Cannot start Windows 7 after the conversion of the physical machine

Similar Questions

• Cannot start Windows 7 after the update of the system

  I don't speak of Windows 7 RTM, I know is RC forum but I downloaded the RC of microsoft's official website and I can't install it, it reached the "end of installation"(ou quelque chose comme ça) phase and blue screen of death appears, saying "memory dump" and other things. ". That's why I downloaded RTM from a torrent site, I installed it, everything was fine, the aero was not on so I that I should update the video drivers and then I downloaded all the updates possible (via the control panel), then I restarted the pc and now I am not able to load windows , it's blue screen of death! Notice that I can run windows 7 mode safe mode, but when I try to start it in normal mode the blue screen appears. BTW, I have windows xp installed on my pc as well. So, here is my setup:

  AMD 7750 dual-core 2, 7GHz
  4 GB of RAM, 800 Mhz, but the system says 3.25 alone can be used
  ATI 4730 512 MB, btw I have integrated graphics card (ati hd3200, I think), don't know if it's important but...

  Here is the information about the error:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 1026

  More information about the problem:
  BCCode: 116
  BCP1: 871F13D8
  BCP2: 90C204B4
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Files helping to describe the problem:
  F:\Windows\Minidump\080809-15375-01.dmp
  F:\Users\blah\AppData\Local\Temp\WER-22953-0.SysData.XML

  Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  F:\Windows\system32\en-US\erofflps.txt

  Here's the crash dump:

  Debug version of Microsoft Windows (R) 6.11.0001.404 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [F:\Windows\Minidump\080809-14921-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntkrnlpa.exe
  ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
  Windows 7 Kernel Version 7600 MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 7600.16385.x86fre.win7_rtm.090713 - 1255
  Computer name:
  Core = 0 x 82803000 PsLoadedModuleList = 0x8294b810
  The debugging session: 11:50:54.734 Saturday, August 8, 2009 (GMT + 3)
  System Uptime: 0 days 0:00:19.343
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntkrnlpa.exe
  ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ..........
  Loading user symbols
  Loading unloaded module list
  .....

  Pirated Windows 7 allows malware, botnet zero-day ZDNet.com.url

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Compaq Presario SR5130NX: Cannot start Windows Vista after failure - HELP!

  Hello! My building has undergone a complete failure so 4 days ago I used it. Power resumed 3 hours later, but I was not able to log on since.
  
  
  
  
  
  Normally, I turn on my PC, and about 30 seconds later, a window pops up asking you my password. After entering it, the PC come by my office. Now, when I turn on the PC, it brings me to a blue screen with a mouse cursor in the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  When I press F8 during the boot process and choose an option from the window "Advanced Boot Options", I still can't start my computer normally.
  
  
  
  
  
  Here's the "Advanced Boot Options" I tried, after consultation with my brother a little more PC-savvy:
  
  
  
  
  
  1 repair your computer - after I see my black screen that is usual with the words "Microsoft Corporation" under the green bars that scroll from left to right for about 15 seconds, a blue screen appears with the mouse pointer in the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  2 mode safe - while the PC display several files on start up and down, it stops on "Loaded: \windows\system32\drivers\disk.sys" for about 20 seconds, then proceeds to a black screen with the words "Safe Mode" in the 4 corners and the mouse cursor at the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  3 safe mode with network - see "Safe Mode" above.
  
  
  
  
  
  4 safe mode with command prompt - see 'Safe Mode' above.
  
  
  
  
  
  5 last known good Configuration (Advanced) - see "repair your computer" above.
  
  
  
  
  
  6 start Windows normally - see "Repair your computer" above.
  
  
  
  
  
  7 debug mode - see "Repair your computer" above.
  
  
  
  
  
  I downloaded a DVD recovery based on Linux in knopper.net, allowing me to access important files, which I copied from the desktop to an external hard drive (4.1 GB iso file).
  
  
  
  
  
  PC Windows XP of my brother has a recovery disk, but my Windows Vista PC did not come with one. I've seen a few paid versions, but looked resources due to cool weather and free shipping.
  
  
  
  
  
  I can't tell if I have the 23-bit or the 64 bit version of Windows Vista, so I downloaded both versions of an open source sourceforge.NET startup repair, which I burned on 2 DVDs. After you run the startup repair program using two DVD, the diagnostic results have been uploaded online at ubuntu.com for review and technical analysis. Here are the links:
  
  
  
  
  
  http://Paste.Ubuntu.com/16018001/
  
  http://Paste.Ubuntu.com/16019372/
  
  http://Paste.Ubuntu.com/16040380/
  
  
  
  
  
  The last report ended with the words "start managed to fix...".  You can now restart your computer. "But I always encounter a blank screen (black or blue) when I try to log on to my PC.
  
