Use the same command

Similar Questions

• How to use a keyboard shortcut for text bold/underline instead of bookmarking/addition of grid using the same control keys?

  Hi people,

  I'm using Ctrl + B to "BOLD" text in my document; but he chooses randomly between the text in bold vs bookmarking page... it gets really annoying. How can I disable bookmarking page by using Ctrl + B? I'm trying just to bold text... I don't care about bookmarking

  I also try to highlight the text using Ctrl + U; He noted sometimes and other times, shows a grid on the page. How prevents having these contradictory effects by using the same command?

  S

  I use Windows 8.1, acrobat pro DC

  This happens when you use comment tools and simultaneously editing tools in the same session.

  Workaround: Do not use the comment tools when editing. Wrap with Assembly before moving to comment.

• Using Firefox 7.0.1; having problems with hotmail. Cannot click on controls at the top of MSG, which is New, reply, delete, etc.. Can click on the same commands @ the bottom of the problem w/no MSG. Also cannot click on Inbox folder once I have access to

  Using Firefox 7.0.1; having problems with hotmail. Cannot click on controls at the top of MSG, which is New, reply, delete, etc.. Can click on the same commands @ the bottom of the problem w/no MSG. Also cannot click on Inbox folder once I have access to another folder. All known solutions?

  This problem may be caused by the Yahoo! toolbar as scopes as well down and covers the top of the browser window, allowing links in this part of the screen not clickable.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• recently to message this application memory is exhausted when I use the same applications as always before

  iMac running OS 10.9.5, suddenly getting alerts that my application memory is running out / has run out; I use the same applications that I used throughout and never had these alerts. I close all except an application but still get the message. This just started happening.

  HI there are Selia,

  Looks like you get this error message concerning the exhaustion of the memory of the application no matter how little you actually run. I would like to start by resetting your PRAM first:

  OS X El Capitan: reset PRAM your computer

  https://support.Apple.com/kb/PH21876?locale=en_US

  1. Choose the Apple menu > shut down.

  2. Look for the following keys on the keyboard: Option, command, P and r. you need to hold these keys down simultaneously in step 4.

  3. Turn on your Mac.

  4. Immediately press on and hold down the command-Option-r-P. You must press these keys until the black screen with the Apple logo to appear.

     Continue to hold the keys down until you restart your Mac, and you hear the tone of starting for the second time.

  5. Release the keys.

  After resetting the PRAM on your computer, you may need to update your speaker volume, screen resolution and startup disk preferences.

  Then test the question a bit. If it persists, I would then start mode safe so that the system can check for disk errors and clear a few caches of system level.

  OS X El Capitan: start in safe mode

  https://support.Apple.com/kb/PH21875?locale=en_US

  You can also use the activity monitor to see if there is a runaway process eating all your memory or put too much pressure on her:

  Use the monitor activity on your Mac.

  https://support.Apple.com/en-us/HT201464

  Thank you for using communities of Apple Support.

• Using the same interface CAN read and write

  Hello.

  Can I use the same CAN interface to read and write?

  For example:

  I send you CAN frame using CAN1 to my MCU.

  IF MCU confirmed the order of receiver it immediately sends the echo return command and there different ID to send the command.

  I tried to use CAN1 output framework and then reconfigures CAN1 to frame in queue and retrieve the frame of the echo.

  But it seems that I was always missing. The 'framework of CAN' kept vi expire.

  When I used the separator on the outlet BOX in my configured MCU CAN1 for frame and CAN2 for chassis in and I managed to catch the echo framework.

  I think about 100 ms for the frame in response that will be sent after the order has been received. It takes longer for the NI PXI-8513 reconfigure? Can I still do it, or I have to use the separator?

  I wad jump to use an interface to read and write.

  Thank you

  Ok. I misread your notion of echo. I understand now. I'm sorry.  The code you posted seems reasonable.

  (1) did you notice on or off for the session?

  (2) what baud rate? You can add a parameter of baud rates for the property to be explicit node.

  (3) I don't remember the name of VI, but you can add a status of Comm Get after reading. This will give you some information about the bus - if errors were detected, etc. Which can be useful to help debug.

• Use the same code module to multiple steps in the sequence

  Hi all

  I tried to implement a sequence that uses the same code for all steps module in the order, but I'm not returning to it when I need to send it commands.  I got regarding the appellant the VI in a new thread so that it can be executed asynchronously.  I can run the simple sequence and it will indeed open the VI and move to the next step.  When I close the VI manually from the front, the TestStand sequence is completed, as planned.  So it turns out that I have a lot more work.

  My question is how to call the thread separate from the main sequence and other sequences overtime when I need to change the settings.  If I insert a step in the Action, I have to select a file of VI, but from what I can tell, it opens another instance of the file and does not provide an interface with the other asycronously running instance.  My next guess was to use a stage of education, but I was not able to understand how to configure the search string to call the VI settings.  In addition, I don't know how to proceed.  Please notify.

