Preceded by scenarios * are used in the optimization reports

Similar Questions

• What type of LKM, IKM modules are used in the scenario of perticular?

  Hello

  I doubt, what types of modules are used in the scenario of perticular. For example, I created the FILE interface of FILE FLAT DISH.

  for this I imported LKM FILE SQL and IKM SQL to ADD the FILES of modules. Executed successfully.

  I want to know on "what kind of modules are I have to import, when I try to connect a DB to different DB, flat file DB, flat file to DB etc.

  Please send me any document.

  Thank you and best regards,

  A.kavyakumari.

  Have a look on the following document, a bit old but still is a good overview of most of the widely used available KMs

  http://www.Oracle.com/technetwork/TestContent/oracledi-km-reference-130306.PDF

• 'Burned' fingers index to use MacBook Pro trackpad: my both hands, index fingers. which are based on the computer next to the trackpad or are used on the trackboard are painful, feel like they were burnt, and I can barely move them.  Yes, I did

  My both hands, index fingers. which are based on the computer next to the trackpad or are used on the trackboard are painful, feel like they were burnt, and I can barely move them.  I do not have this problem before, I bought my new Mac - specifications below: it hurts and I don't have a problem with my windows, iPad or Samsung Galaxy equipment operating systems computers.

  It feels like radiation leaking through the computer case.  Is the radiation involved in the chips?

  MacBook Pro

  Model identifier: MacBookPro11, 4

  Processor name: Intel Core i7

  Processor speed: 2.2 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 16 GB

  Boot ROM version: MBP114.0172.B06

  Version of the SCM (System): 2.29f24

  Are you use while plugged in, I feel a buzzing in my 13-inch rMBP (12.1)

• How Windows Server backup and command-line tools are used in the installation of vCSHB?

  How the Windows Server backup and command-line tools are used during the installation of vCSHB?  It takes in all types of deployments (PtoV, VtoV, PtoP)? It is used to create files that are put in file sharing for the second node to use during the installation of vCSHB or is it only used during a clone of vCSHB of a physical to physical deployment operation?  These tools are not used in some deployments?

  You need backup Windows Server installed on the source and destination, and during the installation of vCSHB the installer will call the wbadmin (Windows Server Backup Utility) and will save the configuration and application data (application data is optimal, but can reduce the synchronization time after the installation of the secondary node). On the secondary node you will should only run the vCSHB Installer and everything will be restored.

  Check this blog entry for some info on P2P deployment issues: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/

• How do I know which extracts are used in the sequence

  Is there a way to tell if the clips in your project Panel are used in the current sequence? other than will for throughone search options. Can I somehow insert a column in the project Panel that would have activated, use the clip?

  Thank you

  Look in the Panel project to "use video" or "audio".  It will tell you the number of times that a clip has been used.

  The mouse click on the arrow next to it, and it will tell you the sequences in which it was used.

• How to identify the clips in the finder that are used in the scenario?

  Heya, this is my first post on this forum and a question ive been struggeling with during some time...

  I am trying to store my images and reduce the amount of HARD disk space old projects are taking place. I have a LOT of images I will ever use again saved in the folders I want to easily identify and get rid of. Is it possible in first pro to 'tag' files that were used in the Assembly or the project, and then I can just go and remove those who are not. Similar to the sequels feature that removes the unused clips in the project (although their leaves still on the disc).

  It also would make transcoding the right files much easier that I currently have to identify each of them individually using the show in finder option...

  help on this would be highly appreciated

  I use CS5 on macbook for editing images canon DSLR, is there more information you guys need?

  See you soon

  Rich

  In the project Panel, click the drop-down; It's the small pile o ' thing of pancakes in the upper right corner of the Panel. Select "display metadata." In the search box, type 'use' - this will reveal the labels of metadata using video and Audio. Check those to add and click OK. they will now be added to the columns in the project Panel. Now, you can sort on the filter columns used - unused clips will not have a number associated with this column. Select them all and if you really want to purge them of the drive, press Ctrl / Cmd + delete - that will remove the media from the drive.

  If you just want to get rid of the clips, project > remove unused will do.

• Why filtering by "unused" shows the files that are used in the project?

  Above the list of clips, I choose 'unused '.  I thought that this would be a practical way to show me the files I can delete the library because they are not used.  The thing is, I select this option, I see it shows me files that are certainly in use on the timeline, then what's the point of this?  How can I show actually files that are not used and as long as I can safely remove?

