Use this device as the primary monitor check box is not available on my display settings.

Similar Questions

• Two monitors - I can't change "use this device as the primary monitor" because both are grayed.

  I just put my laptop (1) and (2) monitor to use together.  I like being a primary monitor (2) would monitor the "use this device as the primary monitor' however are grayed out.  I tried several things but cannot get to work.  Any suggestions? I am on Windows 7

  Hello, Olivia,.

  It depends on how you have the monitor Setup.

  You can get this option only when you select extend monitor instead of select two copies.

  If you want to set primary and secondary monitors, you must select the Extend monitors.

  For more information, see the article:

  Move windows between multiple monitors

  Setting up dual monitor: two screens are better than one

  Hope the helps of information.

• the Encrypt contents to secure data check box is not available, how to fix?

  When you encrypt a folder, if you open the properties of the folder, and then clickAdvanced, check the Encrypt contents to secure data box is not available (it appears grayed out).

  Hi Panvis,

  If you want to encrypt a file or folder by using EFS (ENCRYPTING File System), but the Advanced button is not displayed on the Properties dialog box or the encrypt the contents of the box secure data is grayed out, it could be for one of the following reasons

  You don't have an edition of Windows that supports the EFS. You can use EFS to encrypt files on Windows vista edition full, professional and Enterprise editions.

  The drive that you want to encrypt files on is not formatted using the NTFS file system. EFS only works on computers that use the NTFS file system. If the file you want to encrypt is on a drive that uses the FAT or FAT32 file system, you must convert the drive to NTFS to display the Advanced button.

  For more information, see:convert a hard disk or partition to NTFS.

  This option is not available in Windows Vista Starter, family basic and Windows editions Home Premium, for more information see the link below: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-encrypted-files-and-folders

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• Error "You need a WIA driver to use this device" when you try to open the Canon DR5010C

  Original title: get a Windows Image Acquisition driver to work with a Canon DR5010C attached by usb port

  I have already downloaded drivers TWAIN & SISI and still get the error message "You need a WIA driver to use this device" when I try to open the Canon DR5010C of the printers & damage.  I am looking for a driver interface solution.

  Hello JRWORK,

  You will need to contact Canon because they provide the drivers for your Canon DR5010C device.
  http://www.USA.Canon.com/Cusa/Office/products/hardware/scanners/high_speed_document_scanners/imageformula_dr_5010c_color_production_scanner#DriversAndSoftware

  I hope this helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I keep getting "the trust relationship between this workstation and the primary domain failed" error windows 2008R2

  Hi all

  I appreciate your help. And I hope that this issue has been addressed previously, although I couldn't find any solution there.

  I manage a domain windows 2008 with 3 domain controllers. Recently my workstations continue to fall out of the field. I get "the trust relationship between this workstation and the primary domain failed" to many workstations.

  I know how to fix properly, use netdom.exe. But the mistakes keep coming back. I don't know where to look for the source of this error. A possible problem might be the time in any field is out of sync. But all my workstations synchronize with the domain controller with the primary domain controller role and seems to work correctly.

  Are there other sources, that I need to check? This is getting frustrating.

  Thank you much for the help.

  Sincerely,

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Download "Bluetooth device driver not installed." with my mobile phone in Lenovo laptop. I could also see a yellow mark on this device in the Device Manager and a code 28 error

  I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows

  When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.

  I have laptop Lenovo, which has something like that for bluetooth

  Broadcom Bluetooth 4.0 USB

  Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi

  In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).

  But windows cannot fix it.  I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well.  I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.

  Please help me. Please give me link if there is no download needed

  Original title: bluetooth

  Hi Roger,

  You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.

  Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.

  Please come back if you face problems related to Windows and we will be happy to help you.

• Problem of password of account, without that we can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid.

  Hi, I hope you can help with this problem. A friend has 6 computers networked to a Tower Server and have a problem. A worker student put computers into hibernation, and since then, nobody can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid. I tried to get into the pc to try removing network and replace it, but I can't get on the Administrators account because it has been disabled. I'm at a loss on how to proceed. My friend cannot afford a service call, so I'll try to help him.  Thank you

  If the computer is on a domain then there are at least two accounts that can be used to remove the computer from the domain:

  • A domain administrator account.
  • A local administrator account.

