Use VBA and Excel to open Dreamweaver HTML (CS5), search and replace text, save and close

Similar Questions

• Unable to connect to oracle DB using VBA and you are prompted with the error:-the client components and Oracle network have not been found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or installation of the

  Hello

  It would be helpful to me if someone can give me instructions on setting the version of driver or oracle client required to connect to the the Oracle DB using excel VBA

  My config: -.

  Windows - 8-64 bit

  Excel 2013-32 bit

  The components of the client / I should install, and how to solve the question below...

  I tried the VBA code... but you are prompted with the error message above

  Void Oracle()

  Con Dim As ADODB. Connection

  Dim rs As ADODB. Recordset

  Dim query As String

  The con value = New ADODB. Connection

  Set rs = New ADODB. Recordset

  strCon = "Driver = {Microsoft ODBC for Oracle}"; "." & _

  "CONNECTSTRING = (DESCRIPTION ="& _.

  "(ADDRESS =(PROTOCOL=TCP)"& _

  "(HOST = HostNumber)(PORT=PortNumber))" & _

  "(CONNECT_DATA = (SID = SIDNumber))); UID = username; pwd = password; »

  con. Open (strcon)

  If err. <>Number 0 then

  MsgBox ("Oracle error:" & vbCrLf & err.) Description)

  On the other

  MsgBox ("Oracle DB Connection successful.")

  End If

  End Sub

  I'll replace it with the values of host origin...

  Thanks for the suggestion you till u gave...

  complete solution is in the link below...

  https://itkbs.WordPress.com/2014/07/28/how-to-install-ODBC-driver-for-Oracle-in-Windows-7/

• Disconnect all active connections of Essbase using VBA in Excel code

  Hi all
  
  I am currently using the code to disconnect the connection active essbase below. It works fine but it shows me a window with the list of connections active essbase and I have to select each essbase connection, and click Disconnect. I want a vba code that will disconnect / kill all the active connections of Essbase to only once. for example I have 10 worksheets relating to different databases within Essbase. I want a code that will cut all 10 sheets at once. Please expedite. Thank you for your help in advance.
  
  Private Sub MDisConn()
  On Error Resume Next
  EssError = EssMenuVDisconnect()
  ErrorBox
  End Sub

  Hello

  You could use EssVDisconnect that takes a sheet name and does not open the login logout box.

  DECLARE Function EssVDisconnect Lib "ESSEXCLN. XLL"(ByVal Nom_feuille As Variant) As Long

  Void DisConn()
  X = EssVDisconnect ("Sheet1")
  End Sub

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I have Photoshop elements 14. After that I have open and use it and close the program, I can NLE computer

  After that I open and use the editor of Photoshop elements 14 I have to rebot my computer to open the editor of Photoshop again.  I have a new computer with windows 10.  Help

  gerryc79215295 wrote:

  After that I open and use the editor of Photoshop elements 14 I have to rebot my computer to open the editor of Photoshop again. I have a new computer with windows 10. Help

  When you restart the computer, you mean "Restart" of the machine or do you want to say "shut down" and turn it back on to start.

  I ask this because in Windows reboot means restarting and you get this from the power button by selecting restart.  Also, in 10 Windows updates are required and they are installed without knowledge of the user but restarting does not automatically apply all the correctl patches; y. so if you restart the computer, we can eliminate this problem completely and move on to another test.

  The test another that I have is to reset the PSE14 preferences file, do you up the home screen then pressing 'CTRL + ALT + SHIFT' and clicking on the Button Editor.  This invites you to delete the preferences file before starting the editor.

  

  

• I'm trying to control adobe via VBA in Excel

  I'm trying to control adobe via VBA in Excel, well I can control some things, like opening the window 'about' and so on. However, what I want to do is click on the button "Prepare form" by using VBA, and I tried a lot of different ways to do this. HOW to trigger the button to "prepare the form?

  Grateful for answers!

  You can automate Adobe Acrobat in various ways, but none of them involve button clicks, and several button clicks are not things that can be automated. Programmers wishing to work with Acrobat need the Acrobat SDK kit.

  I notice that you just say "Adobe". Maybe you mean the free Adobe Reader/Acrobat Reader software. If so you're out of luck, some interfaces in the SDK Acrobat Reader will not be cut.

