used to synchronize nano

Similar Questions

• Firefox Sync active but used to synchronize

  Hello. I can't synchronize my old Surface Pro 2 on my new Surface Pro 3 Firefox.
  Both are running windows 8.1. Firefox sync OK for over a year on my Surface 2 OK but I lost the password.

  On SP2, I updated FF, deleted the old account synchronization and set up a new sync account. SP3, I have implemented the same account.
  When I connect to the sync SP3 account, the message "synchronization will begin momentarily" displays but nothing happens.

  Following suggestions from the forum, I made these changes both SP2 and SP3.
  1. disconnect, then reconnect to synchronize.
  2 delete the signedInUser.json file in the Firefox profile folder closed and possibly delete the folder of armor as well.
  3 remove and re-create the account FxA. at https://accounts.firefox.com/settings

  I also reinstalled FF on SP3. Same message, but used to synchronize.
  Appreciate any suggestions.

  said offspring

  Hello. I can't synchronize my old Surface Pro 2 on my new Surface Pro 3 Firefox.
  Both are running windows 8.1. Firefox sync OK for over a year on my Surface 2 OK but I lost the password.

  On SP2, I updated FF, deleted the old account synchronization and set up a new sync account. SP3, I have implemented the same account.
  When I connect to the sync SP3 account, the message "synchronization will begin momentarily" displays but nothing happens.

  Following suggestions from the forum, I made these changes both SP2 and SP3.
  1. disconnect, then reconnect to synchronize.
  2 delete the signedInUser.json file in the Firefox profile folder closed and possibly delete the folder of armor as well.
  3 remove and re-create the account FxA. at https://accounts.firefox.com/settings

  I also reinstalled FF on SP3. Same message, but used to synchronize.
  Appreciate any suggestions.

  Offspring again: problem solved!
  Pending a response I connected again to Sync on SP2 and SP3. Same message "Sync" momentarily but no synchronization.
  Then I noticed the menu bar missing on SP3 FF. While fixing that I found your Q & a on how to fix corrupted toolbar - go to Menu/customize and click on "restore default settings".
  Who has accompanied me through the beginning of FF upward. I chose FF as my default again BUT this time on the next step that I choose to use Firefox NOT Internet Explorer. (on my FF 1st installation I chose it is because the choice of FF produces a message that IE cannot complete installation).
  Makes synchronization of SP3 immediately synchronized with SP2!
  Trusting that this hotfix helps anyone with the same issue.

• My hard drive died suddenly, and after that I am unable to find my old favorites (used the synchronization of the former). Bookmarks are on your server, can I get back them?

  I have the key to firefox sync (used for synchronization of the former) and everything, but of course it is unnecessary with the new synchronization system. One of my ideas was to connect to my office computer, sync all bookmarks, and then switch to the new sync - but unfortunately being unused for years, it turns out that the monitor was dead, and the graphics card seemed to be roasted (felt like it anyway).

  Any ideas?

  This may not work (Firefox sync isn't a backup system, so this will probably fail), but it's worth a try:

  • Download Firefox 28 of ftp://ftp.mozilla.org/pub/firefox/releases/28.0/win32/en-US/ (do not use what anyone other that recover your sync account, it is not safe and should not be used on the internet)
  • Connect to Firefox Sync, download your data.
  • Upgrade to Firefox 33.1.1 (Update Firefox to the latest version)
  • Updated to the new Firefox Sync, synchronize your bookmarks from Firefox, history, passwords, etc.

• Used to synchronize some titles in the Playlist?

  I hope someone can restore my sanity. I recently signed up for music apple and wanted to add a few old songs to a playlist. There are about 30 songs, and then I tried to sync them to my Apple Watch. All titles in the playlist are downloaded on my iPhone. However, there are three songs that do not appear to Sync? More precisely-Sweet Emotion (Aerosmith), Psycho Killer (Talking Heads) and Big Shot (Billy Joel). But since it was in a greatest hits albums, maybe there is a problem... but even after adding them to my list of the original albums (toys in the attic, the 52nd Street and the talking Heads 77). Used to synchronize the SAME SONGS.  Why?  Any ideas?

  It can help to experiment with the addition of problematic tracks to your playlist synchronized one at a time.

• How can I use an ipod nano that was synched to another computer?

  My daughter gave me his 2nd generation ipod nano because it is no longer use it.  When I plugged in my USB to load, I got a message informing me that there is an update.  It would not be updated beause "ipod cannot be updated because it contains files that are used by another application."

  What should I do to be able to use this ipod nano?

  I don't think that this message is related to the iPod is synced to another computer...  It is usually other applications or processes on the computer (which is not iTunes) accessing the iPod for some reason if iTunes is not able to perform the update.  However, your question in the subject heading ("How can I use an ipod nano that was synched to another computer?") is valid, since the iPod was previously used by someone else, with a different iTunes library.

