Use the function without FN keys?

Similar Questions

• I want the single update query without using the function.

  I want to update sells_table selling_code field with product_code date product table max.
  In the product table, there are several product_code date wise.
  
  I did with below charly with the use of the service, but we can do in the query what a single update
  without using the function.
  
  UPDATE sells_table
  SET selling_code = MAXDATEPRODUCT (ctd_vpk_product_code)
  WHERE NVL(update_product_flag,0) = 0;
  
  (P_product IN VARCHAR2) RETURN of HVL.maxdateproduct NUMBER FUNCTION to CREATE or REPLACE
  IS
  max_date_product VARCHAR2 (100);
  BEGIN
  BEGIN
  SELECT NVL (TRIM (product_code), 0)
  IN max_date_product
  FROM (SELECT product_code, xref_end_dt)
  PRODUCT
  WHERE TO_NUMBER (p_product) = pr.item_id
  ORDER BY xref_end_dt DESC)
  WHERE ROWNUM = 1; -He'll be back a single line - max date product code
  EXCEPTION
  WHILE OTHERS
  THEN
  RETURN 0;
  END;
  
  RETURN max_date_product;
  
  END maxdateproduct;
  
  Thanks in advance.

  Hello

  Something like that.

  update setlls_table st
          set selling_code =(select nvl(trim(product_code)) from
                                (select product_code
                                        , rank() over (partition by item_id order by xref_end_dt DESC) rn
                                     from product
                                 ) pr
                                 where rn =1
                                       and pr.item_id = st.ctd_vpk_product_code
                             ) where NVL(update_product_flag,0) = 0 ;
  

  That such is not tested due to lack of sampling input.

  Concerning
  Anurag Tibrewal.

• Using the function to retrieve several data

  using the function recover data of the hre_date and name of entry where are employee_id = 100. kindly give a query in PLSQL

  Padma... wrote:
  Hello

  create or replace function f1 (a number, b out varchar2) return date
  is
  c the date;
  Start
  Select last_name, hire_date b, c of the employees where employee_id = a;
  return c;
  end;
  /
  declare
  name varchar2 (30);
  Start
  dbms_output.put_line (f1(100, name));
  dbms_output.put_line (Name);
  end;

  Thank you
  Padma...

  Agree with Marwim, using OUT parameters is very bad practice.

  Something would be more appropriate...

  SQL> create or replace function get_emp(empno in number) return sys_refcursor is
    2    rc sys_refcursor;
    3  begin
    4    open rc for 'select hiredate, ename from emp where empno = :1' using empno;
    5    return rc;
    6  end;
    7  /
  
  Function created.
  
  SQL> var rc refcursor;
  SQL> exec :rc := get_emp(7788);
  
  PL/SQL procedure successfully completed.
  
  SQL> print rc
  
  HIREDATE             ENAME
  -------------------- ----------
  19-APR-1987 00:00:00 SCOTT
  
  SQL>
  

  If the customer requires a Ref cursor returned with data, otherwise a registration type / adapted collection could be returned and the integrated data to the that, although in general the collection of data in memory and the passage on the procedures is not the most ideal because it takes up resources such as memory of the PGA.
  Without special requirements, it is impossible to give a precise answer.

• How to add the warning message when you use the function 'print' in Adobe LiveCycle Designer

  I'm trying to make the pdf document for my business that requires the addition of a warning message while everyone to use the function 'print' page...

  Does anyone know how to add the warning message about LiveCycle Designer

  Also my supervisor mentioned something using "nag" If that sounds at all

  Not in the XML code, in the case of script of pre-publication of the "print" key. If you don't have the script editor to the top on your version of designer, you can press ctrl + shift + F5 to bring it.

• Binds the function of a key on the keyboard for a button of the application

  Is it possible to link the function with a key press of a button clicked in a flex/air application?

  The reason I ask is that my request will be placed on a Linux system, but the guy who owns this system has a program on the desktop that is bound to the F10 key sense whenever you press F10 this program is open. He wants to be able to make it's move from the application of this program from the application itself, while maintaining my created application open in the background.

  The problem is that this system will soon be operated by remote control there will be no F1-12 keys avaiable some letters and numbers. So what I have to do is create a button which when clicked operates the F10 key. The idea is that the user can switch between this program and the interface without actually seeing the Office at all. Is this possible?

