Use PasswordEditField to enable the multi tap

Similar Questions

• My laptop keyboard types numbers instead of letters, but when I use a different keyboard, the keyboard tape letters. Any help? Thank you.

  Suddenly, my laptop keyboard types numbers - usually to the right of the letter 'y '.  When I plug another keyboard, the keyboard to type the letters, but the laptop continues to type numbers.

  I was antics and found the fix.  Press Fn (function key) and press the Nr/UK.  Don't know why it worked, but it did.

• Problem with the touchpad: Tap to click does not work if I use a standard account

  Hi all

  I have a problem with my laptop that I don't understand and I need help from the community.
  As the title says... If I connect to my laptop using a standard account the touchpad does not work if I try to tap to click. Left and right buttons work, move the slider works, works of scrolling, but endearing tape... not even a single tap. If I log in with my account as an administrator, the touchpad works like a charm, no problems. Tap to click and everything you want. If I disconnect the admin account and sign in as a standard user, the problems are back again. I can move the cursor, click on the two buttons (left, right), but I can't type to click...

  I tried to reinstall the driver for the touchpad (which is MOMENTUM...) but it did not. I tried to see if there is any option that can prevent this tapping or something... but in the control panel > Touchpad > Tap is turned on. A strange thing in the control panel of the Touchpad is that [when loggend as a standard user] I get an error "unhandled exception has occurred in your application. If you click on continue the application will ignore this error and attempt to continue. If you click on exit the application will close immediately. "and a new line saying"index was outside the bounds of the array. If I click on continue the error disappears, but reappears if stationary "double-tap" enable/disable option. If I click on leave the Touchpad Control Panel closes...

  All this trouble occurs only when I use the standard account. With the administrator account, I don't get any errors so I soar options, disable them, activate them and most importantly, the tap to click works.

  What is the problem with the standard account?

  I have Windows 7 Home Premium 64-bit Service Pack 1.

  Can someone help me please?

  Hi Johnxf,

  ·         Did you do changes on the computer before the show?

  As he works in an administrator account, then probably your standard user account have been damaged and would need a fix.

  Follow the article provided below to fix the corrupted user profile:

   

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Let us know if that helps.

• How to enable the remote desktop on windows 7 because it is missing in system properties | using Remote tab

  How to enable the remote desktop on windows 7 because it is missing in system properties | tab use remotely.

  I am running Windows 7 Ultimate edition with service pack 1.

  I used to connect my mac via the desktop tool to remotely (2.1) on my mac to my pc windows 7.

  Now, it does not.  Check the services of windows 7 I have ensured that all the remote control * services are enabled, but I still do see the Remote Desktop option in system, under the remote settings properties.

  Any help would be appreciated.

  MasterJay1

  Click Start, click Help, and then type this phrase in the search box:

  enable remote desktop

  Article 5 will have explicit instructions for the task.

• How to use the SDLT tape drive in the guest OS VM

  Dear

  now, I have HP DL380 G5 Server running windows 2003 Ent. with bus adapter host SC11xe PCI - E HP which directly connected tp SDLT Tape Drive as backup server and use for the backup operation.

  I want to move the physical backup to host vmware server and EMC AX4 allows you to have a backup online and allows you to take backup offline, SDLT tape drive

  My question is how I use the SDLT tape drive in guest OS vm and vmware knows "HP PCI - E SC11xe Host bus adapter" or not.

  Please let me know how to do this.

  Kind regards

  Mahdi Bellavia

  I have a G5 DL385 (AMD of the DL380 version) with a DLT3.   I use an Adaptec 29320LPE, appearing on the compatibility list.  We plugged a HP Ultrium 920 changer using the 'old method' SCSI passthrough.  We bought the Adaptec card, because we used initially ESX3.5.  We are now on ESX4.0, but for various reasons, the configuration left the same, so I have not tried with VMDirectPath I don't know if it is possible to use the SC11ex card, but if you arrive VMDirectPath at work, it seems then you need another SCSI card.

• How to use the remote tape connected to an another mediaserver library?

  Hi 2Tous!
  