  
  
  
  
  Here are my details of PC, if it is useful:
  
  
  
  
  
  Desktop Compaq Presario SR5130NX
  
  Serial number: [personal information]
  
  Product number: GC667AA
  
  Warranty end date: October 5, 2013 (according to Compaq/HP.com)
  
  
  
  http://support.HP.com/us-en/product/Compaq-Presario-SR5100-desktop-PC-series/3436764
  
  
  
  
  
  Thanks for any help you can provide.

  Hello

  Since you already have KNOPPIX I try Gparted and use it to 'clean up' the score because it will stop in an impure State.

  NTFS

  [1]

  [11]

  NTFS-3 g / important

  GParted will try.

  Also, I would consider the old problem with fat systems, floppy disks etc. which sometimes a copy of sys files from a floppy disk to a hard drive has reactivated a bootable system.

  So, if system files have been damaged, then replace them since a Setup disk.  Because he goes to options, what kind of work.

  https://en.Wikipedia.org/wiki/Windows_Vista_startup_process

  • Windows Boot Manager (Bootmgr.exe)

  • Windows operating system loader (Winload.exe)

  • Recovery of Windows loader (Winresume.exe)

• Cannot reinstall Windows XP after the removal of Windows 8. The installation does not complete.

  I installed win 8 January last on a xp pro machine, which was in surplus. I uninstalled the victory 8 and now impossible to reinstall win xp pro

  The computer is a homemade which ran from win xp pro for several years. I installed win 8 trial knowing that it would take a new installation of XP Pro after the expiration of the 8 victory. I have reset my bios on a cd first and started in the installation cd after installing win xp, it went to boot, and the cd has been removed. a restart was launched and he went into the bios to save install and after the robot below the windows splash logo made 3 passes, he stopped at halfway. After this is is spent in attempts to bppting I noticed that whenever the start stopped he left the Num lock, cap lock, and scroll liux lights were all on on the keyboard. I traded my keyboard with one of my current computer and it always occurres. I started to reload several times now and always the same. No bios settings have helped.

  Hello

  Unplug the machine to see if this allows the machine to reinstall the operating system of any material not needed (such as printers, fax, speakers, USB devices (except keyboard and mouse), Internet connections, etc.).

• Cannot start Windows 7 after installing windows XP

  Original title: unable to load an earlier version of windows.

  I have been using windows 7 on my computer. Now, I installed windows XP but the problem is that windows 7 has been hiding and windows XP will load automatically. I mean that my PC does not give me the option to choose the two windows to use. I have not formatted the windows partition 7. There are, but hide. Please help me.

  Thank you.

  Hello

  Read the following article that may help you resolve this problem. This article is true for Windows 7 and Windows Vista.

  Windows Vista no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/933179

  For more information: Dual Boot between Windows XP and Windows 7

• Cannot install Windows XP after the purchase of disk

  I put the disk for Windows xp, but cannot be installed

  You should really start a new thread on this question of yours.  I'll send a message to the moderator to separate this question from this old thread and create a new one for you.

  In any case, if you have installed vista, xp will not be able to install automatically. It's because you try to downgrade your computer.

  However, if the computer already had xp on the computer, and then you could upgrade to vista automatically.

  You'd have to do is to format the hard disk in the first place, until xp can be reinstalled.

  But there may be another problem for you at this time.

  You see, if you have a computer that has been designed to use vista then xp is maybe not able to work on this computer.   You will have to go place of origin of the computer and see if your machine has hardware drivers that can be used by xp.  In others, you should check if there are drivers xp for your computer model.

  If this is not the case, then it means that your computer cannot start xp, even if you reformat the hard drive and install a new copy of xp on it.

  What is the brand and model of your computer?

• G560 cannot start Windows 7 after onekey recovery

  I got the Lenovo G 560 0679 (2.54 Ghz, 4 GB Ram, DVD, Win 7 64 bit) * do not know the full product code * and created recovery disks. During the process, the system wanted 3 disks. After the second disc, the recovery disks have already been created. It was a little suspect. I tried the recovery disks. Then I have to restart the system. If I start it says that windows could not be started due to a change in hardware or software.

  I will go into an installation disc that has not been included in the box.

  Well below I got the offer to choose between

  Start windows normally

  use the last working configuration

  saving mode

  Save the network mode

  Save the mode prompt

  I also tried to install a Win 7 Home 64 bit edition on the main partition. Subsequently, I installed onekey recovery and tried to restore with the partition of lenovo. It did not work either.

