Several areas of the group a vcenter

Similar Questions

• GETVPN and regeneration of the keys when several members of the Group leave at the same time

  He did not specify how the key servers respond when several members of the group start simultaneously. For example, if 3 members leave the same group, made the key manager sends three keys (KEK, TEK) and only the last will be available for future connections? Or the key manager optimizes the regeneration of the keys and sends only a single key?

  Thank you

  Stone,

  On himself, he is not uncertain. You can retrieve the session memory keys (not impossible but difficult).

  I guess what you are looking for is a red button to clear the SAs on all devices?

  In this case:

  http://www.Cisco.com/en/us/docs/iOS-XML/iOS/sec_conn_getvpn/configuration/15-2mt/sec-get-VPN.html#GUID-6267F36C-094F-483F-A1CA-735D39484364

  Specifically "clear members ks gdoi crypto now."

  There is a particular risk that you thought?

  M.

• Use management/KVM ip addresses several areas of the UCS

  Hello

  We organize several servers UCS blades in two areas of the UCS. In all areas, we configured an IP ext-mgmt pool to join the MMIC of the blades. As our two infrastructure is developing, I was wondering if we could use the IP addresses that we use for pools in both areas?

  I read the guide management (http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/G...) and as far as I understand it, if we use the inband IPv4 addresses these addresses are used between the fabric interconnects and server blades?

  So I could not addressed the KVM from "outside" so through the UCS Manager (equipment-> frame-> Server-> Actions "Console KVM"). Am I wrong? I did a few tests well failed to start KVM without our current configuration (IP ext-mgmt pool provides extrabande for each unique server IPv4 addresses).

  Thanks in advance!

  Concerning

  Martin

  Hi Martin

  I think that's not possible! as soon as you insert a blade, it will have an IP address from the ext-mgmt pool and assigns it to the MMIC! That's why this IP address is assigned to a chassis / slot, which means that if you move the blade to another location, most likely, it will get another address. It is a challenge, if you want a DNS entry for a blade / KVM access.

  Walter.

• Several areas in the Horizon of VMware View AD

  Hi guys, I want to test creating Pools with 2 Active Directory domains. I have set up my environment as follows:

  
  

  Domain A

  
  

  1. connecting to the server

  Server 2-composer

  3-Security Server

  4 - vCenter Server

  
  

  Domain B

  1. connecting to the server

  2. created a separate account to View Composer

  For now seen Horizon 5.3.2 is fully functional on the field. But I need your help deployment pool using domain B. After you have configured the connection Server (joined to Domain B), I tried to add domain B by using view composer account by logging in to view Admin(Domain A) > Edit vCenter Server > change display composer settings > check server information (under Domain) but I'm 'Bad domain name.

  
  

  You guys please help or send me a link of approval one way of installation which is required for VMware View, so that I can deploy Pool using domain B.

  
  

  Without creating confidence, I added redirector conditional field B on the field which allow me to add domain B without "Bad domain name" pop up. But I don't know what to do next. Anyone can guide me please.

  
  

  Concerning

  Hello

  I've done below the configuration to create 2 different pools where VM is joined to 2 different domains.

  I have Domain A and domain B, having 2 confidence way configured by the AD team.

  I sent 3 win 2 k 8 Server and added to the field.-a. On a single server, I installed vCenter & composer on one server I installed the login server & the other I did the Server fall back to the existing connection server.

  In connect to server, I added vCenter & composer. I have 2 different users who have domain join rights in Domain A and domain B.

  Domain-A\abcUser

  Domain-B\xyzUser

  I added above 2 users in the view composer under domain settings. PFA.

  When creating a pool, in the comments tab customization for users of domain-A, I chose identifier of domain-A\abcUser machine Domain-A and the AD container, which is present in Domina-A place machines.

  for domain B user created another pool, and tab customization of comments, I chose domain-B\xyzuser and the AD container that belongs to the domain B to place machines.

  If you want to add a different machines, you must not deploy a connection/replica server in each domain. Just add the ID domain user under domain composer view tab and choose the right ID when creating the pool.

• publish on several areas

  I have a client who has several areas and the desire to publish a site to each of them.  How do I do that in business catalyst?

  Hello

  You can use a primary domain for the site and use it for publication.

  Once the site published and pushed live, go to the domain settings and add other areas.