  I have 2 media servers in my environment of SecureBackup.
  The first dbsora98 with the virtual tape library (on SPARC Solaris 10) and the second dbsora17 with ADIC Scalar (OEL 5.6)
  
  But why I can't use scalar dbsora98 or dbsora17?
  
  dbsora17:
  OB > inv scalar-L
  Error: cannot open the connection of qlm - failed validate the certificate
  OB > lsv scalar-L
  Error: cannot open the connection of qlm - failed validate the certificate
  OB > unlabelv reader1-d-f 1
  Error: cannot open the connection of qlm - failed validate the certificate
  OB > pingh dbsora98
  dbsora98 (address 10.159.4.186): Oracle Secure Backup and NDMP services are available
  OB > scalar pingd
  Info: scalar library accessible.
  News: Player 1 reader1 accessible.
  Info: accessible 2 lecteur2 player.
  
  
  dbsora98:
  OB > inv scalar-L
  OB > lsv scalar-L
  Inventory of the scalar library:
  in 1: barcode LTO029L3
  2: barcode LTO017L3
  3: barcode LTO006L3
  4: barcode LTO005L3
  5: barcode LTO027L3
  6: LTO010L3 barcode
  7: barcode LTO004L3
  8: barcode LTO001L3
  9: barcode LTO003L3
  10: barcode LTO028L3
  11: barcode LTO030L3
  12: barcode LTO024L3
  13: barcode LTO026L3
  14: barcode LTO011L3
  15: barcode LTO012L3
  16: barcode LTO009L3
  17: barcode LTO020L3
  18: barcode LTO002L3
  19: barcode LTO008L3
  20: barcode LTO007L3
  21: barcode LTO016L3
  22: LTO019L3 bar code
  23: barcode LTO018L3
  24: barcode LTO022L3
  25: barcode LTO023L3
  26: barcode LTO025L3
  27: barcode LTO021L3
  28: barcode LTO014L3
  29: barcode LTO015L3
  30: barcode LTO013L3
  OB > unlabelv reader1-d-f 1
  Error: could not open file backup image dbsora17: / dev/sg0: undefined error (NDMP client)
  OB > pingh dbsora17
  dbsora17 (address 10.159.4.117): Oracle Secure Backup and NDMP services are available
  OB > scalar pingd
  Error: cannot open library scalar - undefined error
  Error: could not open the reader1 - error undefined drive
  Error: could not open the player lecteur2 - undefined error
  
  
  
  
  I have following configuration for SecureBackup:
  
