Use the CHECKIN_NEW function in the browser url

Similar Questions

• Open Enterprise Manager using the browser on Oracle Linux

  I installed Oracle 10 g Release 2 on Oracle Enterprise (version of Enterprise Linux AS 4 (October 7 update)).
  
  I started the listener and enterprise manager using emctl start dbconsole command successfully.
  
  As I am new to linux, I don't know how to open the url EM Linux.
  
  What browser should I use (exact version that is compatible with the version of Enterprise Linux AS 4 (October update 7).) How do I install the browser and open enterprise manager using the browser.
  I don't even know if any browser is installed during the installation of linux. How can I check if any browser installed or not?

  No one can guess what you have installed or how you have configured your system or the installation of Oracle. The default browser for Oracle Linux 4 is Konqueror, which is not compatible with the MS Oracle dbconsole.

  You might want to try the following:

  Open a Terminal command prompt (System Applications/tools) and enter the following command:

  
  
  su - root
  
  cd /etc/yum.repos.d
  
  wget http://public-yum.oracle.com/public-yum-el4.repo
  
  yum -y install firefox
  
  

  To open a Firefox browser window, open the Web icon in the Menu, next to the Actions or the Applications/Internet or type firefox in an X 11 terminal window.

  The default URL for the dbconsole EM is:

  http://hostname_or_ip:5500 / em

• 37 of Firefox crashes when you use the browser of peacekeeper test

  Hi guys, I've updated my browser Firefox 37 and it crashes on me whenever I use the browser of peacekeeper test. I had no problem using the website in the past. Whenever I update my browser I have run the test to compare previous results as well as compare results with Google Chrome.

  It works very well with chrome, but crashes 2 minutes FF37 test. I tried to run in Mode safe as well, but it still crashes. My plug-ins are up to date and I tried a refresh as well. I don't have any other applications while running the test, just the browser was opened with a tab. I am running Windows 7.

  This is the website of guardian of peace: http://peacekeeper.futuremark.com/

  I sent the Mozilla Crash Reporter.

  Appreciate your help... Thanks in advance!

  Edit: included peacekeeping Web site.

  Hi @user293, @jscher2000 , and @cor-el, thanks a lot for your comments and help with this question, I've had. I tried to disable WebGL and ran to guardian of peace, and it worked well. There is no crash.

  How to disable WebGL: [https://support.mozilla.org/en-US/kb/upgrade-graphics-drivers-use-hardwar...]

  I guess now disabled shouldn't really pose a problem for me? When the new version of Firefox was released in may, I'll turn on WebGL and see if this problem has been resolved.

  Thanks again for your help guys... it is very appreciated!

  Edit: help link included for deactivation WebGL

• It will work with an iPad, and it let me not use the browser on the iPad?

  It will work on an iPad, and I'll always be able to use the browser on the iPad?

  Hello:

  Please understand that Firefox is NOT available for iOS (iPhone, iPad, iPod Touch), Windows Phone, Windows RT, Bada, Symbian, Blackberry OS, webOS, Android - x 86 or other mobile operating systems:

  For more details, see Firefox will work on my Mobile device .

  Thank you.

• If I should not be able to use the browser while on the phone?

  When im on a call and try to use the browser it says I have no data connection. Is this normal?

  If you are on any other network then 3g yes it is. Edge and GPRS have not the ability to talk and surf at the same time.

• How can I customize the toolbar when you use the browser of the attribute

  In CVI 2012, changes in the toolbar depending on the environment, for example, it is different to the source window and the user interface editor. The toolbar can be customized using the Options menu / toolbar...

  Unfortunately, when you use the browser of the attribute of the user interface editor, another toolbar is displayed, i.e. not the UI Editor toolbar... I would have assumed that the browser of the attribute belongs to the user interface editor, obviously this isn't... So, how can I customize the toolbar when you use the browser of the attribute?

  
  

• Using the browser as a front end for an application

  I'm still relatively new to this Yes, you can forgive any missteps.

