device is no allowed to associate one any device please send me a link for the bluetooth driver and also driver connection manager to send to my above mentioned hp laptop model, I didn't purchase it last 4 days back and face this problems is not good...

  Hello hani786, welcome to the Forums of HP.

  I see you are trying to use bluetooth and cannot get anything for the pair. I will try to help you with this.

  For starters, what is the operating system installed on your laptop?

  Use of Bluetooth (Windows 8) devices, use of devices Bluetooth (Windows 7) - follow your operating system, they can help you.

  In addition, if you could, in Device Manager, you should have the bluetooth icon, click on the '+' next to it, lists the adapter/driver - please provide the name of listed factory (ex, Broadcom, Realtek etc.).

  Let me know how it goes, thank you for display on the HP Forums.

• Laptop HP pavilion TS 11: using Bluetooth

  Hi, I need help, discover how access and use Bluetooth on my laptop, can someone help me? Even a link to a help because k page have no idea.

  Cheers, Ivanitchybum

  Hello

  Thanks for the reply