  -----
  OB > lsh
  dbsora98 admin, mediaserver, customer service (via OB)
  dbsora17 mediaserver, customer service (via OB)
  customer (via OB) dbsora90 in service
  customer (via OB) dbsora92 in service
  customer (via OB) dbsora94 in service
  ...
  -----
  OB > lsd
  scalars in the library service
  reader1 disc 1 in service
  Player 2 lecteur2 in service
  Library vl_cbs3 in service
  disk 1 vd_cbs3_1 in service
  Player 2 vd_cbs3_2 in service
  ...
  -----
  OB > lsd - lvg
  scalar:
  Device type: library
  Model: [No]
  Serial number: ADICA0C0486A17_LLA
  In service: Yes
  Debug mode: no
  Barcode reader: default (selected material)
  Barcode required: no
  Auto clean: no
  Cleanup interval: (undefined)
  Clean using voids: no
  Unloading required: Yes
  Ejection type: auto
  Volume write-on min: 0
  UUID: 8c28a2c0-05eb-102e-8523-000b5df3a54e
  Annex 1:
  Host: dbsora17
  Raw device: / dev/sg2
  Connection type: SCSI
  Data from the survey:
  Seller: ADIC
  Product: Scalar i500
  Firmware: 320G
  Serial number: ADICA0C0486A17_LLA
  Account / address:
  1 mte: 1
  to 30: 4096-4125
  EEI 6: 16-21
  DTE 2: 256-257
  Moves:
  From mte, in: mte 0 to 1 EEI 1 dte 0
  Of course, to: mte 0 to 1 EEI 1 dte 1
  Of the iee to: mte 0 to 1 EEI 1 dte 1
  DTE, at: mte 0 to 1 EEI 1 dte 1
  Ok_ops: move = 1, reserve = 1 sense_dev = 1 sense_ele = 1 unload_any = 1, sense_dev_range = 1
  Characteristics of the device: two_d = 0, is_120 = 0, fake_mte = 0, fake_iee = 0, one_target = 0
  State of the barcode reader: present
  Display: none
  DTE 1: target 1 lun * reader1 (gross/dev/sg0 device name)
  WARNING: dte 1 may be misconfigured. (bus 0) is to target 0, lun 5,.
  which does not match the information provided by the library.
  DTE 2: target 2 LUNs * lecteur2 name (device gross/dev/sg1)
  WARNING: dte 2 may be misconfigured. (bus 0) is to target 0, lun 5,.
  which does not match the information provided by the library.
  WARNING: bus info unknown or not installed in car
  reader1:
  Device type: Ribbon
  Model: [No]
  Serial number: 1210151292
  In service: Yes
  Library: scalar
  DTE: 1
  Automount: Yes
  Error rate: 8
  Frequency of application: 131072 KB (134217728 bytes) (from driver)
  Debug mode: no
  Blocking factor: (default)
  Blocking max factor: (default)
  The current band: [unknown]
  Use the list: all the
  In-car use: no
  Cleaning required: no
  UUID: b9b3adca-05eb-102e-8523-000b5df3a54e
  Annex 1:
  Host: dbsora17
  Raw device: / dev/sg0
  Connection type: SCSI
  Data from the survey:
  Vendor: IBM
  Product: ULTRIUM-TD3
  Firmware: 64 0
  Serial number: 1210151292
  Band status: offline
  Hardware compression: on
  Last reading was: uncompressed
  Hardware encryption: not available
  Maximum block size: 1048576
  lecteur2:
  Device type: Ribbon
  Model: [No]
  Serial number: 1210206701
  In service: Yes
  Library: scalar
  DTE: 2
  Automount: Yes
  Error rate: 8
  Frequency of application: 131072 KB (134217728 bytes) (from driver)
  Debug mode: no
  Blocking factor: (default)
  Blocking max factor: (default)
  The current band: [unknown]
  Use the list: all the
  In-car use: no
  Cleaning required: no
  UUID: f6f3578a-05eb-102e-8523-000b5df3a54e
  Annex 1:
  Host: dbsora17
  Raw device: / dev/sg1
  Connection type: SCSI
  Data from the survey:
  Vendor: IBM
  Product: ULTRIUM-TD3
  Firmware: 64 0
  Serial number: 1210206701
  Band status: offline
  Hardware compression: on
  Last reading was: uncompressed
  Hardware encryption: not available
  Maximum block size: 1048576
  vl_cbs3:
  Device type: library (virtual)
  Model: [No]
  Serial number: ffd1f914
  In service: Yes
  Debug mode: no
  Barcode reader: default (selected material)
  Barcode required: no
  Auto clean: no
  Cleanup interval: (undefined)
  Clean using voids: no
  Ejection type: auto
  Volume write-on min: 0
  UUID: 9723c63c-1379-102e-871c-000b5df3a54e
  Annex 1:
  Host: dbsora98
  Raw device: / oracle/data/osb/cbs3/vl_cbs3
  Connection type: SCSI
  Data from the survey:
  Seller: Oracle
  Product: VL - 1
  Firmware: 2.0
  Serial number: ffd1f914
  Account / address:
  1 mte: 0
  is 99: 4096-4194
  EEI 0
  5 dte: 512-516
  Moves:
  Of mte, in: mte 0 dte of IED 0 be 0 0
  Of course, to: mte 0 to 1 EEI 1 dte 1
  Of the iee to: mte 0 to 1 EEI 1 dte 1
  DTE, at: mte 0 to 1 EEI 1 dte 1
  Ok_ops: move = 1, reserve = 1 sense_dev = 1 sense_ele = 1 unload_any = 1, sense_dev_range = 1
  Characteristics of the device: two_d = 0, is_120 = 0, fake_mte = 0, fake_iee = 0, one_target = 0
  State of the barcode reader: present
  Display: none
  DTE 1: target * lun * name vd_cbs3_1 (/ oracle/data/osb/cbs3/vd_cbs3_1 of raw device name)
  DTE 2: target * lun * name vd_cbs3_2 (/ oracle/data/osb/cbs3/vd_cbs3_2 of raw device name)
  DTE 3: target * lun * name vd_cbs3_3 (/ oracle/data/osb/cbs3/vd_cbs3_3 of raw device name)
  DTE 4: target * lun * name vd_cbs3_4 (/ oracle/data/osb/cbs3/vd_cbs3_4 of raw device name)
  DTE 5: target * lun * name vd_cbs3_5 (/ oracle/data/osb/cbs3/vd_cbs3_5 of raw device name)
  vd_cbs3_1:
  Device type: (virtual) tape
  Model: [No]
  Serial number: ffd73bcc
  In service: Yes
  Library: vl_cbs3
  DTE: 1
  Automount: Yes
  Error rate: 8
  Frequency of application: 1024KB (1048576 bytes) (from driver)
  Debug mode: no
  Blocking factor: (default)
  Blocking max factor: (default)
  The current band: [unknown]
  Use the list: all the
  In-car use: 6 seconds
  Cleaning required: no
  UUID: bcf9d02c-1379-102e-871c-000b5df3a54e
  Annex 1:
  Host: dbsora98
  Raw device: / oracle/data/osb/cbs3/vd_cbs3_1
  Connection type: SCSI
  Data from the survey:
  Seller: Oracle
  Product: VT - 1
  Firmware: 1.1
  Serial number: ffd73bcc
  Band status: offline
  Hardware compression: off
  Last reading was: compressed
  Hardware encryption: not available
  Maximum block size: 2097152
  vd_cbs3_2:
  Device type: (virtual) tape
  Model: [No]
  Serial number: fffc725c
  In service: Yes
  Library: vl_cbs3
  DTE: 2
  Automount: Yes
  Error rate: 8
  Frequency of application: 1024KB (1048576 bytes) (from driver)
  Debug mode: no
  Blocking factor: (default)
  Blocking max factor: (default)
  The current band: [unknown]
  Use the list: all the
  In-car use: no
  Cleaning required: no
  UUID: bd1d73ce-1379-102e-871c-000b5df3a54e
  Annex 1:
  Host: dbsora98
  Raw device: / oracle/data/osb/cbs3/vd_cbs3_2
  Connection type: SCSI
  Data from the survey:
  Seller: Oracle
  Product: VT - 1
  Firmware: 1.1
  Serial number: fffc725c
  Band status: offline
  Hardware compression: off
  Last reading was: compressed
  Hardware encryption: not available
  Maximum block size: 2097152
  ...
  -----

