Use of the ring of metal, delivered with Dell Latitude 10 - ST2 stylus

Similar Questions

• The xps m1330 is delivered with an internal microphone or not?

  The xps m1330 is delivered with an internal microphone or not? I can not any sign of it.

  
  

• use of the correct type of phone with fax cor-

  Installation 7520 Photosmart all in one printer. Reading the posts previous to the forum and no explain why I get this error message when you try to get the fax configuration. (You do not use the appropriate phone cord type).

  I AM using the cable supplied with the printer. I tested with and without telephone set. When I plug a phone and connect it to the 2 - ext, I get a dial tone and dial out on a clear line.

  The printer is connected directly to a wall phone jack with no intermediate devices by using the line 2-wire provided. I get a PASS on the fax connected to the wall outlet active.

  I have seen this error before fax reports, but often the fax system still works.  You test the send/receive faxes, or you have just run the Test of fax on the printer?

  If you want to test your fax service please take a look at the HP Fax Back System Test service forum thread found here.

  I would like to know if the printer is successful or not in the send/receive faxes.

• Battery, not supported by the system and the display driver stopped responding with Dell Inspiron 1564 laptop

  Hello

  I had my laptop dell inspiron 1564 about two months ago and today when I turned on my laptop a message appeared on the screen the battery is not supported by the system . Can someone guide me through this question please?

  I have another question as well... the second day of my purchase of this product, that the screen is empty, n when I tried to turn on the key to the power of the laptop, a message appeared that the display driver has stopped responding earlier and it happened recently in a few days back as well. I will be very happy if someone can help me please on these two problems. In the hope of a solution in due course.

  Thank you

  Amira.

  2 months old?

  It is under warranty.

  Contact Dell and file a claim of guarantee on their records. as it may be the precursor of coming problems with it.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with Dell Latitude 2100 (with windows vista) is a driver (file: \windows\system32\drivers\msahci.sys) catch 22, it's that it doesn't have an internal cd-rom

  I have a dell latitude 2100 and when it is consumed first upward it goes to a screen of security and said that is wrong and it is said that the status of this file is 0xc000000f how I could fix this without an installation disk because it does not a cd-rom

  Hi Rick,

  Thanks for posting your query in Microsoft Community!

  The description of your problem, you are facing problems with your Dell Latitude 2100 and receiving tell them an error message which is bad and he said that the status of this file is 0xc000000f. In order to quickly provide a solution, please answer these questions:

  1. What is the exact error message with error code?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you check the drive for errors, and then check if it solves the problem.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

   

  Important: While running chkdsk on the drive, if bad sectors are found on the hard drive when chkdsk attempts to repair this sector, the data available in this area may be lost, and it is not recoverable.

  Method 2: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Note: It may prompt you to insert the Windows installation disc. However, you can use the external DVD player and check.

  Hope this information helps. Answer please if you have any additional questions about the problem you are having and we will be happy to help you further.

• Audio problem with Dell Latitude E6420 and Windows 8.1

  Hello community,

  I installed Windows 8.1 on my Latitude E6420 and I can get the sound to work. I installed the drivers available for Windows 8, but he doesn't play any sounds. The only thing that works continuously via a browser (e.g. youtube). When I test the device "speakers / headphones ' this is for me a"Failed to play test sound."but the"helmet of communication"device works without any problem.

  I can not activate the device "speakers / headphones" because it blocks other applications (Lync 2013) so I have to keep this option disabled.

  I look on the web for similar problems and it all points to the drivers for the video card (!)

  Is there a version of driver for this model? Or I can not use the latest version of the software in this model?

  Hello. See here for a list of Dell of the models that work with 8 and 8.1. Dell recommends not installing 8.1 on the Latitude E6420 model. Dell said 8 is correct but does not provide an audio driver IDT even for 8. I don't think that there will be provided by any Dell IDT audio driver for 8.1 since it is not recommended to install. This means that you must use the native audio driver supplied with Windows. The native driver is generic and you can usually get audio to work when using it but not all functions are working properly. All I can suggest is to find the generic audio driver in Device Manager (I don't know how it is in the list) and try to 'update' by allowing Windows to search for an update on the internet.

