Use OEM Windows 7 Pro in virtual computer; Enterprise of Windows 8.1 in the physical Machine

Similar Questions

• Cannot start Windows 7 after the conversion of the physical machine

  Hello

  I converted my windows 7 64 bit running physical machine to the virtual machine using converter 5.0. I am running VMWare Workstation 8.0. My physical machine hid the 100 MB boot partition and 90 GB main partition. During the conversion, I don't have an option to select a hidden partition, nor did I want in my virtual machine. Conversion failed with the following message (planned):

  Unable to find the system volume, reconfiguration is not possible.

  Then, I started the virtual machine using the Windows DVD and selected the option "repair". Once I arrived, I used diskpart to make my active primary partition and then followed the steps in this KB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1037507 to fix everything including BCD. Once this was done, I used converted to reconfigure the virtual computer, and this time he succeeded. Everything was good and as expected up to that point. Now, when I start the VM, I get by BIOS init and then I get a black screen - no messages at all and he vm it is here without doing anything. I tried to fix it again and everything seems good (checked all the information using diskpart, bootrec and bcdedit so that automated repair) - everything seems to be in order, but the black screen is all I see when I try to start.

  Any help to guide me to this point is very popular figure.

  Thank you

  Andrey

  Disk2vhd create a vhd file
  Starwinds V2V converter converts the virtual hard disk into a vmdk
  This vmdk is assigned to a new virtual machine
  first boot the virtual machine goes into a Windows 7 drivers restore CD you patch

  my notes:http://sanbarrow.com/p2v2008r2.html

• Cannot start the physical machine converted to a virtual machine under ESXi 4.0

  Hi all

  I have 2 has with the material below

  Dell optiplex 755 2.4 Qcore 4 GB of RAM and 160 GB of HARD drive

  A performer with ESXi 4.0 other runs with Windows 2003.

  I tried to convert physical machine with "Vmware Vcenter converter Stand alone" 4.0.1 build 161434

  I used the tool on the source machine and by another machine on the network.

  The two process converts the physical machine to a virtual machine successfully without any errors.

  After conversion, the virtual machine cannot start, and shows only a small slider that is not flashing too.

  

  The physical machine have a single partition of 160 GB

  The space currently used on the physical machine is 26 GB.

  I reduced the size of the HARD drive to virtual computer with fix / light available in 40 GB.

  point to make here is that the ESX have only 160 GB HDD, so he will not be able to copy all 160 GB because of which I am reducing the 40 GB HARD drive

  I converted a few other physical machines with 40 GB HARD drive and they work well after the conversion.

  Any sugessions would be greatly appreciated.

  Thanks in advance

  Hi Sunil,

  Let me know the drive selected in the custom option controller.

  Thank you

  Krishna

• How the physical machine can communicate with the virtual machines as well as the internet should work on a virtual machine

  Hi team,

  I ask that you forgive for asking a silly question without doing a free search.

  I'm using VMware workstation 6.5. I am able to communicate with both machines by selecting 'only option of home. "

  Is there a way by which the physical machine can communicate with the virtual machines.

  At the same time through the VMS, is it possible to access the Internet from the physical amchine.

  Help, please.

  Concerning

  Sriapti

  When you use a bridged vNIC the customer acts as any other host, so that you can access is by his IP (or name if a DNS configuration exists as you acceding to any other host.) What tools you can use depends on the guest operating system and the software available.

  I assume you mean access deskopt. Then you can use RDP (Windows Terminal services) or VNC (tight/tiny).

  For Linux, you can use this last or all the flavors of SSH. In the case of Linux, I use VNC through SSH tunnel. You can also tunnel X through SSH, so if you have an X server on another host (such as the Hummingbird for Windows), you can open your own office remotely there.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• Can I use folder Windows xp mode for the office and home computer?

  I installed windows xp mode in my office machine n it works perfectly, I can use the same windows xp mode file n use in my machine at home.

  Both the machine home & office machine that I use is windows 7 pro.

  Hello

  To add some excellent advice from Andre:

  (XP mode requires professional, Ultimate or Enterprise).

  Get all the benefits of Windows 7 and continue to take advantage of your investments
  in the old business and productivity programs that require a Windows PC
  WPA Note: Windows XP Mode requires a download.
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

  Windows XP mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode is supported through Technet

  TechNet - Forums - Windows 7 virtualization
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Visitor using PC (Windows 10) redirects to the page instead of home office phone

  I have a site to a page with a page desk and telephone. A visitor, no matter what browser you use from their desktop, is redirected to the homepage of phone. Is there anything in the site that I can fix the problem? Or maybe something on this particular PC, which I do not have much information other than Windows 10, using a display high ground. Any thoughts? TIA

  Hi Jeffrey,.

  The visitor is to work on a touch screen desktop computer.

  If so, try disabling the touch screen and check.

  Kind regards

  Akshay

• Is it possible I can get the virtual computer connectivity after restart to connect to the local network in the host operating system?

  Hi all

  For some reason, I have to disable and then enable the LAN connection in the host operating system. If some virtual machines are running during this time, connectivity all VMs for out-of-world are lost, they cannot connect to the host even more (by running the ping command). I tried a few methods to retrieve the connectivity, but all have failed, for example,

  1. reboot the virtual computer

  2. restart VMware Workstation

  3. restart the corresponding system services in the host operating system

  The only way I can retrieve all is to restart the host operating system itself.

  Yes, is there short any path, I can retrieve the connectivity of these virtual machines?

  Thanks in advance.

  Yark

  yarkwang wrote:

  I use a Broadcom NetLink (TM) Gigabit Ethernet NIC, shows the date of the pilot 2006-5-15, but it works well, I think.