  My intention is to start the module code (asynchronously) VI, run several different subsequences in the main sequence, which call this same VI and edit its settings, close everything and report the results.  If I'm understand how TestStand is supposed to work, please let me know.

  Thank you

  GSinMN

  What I do is use a queue to send data to the asynchronous VI.  So he can run and whatever, but also receive orders from the queue.  I use a motor of Action that contains the reference to queue and sends the commands.  If you really just call the engine of the Action of your sequences.

• Using the same control appeal return of different tabs

  Hello

  I am fairly new to this bare with me for a second...

  I have a situation were I use several tabs with the same exact command buttons in each of them.  Given that the buttons have the same function I want to use the same reminder.  I understand that each TAB is considered as an expert group and has its own Panel of handle.

  My problem is I want the call to make the difference between the button OK of TAB1 and TAB2.  The handle Panel sent back, the call is (from what I can tell) the Panel handle for the tab which is great, but it doesn't have a constant right having at it in the header file.  How sure that TAB1 always has the Panel handle 2 and TAB2 has always handle Panel 3, etc...

  Example: When I click on OK in TAB1 handle Panel sent to the btnOK is = 2 recall.  If I click OK in TAB2 is the handful of Panel = 3.  I want to move to the OK button, but do not want to use hard coded in full.

  int CVICALLBACK btnOK (int command face, int, int event, void * callbackData, int eventData1, int eventData2)

  {

  switch (event)

  {

  case EVENT_COMMIT:

  switch () {}

  case 2:<----I don't="" want="" a="" number="" here="" but="" a="">

  "do this."

  case 3:

  "do this."

  };

  }

  return 0;

  }

  The easy solution would be to have a reminder for each of the buttons.  If it's the only way to go if it's what I'll do, but I am interested in what you think.

  Thank you!

  Hello

  I see at least three ways to get what you want.

  Solution A: depend on constant tab page name (as you can get it back by giving the handle from Panel)

  In the callback, insert this code:

  name char [64];

  GetPanelAttribute (name of Panel, ATTR_CONSTANT_NAME),
  If (! strcmp (name, PAGE1)) {}

  Code for the first page of the tab

  }

  Else if (! strcmp (name, PAGE2)) {}

  Code for the second tab page

  }

  ... code additional pages

  Solution B: based on the attributes of the tab

  int parent, index;

  GetPanelAttribute (Panel, ATT_PANEL_PARENT, & parent);

  GetActiveTabPage (parent, PANEL_TAB, &index);)

  switch (index) {}

  case 0:

  Code for the first page of the tab

  break;

  case 1:

  Code for the second tab page

  break;

  ... Add the code to additional pages

  }

  Solution c: use the callbackData for buttons

  This solution requires code in two different program sections

  * During the loading of the Panel with the tab control

  int pnlH;

  GetPanelHandleFromTabPage (Panel, PANEL_TAB, 0, &pnlH);)

  SetCtrlAttribute (pnlH, PAGE1_BUTTON, ATTR_CALLBACK_DATA, (void *) 1);

  GetPanelHandleFromTabPage (Panel, PANEL_TAB, 1, &pnlH);)

  SetCtrlAttribute (pnlH, PAGE2_BUTTON, ATTR_CALLBACK_DATA, (void *) 2);

  ... and so on

  * In the recall button

  switch (callbackData (int)) {}

  case 1:

  Code for the first page of the tab

  break;

  case 2:

  Code for the second tab page

  break;

  ... Add the code to additional pages

  }

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• Create a new folder or change the name of a folder on the desktop does not display until I use the refresh command

  After changing the name of a folder or a file on the desktop or by creating a new folder (and then hit enter), the folder or the text file doesn't change - until I use the Refresh command. Then, the text shows correctly and the movements of folder or a file in a place open to the top left of the screen. Before using "Refresh" the folder or the file will not open. When I save a file on the desktop is not visible until the 'Refresh' is used. Sometimes, but not always the same behavior occurs in other folders as well.  I use Win XP SP3. Can someone please shed some light on this?

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·

  Method 1:

  I suggest you check in safe mode. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. click on safe mode from the list and press ENTER.

  Check if the problem persists.

  Method 2:

  I suggest you to scan your system for viruses and malware using a care Microsoft and Microsoft security essentials. Check the links below.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/security_essentials/

  Method 3:

  Create a new user account and check if the problem persists.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How can I prevent the access denied message when you use the shutdown command?

  I use shutdown /m \\computername/s

  I have "Access denied (5)" as an answer.
  I am admin on all my computers. Same username and password on each of them.
  How can I get this shutdown command to work remotely, so I can't access every computer command prompt via Remote Desktop?
  How can I prevent the access denied message when you use the shutdown command?

