Use of the surveillance report

Similar Questions

• Preceded by scenarios * are used in the optimization reports

  Can anyone describe the procedure since the capacity Planner dashboard to attach a custom script to run with the progress report, the synopsis and evaluation reports.

  I see that only scenarios preceded by * are used in the optimization reports, but I can't understand how to map, one of my scenarios customized to these reports. Thanks - Jeff

  Jeffoutwest,

  Unfortunately, this is not possible.  These optimization reports are 'canned' and while you can change certain things about them (via the reports... Settings menu of optimization reports), you can't let them use one of your custom scenarios.

  Kind regards

  Toby

  Consultant Senior PSO

  Advaced Services

  VMware

• Error-2147352567 when you use save the vi report

  Hello

  I am developing a software test bench end line for a company. Everything was going well until I met an unexpected error which I don't understand. My code works a simulation engine and stores data in two excel files. When I have the path disconnected to save the report to the File.vi (screenshot 1), my program works without problem and records one of the files and returns an error due to the vi save report being disconnected (as expected). But when I connect the path to save the report to the File.vi, I get an error-2147352567 (screenshot 2) at a table to append to report.vi elsewhere in the code, which worked perfectly well until the road was connected to the vi to save the report. Also, now the second excel file is saved because its path has been connected. I don't understand what is the question. I couldn't find any source that has given me a reasonable solution to the problem either. I use Labview for less than 2 weeks, so forgive me if I forgot something.

  Hi DPAC.

  My apologies for the confusion in the previous post, I thank very you much to clarify it.

  Following my last post; the error was due to a race condition. There is no data flow between two separate writing report files. This means that LabVIEW will try to run the two bits of code in parallel. However, it was sometimes causing one of the sub-vis to be called by two different parts of the code at the same time, causing the error.

  This is the reason for which the code executes without error above if you have disconnected the path to the first 'save report to File.vi', because this part of the code was not running, allowing the second party to run freely.

  To counter this I simply wired terminal 'error' "save report to File.vi" (the one that used the All_Saved.xlsx) in the terminal ' error in ' of the 'new Report.vi' (one who has used the Template.xlsx). Because the screws will not work until all entries are filled, this forces the writing of the first report before the writing of the second report, not occur at the same time.

  I have attached the revised version of the "EOL_V1.vi" where you will be able to see how I wired errors to force execution.

  I also noticed that you have not initialized your shift register "speed". This means that every time that you run the program, it will retain the last value from the previous execution. Is - this intentional? This means that your worksheet does not properly update if you run the program twice in a row.

  Thank you

• How can I access the filthers used in the interactive reports?

  Greetings,
  
  I develop several applications for APEX.
  Right now I make use of interactive reports.
  They are excellent tools, simple querys can do a lot if they use an interactive report.
  
  How you can that yend users can perform a filthers on the road is one of the best features that they have, from my point of view.
  It's so good that I was wondering if it is possible to use the filthers activated by an end user.
  
  Example, this query is in an interactive report: SELECT name, action, year of aux_table;
  
  If the user sees every line of it, but being in an interactive report, the user can add a filther in column of the year, for example, and display only the lines of the year 2008.
  It is very well... And here the question arises...
  
  Suppose I want to do a query based on the filthers currently, the user has activated, is this possible?
  I have a created delete action that will delete all the files, BUT I want to apply the filthers to the end user than delete action, the action would be:
  
  DELETE FROM aux_table where year = 2008
  
  Is it possible to make querys that take advantage of the filthers defined by the user for interactive reports?
  
  Thank you

  NP - take a look on Re: interactive report - save the output and links there, they can help guide you

  Andy

• I use trusteer for Bank report but it will not support the beta version firefox o 9, suggestions?

  I use trusteer for banking report, but it will not support the beta version of firefox 9, suggestions

  Trusteer informed me that a new version of their report software that is compatible with Firefox 9 is available at http://download.trusteer.com/Gcur4Wtnu/RapportSetup.exe

• Using c# to check if the main report contains a sub report in the Crystal Reports Viewer

  Hello

  I currently have a web form application, which displays a crystal report already created using the crystal reports Viewer. In this report, the format is a few pages of the main report, followed by a few pages of the report of void. However, when the user first opens the application, all they see is the main report. Unless they click on the subpage of report the report viewer do not recognize as one of void, even if the user is on the page of report of void.