  Is so how could it be applied to this button in the following code? :-

  <? XML version = "1.0" encoding = "utf-8"? >

  < mx:WindowedApplication

  ' xmlns:mx = ' http://www.Adobe.com/2006/MXML "layout =" " absolute "

  >

  < mx:Button id = 'switch' " horizontalCenter =" 0 "red =' 0 " label =" switch " " "

  / >

  < / mx:WindowedApplication >

  I think Javascript might have the same problem, but perhaps mean you Java (two totally different animals).

  You need the java.awt.Robot class. The keyPress() method will simulate a keypress.

  You can probably find it fairly fast.

  If this post answers your question or assistance, please mark it as such.

• I have an iMac 27' 2012 with macOS Sierra and Apple Watch with watch OS 3, I can use the function "Log?" in Apple Watch

  I have an iMac 27' 2012 with macOS Sierra and Apple Watch with watch OS 3, I can use the function "Log?" in Apple Watch

  Hi John 2078 Tito.

  I understand that you have updated your iMac and Apple Watch and now you're curious about unlock your iMac using your Apple Watch. I know that it is a nice feature to be able to quickly and safely unlock your computer, so I'm happy to help you.

  This feature is available on 2013 iMacs and later versions, which means that your iMac won't be compatible. You can see more info on this feature here:
  Unlock your Mac with Apple Watch - Apple Watch user's Guide

  Thank you for using communities Support from Apple. See you soon!

• I have been using the functionality of Firefox in which I could have multiple sets of tabs open, but only see the game I was working with. I have updated and now the functionality is Gone

  I have been using the functionality of Firefox in which I could have multiple sets of tabs open, but only see the game I was working with. I have updated and now the feature disappeared. I had a small icon on the top right of my toolbar. I used it all the time to keep windows separated for financial, plans to travel items, news, etc.. Has it been removed from Firefox?

  Hello

  The feature of tab groups is always present. You can try with the button right of the + after the last tab and Customize. If the icon is hidden behind the other, or if it is available inside the mini window customize, you can put it back. If the problem persists, you can also try of reset toolbars and controls: and start to make changes and restart in Safe Mode screen.

• Using the functionality of Panorama on the DSC - H55

  What is the best technique to use the functionality of panorama Cybershot DSC - H55, press and hold down the button while slowly following the arrow or press and release the button? Move from L to R very slowly or quickly?

  HI, you have limited play with the speed as you move the camera a little to get used to the speed. I know it sounds strange, but it takes a little getting used to for you to know how fast to move it to. If you move too slow or too fast, you will not receive either the scene or the camera will tell you to slow down. If you can't move the camera through any matter within the time limit, a grey zone occurs in the composite image. In this case, go faster the camera to record a complete panoramic image.

  To take the panorama photo, you can press the button all the way down and release, then move the camera in the direction of the arrow. The camera records for about 7 seconds.

• Cannot use the functions F1-12 on my Satellite C55 - A - 19 K

  Hello

  Satellite C55 - A - 19 K have a keyboard drivers?
  I cannot use the functions F1-12 and can not get the wireless since it s on the keyboard...
  Any 1 can help please?

  This function is not controlled by the driver keyboard, but with utilities and tools specific to Toshiba.
  What operating system do you use?

• Hello.  Y at - it a means or an application to stop locking the screen EXTREMELY annoying on the Apple Watch.  It's clearly a myopic element for the Apple team because I can't even use the timer without being incredibly bored.  Thank you.

  Hello.  Y at - it a means or an application to stop locking the screen EXTREMELY annoying on the Apple Watch.  It's clearly a myopic element for the Apple team because I can't even use the timer without being incredibly bored.  Thank you.

  Hello

  You can enable the detection of wrist as well as an access code and unlock it with the iPhone:

  • On your iPhone, in the application of the watch, go to: My Watch (low left tab) > General > wrist Detection - this turns on.
  • On your iPhone, in the application of the watch, go to: Watch My > Passcode > Passcode turn on (choose a Simple 4 digit access code or a longer).
    • Also in the password settings screen, select Unlock with iPhone.

  After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually or unlock your iPhone. Then, it will remain unlocked until you delete the monitoring of your wrist, when that it locks automatically.

