Use the UPD in different Versions on the same server

Similar Questions

• Restore the backup with a new name and a different location on the same server

  Hi all
  
  I did a complete backup of my current PROD. Is it possible to restore the database on the same server, but with a different instance name, db_name and on another location?

  PRM says:
  Hi all

  I did a complete backup of my current PROD. Is it possible to restore the database on the same server, but with a different instance name, db_name and on another location?

  If you use RMAN my awnser is not.

  You cannot change the name of the database before open resetlog.

  But you can make this work without problem using the same server.

  You will need to change some parameters.

  Create a PFILE from SPFILE (prod) change parameter 'db_unique_name' file new name (ex TEST).

  Change all the value of PROD TEST except db_name parameter must be PROD.

  CREATE a SPFILE from this PFILE (spfileTEST.ora)
  Create a new password file (orapwTEST)

  So you can start this new Instance_name (TEST).

  Restore the PROD to TEST instance database, you will need use set new name to the file data or database (depends on which version you use)

  Retrieve the instance PROD database (TEST)

  It is time to open resetlogs...
  !!!!!!!!!!!!!!!!!!!!!!!!!!!! ATTENTION HERE!

  You need change redo log location before open resetlogs, you must query v$ logfile member column and change it to another location.

  After change you can open resetlog.

  Now its time to change name of database.

  Stop and start Mount

  Use the NEST

  NEST target=sys/password@instance DBNAME = TEST

  When this process is complete, NEST will be closing database.

  So you will need to start with nmount change db_name to the TEST and reset the parameter 'db_unique_name' (alter system reset db_unique_name)

  Then stop and start upstairs question OPEN DATABASE RESETLOGS and is done.

  HTH,
  Levi Pereira

  Published by: Levi Pereira on August 27, 2012 13:09

• Can I use the same Weblogic Server for soa suite 11 g and OSB panels?

  Hi all
  
  Is it possible to use the same server weblogic for SOA suite 11 and OSB?

  Hi Arun,

  SOA 11 g is running on weblogic version 10.3.2 OSB is running on weblogic 10.3, so you can't have two SOA suite 11 g and the OSB on weblogic even (not EVEN in the two areas of same weblogic). You must have two facilities of weblogic. (at this time)

  After the next release of OSB (planned for H2), you can run both the same weblogic.

  Kind regards
  Anuj

• Multiple vCenter on the same server database

  Hi all

  I'm migrating vCenter vCenter 5.5 5.1.

  Is it possible to use the same server SQL2008R2 for vCenter 5.5 database?

  Installation vCenter 5.5 database to the same server vCenter 5.1 will be will damage the 5.1 database? Use different database?

  What is the best way to secure the vcenter 5.1 during the installation of vcenter 5.5 database other than the database backup 5.1?

  Also does need seprate SSO database?

  Thank you...

  I used SQL dissferent account and vCenter was insalled on the new database without problems.

• using the same search terms on ebay, getting different results on firefox exploer

  using the same words to search on ebay for internet explorer, I get results more when I use ebay on FireFox > is cutting some of the results when using Firefox

  It is always possible that eBay is to differentiate between browsers and gives different results, based on previous visits.
  You can try to delete cookies in two browsers to see if it has an impact.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

• I use the same URL in day after day tabs/windows, but am not ure if this version will restore all tabs on restart the computer every morning?

  I don't think I can give more info

  8 and 9 Firefox Firefox will allow me to continue with the same tabs from last session as in Firefox 3? :

  You're on Firefox 3.6.24 and if you ask if the new version 8.0.1 will do the same the answer would be Yes and it continues to be controlled by tools > Options > general > when Firefox starts: show my windows and tabs from last time.

  From Mozilla Firefox 4 (earlier this year), has presented app-tabs that you might want to listen to the video and read when standing up. Since you're using the same tabs they are probably in the same order, day after day after day, so just see the favicons on tabs and the model about whether something will not like order or missing.

  Since you use the tabs and windows as in earlier versions, the change will affect you probably even the least. But Mozilla has improved this which exists of sessions were closed, the windows and tabs via the menu ('Alt + H') history.

  What you probably will not tolerate changes to toolbars, based on studies of imperfect ergonomics (like Microsoft). You can fix it right and make the toolbars close to what you had before (instructions below).

