Use management/KVM ip addresses several areas of the UCS

Similar Questions

• How to use develop/Tone/Auto on several pictures at the same time?   v.1.4

  How can I use develop/Tone/Auto on several pictures at the same time?

  Highlighting multiple photos and clicking on it did not work for me, if I can get it to work on a single photo at a time.

  Method 1:

  1. Go to the develop module
  2. Select the photos in the camera roll.
  3. Hold down the Ctrl key and click on the Sync button. He turns to auto sync.
  4. Now, whatever you do develop apply to all photos.
  5. Click on auto sync once more to turn off autosynching.

  Method 2:

  1. The display of the grid of Goto.
  2. Select the photos.
  3. Press Ctrl + U.

• Several areas of the group a vcenter

  Hello

  I have a vcenter cluster. The vcenter is joined to A domain and has been added as an authentication source the domain B AD.

  These two areas administrators can connect properly.

  We have 2 servers connection and 2 composer servers that are joined to A domain.

  Currently we have swimming pools on the field one that works very well.

  Trust between domain A and B is not possible.

  So what do we do to create new pools of domain B using the same cluster of vcenter?

  Thank you

  Hello

  That's what we have here! You should ensure that your server composer (if you are using one) also has a database in the new domain too. (We use SQL Express on the server of the composer himself).

  Just point the new servers for connection of field to the existing vCenter VDI pod with the role/access correct with a service account on the origin domain.

  Happy to help you further if you need!

• [After Effects] How to use "Convert Vertex Tool" for several vertex at the same time?

  Hey guys,.

  I used the "Convert Vertex Tool" to create a curve on a step of stairs and by mistake it curve all the point of my staircase which is what I wanted to do but point by point. I didn't know it was possible to point (s) at the same time.

  And now I keep it again. I want to convert all the points as a curve at the same time.

  If someone has the magic shortcut, please let me know.

  See you soon.

  

  It's all using the right tools.

  1. Select the layer with the path
  2. Select the tool pen (g)
  3. Press and hold Ctrl/Cmnd and place the cursor on any part of the path to select - you will see a solid filled small arrow
  4. Release the Ctrl/Cmnd key and move the path tool, so you can drag a selection around the verticies
  5. Hold Down the Ctrl/Cmnd key to reveal an arrow small white selection
  6. Drag your selected verticies
  7. Release the Ctrl/Cmnd key and press the Alt/Option key to reveal the convert vertex tool
  8. Click on any vertex to change linear to Bezier or vice versa

  This allows you to convert all the selected vertices. You can't click and drag, but you can convert it to a symmetrical set of Bezier curves.

• Several areas in the Horizon of VMware View AD

  Hi guys, I want to test creating Pools with 2 Active Directory domains. I have set up my environment as follows:

  
  

  Domain A

  
  

  1. connecting to the server

  Server 2-composer

  3-Security Server

  4 - vCenter Server

  
  

  Domain B

  1. connecting to the server

  2. created a separate account to View Composer

  For now seen Horizon 5.3.2 is fully functional on the field. But I need your help deployment pool using domain B. After you have configured the connection Server (joined to Domain B), I tried to add domain B by using view composer account by logging in to view Admin(Domain A) > Edit vCenter Server > change display composer settings > check server information (under Domain) but I'm 'Bad domain name.

  
  

  You guys please help or send me a link of approval one way of installation which is required for VMware View, so that I can deploy Pool using domain B.

  
  

  Without creating confidence, I added redirector conditional field B on the field which allow me to add domain B without "Bad domain name" pop up. But I don't know what to do next. Anyone can guide me please.

  
  

  Concerning

  Hello

  I've done below the configuration to create 2 different pools where VM is joined to 2 different domains.

  I have Domain A and domain B, having 2 confidence way configured by the AD team.

  I sent 3 win 2 k 8 Server and added to the field.-a. On a single server, I installed vCenter & composer on one server I installed the login server & the other I did the Server fall back to the existing connection server.

  In connect to server, I added vCenter & composer. I have 2 different users who have domain join rights in Domain A and domain B.

  Domain-A\abcUser

  Domain-B\xyzUser

  I added above 2 users in the view composer under domain settings. PFA.

  When creating a pool, in the comments tab customization for users of domain-A, I chose identifier of domain-A\abcUser machine Domain-A and the AD container, which is present in Domina-A place machines.

  for domain B user created another pool, and tab customization of comments, I chose domain-B\xyzuser and the AD container that belongs to the domain B to place machines.