  Useful link:

  RM http://www.bcgurus.com/blog/Hosting-multiple-websites-on-a-single-Business-Catalyst-Platfo

  Thank you

  Sanjit

• SOA 11 g - schema for several areas

  Hello
  
  While creating a domain SOA, we create the SOAINFRA and other patterns. If we are to create several areas (in the same facility/machine) we need to create several PATTERNS? Or in other words a set of patterns is a domain. So if we create soa_domain_1 and soa_domain_2 then we create patterns SOAINFRA_1 and SOAINFRA_2 to soa_domain_1 and soa_domain_2 respectively.
  
  Thank you
  Sanjay

  Hello Sanjay

  There must be one to one mapping between the schema and the domain created by RCU. A single schema must belong to one and only one domain.

  If you want to create two areas you will need to run twice the RCUS. If you create the same DB schema then the prefix must be different in the case otherwise you can create the schema with the same prefix (in different databases) for different areas.

  Kind regards
  Anuj

• Get members of the group with the Java API in LiveCycle

  I work with the Java API in LiveCycle (LiveCycle 8.2) and I am looking

  
  

  an example of how read the members of a group.

  I am able to get a group (Type GroupImpl) using the PrincipalSearchFilter.

  
  But how do I get the members of this group. I checked the
  DirectoryManagerServiceClient and classes of different search filters
  without success?

  As a solution, I can retrieve all users of my application area and
  check their membership to see if they are in the group concerned. But this
  is a dirty hack, I really don't want to use.

  Any ideas?

  Hello!

  I know you mentioned that you were watching in this without success, but it should work really.

  First make a GroupMemebershipSearchFilter, defining the groupoid be the ID of the group itself.  Using the DirectoryManagerServiceClient you can then call findGroupMembers using the searchFilter that will return a list of, as follows:

  DirectoryManager DirectoryManagerServiceClient = new DirectoryManagerServiceClient (serviceConnection.getFactory ());

  List userList = new ArrayList ();

  Try
  {
  userList = directoryManager.findGroupMembers (searchFilter);
  }
  catch (System.Exception e)
  {

  Animals mistake
  }

  return userList;

• Groups of contacts: not all recipients are in the mail

  Until recently, I've only used my laptop for music and photos, and I'm a new user for mail and contacts.

  I created a group with several contacts. When I want to use it to send an email, however, is only a fraction of the list (the one with a 6 and another with 18) as recipients of mail. I made sure all the contacts have a valid mail.

  All solutions?

  Thank you

  P

  Hello Freesias,

  Thank you for using communities Support from Apple!

  If I understand your question only when addressing a group email, only some of the contact group is filling by e-mail while others do not.

  Also, you did a good job by checking that all the contacts have a valid email address. In this situation, I would recommend controls the placement of the e-mail address in Contacts. It may be possible that the e-mail address is not entered in a field of e-mail, but rather a field phone for example.

  The following link includes an image that shows three different phone numbers to contact Jeanne Fox with a fourth field below that has the word 'phone' is gray letters. This indicates that this field is used for a telephone number.

  Under this field phone, you see a gray solid line. This line separates the space to add phone numbers and email addresses. As you can see from the picture, the first field is followed [email protected] of another empty field that has the gray word "Email".

  

  Change contact information - Contacts help

  To resolve your situation, I suggest after the steps in the following article to see if my theory may be correct.

  1. Select a contact, then click on change

  2. Add a field: click on the Add button, then choose send

  3. a new e-mail field must open in the domain of the Email I mentioned earlier

  If the new Email field opens to another area that is the current e-mail address, type the e-mail address of the contact in this new field, and then delete if on the ground, he was already in.

  If the new Email field opens in the same area, between the two solid gray lines, please let us know.

  See you soon!

• How can deselect an option button in the group 'Size', using Applescript to print several pages at 100%

  I hit a serious problem to update my application to use Adobe Acrobat DC 2015.

  I try to use the graphical interface to print multi-page documents but do not uncheck an option "Shrink oversized pages"button, checking a different 'Real size'button, in the same group. The two buttons are checked, and printing is by default the Junk button, print several pages on a sheet, instead of 100%.

  Anyone know of a different way to uncheck that darn button, or better yet, how to direct print the document. I can't find any online documentation of printing direct formatting.

  I need to print all pages, to 100%, with a particular printer, the "theLargePagePrinter". In addition, we use Pitstop Pro 13.