  I'm developing an application that needs to use the browser as its user interface. I want to capture all requests from the browser content and their service myself in the application.

  Is browser.field the only way to do it? I would have preferred using the API generic as much as possible.

  I built the BrowserFieldSampleApplication of JDE 4.2.1 with Netbeans, but I can't make it work. I copy the cod on the device, but it doesn't appear anywhere I have the same problem with the Simulator.

  Any help much appreciated.

  I gave up trying to get this to work because I was not really interested in using a HTTPConnection.

  Thanks for your help anyway.

• Cannot use the browser Simulator

  It's weird. Ago, I installed a simulator of 9000 "BOLD" (4.6.0.126) and have been running and fine Eclipse debugging very well. Today, when I run the Simulator and try to establish a connection through the browser to test an OTA installation, I get an alert: "this is a Wi - Fi service. Please make sure that your device is equipped with an active WiFi connection and try again. "The MDS Simulator is running. I can't connect to any website at all (BlackBerry bookmarks, Google, etc.) with the browser.

  I tried fiddling with mobile phones and wireless networks options ad nauseam. I have re-installed the Simulator. I rebooted my machine. Without success. Other simulators seem to work fine (I can connect using the browser through MDS). It is just this "BOLD" simulator which seems to have problems.

  Any suggestions on how to fix it?

  Two suggestions:

  (a) start the WiFi on the device.  Just use the management of connections, Set Up WiFi and let the search - he wall find a default WiFi Service

  (b) check the default browser.  Options of--> advances... _ the browser.  Make sure that it is browser or BlackBerry Browser and not the HotSpot browser.

  Sounds like you just switched to Hotspot browser by default.  However, I tried just that myself and do not see the same symptoms.  So maybe not.  But anyway give it a try.

• BlackBerry Smartphones battery goes dead when making phone calls or using the browser wireless

  Battery goes dead within seconds when the phone calls or using the browser wireless - software is a newer version of 6.0

  What is fix - camera works fine when text - another that this battery will die almost instantly - and the back of the phone generates heat so

  I've been running a new battery for a week - looks as good as new - thank you for your help

• Emails from blackBerry Smartphones don't automatically get pushed to my curve. Only when I use the browser.

  Yesterday, I posted my emails from my hotmail account seem to come in batches to my Curve 8330. Someone suggested that the problem was due to MS Messenger running on my computer. That makes sense, so I considered resolved thread. Unfortunately, the same thing occurs still even after I Quit Messenger. Now I realize that my e-mails only get pushed to my BB, when I use the browser on my phone. Is there a setting I can adjust?

  Thank you!

  In situations of this kind, it would be useful to post again this same thread, so that we can follow the previous suggestions.

  However, do the following on your BlackBerry:

  1. options > advanced > host Routing Table > Menu > register.

  2 send your service from your carrier's BIS site books.
  http://www.BlackBerryFAQ.com/index.php/Where_can_I_log_into_my_BIS_account%3F

  3. with the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart

  4. dial * 228 on your device.

• BlackBerry Smartphones-error message when you use the browser

  My Blackberry Storm began to display: error occurred during parsing XML: Expecting '; '.  When I go to the browser.  No idea how to eliminate this error message every time I use the browser?

  Error message went away by itself (a day after my post).  Thanks for the posts.

• BlackBerry smartphones can not access the Internet using the browser

  Problems tonite to access the Internet using the browser button... get several different messages, the first was:

  ERROR HTTP 500 internal server error... An unexpected condition has occurred...

  then ERROR HTTP 503... server overload

  I can't access using Menu.then by clicking on the bookmarks saved... any ideas anyone?

  Hi and welcome to the forums!

  Open the browser, options, cache operations, delete all categories.

  The go to the configuration of the browser, scroll to the identification of the browser, change Internet explore!

  Battery pull. See how it works.

  KB11266 HTTP 500 error when you use the browser

  Thank you

  Bifocals

• Generate class files using the WSDL url and wsimport

  I am trying to create a java application that hits the service exposed by hub.