  If you want to add a different machines, you must not deploy a connection/replica server in each domain. Just add the ID domain user under domain composer view tab and choose the right ID when creating the pool.

• Can I use Management Agent of dbconsole to upload to the grid control?

  Maybe a strange question, but I can't find an answer in the documentation.
  
  I have a 10.2.0.4 normal Oracle Home, and in the past, I used dbconsole at Oracle. Now, I have installed Grid Control.
  
  Now my question is: do I really install another agent, or can I use the existing agent (which has been used by dbconsole) to download the who to control Grid?
  
  Thank you
  
  Jürgen

  If dbconsole is no longer needed, you can disable it and remove its repository in the local database. Monotherapy with grid control is a weight quite a bit lighter than dbconsole/agent alongside a database.

• How to uninstall you CC edge? All other programs CC, I took off, but Edge will not uninstall? I will continue to use Adobe CS6, but now I can't use it until all programs CC are off the computer. I use a desktop PC with Windows 8.1

  1 desktop PC

  2 Windows 8.1

  3 adobe CS6

  4. I tried CC programs

  5. no isolated, all the other programs CC

  6 edge CC will NOT uninstall

  7 adobe CS6 programs will not work!

  1 cc programs do not prevent cs6 work programmes.

  2. to uninstall a program that the uninstaller does not work, reinstall the program to restore the uninstall program.

• Cloning of the areas of the UCS

  All best practice how to clone areas UCS? I have install 5 areas of UCS, with of course field of specific IP addresses, resource pools?

  XML Backup and then change in the editor is rather inconvenient?

  See the configuration is a more appropriate way

  Any suggestions are welcome

  Walter.

  Hi Walter,

  My favorite way to "clone" areas is to make a backup of my domain name 'gold' - and uncheck "keep identities."    In this way, then of the import, all ID references are the 'name' pool, but not the ID explicit.

  Then the work necessary for individual areas are limitted to:

  -Fill the pool of ExtMgmt

  -Create blocks of ID, based on 'Field ID' and other local best practices.   [Made easier with PowerTool]

  HTH,

  -Jeff

• A field to retrieve e-mail address several other areas

  I have a form where he asks the user to different places for their e-mail address. 6 to be exact. This form is intended to get their email address with a series of different questions and answers. However, the e-mail address must eventually end up in a field. So if the user enters their email address in any field 1-6, he ends up in field 7. The user may enter their email address in several areas, but the first failure of an entered e-mail address entry, ends up in field 7. I tried a multitude of different snipets code, but nothing seems to work. It was the last code I tried to use, put in each text field in a mouse to the top of the trigger.

  the value of power reactive

  var a = this.getField("501");

  var two = this.getField("502");

  three var = this.getField("503");

  var 4 = this.getField("504");

  five var = this.getField("505");

  six var = this.getField("506");

  seven var = this.getField("507");

  This function which checks if the destination field is empty and if so popluates it.

  function checkAndPopulate (orig, populate) {}

  if(Populate.value==''||) Populate.Value == null) {Populate.Value = orig. Value}

  }

  Copy the value from one to two, three and four

  checkAndPopulate (one, two);

  checkAndPopulate (one, three);

  checkAndPopulate (one, oven);

  checkAndPopulate (one, five);

  checkAndPopulate (one, six);

  checkAndPopulate (one, seven);

  Delete all these scripts you added and instead add it the calculation script customized to the target field:

  var fields = ["501", "502", "503", "504", "505", "506", "507"];
  event.value = "";
  for (var i in fields) {
      if (this.getField(fields[i]).valueAsString!="") {
           event.value = this.getField(fields[i]).valueAsString;
           break;
       }
  }
  

• Several areas in BPEL - very urgent

  All,
  
  Version: 10.1.3.4
  
  I am in a project that integrates 3rd party application to Oracle applications. Our client has 2 applications 11.5.10.2 oracle and 12.0.4.
  Our requirement is that invoice created in one of the oracle applications to be sent to the application of the 3rd part.
  We use DBAdapter in BPEL to extract the invoice data and write it as an XML doc and send the same to the 3rd party. When configuring DBAdapter, he expects to give us the IP address and other information related to the Oracle application. The challenge here is, if I configure the adapter 11.5.10.2, during execution, I can't change the settings like IP address, the user name and the pwd.
  In this scenario, what would be the ideal solution for this?
  
