Use the OAF page and Workflow:

Similar Questions

• R12.2.4 data lost after using the dialog Page and return to the calling page. (Help please!)

  Hi team,

  I'm new to OAF and works on a requirement to add some custom validation when the user clicks a button in a seeded standard page.

  The approach I took was to extend the seeded controller object managed this press event button and put my custom logic in the extended controller and substitute the standard controller through customization.

  The standard rate which was pressing the Complete button A Page, the user was taken to the next and epepinee page (Page B) some operations based on records that have been chosen Page A.

  Part of the custom validation requirement that was if some postings were not met, the user must be a pop-up asking if they really wanted to move forward and if they have selected Yes then continue with the seeded standard flow (transition to page B) and if they have NOT selected then just remain on the current page.

  I have used OADialogPage and to do this, in part, the question , I am running into is that when the user selects one or more records using a check box in a region of several record (table) and click the full page and if the validation fails then a modal page and the user made a selection i.e.either Yes or no modal page and when they return to the calling page (ex. Page A), all data (records) they chose previously is lost (the Page is refreshed). Based on what I see on this forum, I suspect it's because after having click Yes on the modal page and then return to the original page the processRequest fires again and the VO data is queried again and has all the parts on the page are lost. Since I am changing the flow in seedlings pages based on the intervention of the user I'm confused as to how this problem can be solved. that is, prevent the page refreshes or preserve the selections that were made before you navigate to modal page. Any help is really appreciated!

  My Code:

  ' Public Sub processFormRequest (OAPageContext oapagecontext, OAWebBean oawebbean)

  ...

  ...

  If (oapagecontext.getParameter ("completeOps")! = null) {}

  ...

  ...

  If (warnCount > 0) {}

  OAException message = new OAException ("not in order...", OAException.WARNING);

  oapagecontext.putDialogMessage (message);

  OAException message = new OAException ("XYZ Violated rule. Do you want to continue? ", OAException.WARNING);

  DialogPage OADialogPage = new OADialogPage (OAException.WARNING, message, null, "","");

  String Yes = oapagecontext.getMessage ("AK", "FWK_TBX_T_YES", null);

  String number = oapagecontext.getMessage ("AK", "FWK_TBX_T_NO", null);

  dialogPage.setOkButtonItemName ("ConYesButton");

  dialogPage.setNoButtonItemName ("ConNoButton");

  dialogPage.setOkButtonToPost (true);

  dialogPage.setNoButtonToPost (true);

  dialogPage.setPostToCallingPage (true);

  dialogPage.setOkButtonLabel (yes);

  dialogPage.setNoButtonLabel (no);

  oapagecontext.redirectToDialogPage (dialogPage);

  }

  If (oapagecontext.getParameter ("ConYesButton")! = null) {}

  Write Yes button Action code

  oapagecontext.putParameter ("completeOps", "Continue");

  }

  If (oapagecontext.getParameter ("ConNoButton")! = null) {}

  Write the code of the Action for the No button

  Dim errormsg = ' rule Violations have occurred. "

  throw new OAException (errormsg);

  }

  super.processFormRequest (oapagecontext, oawebbean);

  }

  I managed to work around this problem by adding a simple control in my controller processRequest method extended to avoid the call to super.processRequest incase lhen control returns to the page once the user has made a selection on the Page of the dialog box

  If ((oapagecontext. (GetParameter ("ConYesButton") == null) & (oapagecontext.getParameter ("ConNoButton") == null)) {}

  super.processRequest (oapagecontext, oawebbean);

  
  

  }

  
  

  Thank you!
  

• I WISH THAT ALL PAGES TO FIT ON MY SCREEN SO I CAN'T USE THE ARROW LEFT AND ARROW RIGHT! THANK YOU VERY MUCH FOR YOUR HELP!