  You can also set your watch to the screen to reactivate automatically when you lift your wrist, even select what is displayed on the screen to wake up:

  • On your iPhone, in the application of the watch, go to: Watch My > General > screen Wake:
    • Active screen Wake on revival of wrist, and;
    • Choose if the watch should resume last activity or see the Face of the watch.

• I use Windows 10 and use the Canon SX20 IS. How to use the function of Photo stich?

  I use Windows 10 and use the Canon SX20 IS. How to use the function of Photo stich?

  Is it possible to get the procedure to use feature stich photo?

  Will be Zoombrowser EX for windows 10 wotk?

  If any expert can guide me... that will be great.

  Hi Sat17,

  Thank you for your inquiry.

  For Windows 8 and beyond, ZoomBrowser EX has been replaced by EX. ImageBrowser

  Your software you will need to updated for Windows 10.

  You can access the software for your camera by clicking here.  Once on our site, scroll down to "Drivers and downloads", then use the drop down menu to choose "8.1 Windows" or "Windows 8.1 (x 64)".»  Your camera software has not been updated for Windows 10, but for Windows 8.1 software will run on your computer.

  To update your software, click the [Select] button to the right, then click on "How to download and install" for installation instructions.

• I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  Hi ddbowers01,

  The other shortcut keys work?

  Try pressing CTRL + ALT + DELETE and then try to lock the computer and check.

  Check the setting below:

  a. in the Control Panel, click user accounts.

  b. click on change the way users log on or off the power.

  c. Click to uncheck use the screen of welcome for a quick and easy connection.

  d. click OK.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can install windows 7 using the windows vista product key?

  I can install windows 7 using the windows vista product key?

  I can install windows 7 using the windows vista product key?

  Hey angelside

  None

  You cannot install windows 7 using the vista product key

  You can buy windows 7 and then you will get the own product key windows 7 install

  read the windows 7 price microsoft below link

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  Walter, the time zone traveller

• Use the Express Upgrade product key to Windows 7 Edition upgrade Home premium to Windows 7 Professional.

  Original title: Win7 pro anytime upgrade/Win XPmode.

  I just installed Win7 64 bit Home Premium (Retail) on a new PC.

  There are a few applications that works properly (or at all) on the new Win7 64 bit PC. (they ran OK on win7/32 and XP/32)

  I wanted to try and install on win7/64 PC XPMODE and run these applications from there, when I tried to install XPmode on the win7/64 home premium, the only choice who would have even tried to install was Win XPmode 64 bit (but of course, all this was doomed to failure because XPmode requires Win7 Pro).

  I have a 32 bit (Retail) win7 which has been upgraded with anytime upgrade to Win7 Pro.

  Can I use the Anytime Upgrade prod. key at least temporarily (I know that this license is for 1 PC ONLY) update the new Win7/64 Win7 Pro, install XPmode 64 bit to see if these applications will run on a 64-bit XP?

  If it works I'll tell you how to disable the worm on the old PC Pro and use it on the new PC.

  DRM for any help

  Hachiko

  Hello Jerry,.

  Thanks for the quick response.

  Yes, you can install the 64-bit applications and also compatible with the version of Windows you have.

  You can also check out the article below and see if that helps.

  Understanding hardware and software for 64-bit Windows

  () See: 32-bit programs on a 64 bit version of Windows ()

  http://Windows.Microsoft.com/en-us/Windows7/understanding-hardware-and-software-for-64-bit-Windows

  Please do not hesitate to write us again for assistance and we will be happy to help you come.

• is it possible to install a 64-bit version and use the 32-bit license key?

  Hi, I'm Gian Carlo. I bought and activated a windows 7 pro 32 bit version, in fact, I need Windows 7 pro 64-bit version. so is it possible to install a 64-bit version and use the 32-bit license key? is it valid? I tried but its key invalid showing... I heard 32 bit or 64 bit again we can select one with the same key... is this true? How to do? Please help me up... Thank you...

  Hi, I'm Gian Carlo. I bought and activated a windows 7 pro 32 bit version, in fact, I need Windows 7 pro 64-bit version. so is it possible to install a 64-bit version and use the 32-bit license key? is it valid? I tried but its key invalid showing... I heard 32 bit or 64 bit again we can select one with the same key... is this true? How to do? Please help me up... Thank you...

  As long as they are the same edition, Yes, you can use the same product key to install the 64 bit version of Windows 7 Professional.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us