  It shows the unused portions of clips. If you want to remove a clip that has any items used in a project, you're better activation of the clipping indicator used. Any clip with an orange bar has been used.

• What kind of fields / widgets are used in the Application Permissions screen?

  For the config page of my application, I would like to have several hidden options until needed and I wish I had that look similar to the screen of permissions for a module - IE the one with the titles of "Connections", "Interactions" and "User data", which can then be extended to supplying indented from the fields below. Y at - it a field / set of fields that have already implemented this feature, or is this a case of build myself off primitives?

  Thank you.

  Take a look at TreeField.

  There are documents in the developer's Guide and the two KB statutes that might be useful:

  How - to add a TreeField to a screen of the device
  Article number: DB-00416

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800345/...

  -How to use the ServiceRouting API

  (not really on TreeFeidl, but seems to be live actual work, for example, you can plug and play with)
  Article number: DB-00483

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800441/How_To _...

  I never had the opportunity to use them in anger, so sorry, no advice to give you.

• Is it possible to save your project who keeps only files that are used in the order and get rid of files that you do not use?

  my project is at an advanced stage now, a lot of media loaded up and its got to the point where the project keeps "forgetting" his makes (the line goes to yellow when it should be green)

  I assume that this may be due to the face that I have a lot of media loaded upward there now, including many from the effects of exports which should be large enough

  so, I would like to save the project or export the project in such a way so that it retains only the bare minimum of files that im actually... better still, use if she maintained only the part of the files that are used and stripes out of the rest, but maybe it's wishful thinking?

  I also wonder if I could save the project, bringing files in a separate folder, only the files used in the project

  I'd love to, having someone take the time to clear this up for me.  Thank you

  Project Manager in the file Menu

  Backup first carefully!

• The difference between them and how they are used by the first?

  I'll buy Adobe CS5 Master Collection. I have a job that has Win 7 Ultimate 64-bit. I have a Nvidia CX card that is installed. The Nvidia card came with fast HD. I will also receive a Matrox MXO2 mini for my junction box.

  My Question is what is the difference between - fast HD, elemental Accelerator, technology Max that you can get with the Matrox junction box, and all this will be of use to me or come into conflict with the Mercury playback engine. I don't think I'll buy the Max technology (no not necessary). But I'm confused on the other 3 being redundant or contradictory.

  Can someone please suggest another option for a junction box? Some companies do not support their products if you are using a Dell workstation.

  Any help would be greatly appreciated.

  Thanks in advance for any advice or suggestions.

  Martin

  Post edited by: Mallady1

  RapiHD is the former name of the elemental accelerator. The EA is a PP plugin that uses your graphics card from nVidia (via CUDA, nVidia GPU programming structure) to speed up encoding h.264/AVC output files. The previous link in this thread is wrong, but here is a link to work for the elemental Accelerator. The product is pretty much dead end, so much that it will be not a CS5 version. There is a stand-alone version called lucky, but it requires you to use Adobe products to encode firstly your timeline to an uncompressed AVI file (or any other format), thus defeating the purpose.

  The Mercury playback engine uses CUDA to accelerate the effects, transitions and insight into the chronology PP. It accelerates only marginally encoding, or not at all. There are a lot of threads on this forum discuss the EMT.

  I have a Blackmagic Design card, so I can't tell you anything about the Matrox card and its software.

• Discovers all rights are used on the rights to file or server

  We use Quest AD or have direct use on the server, I am trying to clean the server and assign groups instead of users connected directly to the server; instead of walking down, he threw all the files is a tool that you print or view with rights on the server? This would help and speed up consolidation of servers.

  Please email me @ * address email is removed from the privacy *

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Or contact quest Support:

  http://www.quest.com/Active-Directory/

  See you soon.

• Script to get multimedia files that are used in the sequence active

  I have a script which replaces all the media in a project, which is great. Except when you have 600 movie files to cross!  I would like to provide the user the ability to simply replace the film used in the active sequence, but I can't figure out how to get the names of the files associated with the clips in a sequence.

  The closest I got music videos is "app.project.activeSequence.videoTracks". I used the Explorer object and function from the PProPanel example getProps and getMethods, and I can't find a way to the media for a sequence file info.