  If you want to start using this iPod with your iTunes library and put on your songs, instead of doing an Update, you need to restore.  This erases the iPod, reinstalled the latest version of the software, and sets it to the default settings.  The iPod gets a 'new beginning', as when it was new.  To resolve the problem with this "files in use by another application" error message, try restarting your computer.  Immediately after the computer finishes starting up, run iTunes, plug in the iPod (if it isn't already) and try to do the restore (or Update).  If you still get this error message, please after return.

  If you are restoring, you can configure it to sync with your iTunes library.  You can post back, if you need advice on options for the implementation.

• My mcbook used to synchronize my iphone6 it again to get the new version on computer and I have the new version of iTunes versionThis (11.4) is the current version.

  My mcbook used to synchronize my iphone6 it again to get the new version on computer and I have the new version of iTunes versionThis (11.4) is the current version.

  iTunes version 12.3.2 is the latest version of iTunes.

  http://www.Apple.com/iTunes/download/

• Used to synchronize calendar

  I had two versions of Palm on my computer at the same time. Now just access.

  Agenda always has previous calendar and used to synchronize my calendar of events.

  How can I get rid of the other calendat file?

  2 versions of Palm Desktop, 2 different user names or 2 different devices using the same version of palm desktop are you referring?

  When you schedule and Agenda of the files which usually indicates that you are upgrading to a new handheld to an old parity which was the appointment instead of calendar request.

  Did you improve any and old model of Pocket?

  Is the previous calendar the current username in Palm Desktop?

  You can delete the calendar information. in the username on the PC folder.

  Message relates to: Palm i705

• Used to synchronize synchronize my Blackberry Curve 8330 Smartphones blackBerry with Outlook and Yahoo contacts and calendars.

  Used to synchronize my Blackberry Curve 8330 to sync with my Outlook & Yahoo contacts and calendars.  There is no error message, it just don't do.  Any suggestions?

  You can upgrade to 4.7 WITHOUT Media Manager.  Some people have problems with the MM.  It's also a great Setup and it is easier to use the drag-and - drop in windows Explorer with the lit on your BB mass storage mode.

  Personally, I use DTM 4.6 without MM and have no problem.

• my trusty Palm 750 (at & t) used to synchronize with Windows 7, 64-bit.

  original title: Palm Treo 750 GSM Smartphone

  Looks like my trusty Palm 750 (at & t) used to synchronize with Windows 7, 64-bit.

  It is understandable and disappointing.

  Is there any kind of emulator-type of a solution to synchronize?

  I ask because I don't have a data plan and need the cable to maintain contacts and calendar on the terminal entrances.

  Thank you

  Mike

  Hello
  
  I suggest you contact your hotline and check if it helps.
  
  http://palmsupport.org/Palm-support
   
   

• Outlook not available mail and used to synchronize with the Mail application.

  Original title: Outlook unavailable Mail

  My outlook mail said * address email is removed from the privacy * unavailable and used to synchronize.  I rebooted, reset my mail, reset my computer.  No luck.

  Outlook.com has had an interruption of the service last week that lasted a few days intermittently.  Probably, you were one of the affected users (it depends on what server your account performed).  They kept everyone has indicated that they have restored the system to service on status.live.com.

• 6th generation Nano more often used to synchronize

  Just got a used iPod Nano 6th generation, and I'm in trouble.

  I have an iMac 27 inch, model late 2009, running El Capitan. I have the latest version of iTunes.

  When I connect the iPod to the computer via most of the USB sites, it does not appear in the Finder as a mounted drive. However, it fact appear in system information under Bus USB 2.0-> Hub-> iPod. The system seems vaguely aware that there is a connected iPod, but doesn't let me do anything with it. The iPod itself says that it is connected, and it charges with success.

  However, when I plug the iPod into either of the USB slots on my Apple wired keyboard, it fact appear in the Finder. Basically, on 6 slots USB (4 on iMac) and 2 on the keyboard, it will only reveal when it is connected to one of them.

  Once I got it in the right port USB, iTunes has been able to recognize the iPod. However, it seems especially want to synchronize. Usually it hangs there for several minutes while trying to synchronize before you say it's impossible: "iTunes could not copy X to iPod Y because the file cannot be read or written.". At this point, there usually is no longer appears in iTunes (even if it is mounted in the Finder).

  Sometimes successfully, it syncs, but 90% of the time that it just hangs up. I don't see a model when this happens. I wrote this, I was able to do accept a synchronization of two podcasts and a song, and then it stopped working again.

  I tried to reset the iPod and be in and out of disk mode. I was unable to restore factory default via iTunes: nothing happens for awhile, then iTunes says that it cannot.

  I tried to manually add files to the iPod by dragging on in the Finder. This usually causes Finder hang and then must be restarted. In some cases, I can't even restart Finder until I pull the cable the iPod, as the whole system crashes.

  I used on the iPod disk utility, to fix all the errors (he found) and to clear its contents.