  I was wondering if there are ways to use the c# code to check if some pages of the main report contains a report without user sup a goes through each page of the report?

  Thanks a lot for your help!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• UCCX 10.6 history report showing the use of the Port

  Hello

  I'm looking for a report that can show the use of the port by queue/application over a period of time.  What I'm looking for, that's exactly how my CTI ports is used for which at one point.

  We have more channels PRI in what we do the ports and want to make sure that we are not undersubscibing applications, if we are the ones who and when and if we go over our 150 ports are looking to buy licenses of more to come.

  Someone knows something that could do the trick - or this should be a personalized work?

  Thank you

  James

  Hi James,

  Please see the hourly report Utilization license available in your version in cuic which comes with UCCX. Look at the below Guide to historical reports for more detals on this report:

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/cust_contact/contact _...

  Concerning

  Deepak

  -Note post - useful

• Getting error messgae"problem connecting to the Windows Error Reporting Service. Please try again later! "when you use the error report feature

  Original title: error report function

  When I use the error report feature a warning appears "problem connecting to the Windows Error Reporting Service. Please try again later! »

  It started some time ago and I have plenty of backup errors.

  Using W7

  Hi John,.

  I suggest running Disk Cleanup and selecting Remove all the Windows Error Reporting log files by selecting the checkbox and then click OK:
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup
  Check if you are then able to start the Windows Error Reporting Service.

• Report of BEEP in the use of the content on the Emdedded OBIEE dashboard not working not

  Report of BI Publisher throwing error 'Allowed access' seen OBIEE dashboard page.

  OBIEE and BEEP is integrated by default when it is installed.

  Requirement:

  Embed report BEEP in OBIEE dashboard page.

  Report parameters a BEEP and then tried the method to incorporate the full report without "Header" information below

  Steps for coating

  1. connected to BEEP via the URL xmlpserver and link report generated using option "report sharing link.

  Below the URL generated for the 'No Header' option

  http:// < Server >: < port > / xmlpserver/training/My_Test/Data Model Editor / Oracle BI Analysis Report.xdo? _xpf = & _xpt = 0 & _xdo=%2FTraining%2FMy_Test%2FData%20Model%20Editor%2FOracle%20BI%20Analysis%20Report.xdo & _xmode = 2 & _params_dashboardexpr = xdo%3Axdo%3A_paramssaw.param.Month_div_input=All & _paramssaw.param.Month = * & product = _xt & _xf = html & _xautorun = true

  2. copy the generated URL

  3. connected to OBIEE analytical URL and created a new dashboard

  4. slipped and fell "Embedded content" Dashboard object

  5 a. provided the URL copied in embedded content

  6 saved the dashboard and it ran.

  7 error received unauthorized access

  Please note that I received as "Suspicion of Injection of Script" error sometimes.

  I see that no permissions related issue because I've been running reports by using administrator privileges.

  Details of the attached error.

  Thank you!

  Problem has been solved by following step below

  The spaces in between the name of the report template/folder/data should be replaced with % 20.

  URL before change

  http:// :/xmlpserver/Training/My_Test/Data Model Editor/Oracle BI Analysis Report.xdo?_xpf=&_xpt=0&_xdo=%2FTraining%2FMy_Test%2FData%20Model%20Editor%2FOracle%20BI%20Analysis%20Report.xdo&_xmode=2&_params_dashboardexpr=&xdo%3Axdo%3A_paramssaw.param.Month_div_input=All&_paramssaw.param.Month=*&_xt=Product&_xf=html&_xautorun=true

  URL after change

  http:// :/xmlpserver/Training/My_Test/Data%20Model%20Editor/Oracle%20BI%20Analysis%20Report.xdo?_xpf=&_xpt=0&_xdo=%2FTraining%2FMy_Test%2FData%20Model%20Editor%2FOracle%20BI%20Analysis%20Report.xdo&_xmode=2&_params_dashboardexpr=&xdo%3Axdo%3A_paramssaw.param.Month_div_input=All&_paramssaw.param.Month=*&_xt=Product&_xf=html&_xautorun=true

• VM - use of the real disk (report)

  Hello

  I already know the answer, but you guys surprise me sometimes what you can do.

