Use integrated Advisor automatic segment does not work.

Similar Questions

• Integration of keyboard shortcut does not work without supervision on T450

  We received some new T450 for our company and I'm putting the shortcut keyboard on it integration tool but it does not work without supervision. I can install it manually with the command-> setup.exe/S/b/m/h, but I need to do for 400 machines with a deployment tool, and here I am stuck.

  I use the latest version of 5.51.001. It works very well for the T540p and more but is not visible for T450.

  Just to be clear, it installs successfully on T450 but does not work, if I push the buttons on the keyboard.

  OK, nevermind guys. I had to do a restart and everything worked.

• Automatic update does not work. Unable to load Windows 7 or SP2. Error "cannot find the file specified."

  original title: automatic update does not work. Unable to load Windows 7 or SP2.

  XP Pro, automatic updates do not work.  Unable to load Windows 7 or SP2.  Error on SP @ is "cannot find the specified file.  Tried to load files noted missing for Windows 7, but was not able to load either.  All the other conditions to download files.

  Hello

   

  
  1. have you downloaded the stand-alone package for the service Pack 2 or are you using Windows update?

  2. you also try to install Windows 7?

  
  Method 1.
  Run Disk Cleanup and disable the security software and then try to install the same and check.
  See the article below for disk cleanup:
  http://support.Microsoft.com/kb/310312

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2.
  If the problem still exists together own starting the computer and attempt to install the service pack.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After that troubleshooting is complete, configure the computer to a normal startup. See the "steps to configure Windows to use a Normal startup state" section in the article above.

   

  Also, it is recommended to install the Windows XP service pack 3. Reference:

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I need to export contacts as vCard iCloud to able to use android phone, but it does not work

  I need to export contacts as vCard iCloud to able to use android phone, but it does not work

  Help, please

  We need more than "does not work" to be useful.

  How do you try? Is there an error message?

• Automatic update does not work anymore

  My problem is that automatic update does not work anymore and when I try to next turn to the I get some really long file name is missing. I can not down load and reinstall Security Center because it will not only because it is included in Vista. I can't load it updates as the software that is designed to do this does not work. I can't copy and paste the error message due to the fact that I am not given the choice.

  Is enyone knows how to get around this problem.
  The message I get is that Windows does not find:-': {26ee0668-a00a-44d7-9371-beb064c98683}\5\::{36eef7db-88ad-4e81-ad4...     I think that there is more than that, but it does not fit in the window.

  I am running Vista sp1

  Ian Robins, what are the errors that you receive with this procedure? What step gives you access denied? You can attempt to acquire the files listed for a known working machine, but let us try the following:

  It is a simple procedure of rearmament and included are the steps to paste the result of the command prompt, so we read what it gives you:

  1. Click Start and type cmd in the box start the search.
  2. Right click on cmd in the list programs, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. At the command prompt, type the following command and press ENTER:

  net stop wuauserv

  net stop bits

  net stop cryptsvc

  Ren %systemroot%\System32\Catroot2 Catroot2.old

  net start cryptsvc

  Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old

  regsvr32 c:\windows\system32\wuapi.dll

  regsvr32 c:\windows\system32\wuaueng.dll

  regsvr32 c:\windows\system32\wucltux.dll

  regsvr32 wups2.dll

  regsvr32 c:\windows\system32\wups.dll

  regsvr32 c:\windows\system32\wuwebv.dll

  net start bits

  net start wuauserv

  net start Eventlog

  1. Click the icon in the upper left of the window, click on edit, then click on select all, press the Enter key.
  2. By pressing CTRL + V on your keyboard to paste the content in your response.
  3. After a validation or record your response, close the command prompt and restart your computer, and then test Windows Update again.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I currently have an ad - one that I use frequently on IE8 which does not work on IE9. How can I stop to get a message that I have new updates when IE9 is the only update?

  I currently have an ad - one that I use frequently on IE8 which does not work on IE9.  How can I stop to get a message that I have new updates when IE9 is the only update?

  Hi altak38,
   
  -What is the add-on which you speak?
  -Are you referring to Windows Update with Internet Explorer 9 update several times even if it has been installed?
   
  If so, follow the steps in the following article to resolve this problem.
   
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
   
  Post back with more information for the issuance of the add-on - to help you help.