  You can make Firefox 8.0.1 look to Firefox 3.6. *, see numbered 1-10 Articles of the topic following the interface user of difficulty Firefox toolbar, problems (make Firefox 4.0 through 9.0, resemble 3.6). If you make changes, you must be aware of what has changed and what it takes to use changed or missing features.

  • http://dmcritchie.MVPs.org/Firefox/Firefox-problems.htm#fx4interface

  It is much more beyond these first 10 steps in the list, if you want to make Firefox more functional.

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

• Why the temperature shows on my watch always different temperature on the watch of my husband when they use the same application?

  Why the temperature still showing on my watch shows a different temperature than on my husband watch when they both use the same weather app?

  Hi Jodie

  If you are each using the weather app (which is included in the framework of the iOS and watchOS), the following steps can help (followed by each of you):

  • On your iPhone, in the weather app:
    • If using anything other than the current location (which is included by default), make sure you have each added to a common location / city.
    • To add another location, select the icon «+»
  • On your iPhone, in the application of the watch, go to: My Watch (tab) > weather > default City > make sure you have each selected at the same location (for example: place of current residence or Mount Laurel).
  • On your iPhone, go to: settings > privacy > location Services:
    • Ensure that the location service is enabled;
    • Make sure Apple Watch is face value while it helps;
    • Check that the weather is set to always;
  • On your iPhone, go to: settings > general > background App update:
    • Check that the bottom App Refresh is enabled.
    • It can also help to activate the setting for the weather.
  • For optimal performance of your watch, keep the Bluetooth and Wi - Fi enabled at all times on your iPhone:
    • iPhone: settings > Bluetooth - on.
    • iPhone: settings > Wi - Fi - on.

• Using the same control appeal return of different tabs

  Hello

  I am fairly new to this bare with me for a second...

  I have a situation were I use several tabs with the same exact command buttons in each of them.  Given that the buttons have the same function I want to use the same reminder.  I understand that each TAB is considered as an expert group and has its own Panel of handle.

  My problem is I want the call to make the difference between the button OK of TAB1 and TAB2.  The handle Panel sent back, the call is (from what I can tell) the Panel handle for the tab which is great, but it doesn't have a constant right having at it in the header file.  How sure that TAB1 always has the Panel handle 2 and TAB2 has always handle Panel 3, etc...

  Example: When I click on OK in TAB1 handle Panel sent to the btnOK is = 2 recall.  If I click OK in TAB2 is the handful of Panel = 3.  I want to move to the OK button, but do not want to use hard coded in full.

  int CVICALLBACK btnOK (int command face, int, int event, void * callbackData, int eventData1, int eventData2)

  {

  switch (event)

  {

  case EVENT_COMMIT:

  switch () {}

  case 2:<----I don't="" want="" a="" number="" here="" but="" a="">

  "do this."

  case 3:

  "do this."

  };

  }

  return 0;

  }

  The easy solution would be to have a reminder for each of the buttons.  If it's the only way to go if it's what I'll do, but I am interested in what you think.

  Thank you!

  Hello

  I see at least three ways to get what you want.

  Solution A: depend on constant tab page name (as you can get it back by giving the handle from Panel)

  In the callback, insert this code:

  name char [64];

  GetPanelAttribute (name of Panel, ATTR_CONSTANT_NAME),
  If (! strcmp (name, PAGE1)) {}

  Code for the first page of the tab

  }

  Else if (! strcmp (name, PAGE2)) {}

  Code for the second tab page

  }

  ... code additional pages

  Solution B: based on the attributes of the tab

  int parent, index;

  GetPanelAttribute (Panel, ATT_PANEL_PARENT, & parent);

  GetActiveTabPage (parent, PANEL_TAB, &index);)

  switch (index) {}

  case 0:

  Code for the first page of the tab

  break;

  case 1:

  Code for the second tab page

  break;

  ... Add the code to additional pages

  }

  Solution c: use the callbackData for buttons

  This solution requires code in two different program sections

  * During the loading of the Panel with the tab control

  int pnlH;

  GetPanelHandleFromTabPage (Panel, PANEL_TAB, 0, &pnlH);)

  SetCtrlAttribute (pnlH, PAGE1_BUTTON, ATTR_CALLBACK_DATA, (void *) 1);

  GetPanelHandleFromTabPage (Panel, PANEL_TAB, 1, &pnlH);)