  MY PAGES HAVE BEEN VERY WELL UNTIL I DOWNLOADED SOMETHING, I DON'T KNOW EXACTLY.   I THOUGHT I TRY TO DELETE WHAT I DOWNLOADED ARRIVE TO WHERE I WAS, BUT I DON'T THINK IT WORKED OR I DELETE ANYTHING!  SO I'M GOING TO STILL USE THE ARROW LEFT AND ARROW RIGHT TO VIEW ALL PAGES.  I WENT TO CONTROL PANEL, DISPLAY, SETTINGS, WENT TO A HIGH NUMBER TO THE PIXEL NUMBER LOW, CE WHICH WAS THE ONLY SOLUTION POSSIBLE, AND ALL GROW.  SO I PUT IT BACK TO THE LOT WHERE HE WAS!  DON'T KNOW WHAT TO DO, SO HERE I AM ASKING FOR HELP!  Thank you!!!  MY email * address email is removed from the privacy *.

  First remove everything you have installed, check if it works.

  In case of failure and then update the display on the computer drivers

• form using the trial version and it continues to repeat the information to a page (either first or last page) to all pages and deleted the contents entered in

  form using the trial version and he continues to repeat the information of a page (either first or last page) to all pages and remove the content that has been entered into.

  The fields with the same name will be the same content. You must change the names of the fields.

• What on Earth is the lego man ' click me ' on the home page, and why he doesn't something when I click on?

  What on Earth is the lego man ' click me ' on the home page, and why he doesn't something when I click on?

  Click Me logo is part of the promotion of the Humble Mozilla Bundle - clicked once you should be able to control the character with the "WASD" and "IJKL" key.

  Citing the-edmeister https://support.mozilla.org/en-US/questions/1025706

  Who click Me the game is part of the promotion of the Humble Bundle of Mozilla on the default Home Page [topic: Home], which loads from the Mozilla servers in the "Brand Logo" section (DIV) of about: House. A feature that has been used in Firefox 29 [IDE] just before the start of the Olympic Games.

  Also, part of this promotion is addressed in the "excerpt" under the container of the research on the topic: homepage.

  If you want to prevent the section "Brand Logo" (and the "snippet" under the reservoir of research) never to be seen again, you can install this UserStyle and elegant. https://userstyles.org/styles/104673/about-home-hide-snippets-and-hide-brand-logo

• I clicked on the source page and remove nodes with the web developer and removal became permanent. EBay does not load pictures. How to fix?

  The problem is on my desktop and my laptop. I got a little happy click on my desktop and click the Web Developer. I tried to remove an ad really annoying flash on the side of the screen. I think I entered in the source page and remove the node. I really don't know what happened, but stopped loading for ebay pictures and everything is a list written on the side of the page. I deleted the cache and cookies. I have reset mozilla. I uninstalled and reinstalled mozilla. Laptop is not immediately affected, but now having the same problem.

  It is a very strange problem.
  
  Any changes made with the web developer tool will save and should be cleared when the page is reloaded.

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? The report please come back shortly.

• Update of Firefox, and now all of the web pages and icons are inflated. How do I put back it as it was?

  Update of Firefox, and now all of the web pages and icons are inflated. How do I put back it as it was?

  Hello

  Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution.
  You can adjust the resolution of your screen.
  To change it follow these steps:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

  This solve your problems? Please report to us!

  Thank you.

• Printer Photosmart 5520 problem:, I have access to the secure page and cannot open a session

  My printer does not print in black. I followed all the instructions to fix it. I can't go down loard that assistance because it is a Vista. I get to the secure page and he asked my name and my password. I am the administrator, but it does not accept my names or passwords and blocking me. What name and password it seeks?

  Hi @arts4pat,

  Welcome to the Forums of HP Support!

  I see that you get a secure page and that you are unable to print black on your HP Photosmart 5520 e-all-in-one printer. I'd be happy to help you with this.

  I like that you get the login screen for the Built-in Web server for the printer. Is this correct? This seems to indicate that someone has put a username and password on the printer, for security reasons. If you don't know what are the connection information, the only way to remove this is to do a factory reset on the device. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  That being said, I would like to start here. Please, try the steps in this guide, the printer prints blank Page or fact not printing black or color ink for HP Photosmart 5520 and Deskjet Ink Advantage 5520 series e-all-in-one printer.

  NOTE: This problem may be caused by problems with the ink cartridge print head or with the printer ink system.

  If you have completed all the above steps and your product still has a problem, the printer service.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to choose your
  contact options»
  Step 4. Scroll down and click on: contact HP options - click Get phone
  number
  File number and phone number are displayed.

  I hope this helps. Good luck!