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• using Xp the sd popup does not work on the insertion of the sd chip into the slot, how can it be repaired?

  normally on the insertion of the sd chip a pop-up dialog box appears asking what route you want that information to sd etc. This pop up does not work and the only way I can get into the sd information is to search on D:, then click on 'Open' please notify if MS can restore the pop up facillity?

  Hi JohnWack,

  Welcome to the Microsoft Community Forums.

  We're here to help and guide you in the right direction.

  According to the description of the problem, I understand that you do not get the AutoPlay option when you insert the SD chip into the Windows XP computer.

  -What do you mean by "what route you want to than the sd information etc."? Are you referring to the auto play feature?

  Try these methods.

  Method 1

  Double-click on "My Computer", right-click on the drive you want to Auto play and click 'properties '.

  Click the 'Auto play '.

  Method 2

  Steps to enable AutoPlay.

  1. start, click run, type Gpedit.msc in the Open box, and then click OK.
  2. under Computer Configuration, expand models of administration and then click System.
  3. in the settings pane, do a right click Enable Autoplay, and then click Properties.

  For your reference.

  Windows XP does not recognize a secure digital card when you reinsert it after you remove it
  http://support.Microsoft.com/kb/812661

  It will be useful.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• function of automatic update does not work. Ran the Fix - it program, shown fixed, but did not.

  Unable to set the automatic update function. He has worked previously.  Also when I search Microsoft Update for updates that are critical or custom, they appear as available but will not download.  I ran utility troubleshooting of Microsoft Fix - it, which indicated the repair was made. But still does not work. Thank you

  Hello

  1. what happens when you try to download the update?

  2 troubleshooting of Microsoft Fix - it are. what tool you referring?

  3 did you change on your computer before the show?

  Follow the following troubleshooting methods:

  Method 1:

  I suggest you perform the steps of troubleshooting links and then check if it solves the problem.

  Cannot install Windows updates

  You cannot install some programs or updates

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: How to back up and restore the registry in Windows XP

  Method 2:

  Reset the Windows Update components, and then check if it solves the problem.

  Follow the steps from the link: How to reset the Windows Update components?

• Table, shuffle a part of a table using start and end Index does not work properly

  Hello
  I used a method to mix a part of an array, but I noticed that it does not work very well.
  When I run this method sometimes I empty array values.

  So if you try the example below and test out a few times would get you a good result but sometimes a wrong result.

  
  For example, when I run the present I get in my trace output:

  a, b, c, d, g, e, f (here after the g it won't)

  a, b, c, f, g, d, e (here it goes right)

  a, b, c, d, g, f, e (here I'm not)

  var myArr:Array = ['a', 'b', 'c', ', 'e', 'f', 'g'];

  function shuffle(myArray:Array,_startIndex:int_=_0,_endIndex:int_=_0):Array {}
  if(endIndex == 0) endIndex = myArray.length - 1;
  for (var i: int = endIndex; I > startIndex; i--) {}
  var randomNumber:int = Math.floor (Math.random () * endIndex) + startIndex;
  var tmp: * = myArray [i];
  myArray [i] = myArray [NombrAl];
  myArray [NombrAl] = tmp;
  }
  return myArray;
  }

  trace (shuffle (myArr, 3, 5));

  No one knows where he goes wrong and why nobody on the web discovered this problem previously, because
  When I googled on this topic, I found other methods that also sometimes fail.

  Kind regards
  Chris.

  var myArr:Array = ['a', 'b', 'c', ', 'e', 'f', 'g'];

  function shuffle(myArray:Array,_startIndex:int_=_0,_endIndex:int_=_0):Array {}
  If (endIndex == 0) {}
  endIndex = myArray.length - 1;
  }
  for (var i: int = endIndex; I > = startIndex; i--) {}
  trace (i)
  var randomNumber:int = int (Math.random () * (endIndex + startIndex-1)) + startIndex;

  var tmp: * = myArray [i];
  trace (i, randomNumber)
  myArray [i] = myArray [NombrAl];
  myArray [NombrAl] = tmp;
  }
  return myArray;
  }

  trace (shuffle (myArr, 3, 5));

  There were a few issues going on here.  The first is that you used the index end to the random number, but should be the difference between the beginning and the end.  the second is the > = start index in the loop.  give this a go.

• Tilde key used to turn the model does not work

  I recently got a new mac with cc Adobe installed.