  Maybe someone at our Windows 8 jury can suggest an audio driver IDT, you can try to use. If you post here tell them that you already posted on the Audio card to the laptop so that they will not move your message here.

• Dell Latitude 10 ST2: Screen very dark after the Windows Update 8.1 & gameplay of Diablo 2

  Hello community,

  I just got a new Latitude 10 ST2, and I really appreciated the help until after that I updated for Windows 8.1 and played some Diablo 2. For some reason, my brightness is now always very low, regardless of whether the Adaptive brightness in my power management setting is enabled or disabled. I can manually change the brightness, but it has very little effect. It seems that the maximum brightness is really low for a reason any.

  I don't know if Diablo 2 has nothing to do with this problem, but I though that I would include it here because it uses very outdated graphics techniques that seem not very compatible with Windows 8.1. I had to change the compatibility settings of the game executable for Windows XP Service Pack 2, force them to run with 16-bit colors and also to disable the composition of the bureau. After closing the game, icons on the desktop still seemed a little wide (they looked rather 16-bit color and had some weird artifacts) and I had to restart the tablet to correct. After the reboot of the Tablet, the desktop icons were back to normal, but my light issues began to arrive.

  My first attempt at solving this problem was in the shape of the tablet. I used my USB stick that has the factory settings on it to format the Tablet and reinstall Windows 8. The process was a success, and I had no problem of brightness either. However, after the update to Windows 8.1, then by restarting the Tablet, my issue with the brightness came back.

  My second attempt was to try to update my drivers. I ran the auto updater provided with the Tablet, and it updated my BIOS. Unfortunately, it has not fixed the problem at all. Then, I took a look in the BIOS and found levels of brightness in the video section. The parameters are the following:

  Brightness on battery: 7
  Brightness of AC: 15

  I've tried corresponding to the brightness of the battery at 15, but it has no effect. The light problems don't occur that the Tablet is connected to a power outlet or not, I wasn't really that surprised that it didn't work. A maximum brightness of 15 is normal? (what is a percentage?) I don't want to change these settings without knowing exactly what they represent to avoid damage.

  My third attempt has updated the chipset drivers which includes the video driver. I installed the chipset driver and suddenly after that the screen went black a few times during the installation of the brightness has been completely restored and colors looked nice and bright again. However, when I rebooted the Tablet I found that the problems of brightness was back. Very rarely when I restart the Tablet, the brightness is normal again, but it is super rare. A subsequent reboot simply results in brightness problems return immediately.

  A few other things worth noting that come with the light problems:
  -All color gradients are not smooth. You can very clearly see the differences in brightness when a picture goes to a light color to a dark like a lot of buttons in Windows 8 start menu. It reminds me a lot of 16-bit color;
  -Whenever I try to change the display settings in the Intel Graphics and Media Control Panel, nothing happens. No matter how much I fiddle with the brightness, contrast or gamma, nothing changes, even after you apply the settings.
  -Diagnostic in the BIOS tests said that everything is OK;
  -The complete diagnosis provided by the PC Dell Diagnostics program showed that each test passed successfully.

  I really hope that someone can help me with this problem. The screen is also very dark, it makes it quite difficult to use tablet. Thank you!

  Kind regards

  StevenD91

  Thanks for the reply! After much trial and error, I discovered that my graphics driver has been be corrupted by AVG 2014 somehow. After yet another format and reinstall of Windows 8, but without AVG 2014 this time, everything works great! : D

• Screen turns black during the installation of Windows 8 on Dell Latitude E6400

  Hello

  I have a Dell Latitude E6400

  The specifications are:

  Intel Centrino 2

  4 GB OF DDR2 RAM

  HARD DRIVE 160 GB

  Core 2 Duo 2.53 GHz

  NVIDIA Quadro NVS 160M 256 MB DDR2

  I'm doing a clean install of Windows 8 pro 64 bit. The problem is that when I get to the stage where the installation application to connect to a wifi, all of a sudden, the screen goes black and then nothing happens. Sometimes I am able to move on to the next step where the installation process asks if I would like to use express settings or customize it. The same thing happens on this stage too. I could not go any further than this step.