• When I turn on my computer it tells me that I need to activate windows. I click on 'YES' it takes me to the activation page and says that Windows is already activated.

  Windows XP Activation loop.

  When I turn on my computer it tells me that I need to activate windows. I click on 'YES' it takes me to the activation page and says that Windows is already activated. All I can do is, click 'OK' and he takes me into a log on screen with my name on it and goes through the same process, as described at the beginning of this statement. I'm in a loop. The only way out is to wipe my hard drive and reload windows new who, within 30 days, it will do no doubt once again. How to do this?
  For 3 years I rebooted my computer. That's why I reloaded it in the first place. I sent this version of Windows XP by Microsoft and have recharged the system at least 4 times in the past 10 or 11 years.

  Ken

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  You are prompted to activate Windows XP or Windows Server 2003 every time that you start the computer:

  http://support.Microsoft.com/kb/312295

  Hope this information is useful.

• Win 10 update placed on the updates page, and does not update us '.

  We have a HP while a win 7 64-bit home premium.  We do not want to win 10 and hid all the updates that relate to what we know.  Now, to win 10 placed itself on the update page and wants to be installed.  It will not install to us of new updates of win 7.  What can we do?  Don't really like how microsoft has tried to impose it on everyone.  Please give us an answer.  Thanks Mammy37

  I had the same problem and used http://blog.ultimateoutsider.com/2015/08/using-gwx-stopper-to-permanently-remove.html

  I tried to hide the upgrade, but it came back in return. Finally forced to use the above with 'success' on the computers that I don't want to upgrade to Windows 10.

• Generate class files using the WSDL url and wsimport

  I am trying to create a java application that hits the service exposed by hub.

  To create the application in java, I'm generating class files using the WSDL that is created and exposed by the hub.

  Executed steps:

  1 created an application in OPA.

  2. deployed on the hub (usinf deploy option of snapshot on Policy Modeling)

  3. in the deployment tab, I see the request and get the url of the wsdl by clicking on it.

  I try on this wsdl wsimport command. But it gives me following error messages.

  ---------------------------------------------------------------------------------------------------

  C:\***\AllFiles > wsimport http://localhost:7001/hub/determinations-Server/assess/SOAP/generic/12.2/AttemptOne?WSDL

  the analysis of WSDL...

  [ERROR] invalid WSDL http://localhost:7001/hub/determinations-Server/assess/SOAP/generic/12.2/AttemptOne?WSDL , expected {http://schemas.xmlsoap.org/wsdl/} html (line 2) data definitions

  Cannot read the WSDL document: ( http://localhost:7001/Hub/determinations-Server/assess/SOAP/Generic/12.2/AttemptOne?WSDL , because 1) did not find the document. (/ 2) the document could not be read. (3) the element the document root is not < wsdl:definitions >.

  [ERROR] WSDL:service is not found in the WSDL (s) provided:

  At least a WSDL with definition of at least one service must be provided.

  Unable to parse the WSDL file.

  ---------------------------------------------------------------------------------------------------

  If I store the wsdl file in a file on my local computer, and then run wsimport, it generates the classes very well.

  Can someone provide me with a way that I can generate the classes using the wsdl url and not the local file?

  Also, do I need to create a connection in the Connections tab on the hub?

  Thanks in advance.

  -Alain

  Looks like you could run in the user authentication when wsimport runs against the WSDL. Instead of the WSDL, its reception, the login page.

  The best way to work around this problem is perhaps what you do already - to obtain the wsdl and save them in a file.

  Another solution is to disable the restriction of connection to the Web Service API. You can do this in the menu on the users page (admin role can turn on and off.

  You can switch between a user and a password with the call of the WSDL file, but I don't know if its possible to do with wsimport

  See you soon

  Frank

• Can I use the Eloqua page markup in an external page?

  Can I use the Eloqua page markup in an external page?

  Hi Sanjiv yadav,

  Yes, we do. To do this, we need to Eloqua script to follow up on the page in question. After the script, you need to update a Sitemap. And here you can see if it is traceable or not?

  Thank you

  Eloqua Expert

• I can't download the trial for inDesign (for Mac), Safari cannot open what I think is the redirection page and says he does not know how to open the app

  Safari can't open what I think is the redirection page and says he does not know how to open the app.