• I used my two licenses and I can not turn off dreamweaver from my old pc. When I try to open dreamweaver from my old computer, it is said the license is no more valuable. What can I do?

  I used my two licenses and I can not turn off dreamweaver from my old pc. When I try to open dreamweaver from my old computer, it is said the license is no more valuable. What can I do? Is there a place I can call for assistance?

  Contact customer service and ask them to help you.

  Scroll down to still need help?  Click on Contact us.

  Learn how to enable or disable Adobe applications

  Nancy O.

• How can I open a html with Dreamweaver, the file in google reader?

  If I right click on the html code, I get no option properties, or anything to open it in something other than Google docs.

  [When I do that, it's like Google Chrome unless a 18 page document becomes 80 pages.]

  Is it so that you can not use Google Reader for collaborative work using Dreamweaver? You must work on your desktop and then sync to the cloud?

  First download the files of Google Drive and save to a folder on your local hard drive.

  Google Drive (Exemple: C:\YourSiteName\[file(s)]

  Open Dreamweaver.  Go to Site > new Site > define a local site folder.  See screenshot.

  

  In the Panel files (F8), you should see all of your files/folders site.

  Click + to expand the folders.

  Double-click the file to open it in the DW workspace.

  

  Nancy O.

• Smart view Ribbon not displayed when Excel is called using VBA

  Hyperion dear gurus,.

  I am in need to call refresh smartview by calling excel with VBA from excel module in another sheet (master). But when I invloke Excel using VBA, smartview Ribbon not be enabled, because of which the HypConnect, HypVMenuRefresh command does not work. If I open excel directly and run the module, it connects very well and did the update with no problems. I tried to activate and deactivate the smartview using VBA, but it does not work either. If I call excel directly using a batch by using the call command, then it works fine, but the batch file does not close as if I use the ThisWorkbook.Close command, then it does not completely close Excel, the instance is running, and if I try to close it using Application.Quit, then it closes Excel completely. Any help would be much appreciated.

  Thank you and best regards,

  SiddN.

  Hello

  I was able to achieve this goal by using batch files by calling a excel models.

  Thank you

  SiddN.

• SV 9.3.3 office 2010 cannot open 17.2 MB file created using office 2003 excel

  I'm testing smartview 9.3.3 with Office 2010 and unable to open a large excel file created using Office 2003. The file has 39 tabs and all tabs contain formulas for HsGet. Is there some setting I need to change the first to allow this file to open it in excellent 2010? What is a macro setting?
  
  Thank you

  This is probably due to a problem with uncompressed metadata stored in the workbook. In most cases, the issue is found in the first journal in hidden forms. There are a few options to fix this. This file should also be open, but it may take a very long time, in some cases, the file opens fine with SV disabled in other cases, it won't matter.

  Option 1

  Open the file (it may take a while)
  Save the file under a XLSX file.
  Try to open it again.

  Option 2

  Open the file (it may take a while)
  Right click on the tab for the first worksheet calculation and "select all sheets.
  Right click on the tab for the first worksheet and "move or copy...". »
  In the dropdown select '(nouveau classeur)' and check 'create a copy '.
  Save the new book in any format.
  Try to open the new book

  Option 3
  Open the file (it may take a while)
  Run the following with the first worksheet selected VBA:

  Void ClearFunctionCache()
  For each oShape in ActiveSheet.Shapes
  If LCase (left (oShape.Name, 19)) = "workbkfunctioncache" then
  oShape.Delete
  End If
  Next
  End Sub

  Save the new book in any format.
  Try to open the new book

  In any case, try the refresh operation and save and reopen the file to ensure that the problem does not return.

  Make a backup of the original file before making any changes.

• How to force Excel to open and update links

  I have a .xlsm for Excel Macro file I send data to and receive results based on that data are calculated. Some of these calculations are through a .xla link. NORMALLY when a man opens the file, the linkis opened and updated and everyone can go about their business.

  I found myself explicitly link opening with another open statement of workbook, but that's not fair right way. What happens if the .xla changes its name, or is moved? There must be a better way. Excel macro recording even managed to give me the explicit path and not an average programmically to open it as Workbook.OpenMyStupidLinksYouFool. Ugh.