  I have a lot of windows and linux vms.

  is it possible to run a report to see what is the amount of the use of the disc each virtual machine uses. So what I mean is if the virtual machine has several VMDK that add up to 100g, but the virtual machine itself uses only 30 GB at the OS level. is there a way to capture this info and export it on?

  I sincerely think not, but I'm asking anyway

  You mean like this?

  $Report = @()
  
  Get-Cluster Cluster |Get-VM | %{  $ReportRow = "" | Select-Object VMName,DiskCapacity,DiskFreespace  $ReportRow.VMName = $_.Name  $ReportRow.DiskCapacity = $_.Guest.Disks | Measure-Object CapacityGB -Sum | Select -ExpandProperty Sum  $ReportRow.DiskFreespace = $ReportRow.DiskCapacity - ($_.Guest.Disks | Measure-Object FreeSpaceGB -Sum | Select -ExpandProperty Sum)  $Report += $ReportRow}
  
  $Report
  

• By using the search field of the interactive report

  Hello
  
  I want to use the search field of the interactive report to set this value in a page item, use it to pass this value to another feature.
  
  How can I do this?
  
  Concerning

  Eve wrote:
  Hello

  I want to use the search field of the interactive report to set this value in a page item, use it to pass this value to another feature.

  How can I do this?

  Concerning

  Create a dynamic action as follows:

  Event: Before updating
  Selection type: Region
  Region:

  Real Action:

  Action: Run the JavaScript Code
  Code: $s ('PX_YOUR_ITEM_NAME', $v ('apexir_SEARCH'));

  Click on create

  When it is created, change the dynamic action and define the scope of the event on the dynamics

• Report model 101 - bubbles of commentary (used during the creation of SQL report)

  Hello
  
  There is a type of report - comment bubbles [Theme - 24, 25, 26]
  Has anyone tried creating SQL report using this model.
  
  OR if anyone knows how to use it and what should be the syntax of SQL query for the use of this model.
  
  Thank you
  Deepak

  Hi Deepak.

  I guess you run APEX 4.2
  There is a packaged application included with 4.2 that is called 'Customer Tracker'
  Page 50, you will find a rewgion where these how bubles are used (unlock the app to view the source).

  Concerning
  Bottom

• Use the dynamic report with BI Publisher parameters

  Are there tips for reports in BI Publisher? For example, I would use the same report for one person or many people. This would mean that where clause should be added when it is for the individual and is not necessary for the entire population. I don't see a way to dynamically build the report using "Report queries" in the shared components.
  It is easy to build a sql query based on various selection criteria in the Source to a pagethat of the region then gets displayedd on the page but I don't see a lot of flexibility in creating a report with BI Publisher at the Apex.

  How about from the collections?

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• Log file that can be used to track the HFR reports HTML preview

  Hello
  
  Could if it you please let me know the log file which can be used to track the preview HTML of the HFR reports?
  
  Thank you
  Aparna

  You can check the FinancialReporting0.log and the FRLogging.log. You can return the same thing in the
  "http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_troubleshooting_11121.pdf", page 47.

• do not show status report using view the web document.

  Hello!
  
  I use oracle 10g and I've been running report using view the web document that it works correctly.
  
  I want that
  When I press the button then Server do not show report but report wil run succssfully in the server.
  
  any body can tell me that how can I do not show the status of the report.

  Problem have been sene using javascrip as follows

  WEB. SHOW_DOCUMENT ('javascript:window.open (http://severname/reports/rwservlet?destype=FILE&userid=&desformat=PDF&yourparameters&report=reportname.rep&PARAMFORM=no); self.close ()');

  Published by: Hashim Raza Syed on January 6, 2011 23:37