  To create the application in java, I'm generating class files using the WSDL that is created and exposed by the hub.

  Executed steps:

  1 created an application in OPA.

  2. deployed on the hub (usinf deploy option of snapshot on Policy Modeling)

  3. in the deployment tab, I see the request and get the url of the wsdl by clicking on it.

  I try on this wsdl wsimport command. But it gives me following error messages.

  ---------------------------------------------------------------------------------------------------

  C:\***\AllFiles > wsimport http://localhost:7001/hub/determinations-Server/assess/SOAP/generic/12.2/AttemptOne?WSDL

  the analysis of WSDL...

  [ERROR] invalid WSDL http://localhost:7001/hub/determinations-Server/assess/SOAP/generic/12.2/AttemptOne?WSDL , expected {http://schemas.xmlsoap.org/wsdl/} html (line 2) data definitions

  Cannot read the WSDL document: ( http://localhost:7001/Hub/determinations-Server/assess/SOAP/Generic/12.2/AttemptOne?WSDL , because 1) did not find the document. (/ 2) the document could not be read. (3) the element the document root is not < wsdl:definitions >.

  [ERROR] WSDL:service is not found in the WSDL (s) provided:

  At least a WSDL with definition of at least one service must be provided.

  Unable to parse the WSDL file.

  ---------------------------------------------------------------------------------------------------

  If I store the wsdl file in a file on my local computer, and then run wsimport, it generates the classes very well.

  Can someone provide me with a way that I can generate the classes using the wsdl url and not the local file?

  Also, do I need to create a connection in the Connections tab on the hub?

  Thanks in advance.

  -Alain

  Looks like you could run in the user authentication when wsimport runs against the WSDL. Instead of the WSDL, its reception, the login page.

  The best way to work around this problem is perhaps what you do already - to obtain the wsdl and save them in a file.

  Another solution is to disable the restriction of connection to the Web Service API. You can do this in the menu on the users page (admin role can turn on and off.

  You can switch between a user and a password with the call of the WSDL file, but I don't know if its possible to do with wsimport

  See you soon

  Frank

• Use for a PS file browser now? I'm used to use the browser file on CS1

  Use for a PS file browser now? I'm used to use the browser file on CS1

  New versions of Photoshop comes with Adobe Bridge to organize image files.  However you are not required to use it.  You can also use LightRoom or system utility such as Windows File Explorer and the Mac Finder.  Photoshop itself uses system dialog boxes to access your files from file systems.   When Photoshop displays a beautiful or save dialog for you in all likelihood, it is a Windows or Mac system dialog box.  Versions of Photoshop can also have some internal dialogues of programmed by Adobe Photoshop to access your systems file systems.

• Load modules using the moduleLoader url property?

  My requirement is to load a module by using the following URL

  "' somthing.swf? a = b and b = c"

  It can load the module and put some values after it is loaded. But when I create an instance of the moduleLoader and set the Url property does nothing. My code is as follows

                          url += constructUrl()+"?"; // something like 'modules/vst/visitModule.swf' will be returned
                 
                 if(_modLoader){
                      _modLoader.addEventListener(ModuleEvent.READY,readyMod);
                      _modLoader.addEventListener(ModuleEvent.ERROR,loadError);
                      _modLoader.addEventListener(ModuleEvent.PROGRESS,loadProgress);
                      _modLoader.addEventListener(ModuleEvent.UNLOAD,unload);
                      _modLoader.applicationDomain = ApplicationDomain.currentDomain;                    
                      _modLoader.url = url;
                           }
  

  Do you think something wrong here? I'm using Flex 3.2.

  I read in the forum below to the http://forum.springsource.org/archive/index.php/t-65228.html solution but could not operate. Yet to try.

  Thank you

  Well yew statement protecting the loadModule() call looks like this:

  If (_url! = null & loadRequested)
  loadModule();

  Assuing url is not null, loadRequested must be false. This seems to indicate that you do not have ModuleLoader declared in a mxml file. The ModuleLoader created using actionscript? If so, you must call loadModule().

  -Darrell