  For reference, I tried to add parameters to the command open and compiles incorrect Diadem and he said I can't use parentheses. There are already some parenteses. huh?

  Open method of Excel:

  https://msdn.Microsoft.com/en-us/library/Office/bb179167 (v = office. 12) .aspx

  Safe:

  Excel.Workbooks.Open (sPathDocuments & "" & DiademExcelWorkbook)

  Error:

  Excel.Workbooks.Open (sPathDocuments & "" & DiademExcelWorkbook, 3)

  Hi sg.

  The specific error that you got has nothing to do with DIAdem or Excel. If you want to call a function in a VBScript script that has several parameters, and if you use parentheses in the call syntax, then the prefix 'Call' is necessary.

  Call Excel.Workbooks.Open (sPathDocuments & DiademExcelWorkbook, 3)

  I'm not sure what you were up to with the & "" & construction, so I simplified it is above.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• When open my photo album file and clicking on a photo to see the excel program opens the image viewer.

  I open an email with pictures.  When I click on the photo attached to the view, the excel program opens and not the image viewer.

  One of photo accessories save somewhere you can find it (for example, your desktop computer).
  Right-click on the file that you saved and select open with, then select "Choose program" (at the bottom of the context menu).

  If the program you want to use is listed as one of the "recommended programs", select it, click on the box to "Always use the selected program to open this kind of file" and click OK.

  If you want to use the Windows Picture and Fax Viewer to view photos (personally, I like free IrfanView better) AND it is NOT listed as a program "recommended" or under "Other programs", follow the instructions below:

  in Windows Explorer:

  • On the Tools menu, click folder... Options
  • Click the File Types tab.
  • Scroll down to the extension that you like, for example "JPG".
  • Press the restore button, if it exists.
  • Press the Advanced button.
  • Click the Open action.
  • Click on change...
  • In the Application used to perform action: enter C:\WINDOWS\system32\rundll32.exe C:\WINDOWS\System32\shimgvw.dll,ImageView_Fullscreen %1. "C:\WINDOWS" is the directory that contains your Windows installation.
  • Press OK

  You'll want to repeat for each extension (GIF, JPG, JPEG, etc.) for which you want to change the behavior.

• Problem opening of HTML forms "Find Service request" and "Create Service Request"

  Hello

  I'm working on the establishment of a date for the Service of the EBS, and I'm unable to open forms HTML 'Find Service request' and "create Service request".

  I get the error message:

  Oracle error - 20001: ORA-20001: APP-FND-02902: option profile Multi-Org is required. Please define either MO: MO or Security Profile: profile of operating unit option. has been detected in MO_GLOBAL_INIT.

  I have knowledge of EBS min set up and configuration. We simply use EBS as a source system for our ETLs.  Please suggest no work around to solve the problem.

  Thank you

  Kishore

  Go to the responsibility of the system administrator > profile > system. Search for the profile MO: unit operating and under field of responsibility, put in the name of responsibility you use to create the service request, click OK, and enter the value you want in the next window operating unit. He shoots to the top of all the defined business units and you can choose the one desired.
  

  
  

  Thank you

  Shree
  

• Chinese characters appear from nowhere, then using find and replace in dreamweaver

  It is a strange, Chinese characters appear from nowhere, then using find and replace (in the folder) in dreamweaver. the replacement text is Chinese characters on the open document, others are ok

  Sounds like the Configuration of your entire file is damaged.

  Rename your folder Dreamweaver MX\Configuration Old_Configuration.

  When you restart Dreamweaver, it will create a new Configuration file for you.

  Good luck!

  Nancy O.

• I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

  I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

  It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.

• I opened the window and 1-2 sec it close and open and close only I can't use firefox what should I do?

  When I open firefox, it opens and after 1-2 seconds it closes so I can't do anything and it will open and close automatically several times.
  I have uninstall for a month of waiting for the new version hopes can solve this problem, but he cant last vertion is 37.0.1 now 38.0 I used Windows 7
  What should I do?
  I always use firefox be my browser. But if this problem cannot be resolved, so I can't use it

  What happens when you start Firefox in Firefox SafeMode?
  https://support.Mozilla.org/en-us/KB/troubleshoot-Firefox-issues-using-safe-mode#w_how-to-start-Firefox-in-safe-mode