  1 can I create two separate BPEL process to deal with this case?
  2 - is the ideal scenario for several areas, so that 1 domain I have keep 11.5.10.2 and in the other, I keep 12.0.4?
  
  Also I would like to know on what circumstances gets created several areas?
  
  Pls let me know your valuable contributions
  
  Thank you
  
  Sen.
  
  Published by: Sen2008 on March 3, 2009 05:54
  
  Published by: Sen2008 on March 3, 2009 05:57

  You can use BPEL in the same way as BSE. So, in this case, you will have 3 BPEL process. 1 to manage the process of billing and 2 more to manage the connections in your environments of 2 different e-Business suite.

  It seems strange that the customer does not want to use the BSE because that's what some recommended to use ESB to manage service endpoints.

  I would not have too get hung up areas for this use case, it is not necessary. A domain is really used to manage environments with the installation of a. I've not seen a use case where you need several areas for a production environment.

  see you soon
  James

• publish on several areas

  I have a client who has several areas and the desire to publish a site to each of them.  How do I do that in business catalyst?

  Hello

  You can use a primary domain for the site and use it for publication.

  Once the site published and pushed live, go to the domain settings and add other areas.

  Useful link:

  RM http://www.bcgurus.com/blog/Hosting-multiple-websites-on-a-single-Business-Catalyst-Platfo

  Thank you

  Sanjit

• How to get rid of unwanted emails addresses that are not in your contacts list?

  additional e-mail addresses come when you go to find an e-mail address. they are under the letters of the alphabet. my pc had a bad virus and the pc

  technician could not solve the problem on the addresses of unwanted emails.  can you help me please?

  Then you must ask the people at Yahoo.
   
  Yahoo support
  http://help.Yahoo.com/l/us/Yahoo/helpcentral/ 

• Problem with Council box using VMWare-KVM

  I asked this question in the player forum of work stations, but there doesn't seem to be anyone there know about VMWare-KVM, so I hope for more luck here.

  Re: VMWare Workstation 12.1 player when I start a virtual machine using VMWare-KVM I am constantly presented with the message box "press pause to switch between virtual machines and the host - show no suspicion again." I tried to check "do not show again suspicion" but this has no effect. I tried the deselection of VMWare-KVM - preferences. Once again no effect. I imagine that there is a line that I can add a...\roaming\vmware\preferences.ini which will disable it. Does anyone know what would be the format for this?

  Thanks PBreeze

  Hello

  Welcome to community work station!

  I'm sorry. I think it's a bug in vmware-kvm on Windows 7. I can reproduce the problem on Windows 7 with 12.1.0 Workstation. But it works well on Windows 8.1.

  Temporary workaround configures it in the preferences file you mentioned. Add below line to % APPDATA%\VMware\preferences.ini:

  hint.vmkvm.usageHint = "FALSE"
  

  I'll report a bug of product for it. Thank you for bringing This problem to us!

  Kind regards

  Shawn

• SOA 11 g - schema for several areas

  Hello
  
  While creating a domain SOA, we create the SOAINFRA and other patterns. If we are to create several areas (in the same facility/machine) we need to create several PATTERNS? Or in other words a set of patterns is a domain. So if we create soa_domain_1 and soa_domain_2 then we create patterns SOAINFRA_1 and SOAINFRA_2 to soa_domain_1 and soa_domain_2 respectively.
  
  Thank you
  Sanjay

  Hello Sanjay

  There must be one to one mapping between the schema and the domain created by RCU. A single schema must belong to one and only one domain.

  If you want to create two areas you will need to run twice the RCUS. If you create the same DB schema then the prefix must be different in the case otherwise you can create the schema with the same prefix (in different databases) for different areas.

  Kind regards
  Anuj

• Wat is the use of ports, that those who are used to EMconsole

  Hi all,.
  
  Could someone tell me please
  1. the use of the ports used for the dbconsole officer, rmi and jms?
  2. If I block these ports can I use dbconsole?
  3. What are all the ports used for the database as listener http dbconsole, dbconsole agent etc, and use of these.
  
  Thank you and best regards,
  Sagar Maram

  You need to read the docs she...

  JMS?

  Here you go

  http://download.Oracle.com/docs/CD/B14099_19/Web.1012/b14012/JMS.htm

  RMI?

  http://download.Oracle.com/docs/CD/B14099_19/Web.1012/b14012/ormi.htm#JISVC611