  Thanks for your time!

  You can export FCP XML and parse the clips used from there.

• Error-2147352567 when you use save the vi report

  Hello

  I am developing a software test bench end line for a company. Everything was going well until I met an unexpected error which I don't understand. My code works a simulation engine and stores data in two excel files. When I have the path disconnected to save the report to the File.vi (screenshot 1), my program works without problem and records one of the files and returns an error due to the vi save report being disconnected (as expected). But when I connect the path to save the report to the File.vi, I get an error-2147352567 (screenshot 2) at a table to append to report.vi elsewhere in the code, which worked perfectly well until the road was connected to the vi to save the report. Also, now the second excel file is saved because its path has been connected. I don't understand what is the question. I couldn't find any source that has given me a reasonable solution to the problem either. I use Labview for less than 2 weeks, so forgive me if I forgot something.

  Hi DPAC.

  My apologies for the confusion in the previous post, I thank very you much to clarify it.

  Following my last post; the error was due to a race condition. There is no data flow between two separate writing report files. This means that LabVIEW will try to run the two bits of code in parallel. However, it was sometimes causing one of the sub-vis to be called by two different parts of the code at the same time, causing the error.

  This is the reason for which the code executes without error above if you have disconnected the path to the first 'save report to File.vi', because this part of the code was not running, allowing the second party to run freely.

  To counter this I simply wired terminal 'error' "save report to File.vi" (the one that used the All_Saved.xlsx) in the terminal ' error in ' of the 'new Report.vi' (one who has used the Template.xlsx). Because the screws will not work until all entries are filled, this forces the writing of the first report before the writing of the second report, not occur at the same time.

  I have attached the revised version of the "EOL_V1.vi" where you will be able to see how I wired errors to force execution.

  I also noticed that you have not initialized your shift register "speed". This means that every time that you run the program, it will retain the last value from the previous execution. Is - this intentional? This means that your worksheet does not properly update if you run the program twice in a row.

  Thank you

• Use of the surveillance report

  Hello
  
  Is it possible to see how often a report is used?
  
  Here, we have designed a set of staff reports access using the viewer and we want to have an exact idea whose reports are used, how often, and by how many different users.
  
  We would just people but really wanted a more accurate picture is that it is possible?
  
  Thank you
  
  Sue

  Hi Sue,

  From your post, it is unclear which version of discoverer, you're on. The answer would affect how you should address the issue. First of all, I would read Chapter 19 in the Disco Administration user guide (B13916_04.pdf), which is titled "EUL State of workbooks. He provided instructions on running the scripts that create a business area of metadata that can help you answer questions from companies that you have identified.

  For me, I use OracleBI Discoverer 10g (10.1.2.2)/End user layer - 5.1.1.0.0.0 and my EUL is associated with Oracle EBS, so I followed the instructions on page 346 to create "The discoverer EUL V5" business district.) This has proved to be very useful. I also started to create a library of queries of metadata, but I really rely on this business area a lot.

  Patrick

• FBI and XMLINDEX not use by the optimizer

  Hello

  I've created a function based index but optimizer is never using my index and found for BINARYXML FBI is not suggested rather THAN XMLINDEX is good, it seems does not work for me, but even.

  I tried to use tips but doesn't help me at all. Any suggestions would be really useful.

  SQL > show parameter index

  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  optimizer_index_caching integer 0
  OPTIMIZER_INDEX_COST_ADJ integer 1
  optimizer_use_invisible_indexes boolean FALSE
  skip_unusable_indexes Boolean TRUE
  SQL >

  SQL > desc FXXX_SEC_POS_FB
  Name                                                                                  Null?    Type
  ------------------------------------------------------------------------------------- -------- ----------------------------------------------------------
  RECID A NOT NULL VARCHAR2 (255)
  XMLRECORD                                                                                      SYS. XMLTYPE BINARY STORAGE

  SQL >

  SQL * more: Production release 11.2.0.4.0 Wed Feb 11 06:34:39 2015

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options

  INDEX_NAME INDEX_TYPE VISIBILITY FUNCIDX_ DOMIDX_MANAGEM
  ------------------------------ --------------------------- --------- -------- --------------
  SYS_IL0000174507C00003$ $ LOB VISIBLE
  BASED ON A NORMAL VISIBLE ENABLED FUNCTION IX_FBNK_SEC_POS_FB_C2
  BASED ON A NORMAL VISIBLE ENABLED FUNCTION IX_FBNK_SEC_POS_FB_C81