  Can someone help me?

  Thanks for you advice.

  did you already changes on the software?
  Remove if inserted usb devices all.

  any other error instead of "change in hardware or software?
  I don't know if it will help but try to set the bios default settings (when you see the lenovo logo, press f2)

• Start Windows lost after the partitioning of the disk next to Mac!

  Hi, I've lost my windows boot after creating a small new partition in disk utility. Could someone help me pls?

  Can you post the output of the following commands in OSX Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Cannot start my computer after the upgrade to Vista 2. checksum error. cold stops!

  FURIOUS! IS NOT EVEN THE WORD HERE! I only got my sony notebook 1 year.  I accept an update for Windows Vista 2, NOW your laptop!  Files corrupted with Checksum error.  I have not even where begin to fix this error.  It does not start.  I have NO installation disc, they do not come with computers more!   So I'm stuck using the library computer.  MAD!  How dare they not warn that a simple upgrade of service packs would lose a whole years of documents, articles and any other thing, we left.

  HOW ON EARTH I FIX THAT AND ROLL BACK TO VISTA 1?

  F2 ONLY BRINGS ME TO COMPUTER CONFIGURATIONS.

  WHAT SHOULD I DO? RUN NOW AND SPEND 100.00 TO BUY A NEW VISTA INSTALLATION? YES.  CONSUMPTION SHOULD KNOW THIS IDEA OF BANK OF WINDOWS ROLL.

  See if that helps

  How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  Before trying again:

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

  If you value your data, you need to be backup on a regular basis, what would you do if your computer has been stolen or if the hard drive suddenly gone wrong? Please don't say you lose a whole years worth of documents and articles etc. as if it was that important to you, you would have these data backups. If you don't back up your data and you lose, it's your fault.

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot start Windows Vista after you download updates

  Original title: the last time I got a windows vista download it did.not end now if I turn off my computer it won, t wiyhout restart using a rescue disk also can, t open all files except when I connect

  Last time I had a windows down load it didn, t finished and my computer locked up had to use a rescue disk to start

  Hiartco1993,

  1. do you know what download you tried?

  2. do you receive error messages or error codes?

  3 have you tried booting in safe mode?

  You can first try to start in safe mode and try a system restore and check if it helps.

  Step 1:

  You can try to start in safe mode.

  Check out the link for more information on starting your computer in SafeMode below:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  You can try restoring the system to safe mode.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  You can consult the links for:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/What-is-System-Restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• This drive cannot start Windows. ensure that the drive controller is enabled in the bios

  so I built a new rig

  AMD fx 6300

  ASUS m5a78musb3

  WD caviar green 1 TB hard drive

  during the installation of windows 8 m getting this error "Windows is unable to start in this hard drive. activate the disk controller in the bios bla bla...

  I googled a lot... believe me!  changed sata controller ><->ide, ahci vice versa tried sata ports... disabled the uefi boot... allow a smart tracking.

  I tried with a different hard drive (WD caviar blue 500 GB) in the present, the rigging and it worked without hassle. Looks like the hard drive is damaged? any suggestions?

  I tried to format the drive with diskpart, but I keep getting i/o errors related to... I also tried with ubuntu its not appearing is not in the installation?

  In short, I can't start/format/partition this hard drive.

  Hi Rupesh,

  I'm sorry to inform drivers that is faulty, because you have built this computer, you can contact the store of the retailer where you bought the HARD drive or contact the drive manufacturer's Web site.

• Cannot start windows more after Microsoft Update

  I have XP.  Once Microsoft installed a auto update July 16, I could no longer open Windows normally.  What did do? That's happened?  How can I return to my computer if can't open?  It seems that the computer doesn't send any signal to the video monitor so I can't enter all orders. Finally, I learned that I can open in Mode safe mode but not in normal mode... But I need a normal mode to access everything.

  Of "automatic update" are what kind you referring?  As you have acknowledged, XP should not be getting updates.  I also asked if you have an installation disc, and you did not.

• Cannot install windows updates after the recent update of norton

  Appears to download upodates then it not install them and reverts the changes. Have tried disabling Norton Firewall, but did not work. Someone at - it suggestions? Thank you

  Contact norton support

• Get error 0x800106ba and cannot start Windows Defender

  Cannot start windows defender after installing Miicrosoft Security Essentials

  MSE disables Windows Defender from Vista:

  Microsoft Security Essentials has its own integrated version of the defender and it automatically disables the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the foregoing explains the compatibility issues with Windows Defender and MSE.

  See you soon.

  Mick Murphy - Microsoft partner