I get an error message indicating that "transferred to the point must be a string or an integer.
Can anyone help?
Hello world
I would like to recommend the following alternative syntax as easier to debug and run more quickly:
Set FlowChannels = Data.GetChannels("*/*FLOW*")
jMax = FlowChannels.Count
FOR j = 1 TO jMax
Call Data .move (FlowChannels (j), Data.Root.ChannelGroups (4).) Channels, j)
NEXT ' j
I'm a newbie to labview, so it is perhaps easy to answer.
I would like to perform a calculation which, according to the test unit, will require a different numeric value to use in the Calc.
I tried to use a Boolean switch to choose which constant must be used during runtime mode as well for example or 0.01 or 0.02 will be selected. The idea is to labview so insert the constant selected in the calculation and spit out the answer.
There is only one output on the Boolean toggle switch and not of entry so that I can't work out how to do it. If there were 2 inputs and 1 output it would do the job.
I have two 1142Ns in stand-alone Mode. Both have a similar configuration with the exception of the static ip address. Each access point has two combinations of SSID / VLAN on each radio. An SSID is static WEP (not my choice) and the other WPA2 Personal Mode.
Originally, I had separated them so that one SSID would be available on each radio so it would be possible to distinguish the radio longer than bandwidth by SSID. I was told to change to have the two SSID on both radios.
Looking at the tags with inSSIDer, I noticed that on the same radio, two SSIDS are broadcast on the same channel.
Is only configurable at different or anything I should change in this configuration? If they are multiplexing two SSID on a canal, which cut my bandwidth down, or is - band just for the tag, not the actual data channel?
Sorry for the newbie questions. My installation is coming and I'm always trying to get up to speed on potential problems. Thank you for you account.
See the attachment for visual
Communication channels for the radio... so, if you're settings perticular channel of a Radio no SSID... Using the same channek never decreased BW but interference increases...
radio channel can be changed using the below command...
I found a similar, but not exact question and I was wondering if I could use the VGA cable AND cable DVI simultaneously on a HP 2159 m monitor and switch back and forth from analog and digital using the source switch on the screen? I noticed that some casual games such as found at BigFish and other gaming sites works best on VGA on DVI but I like to watch movies and other DVI instead of VGA?
I did two HP 2159 m monitor but it could in fact be wise space more convenient to just use the right now and switch from the analog to the digital format.
Thanks for any response.
Hello
You will need to edit the video in the monitor source selection when you want to switch. Don't put it on AUTO.
For a test, connect two monitors and then configure your PC for two monitors. Then, remove the monitor as the secondary (VGA) and now connect the cable to the main monitor VGA port. Now try the video source selection in the menu of the monitor. I never tried it on my 2159 m but it can work.
I created new BBID using my outlook account. When I tried to update the old BBID by this new device Z30, it shows message "this username is already in use. Enter a different user name. ». While this 'my new ID' has never been used in any device of BB before that. Please guide me on this issue.
Thank you
Qayzar
Ok. The key is what you started with. Your device has been associated with a BBID. You created a new BBID and now want to associate the device with the new BBID. To do this, WIPE the device. But there are contingencies.
First of all, don't forget that it is actually what you want to do. There is a difference between changing the email address associated with a BBID and change the real BBID. You must be sure that your intention is here. If you change the real BBID, you will lose then all contacts in BBM, BBWorld records of purchases and other things. If instead, you change the e-mail assigned to the BBID existing address, none of this will be lost.
Continue with this section only if your desire is to change the real BBID bound to the device (and thus lose your BBM contacts, BBWorld purchase recorde, etc.).
If you run any OS in the beach of 10.3.2.xxxx, then it is mandatory that you know the credentials for the BBID that is currently associated with the device... If you do not, then you can not continue what you intend. 10.3.2, the compulsory anti-theft function is in place, and when you start the WIPE on the device (in order to divorce the device from the current BBID), you will need to enter the current BBID credentials in order to move forward. So, if you don't know these credentials, then stop now and say that we will have to give you different instructions.
But, if you know your BBID identifiers OR you're not on the 10.3.2 branch OS, then you can go ahead with the WIPE on the device and then associate the device with the new BBID as part of the initial installation. Of course, before you start this, you want a good backup link, a manual copy of the memory of your device to your PC and complete documentation of your configuration (identification information of account, adding applications, configurations, etc.). Sometimes, restoring a backup returns unit corruption even, must be eliminated and reconfiguration from scratch can solve that. Indeed, since you will change the associated BBID, backup, you take now (with the old BBID) will probably not usable as a source of restoration, later (with the new BBID) and thus you probably you must manually configure everything anyway. If you used the OTA servers (e.g., Google, Outlook.com, etc.) as the location of data storage 'master' for your contacts and calendar, it shouldn't be a big problem because these data will repopulate the device to these servers when you reconfigure the account. But, if you have used 'local' for these data, the challenge will be much larger.
Proceed with this section only if your intention was to keep the existing BBID but to change the e-mail address are attributed to him (and NOT lose your BBM, records of purchases BBWorld, contacts etc..).
If your original intention was not to change really the BBID but rather to simply change the email address associated with the BBID, you never have to have created the new BBID at all... instead, see:
Since then, however, you have created the new BBID, then you will have to destroy the new BBID first and then make the change of address email documented in the KB. To destroy the new BBID, consult:
I allowed out of my laptop to use CC on a different machine, so I cancelled CC on this machine to return to my laptop (a - ish Mac Pro El Captain running). Photoshop and Illustrator are are properly, but Acrobat DC behaves as if the license has not come back, and I can't CreativeCloudInstaller to start. I tried to reinstall the CC installation by downloading the .dmg on adobe.com, but when I try to open the .dmg to do the installation, OS X says "the following disk images could not be installed: CreativeCloudInstaller: no mountable file system. I thought that the file could have been damaged, so I tried to download again. Same error and two .dmg files are bit for bit identical. I downloaded the CreativeCloudUninstaller and had similar problems. Download and open files from other sites .dmg works very well. Are your broken Web sites?
I would like to you use PS on two different computers at different times: I may have?
Yes, your license allows you to have two machines with active installations. As long as you do not use the license on both machines at the same time you comply with the terms of this license.
Hello, I need help, I can't play the video using Facebook. Works very well in Youtube. I use Safari. Tried different solutions such as changing preferences, reinstalling Flash.
Hello
Please try following the steps and see if it helps
I'm editing a wedding ceremony. There are two cameras on the couple in different angles, and there's a camera roaming the Church for the detais on the audience. I synchronize in a sequence, cut the fragile parts on the roaming camera and I alternate between the two cameras. I don't see what is behind the layer hierarchy, so I disable its visualization in itself what happens on other devices, and it's quite unpratical.
So, how to do? To make an extract from the different outputs for different video channels on the same sequence?
Editing MultiCam Mode is something, you may want to consider.
I bought my laptop in Czech Republic. Now, whenever I have to contact the support, I'm redirected to site Czech support as soon as I get the serial number. I don't speak Czech, nor I intend to learn it soon. Although the site offers only Czech, Slova
I have a second hand Portege 3500 with WXP tablet 2005 Server Pack 2 market version, but without the original disks. However, recently had a virus that did something to Prime the area on the hard disk. I have removed the virus but now get unexpected
We are implementing 4.7 (2) of the NAC in a configuration of OOB VGW. I enclose a PC to the switch port and the unit isn't getting an IP address. I did catch package to confirm that I don't see DHCP detects or requests coming from the CASE or the PC.