  The virtual library, you have set is not like what that it is taken in charge, so that should be deleted.

  Certificate errors suggest a time synchronization problem, so I would check all systems use NTP and their time is just fine.

  Thank you

  Rich

• How can I enable the use of the LinkedIn work initiated for Firefox toolbar?

  I heard through a section of LinkedIn that job seekers can use this tool to the browser through Firefox for free, but I can't figure out how or where to locate and add it.

  Hmmm...

  "LinkedIn is no longer supports it LinkedIn Browser Toolbars." Because of this change, you will be no longer able to use the LinkedIn for Firefox or Internet Explorer toolbar. Please note that this change affects only toolbars in the browser. "We continue to support the Outlook Social Connector toolbar."

  Source: http://help.linkedin.com/app/answers/detail/a_id/315
  
  Last updated: 02/04/2012

• Authentication to the multi level in OAM - use authentication Plugin

  Hi all
  
  Please post your useful suggestion to reach the following requirement:
  
  The requirement must authenticate with username, password-I & II - password. To do this, so I need to customize the authentication form.
  I use OAM 10.1.4.3 wherein there is no auth plugin code example in the folder of the example mentioned in the developer's guide!
  
  So I try with the sample files available with OAM old version 10.1.4.1. There is a single file (makefile) DSP based window and I am working on Linux. Could someone help me to convert this file to a Linux compatible file?
  
  There is no clear instructions on customizing the authentication in the Dev guide scheme, so it will be great if someone could help me with this.
  