  SELECT t.RECID FROM FBNK_SEC_POS_FB WHERE SECURITY_NUMBER = t'000566-000' and xmlexists ("$xmlrecvar/row [c81/text () ="US0010001"]' by the WAY ')

  XMLRECORD AS 'xmlrecvar')

  The higher the SQL statement execution Plan:

  Hash value of plan: 4259655978

  --------------------------------------------------------------------------------------
  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |
  --------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT |                 |   361K |   738 M |   197K (2) | 00:39:31 |
  |   1.  SEMI NESTED LOOPS.                 |   361K |   738 M |   197K (2) | 00:39:31 |
  |*  2 |   TABLE ACCESS FULL | FBNK_SEC_POS_FB |  4427 |  9247K |  75786 (1) | 00:15:10 |
  |*  3 |   XPATH EVALUATION.                 |       |       |            |          |
  --------------------------------------------------------------------------------------

  Name of the query block / Alias object (identified by the operation identity card):
  -------------------------------------------------------------

  1 SALT$ BCF67709
  2 SALT$ BCF67709 / T@SEL$1

  Information of predicates (identified by the operation identity card):
  ---------------------------------------------------

  2 - filter("SECURITY_NUMBER"='000566-000')
  3 - filter("P".") C_01$ "= 'US0010001')

  Projection of the column information (identified by the operation identity card):
  -----------------------------------------------------------

  1 (#keys = 0) "T". "RECID" [VARCHAR2, 255], "T" "." " SYS_NC00003$ '[LOB, 4000],
  "SECURITY_NUMBER" [VARCHAR2, 12]
  2 - « T ». "RECID" [VARCHAR2, 255], "T" "." " SYS_NC00003$ '[LOB, 4000],
  "SECURITY_NUMBER" [VARCHAR2, 12]
  3 VALUE (A0) [4000]

  Note
  -----
  -dynamic sample used for this survey (level = 2)
  LETTER: SQL: 2:Full: SELECT t.RECID FROM FBNK_SEC_POS_FB WHERE SECURITY_NUMBER = t'000566-000' and xmlexists (' $xmlrecvar/row [c81 / text ()])

  (= "US0010001"]' in PASSING XMLRECORD AS 'xmlrecvar')

  4096 selected records

  You probably won't see the difference in approach...

  I have NOT used and not STRUCTURED XML, but a STRUCTURED index rather XML index...

  • Index unstructured XML when introduced in 11.1 and use an ARRAY of path. Unstructured XML indexes are mainly used for research "blurred".
  • Structured XML indexes where introduced in 11.2 and make use of one or more TABLES of CONTENTS that contain, must contain content of the structured parts in the XML document

  So I have not used

  CREATE INDEX IX_FXXX_AAA_BBB_FB_FB
  ON FXXX_AAA_BBB_FB (XMLRECORD)
  INDEXTYPE IS XDB.XMLINDEX
  PARAMETERS ('  PATH TABLE IX_PATH_TABLE
                  PATHS (  INCLUDE ( /row/c2 /row/c81 ))'
              );
  

  but instead I used a XML structured, based on the function XMLTABLE index

  CREATE INDEX IX_FXXX_AAA_BBB_FB_FB
    ON FXXX_AAA_BBB_FB (XMLRECORD)
  INDEXTYPE IS XDB.XMLINDEX
    PARAMETERS (q'# GROUP SXI_GROUP
                    XMLTABLE SXI_CONTENT_TABLE
                    '/row'
                    COLUMNS
                      C2  VARCHAR2(100)     PATH 'c2'
                    , C81 VARCHAR2(100)     PATH 'c81'
                  #');
  

  On those, I also created EXTRA build secondary indexes on the columns of the TABLE CONTENT with the name 'SXI_CONTENT_TABLE '.

  create index SEC_FXXX_C2_FB on SXI_CONTENT_TABLE(C2);
  create index SEC_FXXX_C81_FB on SXI_CONTENT_TABLE(C81);
  create unique index SEC_FXXX_RIDC2C81_FB on SXI_CONTENT_TABLE(RID, C2, C81);
  

  ...