  TIA,

  Concerning

  Santa

  say application "Adobe Acrobat" to Activate

  the shell script ("sleep 0.2")

  say application 'System events' to say process "AdobeAcrobat.

  the shell script ("sleep 0.2")

  try

  with keys 'p' command down

  end try

  the shell script ("sleep 0.2")

  try

  click 1 of the Group pop up button 1 of the 'Print' window

  end try

  the value x to 0

  Repeat until there are menu 1 of popup button 1 of the Group 1 of window 'print '.

  the shell script ('sleep 0.1')

  the value x to x + 1

  if x ≥ 20 then exit repeat # wait 2 seconds

  end Repeat

  the shell script ("sleep 0.2")

  try

  click menu item (my theLargePagePrinter) of 1 of 1 of Group pop up button menu 1 of the 'Print' window

  end try

  the shell script ("sleep 0.2")

  try

  click on radio button "All" of the Group 2 of window 'print '.

  end try

  try

  click on CheckBox 'Size' of the Group 3 of window 'print '.

  end try

  the shell script ("sleep 0.2")

  try

  try

  say 1

  say (there are (box option "Shrink oversized pages" of the Group 3 of window ' print')) as text -< 'true'

  end try

  try

  2 say

  say application 'System events' to display the dialog box ()get each attribute of option button of the Group 3 of 3 window 'Print') as text -< fails

  say 3

  end try

  Repeat while value of radio button "Shrink oversized pages" of the Group 3 of window 'Print' is 1

  the shell script ("sleep 0.2")

  click on radio button 'Real size' of the Group 3 of the window 'Print '.

  # the value value of radio button "Shrink oversized pages" of the Group 3 of window 'Print' to 0 -< cannot set the value

  the shell script ("sleep 0.2")

  end repeat -< maintains a loop

  end try

  the shell script ("sleep 0.2")

  try

  click on radio button 'Real size' of the Group 3 of the window 'Print '.

  end try

  -more than < code >

  tell the end

  tell the end

  In the Acrobat SDK kit, locate in the JavaScript section and at the IAC-> section AppleScript to learn how to run a JavaScript via AppleScript. You have the Acrobat SDK kit?

• How can I put several addressed in a 'group' that I can send using the group name?

  I have an address book and you can send an email to several at once by adding each in hand and the cc or BCC fields. As I often do, I need to 'collect' in a group, so I can use the name of the group to send to several people.

  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Create_Mailing_List

• I upgraded to firefox 3.6 beta 3 for firefox 12 and now, none of the sites Spruz I own or am administrator on just shows the Member of the groups of pictures are huge

  I upgraded to firefox 3.6 beta 3 for firefox 12 and now, no sites Spruz I own or am admin on watch just the Member groups, photos and videos are huge...

  My site about Spruz shows members of the groups, photos and great videos... Instead of members photos taking place a 1 1/2 X 4 space (3 rows) in the upper left corner of my site, they are falling is greater than the length of the first page in single file... Groups and videos take place amid all the first page...

  As I have something that is compatible with the site that I admit needs to be corrected... It appears that way on all Spruz sites I belong to...

  I can get the photos to display in 3 columns, if I do this:

  Orange Firefox button or classic menu Tools > Options > content

  In the section fonts and colors, click on the Advanced... button.

  Change Minimum font size None and OK out of Options.

  But most people won't do that. I prefer a minimum of at least 10 font size.

  Then... How to fix it. How the thumbnails are size, is that they 10em with a font size of basis of 5px. If the minimum size is set to 10px, double images in height and width.

  It would be more logical if the base in your style sheet font size was larger. Can change you it? If so, try to double the font size and to halve the size of the relative picture:

  In http://languagesofourancestors.spruz.com/dhtml/corestyle/xstyle.css

  
  /*All Cards Small*/
  .SUI-UserPic.small, .SUI-ImageCard.small, .SUI-VideoCard.small { font-size: 10px;}
  

  
  /* User Pics */
  (4 lines down)
  .SUI-UserPic .SUI-CardImage { display: block; width: 5em; height: 5em; overflow: hidden; border: 1px solid #aaa; border-radius: 2px; -moz-border-radius: 2px; -webkit-border-radius: 2px;}
  .SUI-UserPic .SUI-CardImage img { width: 5em; min-height: 5em; border: 0 none;}
  .SUI-UserPic .PopInfo {line-height: normal; display: none; width: 140px; position: absolute; z-index: 2; top: 4em; left: 0; margin: 0 auto;}
  

  I think that will be more widely compatible. There may be some details that I missed, but hope this helps.