  See you soon,.
  Ashish

  Verification of authentication scheme - http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/b32420/v2authen.htm
  and for the creation of authorization plugins check - http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/e10355/authnapi.htm#BABJJFCE

  An example of authentication plugin is also present at-http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/e10355/authnapi.htm#BABFEAIA

  Create a makefile for linux should not be that difficult, here is an example of makefile you can use for your reference...

  #Make file for authentication and authorization plug-ins

  AUTHNAME auth =
  AUTH_SO_NAME = auth

  SRC_DIR =.
  Inclure_rep = include

  LIBNAME = auth.so
  SOURCES = auth.c
  OBJS = $(AUTH_SO_NAME) .o
  LIBS =

  INCLUDE_FLAGS = - I$ (INCLUDE_DIR)
  #ldflags case
  LD_FLAGS = - lodbc

  CC = gcc

  CC_CMD = $(CC) - D_REENTRANT
  LD_CMD = $(CC) - shared

  $(LIBNAME): $(OBJS)
  $(LD_CMD) $(OBJS) $(LD_FLAGS) o $@ $(LIBS)
  chmod + x $(LIBNAME)

  $(OBJS): $(SOURCES)
  $(CC_CMD) $(INCLUDE_FLAGS) $(CFLAGS) - c-o $@ $(SOURCES)

  clean:
  rm - rf $(OBJS) $(LIBNAME)

  #end

  Let me know if you need anything else, be it
  Sam

• BlackBerry Smartphones how can I turn on while Autotext as part of multi-tap?

  Shortly after the storm, I set my default keyboard to multi-tap. I absolutely loved because I had the classics 'counted' keyboard, but was still able to have Suretype capabilities due to the AutoText function (the storm is my first BlackBerry and I can't get used to the Suretype keyboard for the life of me).

  I don't know what I did today, but all of a sudden insertions disappeared and I have to spell words instead of just typing a few letters and by selecting the word. When I flip through this landscape, the AutoText works, but when I flip to portrait goes back to multi-tap. There is this weird icon in the top right corner that was never there before.

  I went to 'options' to ensure that the AutoText is enabled (which is).

  Does anyone know how to turn on automatic insertion in multi-tap mode?

  Any help would be appreciated!

  I have discovered to get predictive text in any mode, you must follow this convoluted path:

  Options > language > input Options > predictive input (check box).

  When you switch between the styles of keyboard in portrait mode, it somehow goes back to mulitap, even though the predictive text box is enabled. So, anytime he spends modes, here I'll uncheck the box, save, check again, save, then go back to the text.

  You must be in alphanumeric mode (or whatever mode you want) before you do, if that's where you want to use predictive text.

• BlackBerry Smartphones predictive multi tap...? It's there... then, it is not!

  Hi guys! I had the storm of last Saturday, couple of problems... batterylife and accelerometer sometimes sticks... ? someone else?
  Main reason why I posted this is because of input methods. Gold to my knowledge, there were three input method:
  QWERTY on the side
  SureType in portriat
  Multi-tap in portrait

  up until yesterday...
  the multitap function was predictive! like on my old nokia n95! I've been disappionted when I discovered that the blackberry was not this function, as it's my favorite style (can not get used to suretype)
  I was in the web browser when it happened! I closed the browser and was able to write a message with predictive multitap! stupidly, I turned back on it in suretype to see if I could find out how to turn on predictive multitap again...
  .. havnt been able to do since! I tried everything, I'm really good with phones, and I can't find it anywhere! called vodafone, has tried to find a helpline blackberry or something, I mean I was directed here, can someone please please tell me
  1. If I have come to the right place

  2. the technical assistance team blackberry GET back do you themselves
  3. If anyone knows how to get the storm to predictive multi tap if it was a problem? lol, its so sad, it's so important for me, but im a writer of great texter/message and information to get it to tap predictive multi would be noting less than golden. Thank you

  Ok

  my blackberry storm HAS t9 is currently working (NOT suretype! - t9 is 9 keys with predictive text - layout similar to multitap)

  These are the settings... - try this and it might work for... go you device options

  in entry options > predictive input enabled.

  spell check enabled

  Screen / KEYBOARD settings - keyboard mode portrait > multitap on

  I would like to know if you have any luck guy!

• How to turn on the Double Tap feature on the mouse pad!