  SetCtrlAttribute (pnlH, PAGE2_BUTTON, ATTR_CALLBACK_DATA, (void *) 2);

  ... and so on

  * In the recall button

  switch (callbackData (int)) {}

  case 1:

  Code for the first page of the tab

  break;

  case 2:

  Code for the second tab page

  break;

  ... Add the code to additional pages

  }

• using the same indicator of string in different stacked sequences

  Hi guys, I want to use the same string in different sequences stacked indicator. I tried to plug the output of each string constant through the sequence on my indicator chain outside the block in the sequence, but then I get an error "wire connected to a tunnel not channeled. What is the best way to use the same indicator for all sequences?

  Hi JoVMo,

  You can just use a local Variable of this indicator within the sequence...

  

  Kind regards

  Nitz...

  (Kudos are always welcome)

• WebDAV: use of the different logins to different WebDAV folders on the same server

  Hello

  I quite often use WebDAV to access the various folders on a server on the Internet. I do this "Add a network location" in Windows Explorer, then using the address https Server (for example https://www.myserver.com/folder1). The first time that I need to enter the credentials of the user and the corresponding password and Windows seems to store them somewhere so that I can connect to this folder also after a re-login without having to re - insert my credentials.

  The question I have, is that I also need access to different folders on the same server (for example https://www.myserver.com/folder2) that requires different user credentials and passwords. The only way I have found is to remove the first network location, disconnect and reconnect to the Windows and then add the new location of the network in Windows Explorer; Just delete the first network location and adding the second network location would not be enough that Windows had always stored the context of the 1st network location and tried to connect with the credentials of the user and the password of the 1st second.

  Question: is there a less cumbersome way to remove context from a WebDAV connection, so that I do not need to disconnect and reconnect if I need to connect to the same server with different user credentials?

  Thank you very much

  Johannes

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Can I use the same version of PSCC on an IMAC and Macbook 10.6?

  Can I use the same version of PSCC on an IMAC and Macbook 10.6?

  Hi Rbobl,

  Photoshop CS6 is the last version that you can install on Max OS 10.6.8.

  You can view the system requirements for Photoshop CC 2015 and older versions.

  Configuration of Photoshop

  Kind regards

  Mohit

• Can you download DW CS4 and use the same serial number for a version previously purchased?  DVD won't work.

  I have a new laptop and wish to install my Dreamweaver CS4 on the new computer laptop and my real CD no longer seems to work.  The CD/DVD drive in laptop is fine and works with other media, so I don't know that it's the drive itself.  My version of DW CS4 has only previously installed on a machine. Is it possible to download online and use the same serial number?

  Is it possible to download online and use the same serial number?

  Download Adobe Creative Suite 4 products

• I just downloaded Creative Suite 6 on my new MacBook and not only the interface seems a bit different but I noticed that the oil paint filter is not available.  I used the same discs on my office iMac and the filter still works there.

  I just downloaded Creative Suite 6 on my new MacBook and not only the interface seems a bit different but I noticed that the oil paint filter is not available.  I used the same discs on my office iMac and the filter still works there.  I use it often and would appreciate any help to recover!

  Please download and install Photoshop CS6 from the following link: download Creative Suite 6 applications

• If I bought the Photo Shop elements 2014 for my can of Mac desktop I also install the Windows version using the same serial number on my laptop?

  Does anyone know if buy you a camera for Mac store so you can use the same subscription to download the version of windows to a computer windows laptop?

  I think that they have stopped selling items with a cross-platform license a version or two.

• How do you get Lightroom CC on my new iMac? I currently use it on this iMac 1 and want to use it on the new. I am using a different email but address using the same wi - fi connection. Thank you.

  I just bought a new iMac, and after setting up, I need to find a way to access the Photoshop and Lightroom CC CC. I am using the same airport and wifi but a different e-mail address, if that matters. ?

  Hi Captainlenny

  You must first download Creative cloud Application Download Adobe Creative Cloud apps | CC free trial Adobe

  Then sign in with your Adobe Id (The same Id with which you bought the map) see connect and disconnect to activate Cloud Creative applications

  • You cannot use a different Email address to connect
  • If Creative cloud says "you are already you connect to maximum authorized devices" select " sign me out of all the other thing ' so that you can connect.

  Concerning

  ~Assani