  When your friend has launched Windows for the first time after buying the machine, he was prompted to enter the name of an account. This account is created automatically with administrator privileges. He should use it now.

• The trust relationship between this workstation and the primary domain failed.

  The trust relationship between this workstation and the primary domain failed.  This only happens on the Windows 7 desktop.  It is sporadic.   Add the computer account to the domain is not a viable solution.  It happens far too often.

  There is nothing coherent we found on systems that are removed from the field.  Some time its workstations users, sometimes its laptops to students and sometimes he posts of laboratory work.  Different types of systems use different images.  All images are syspreped before creating the image.

  Hi Geoffrey,.

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question on the Technet Windows 7 Security Forum

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Selected "do not use this device" to TV HDMI for sound. Cannot find him.

  Windows 8.

  Went to the sound engineer. Clicked on the tv that I am connected to HDMI and opens the options for this. Selected "do not use this device.

  How can I get that back? I should have just changed between speakers and tv instead of that.

  Video works, but I just can't select the upcoming sound of TV more

  NVM. fixed. lock'er upward.

  right click a blank space under playback devices

• using a sequence as the primary key

  I use a sequence for the primary key of the database for dimensions (following Kimball methodology). In ODI, I define another unique key as principal. It will not let you select check null = true and therefore a sequence can serve as primary. Someone at - it something differently.

  ss396s wrote:
  I use a sequence for the primary key of the database for dimensions (following Kimball methodology). In ODI, I define another unique key as principal. It will not let you select check null = true and therefore a sequence can serve as primary. Someone at - it something differently.

  You must follow the rules on the sequence
  1 > it cannot be run on the source
  2 > may not be a part of your key update
  3 > check not the null check box should not be selected
  4 > separate box must not be activated

  If you use a sequence for the primary key for the database, and then identify another or several columns are coming from the source and use that you can only identify a row. Use these columns as your key to update.

  Thank you
  Fati

• My wife has created a book of the best photos of the year project. How can I copy these photos in a standard album so I can use this set in the future?

  My wife has created a book of the best photos of the year project. How can I copy these photos in a standard album and the book so I can use this set in the future? All the commands I want to use are grayed.

  Using Photos of Apple.

• When you connect to Windows 7, get the error "the trust relationship between this workstation and the primary domain failed."

  You open a session in Windows 7, you get an error stating "the trust relationship between this workstation and the primary domain failed."
  Can someone help me please...

  AC of Phil wrote:
  > As you connect to Windows 7 you get an error saying "the trust relationship.
  ' > between this workstation and the primary domain failed.
  > Can someone help me please...

  Contact your domain administrator for the domain of the computer account
  recreated or reactivated, as appropriate.

  --

  Bruce Chambers

  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://support.Microsoft.com/default.aspx/KB/555375

  They who can give up liberty for a little temporary
  safety deserve neither liberty nor safety. ~ Benjamin Franklin

  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell

  The philosopher never killed the priests, while the priest was
  has killed a large number of philosophers.
  ~ Denis Diderot

• I try to use After Effects on my laptop, but all his telling me, is that "you can't use this version of the application"Adobe CS6 effects"with this version of Mac OS x.

  I try to use After Effects on my laptop, but all his telling me, is that "you can't use this version of the application"Adobe CS6 effects"with this version of Mac OS x.

  Install the latest update of CS6:

  http://Adobe.LY/DVA_updates

• I own CS 5Premium. Read the FAQ, it seems, I am eligible to proceed to 6 CS but I can't find the upgrade to purchase and download. I can't upgrade to CC because $49 per month, it's too much for me - do not use this product for the job. The offer of $29 se

  I own CS 5 Design Premium. Read the FAQ, it seems, I am eligible to proceed to 6 CS but I can't find the upgrade to purchase and download. I can't upgrade to CC because $49 per month, it's too much for me - do not use this product for the job. The offer of $29 seems reasonable but $49 is too much. I don't need most of the programs included in the CC, but subscribing to only three of them will cost much more. Really don't know what to do here :-(

  Buy CS6:
  ----------------------

  http://www.Adobe.com/products/catalog/CS6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

  I believe that the offer of $29 is only for the first year, so you would end up paying $ 49 thereafter.