  
  It gives me the following information:

  OS X does not know how to open the addresses starting with aam

  Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

• Need a way to clear a form on the current page and not the entire form...

  IM new to Adobe Acrobat and worked on the conversion of some of our OmnForm 5.0 form PDF file, I've created a form that contains a button to clear the form.  It works very well!  Now, I created a template in the PDF of the current page and then created a button to spawn a new page of the model.  Creating the page works as well.  The only problem I have is that the clear form button clears the entire form.  I need the key to erase only the current page.

  I'm a relative newbie when it comes to script.  I can understand generally simple scripts when I see them, but to create new groupings still isn't my forte. HE's researching the resetForm method, but it seems that there is no option to move the current page to him? (As I said I am relatively new to java scripts).  If anyone has the directions on how to do it I would be very happy.

  You can use the code that I posted here: http://forums.adobe.com/message/4234483

• How to create the new page in the master page and make reference to the reference text framework previous page id?

  I have problem to apply/create an element of the master page and how to run the previos page text block to create the page text

  InterfacePtr<IPageSetupPrefs> iPageSetupPrefs (,static_cast<IPageSetupPrefs * > (:QueryPreferences() IID_IPAGEPREFERENCES, docRef)));

  if (iPageSetupPrefs is nil) {

  Assert (iPageSetupPrefs);

    break

  }

  InterfacePtr<ICommand> iNewPageCmd (CmdUtils:kNewPageCmdBossCreateCommand());

  if (iNewPageCmd is nil) {

  Assert (iNewPageCmd);

    break

  }

  InterfacePtr<IApplyMasterCmdData> iApplyMasterCmdData (iNewPageCmd, IID_IAPPLYMASTERCMDDATA );

  if (iApplyMasterCmdData is nil) {

  Assert (iPageCmdData);

    break

  }

  InterfacePtr<IPageCmdData> iPageCmdData (iNewPageCmd,UseDefaultIID());

  if (iPageCmdData is nil) {

  Assert (iPageCmdData);

    break

  }

  Int32 numPagesToInsert = 1;

  PMRect pageSizeRect = iPageSetupPrefs->GetPageSizePref();

  Int32 pos = iPageCmdData->GetNewPageInsertPosition();

  ISpreadGeometry InterfacePtr<IGeometry> (spreadList->QueryNthSpread(0));

  if (iSpreadGeometry is nil) {

  Assert (iSpreadGeometry);

    break

  }

  spreadUIDRef =:GetUIDRef(iSpreadGeometry);

  PMRect dfltPMRectPageSize = iPageSetupPrefs->GetPageSizePref();

  PMReal pageWidth is dfltPMRectPageSize. Right () - dfltPMRectPageSize. Left ();

  PMReal pageHeight is dfltPMRectPageSize. Bottom () - dfltPMRectPageSize. Back to top ();

  PMRect usrDefPMRectPageSize (0, 0, pageWidth, pageHeight);

  K2Vector< PMRect> pageBoundingBoxes;

  for ( int32 i = 0; i < numPagesToInsert; ++ i) {

  pageBoundingBoxes. push_back (usrDefPMRectPageSize);

  }

  iPageCmdData->SetNewPageCmdData(spreadUIDRef, numPagesToInsert, pos +1, & pageBoundingBoxes, nil);

  / / CreateSpreadFromSpread (docRef, spreadUIDRef);

  InterfacePtr<IBoolData> iBoolData (iNewPageCmd,UseDefaultIID());

  if (iBoolData is nil) {

  Assert (iBoolData);

    break

  }

  bool16 allowShuffle;

  if (this->GetShufflePref(allowShuffle, docRef) iskFailure) {

    break

  }

  iBoolData->Set(allowShuffle);

  CmdUtils:ProcessCommand(iNewPageCmd);

  Above code, able to create a page but the problem in applied master page?

  Using document Pages face?

  I think that your posToInsertAt for IPageCmdData::Set is incorrect.

  If the doc does not have facing Pages, posToInsertAt = 1;

  If doc is facing Pages and page insertion is the left-hand Page, posToInsertAt = 2;

  If doc is facing Pages and insert page is the right Page, posToInsertAt = 1;

  posToInsertAt = spread-> GetNumPages();

  newDocCmd and newDocCmdData are not used, you can delete these.