  Hello

  I suggest you to report this issue in TechNet Forums for Windows 7 networks: http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/threads

  Thank you.

• Can I use the same SSI twice on the same page?

  Hey all,.

  I'm having a problem whereby several SSI are not displayed on my page.

  I wonder if it's because the instances that do not display not is those called in the second round.

  Before I start posting code, etc, I was wondering if it was actually not possible to call the SSi even several times on a page.

  I can't find documentation showing it anywhere.

  Thanks in advance,

  Katrina

  1 edit: I tested it using a new unique SSI (i.e. one that has not been called nowhere elsewhere on the page and it is not show either... so I started a new thread where I post my code here: http://forums.adobe.com/message/5345250#5345250 )

  Edit 2: I guess I didn't parse correctly initially. It seems that it is NOT possible to use the same SSI twice on a page... Bummer!

  This problem has been solved in a different thread where members will provide information...

  Depending on the PHP command that serves as the include directive is certainly possible.

  includes only the files once

  will include more than once the file

  will include more than once the file

  Each has its own rules and quirks.

  http://PHP.net/manual/en/function.require-once.php

  http://www.php.net/manual/en/function.include.php

  http://www.w3schools.com/php/php_includes.asp

• Loading multiple files using the same interface in ODI

  Hi all
  
  We load multiple files using the same interface and get the error "java.sql.SQLException: ORA-00942: table or view does not exist" while inserting record in the staging table. It looks like the same temporary table is used when loading multiple files and the error. Grateful if someone offers a solution to avoid this error.
  We use the following KMS:
  
  (1) LKM SQL file
  (2) IKM Oracle SQL COMMAND append.
  
  Receive a quick response.
  
  Thank you
  RP

  Hello

  See this http://odiexperts.com/interface-parallel-execution-a-new-solution

  Thank you
  Fati

• How to return multiple images using the batch command

  With the help of Fireworks 8.
  
  I have a document with more than 200 executives. In the "Command"-> "Batch commands" menu I have the possibility of rotation and or multiple or individual images blur.
  
  What I would really like to do is to return all 200 images horizontally, but there is no option to do this at the same time.
  
  Or is it?
  
  Tell me that I'm not stuck with the only option of failover each picture individually.
  
  I have knocked down an image and recorded my actions as a command, but this "Flip" command could not be applied to several frames.
  
  Help out me.
  
  Thanx.

  You will need to use the feature to peel the onion of the Panel frames, as
  Alex said.

  Go to the control panel frames. Assign to all managers of onion (the box on the)
  left side of each image - click on the Executive in the area of skin of onion,
  Then click on the lower frame. You will see a line connecting all the
  frames) then click and drag on your entire canvas area to select all
  executives. If you have saved the command, you will find at the bottom of
  the menu of commands.

  This does not work, I just did.

  --
  Jim Babbage-. : Community MX:. &. : Adobe Community Expert:.
  Extend the knowledge, every day
  http://www.communityMX.com/
  CommunityMX - free resources:
  http://www.communitymx.com/free.cfm
  ---
  . : Fireworks adobe community expert:.
  News://forums.Macromedia.com/Macromedia.Fireworks
  News://forums.Macromedia.com/Macromedia.Dreamweaver

  CashComm wrote:
  >

  Quote:
  EDIT > TRANSFORM > FLIP HORIZONTAL. Do it once, then go to history
  > Panel and save a command customized. You have access to the
  > batch operations.
  > However this will affect only the first image of the top layer unless
  > other images or layers are selected manually.
  >

  
  > Thanks for your response Jim. I did everything as you described. I chose fram 1,.
  > so I chose the layer in the fram in the layers panel. I spilled usig
  > CHANGE it, TRANSFORM menu. In the history panel, I saved this command as
  > "FLIP".
  > I have selected 2-10 images, hold down the SHIFT key. Then I went to the
  > Menu command and selected my "FLIP" command and received an error message telling me "
  > that it could not apply.
  > I tried to find out where my Flip order is registered thinking that I'm going in
  > Explorer and drag it to the folder of command Batch that I could use it. But I have
  > could not find my FLIP order, even if it works perfectly if I'm changing
  > fram one at a time and only then if I select the layer in this context first.
  >
  > Apparently recorded commands do not work on several images.
  >
  > So I'm in a situation where I have to use the flip command or CHANGE-->
  > TRANSFORM caraa command on each fram individually.
  >
  > It's frustrating.
  >
  

• Can I use the same disc hard ext I used for El Capitan Yosemite without losing my data?

  Can I use the same disc hard ext I used for El Capitan Yosemite without losing my data?

  Yes. You should not lose any data, but always have a backup. In this case, you have your internal drive as a backup.

• Hi all OneHow can you buy an IBook UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing.

  Hello world

  How can buy you an IBook of UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing

  There is no solution, if it is not available in your area, you can't buy it.