  Good so I used to be able to double tap on the mouse pad, click and I accidentally turned off somehow and I can't for the life of me understand how to re-enable it. Help please!
  

  In most cases, the controls for it are in the start menu / Control Panel / mouse.  Where varies by manufacturer (computer and mouse) so I can't help you there that you have not provided this information, and even if you don't I probably just refer to manufacturers of assistance.  But before you go watch, read the next paragraph.

  But it turns out that there is another way to set this feature.  Here is the procedure:http://www.vistax64.com/tutorials/40246-single-click-option.html.  It is quite simple and does not involve all the controls of the mouse (and can be changed back as you wish).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Navigate with the Multi-voie/wave Q and temporal window

  Hi all

  I have a few questions:

  1. when I enter a time code in my time window SMPTE 23.976 fps to navigate, it doesn't go to the timecode as I entered. i.e.

  a 1002-> 41,18 entry. I see that if I get the colon it works correctly. Is there a setting I can change if I don't have to enter the colon? Also, is there a keyboard shortcut for me to be able to quickly enter a timecode?

  2. I want to Pitch Bend a clip I have in my multitrack. I would like to be able to open the clip in the track in the waveform of the multi - mode and have the waveform open only the part of the clip used in the multitrack session. This is so I can understand exactly where I am in the clip and time pitch curve. How can I do this? Essentially, I want to open the waveform and the clip outside what is currently in multiple ways.

  Thank you!

  As Charles says if you double-click the clip in multitrack view, she must just open zoomed in to this part of the file in the waveform display. But make sure you have "Synchronize playhead etc and zoom level selection" option enabled in the preferences/general.

  But I think that the suggestion that Charles to convert in single copy would be preferable because it would leave your original audio intact without pitch change if you need to return later to change anything.

  The other option that might work for you, depending on how much bend you have to do is insert the Pitch Shifter in the effects Rack. Then, you can use Automation tracks to add keyframes on the envelope of Ratio to transpose to the pitch curve on the fly.

• I lost the most views drop-down list under the search bar, it used several times in the same session, and then he just disappeared.

  The drop-down list is / was my part used of any page, use it to access to everything I need. The only other thing I noticed changed it's new green bottom-tab at the top of each page: site Web Safe/number of trackers. I can't get rid of it. Avira virus control icon is on my desktop, but the icon also suddenly appeared on the right side of the search bar. I deleted it because I have it on the desktop. I have no why he appeared suddenly. It is my 3rd session today. I had not changed anything in previous sessions, so don't know why the drop down menu has disappeared.

  Any help appreciated.
  HK

  Hi, hopefully a screenshot can make things more clear - when you right click in the area of the red dot, then a popup menu will appear where you can re-enable the toolbar of bookmarks.

• NB - how to activate the multi gesture?

  Hello world.

  When I unboxed the laptop and turn it on the first time, multi gestures functionality worked well...

  Although I can turns off this feature because no longer works.

  How can I enable this feature again?

  Cheers!

  Hi dinistic,

  Can you tell us what laptop you have exactly?

  The function of the multi gesture has something to do with touchpad have you checked if multi-function gesture is enabled in the driver for the touchpad? You can check in Control Panel > mouse > advanced

  In the worst cases, need not to reinstall the driver touchpad but that s no problem I think Isn t it? ;)

• Satellite Pro A200 - 1 MI: how to re-enable the touchpad

  Hello

  I recently bought a new Satellite Pro A200 - 1 MI (psae7e). Thing is that while I was using it at the start there was this allocation at the beginning which allowed us to use the shortcut keyboard (fn + keys) on the screen.
  It was at the top of the screen.

  So I clicked on the tab to disable my touchpad but now I can't seem to activate the touchpad and accidentally closed this keyboard shortcut help too.

  So all tried to re-enable the touchpad; reinstalled driver, tried to install the touchpad power and everything...

  Please help me.
  If there are questions to ask...
  I really hope that someone could find an answer for me.

  Thanks in advance,
  Sabil

  Hello Sabil

  You can restart Flash cards: start > all programs > Toshiba > utilities > settings for Flash cards. Open these settings and clear the check box in front of the option to disable.
  I hope that you will be able to use Flash cards again.