  I tried dozens of times, even tried 2 different iso files and event tried a 32-bit Windows 8.

  Same thing happens evrytime, black screen and then nothing. I wasn't able to find that everything related to the internet.

  One last thing, if it's a problem of display driver, I can't set either because I already formatted my HARD drive.

  Can someone help me please:(c'est vraiment frustrant.)

  Thank you

  Hi shayanjalil,

  Dell Latitude E6400 has not been tested by Dell for Windows 8. You won't find drivers of Windows 8 for this system.

• Use of the HDMI on Satellite U400 (with XP)

  I have not found any thread that could answer me on this subject:
  is it or is it not possible to use the HDMI with XP?
  Because I can't find the HDMI for the U400 drivers. At least not for XP. Just Vista.

  So is there any drivers for XP?

  What you are talking about is Toshiba HDMI Control. As far as I know that it is not certain pilot special HDMI but the tool that allows to switch the laptop ON / OFF by a TV that supports the HDMI Control option.

• Use of the CPU to 100% even with no applications running

  Separated from this thread.

  I just started having this same problem with the same processes on my machine Win7 Pro.

  He arrived two mornings on 10 minutes where my core i7 8 - 4770K runs between 70 and 95% of use.

  Also, I see that the Media Player LogAgent is 11% CPU utilization and is 1.4 G in size during this period.

  He has only recently begun past and seeing the previous comments make me think that it could be linked to a recent Windows Update.

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

• Can I use only the a collection of photographs with Photos Apple '&' Adobe Creative Cloud

  I am new to Adobe Creative Cloud and have used Apple base 'Photos' collect/store my photos (mainly photographs of family more than 40 years) - Great to take pictures on my iPad to show parents.

  I bought Creative cloud not only to improve potentially good photographs of family and finally properly organize them, but to use it with my new found passion for digital SLR photography.

  However, I now seem to have two series double massive photographs. The one with the Photos of the Apple and the other with Lightroom. Is there a simple way, I use two Photos Apple & Lightroom just the single series of photographs, (though that I need to make changes to the image of files/folders exclusively through Lightroom) other than to have to constantly import/export photographs of an application to the hard drive before, before import/export photos to the other application?

  Thanking you in advance,

  M.

  Hello mv.

  The time that you have moved your iPhotos to Lightroom gallery, I believe that you used the Lightroom plugin to move the library

  There is also an option while you import images from iPhoto "keep files referenced in your iPhoto library.

  

  If this option is not duplicate images.

  Please let us know if it helps.

  Kind regards

  Tanuj

• Several uses for the final product, need help with Render & output parameters

  Aloha, this is my 1st time in this forum... posted this question in Premier Pro and has been mentioned here.

  I created an effect straight project. I want to make four 4 very specific uses.  Unfortunately, I don't know anything about these formats to be given options in AE - CS4.  One of the many 'rendering settings' and 'output module' settings 'make model '.  This seems the best option for me given my future use: 1) for the DVD; (2) for electronic mail; (3) for YouTube. (4) my web site.  I read and reread the rendering and export options in the manual of use-AE CS4 without success in understanding what each option should be used for.  I need help in the translation of pixelpicker-talk.

  Can someone help me about these accurate "rendering settings" and "output module" parameters listed in AE in the option "make and model"?

  Thanks a lot... come visit the watrer is warm and clear as always.

  KonaDon

  I understand - I think the article using After Effects is a very complete resource, explaining the various features and their purposes. But the real world is full of special cases that are very difficult to address in a manual. In addition, it is a moving target. Different best options today probably the best choice, next year.