  In general when I want to turn a boss, I simply press the tilde key and manipulate the model, but on this new computer, it does not work. Instead, the entire shape moves, and I'm unable to move the model. Y at - it a setting or something that might have to be adjusted?

  It drives me crazy that I can't understand it.

  Thank you in advance!

  You should find the forum for any product it is and post your questions there.

  Here is a link to a page that provides links to all of the Adobe forums...

  The Forum links page: https://forums.adobe.com/welcome

• The service "wuauserv" (automatic updates) does not work correctly

  The service 'wuauserv' uses constantly between 88 and 95% of my CPU, slowing down my computer to the point that it is almost unusable, so I've been suspending or disabling the process 'wuauserv' every time I use my computer.

  In addition, Windows Update does not, if "wuauserv" is suspended or not.
  It prevents just check the latest updates and never stops to do that no matter how long wait.

  Well, I managed to solve the problem.

  I followed the instructions on this page: http://workingscripts.blogspot.com/2008/05/windows-update-high-cpu-usage-fix.html

  Immediately after that, Windows Update and the automatic updates service finally started working again. It has been almost two weeks since I fixed it and have not had a problem since.

  I didn't format the hard drive and do a clean install of Windows XP for this problem - I have never done this because it does not seem necessary.

  And I do not see how this relatively recent automatic updates problem never touched my other problem Installation of Internet Explorer years discussed in my other thread.

• Automatic Updates does not work how to operate

  can not get the automatic updates to work, he says to turn on updates, we tried to

  Hi Diana,

  There are not a lot of information in your post, but if it worked before this problem, the most basic troubleshooting tip is to reset Windows Update components manually or use the automated "Fixit" solution provided in the link below.

  How to reset Windows Update components.

  http://support.Microsoft.com/kb/971058

  If the link above does not solve the problem, please provide more information on your system so that we can better help you. For example,.

  1. brand and model of your computer.

  2 installed AV and the current status of the subscription.

  3 OS (XP... ... Vista wndows 7) and the level of service pack (SP1... SP2 or SP3). To check your level of SP, press simultaneously on the of the windows logo key + pause/break key .

  Good luck.

• BlackBerry Blackberry Q10 Assistant on automatically - keyboard does not work

  Hello

  I have my phone Blackberry Q10 now for 1 month, and since a few days the problem has turned up, randomly Blackberry companion light automatically. Sometimes visible through the open window, App - but sometimes also without this, but you recognize because the keyboard no longer works. This can happen when you type a message.

  The wizard then opens whenever I press the power button to lock the display so that the screen doesn't lock.

  In all this is very annoying and makes the phone in time allmost impossible to use.

  The solution only little time that I found is to close the wizard via the app Manager, but then it starts itself after maximum 1 h and the problem continues. I tried to disable all the functions of the wizard, but it does not help.

  I would be very happy for any help with this problem. For example, is it possible to delete/disable the wizard?

  Best regards

  JWI

  PS: OS Version is newly updated to 10.3.2.2836, but the problem existed before the update

  Hi jwi,.

  Welcome to the BlackBerry Support Community Forums

  Have you tried pulling the battery for a few minutes?

  If it does not please re install the software via BlackBerry link but make a backup first if you want to keep your data.

  Ice

• Automatic connection does not work after re - install

  Visited bad link in Facebook! Subsequently, forced to re - install Firefox - from scratch! Saved some files profile as Favorites, passwords, but no extension tricks. Re-installed FireFox after removal of ALL titles I could find in Program Files, Program Files (x 86) and Windows 7 Pro profile.

  When visiting a page that requires a login, Firefox correctly fills the username and password. BUT it does not start the connection. In the past, it was essentially a background process and not really visible to me. Now, stop at the page requesting credentials and click on the button "login".

  I have 'THE VIEW', 'NOSCRIPT' and 'ADBLOCK PLUS '. ALL my plugins are in mode 'ask to activate '.
  I enabled extensions: 'ADOBE ACROBAT - create PDF 1.2' and 'Trend Micro NSC FireFox Extension 5.82.0.1056.

  I would definitely get FireFox to work as it did previously. I don't know where watch/tweak!

  Thank you
  WLPeavy

  Thank you. It was the cookies which were to be saved. I had no idea of the automatic logon which is recorded. Thanks again.