  I don't know why the minimum font size has not been applied as well in Firefox 3.6, but I suspect that this is the new normal.

• Horizontal size of the taskbar button is too small, as if there are several buttons, he the overcrowding.

  I downloaded a program called Styler which changes the appearance to look like Windows 7 or Royal themes. It worked fine for the first days, until that day when my laptop could not start after hibernation, so I hard-rebooted, and the horizontal size of the taskbar button is too small. I tried to restart, change the appearance back, locking/unlocking/resizing of components of taskbar. I wish I could send a screenshot. Yes, I have these vertical bars displayed and all, and no, they do not change it. I use as a separate program called AlienGUIse Alienware, which has not had a problem in 2 years, I got it, and it didn't fix it either.

  Why I say that it is as if there are many buttons clutter is the "group similar taskbar buttons" function. I figured out how to put the picture of the problem in my profile to do this, click on it.

  Someone has replied

  a system restore point worked!

• Kensington Trackballworks sometimes has several icons in the tray system, exposed behavior, it is as if one or more mouse buttons are kept pressed when they are in fact not to be affected

  Original title: Kensington Trackballworks sometimes has several icons in the system tray

  Every so often from the start (no apparent reason) multiple Kensington TrackallWorks icons appear in the system tray and the unit behaves erratically until all but one of them are closed. Behavior exhibited, it is as if one or more mouse buttons are kept pressed when they are in fact not to be affected. I use a Kensington Expert Mouse and TrackballWorks 1.04 K64325 model number. Uninstall and reinstall the driver didn't help, or does uninstalling and reinstalling Windows.

  I checked with MSCONFIG, Autoruns and even when several copies work they show only one entry for the application. Any ideas /.

  Hello
   
  Since you've already tried to uninstall and reinstall the driver/windows, this could be a hardware problem. Please try to contact the manufacturer of the mouse for assistance on this issue.

  http://us.Kensington.com/HTML/1458.html (you can select the Technical Support of this link and then select Product Knowledge Base)
  http://us.Kensington.com/HTML/1445.html

• Error NoPermission when the vCenter access is provided via the Group

  Hi all

  I installed the new vcenter 5.1.0 1123961 on 2012 OS Server (the server is joined to AD).

  If we give access to the user directly, they can log in via vSphere vCenter / Webclient with numbers.

  If we give access to the AD Group, and make user group member, admin users get error NoPermission.

  We have the administrator authority give the Group on the vCenter server, do not know what is the cause of the problem.

  
  VCenter server log.

  Vim. SessionManager.login: vim.fault.NoPermission:

  -> Result:

  -> (vim.fault.NoPermission) {}

  -> dynamicType = < unset >

  -> faultCause = (vmodl. NULL in MethodFault),

  -> subject = ' vim. File: Group-d1',.

  -> privilegeId = "System.View."

  -> msg = ""

  ->}

  -> Args:

  ->

  Tech VM ware asked to install 2.0 SSO, it is know issue in vcenter 5.1 AU

• What are the ways to vCenter 5.1 5.0?

  I have vCenter 5.0 with joint hosts, most of them is ESX 4.0, two of them is a 5.0 ESXi. I would like to upgrade vCenter to 5.1.

  What is the best and least disruptive to do? I am considering an upgrade in place against the construction of a new 5.1 vcenter and then migrate all hosts in

  This vCenter. What is the best and least disruptive to do? Both are considered as valid ways to achieve the same goal?

  Thank you

  Another option that you have, and the way I just made, must continue to operate your vCenter 5.0. Start the installation for the SSO to the ISO 5.1 and get that working first. It is not interact with 5.0, so you should not spoil anything. Once you have that working, you can install the WebClient service too and also get that works - it interacts with SSO, then you can experiment and make sure it's all happy. Once all this is done, take your time, and then do the rest of the upgrade to vCenter 5.1.

  I guess ours was a fairly simple installation - we run all services on the same Windows Server vcenter, and we were already in SQL 2008, so it was not too serious - it was with 13 ESXi5.0 9 ESXi4.1 hosts and about 180 guests.

  The WebClient/SSO Service took me a few hours to do in February, and the last part of the upgrade to vCenter took a few hours of time to do last week. Of course, you can add another + 2 hours for installation of syslog, dumper, autodeploy, vShield and other pieces that you have.

  My biggest fear was of all the horror stories I had heard about the SSO installation, that is why I am and out of the way first.

  Of course, I'm always build and test my image ISO ESXi5.1 of installation etc.

  G