  Let's see if we can help here:

  1-. DVD: on the technical side, it is always MPEG-2. A very specific taste of MPEG-2. But while After Effects will let you export a file of this type (choosing the MPEG - 2 DVD is predefined in the output Module), it is also true that most of the applications (such as Adobe Encore DVD) DVD authoring are very friendly in terms of letting you wear one (ideally, uncompressed) Quicktime or AVI (which in no way is compatible DVD) and do the encoding in MPEG-2 for you. So it is up to you: you can encode EI using the preset DVD MPEG-2, or you can use an application of coding specialized (such as Adobe Media Encoder in stand-alone mode) or simply let the DVD authoring application do the encoding for you. This should be very simple and in this case, you can simply render a Quicktime or AVI file without loss (there is a model of output Module called "Lossless" who will take care of everything. You can use the default value, the 'best' model to make settings in most cases).

  2-. E-mail: on the one hand, you need something that is really light and as good quality as possible. In the other, you want something universal compatibility, which can be read in all or almost all computers. H264 (advanced version of MPEG-4) format is really good in terms of efficiency, but its ' adoption is perhaps not as widespread yet. Flash Video (FLV) is really good in this regard. In this case, you could choose Adobe Flash Video (FLV) as the format in the output Module and then choose preset FLV 'Flash 8 web small' for this purpose.

  3 YouTube: it's not that simple. The ideal format for YouTube is not quite exist, they insist on the re-encoding each file that you download, even if your file is technically identical in every way to their versions. So what you want here is something that looks good and it isn't huge to download. This all spells 'H264', in my opinion. The details depend on the question of if your Composition is HD or SD, 4:3 or 16:9, etc. Strange as it may seem, the big "iPod" preset for the format H264 is a good starting point. You can customize it to increase the speed of transmission a little (maybe 2 or 2.5 Mbps, against 1.5 Mbps).

  4 website: even once, you need something that most people already have in their computers. Flash Video is an excellent choice, since about 98 percent of users have the Flash plugin. But in this case, you can have more great heights and flow rates, so you can use the "Flash 8 big' defined by default as a starting point. Once the Flash 10 plugin (which now supports the H264 in addition FLV) spreads in the future, you could standardize on H264 in a delivery format, with different settings for each type of destination.

  I hope this helps.

• Script to get use of the memory with the parameters like VM uses, active, granted

  
  Hi friends

  Can someone help me get the powercli scripting to get the use of the VM folder memory wise with metricks as consumed, Active, granted for two weeks with a period of time for example special hours of buisness with output to a CSV as below

  Vmname	Esxhost	ActiveMemory	Grantedmemory	Memory consumption	Folder

  It seems that the statistical level history interval 3 (last month) is not set to at least 2.

  The counters active and issued both require level 1.

  

  

  Consommé requires level 1

  

• Problems with the Lord of the RINGS

  Tried of the Lord of the RINGS to work on my Dell computer.  It will load the files on the CD/DVD and allows you to uninstall them as well (I did several times).  When I try to play the game, I receive a message to install the correct CD, which is funny because the good CD is already in the drive.  It irritates me a bit since it worked on my old computer very well.

  No problem, I sometimes forget to do the simple things.

  EA no longer manages the Lord of the rings games due contract expired, but you can still find old plates of this site.

  http://lordoftherings.FileFront.com/

• BlackBerry 8310 curve + trackball replacement Smartphones ring / how to place the pins of the ring?

  Hi all

  I have a curve 8310 and it's maybe a very stupid question to many of you :-)

  Can someone pl tell me in directions whitch I need to hold the pins of the ring before pushing on the trackball?

  Thx a lot for the help!

  Kim

  For the round bezel trackball, there are pine trees on three sides and none on one side. This side without pins is the upper part of the ring that is inserted with this side non-goupille to the top of the BlackBerry.

  See the video here starting about 03:30 min

  http://www.YouTube.com/watch?v=KvYbwlQL9Pg