  Try installing a newer driver.  According to the site, you should be able to find a driver dated 2008 or 2007 (depending on which exact model of NetLink card you have):

  - http://www.broadcom.com/support/ethernet_nic/downloaddrivers.php

  1 came out of safe guard 360

  Sometimes out of some firewall programs is not enough (they keep still themselves installed in the network of the host stack, even if they are 'closed').  You may need to uninstall to make sure that it is not interfere.  (Search the forums for support for your firewall software see if anyone else is having problems with vmware and 360 safe guard).

• VMworkstation used for the copy of the physical machines

  Hi all

  I had the problem with some software legacy on old hardware, and was plesently surprised when I managed the movement of any physical machine to the ESX virtual machine.

  I tested it on VMware-workstation - 6.5.1 - 126130.exe

  Everything went a lot when I wanted to test, clone, windows 2003 Server (Local host) object.

  When I tried to clone SUN solaris machine using point offered to clone through the IP address of the host, I failed.

  Even on SUN Solaris 8, SUN Solaris 10, Suse 10.1

  I am currently downolading VMWare workstation for Linux, but the question remains, can I clone physical Linux machine with VMworkstation, using files & gt; import-export option and provide the IP address of the remote to be cloned?

  Thank you

  Workstation has a built-in converter that can handle NT 4 - 2 k 3 - perhaps Vista.

  Solaris or Linux or BSD cannot be imported with the embedded version.

  For P2V Solaris or BSD, you need to import manually.

  To import the distributions RedHat and Suse and Ubuntu - try Converter 4 beta

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• ESX does support the use of Update Manager to update a virtual computer running a guest o/s of the Server 2008 R2?

  I can't get this to work.

  Seems to be the o/s is supported as a guest o/s on ESX 4 Update 1 to I should be able to use VMware Update Manager for the patch.

  Someone at - it get this working?

  Notes for version 2008 R2 is not supported for scanning and remediation

  Analysis of the Virtual Machine and sanitation

  • Windows XP Professional 32-bit, SP2 required

  • Windows XP Professional 64-bit

  • Windows 2003 Datacenter

  • Windows 2000 Server, Service Pack 4 with the Update Rollup 1

  • Windows 2000 Professional SP4 required

  • Windows Server 2003, SP1 required

  • Windows Server 2003 R2

  • Windows Server 2003 x 64

  • Windows Server 2003 32-bit and 64-bit Standard/Web

  • Windows Server 2008

  • Windows Vista Business

  • Windows Vista Business

  • Windows Vista Business (x 64)

  • Windows Vista Enterprise (x 64)

  http://www.VMware.com/support/vSphere4/doc/vsp_vum_40u1_rel_notes.html

• Active use of memory for an empty virtual computer

  Hello

  I just deployed a VM and set the client memory to be 10 GB.

  However, I have not yet installed any OS on this virtual machine.

  I just turned on the virtual machine and sailed to the tab "resources" of the virtual machine and saw that the active memory is 7.5 GB on the 10 GB.

  I try to understand the reason for this, and as I mentioned earlier that it is bone but it did not always active memory is 7.5 GB.

  So who could use this memory at this point in time. ? (see the attached screenshot)

  No idea why that number?

  Thank you

  

  By design for ESXi 5.0 refer this VMware KB but it feel right for your case (75%).

• I want to just convert a virtual computer model... and I owe the clone to the model?

  can you just convert a VM directly to a model? I'm used to using the windows client, I carefully use the webclient service because VMware forces my hand. I hate it.

  I want just to convert a virtual machine in a model. I don't see this option. I see an option to CLONE to a template, but I don't want a clone. I don't want 2 copies. IT seems that it is perhaps the only option with the web client? Am I missing something? And then to turn back, I copy the model to model or something? At VMware really derailed this much?

  Client Windows worked fine. Customer Web is painful.

  Yes, you can convert a virtual machine to a model using the Web Client. See the attached screen photographed... where is the option for her.

  

• V21 Firefox cannot find the files if file *.htm used "style windows" path slashes to the java scripts (on Unix, hosting with apache)

  Hello. I find a strange behavior of Firefox v21. If the 'windows' path used *.htm file slashes to the java scripts (on Unix, hosting with apache). Firefox says 404, but other browsers (such as Opera, Chrome, IE10) works properly with this.

  You should use slashes in links so that they work properly in Firefox, otherwise Firefox will escape them that 5% C as you can see if you would them hover in the case of a real link (this is obviously not possible in this case).

• Can I use a Windows XP disk for the downgrade?

  We cannot use windows 7

  We cannot use windows 7 due to programs that do not work.  Soon, we will need to buy new computers for our society.  I hear that since we will buy an operating system on your part, we can use any old disk Windows xp in low grade.  True?

  Free Windows XP Mode has been developed for people like you.  Just order new computers with Windows 7 Professional.

• Why used my windows to connect to the internet so that linux and the other computers in the House will be

  I have windows Vista Home Basic

  Two possibilities:

  • Drivers
  • Installation is corrupt

  Try this:
  Verify the integrity of Windows Vista system files

  Then open a command prompt (run as administrator - the selection, not the fact that you are connected as a supposed administrator) and run the following commands ONE at a time, pressing ENTER after each one.

  netsh winsock reset catalog
  ipconfig / renew
  ipconfig/flushdns
  ARP d *.
  nbtstat - RR

  Turn it back on.

  What is the brand and model of the network device?

• Use of PC, had to change my computer and wondered how can I reinstall the creative cloud on the new.

  Hi, I had to change my computer (PC), but can find a way to reinstall creative cloud. Can anyone help? I have a subscription, so I have to pay for it

  Hello

  You can reinstall creative cloud by https://www.adobe.com/creativecloud/desktop-app.html

  Let us know if this helps!