  I wonder if this is related to the USB cable, but I guess my thought is that if the cable was defective, wouldn't I have not have done until now? It shows in the Finder, cool and sometimes allows to synchronize a file. But I could well be wrong. Before I go buy a new one, I thought I would check here to see if it could be something else.

  Any help is appreciated. I have this during 4 hours, try different things, read troubleshooting guides, forum posts, etc.

  Your Mac is old enough to have ports USB 2.0, so your 6th gen iPod nano should work well with it.  My Mac mini's 2011 (last iTunes and OS X running); It works very well with my old iPods; most of them are older than your iPod nano.  It should work on the direct USB ports on your iMac.  It is strange that it works a little better on the free USB port on your keyboard.  Normally, I would suggest using a direct USB port on Mac when troubleshooting.  And your USB cable is probably fine; I would bad cable try another cable or using your cable power with another Apple device (if possible).

  First, you must use the procedure to Reset SMC (System Management).  It serves as a general hardware reset for the Mac.  For an Intel iMac, it's basically unplug the power cord from the iMac and reconnect it, at the end of a specific procedure

  Reset the management system (SCM) controller on your Mac - Apple Support  (see Reset the SMC on Mac desktops)

  You can also make the correct procedure to Reset NVRAN ("PRAM") ol ', just in case...

  How to reset the NVRAM on your Mac - Apple Support

  NOW, you can try some real tests to narrow down the cause of your problem.  These are separate test.

  (1) stop (power off) Mac and disconnect all the USB devices.  You can leave your connected USB keyboard/mouse.  Do this Reset (reboot) of your iPod

  Learn how to reset your iPod - Apple Support

  Start the Mac, launch iTunes and connect the iPod to a USB direct on the Mac, by himself.  Is there a difference?  This is to exclude a conflict between connected USB devices.

  (2) the iMac in Safe Mode startup

  Try safe mode if your Mac does not end commissioning - Apple Support

  In Safe Mode, the extensions of the system of third parties (such as device drivers) are not loaded when you start.  In addition, the third party background processes that launch automatically when the connection do not run.  This is to exclude a conflict with a third party software that may interfere with the iPod.  Your iPod should (normally) always connect with iTunes in Safe Mode.  Try things like the synchronization and restore in iTunes.

  (3) create a new 'Test user' account in the users and groups System Preferences pane.  I have a user account on my Mac named Test user.  This user account can be Standard (not administrator). Disconnect , then reconnect you user account.  Do not use Quick user change.  In the new user account, run iTunes and connect your iPod.  iTunes uses a new iTunes library.  Add a few songs to test the library.  Try things that don't work well in your usual user account.  This is to rule out a problem related to your usual user account or iTunes library.

  (4) you can do another test, if you have something like an external drive that can be erased.  Use the Setup program for El Capitan downloaded from the Mac App Store to install an external OS X "fresh" on the hard drive system, after erasing it in disk utility.  Startup test of external drive system.  Launch iTunes, plug in the iPod and try even.  This is to rule out a problem with your existing system of El Capitan, which can inherit problems that you apply updates over time.

  In each case, if the iPod works normally for this test, you have reduced the cause.  You can then focus your troubleshooting to find the exact cause.  Please post back with new discoveries...

• iPod nano (3rd generation) used to synchronize with Itunes on a XP computer

  I have an Ipod nano 3rd generation that seems to have stopped. The only thing I see on the screen is the apple logo. I tried to reset a dozen times (at least) and installed the latest version of Itunes, but nothing helped. I do not see the ipod appears as a device anywhere on my computer. I downloaded SyncToy 2.1, but when I tried to install it I got the following error message:

  Component Microsoft Sync Framework 2.0 Core Components could not install with the following error message:
  "A fatal error occurred during the installation of Microsoft Sync Framework 2.0 Core Components".

  The following components were not installed:
  -Microsoft Sync Framework 2.0 Provider Services

  The following components failed to install:
  -Microsoft Sync Framework 2.0 Core Component

  Any suggestions?

  Julie

  Using MS Sync something won't solve your problem. Normally, you need iTunes to transfer music/videos etc. to and from iPods, phones etc. keys. Or you can buy the 3rd plugins for WMP, such as MGTEK Dropsi.

  Your problem is that the iPod nano seems to be frozen, I would try to leave a post on the Apple site as its more a problem for them than Ms. You need to find on how to make a plant of re - put in order for UN - gel you Nano.

  See you soon,.

  Jerry

• used to synchronize iPod classic

  Hi, I have an classic iPod 160GB 2007 suddenly used to sync in iTunes. He recognizes the iPod, but then takes ten minutes to "check" and then told me that the ipod "cannot be synchronized because it cannot be read from or written into. I've updated to iTunes 12.3.2 but I still get the same message. I'm on a MacBook Pro running 10.9.5. I did not restore but because when I had problems with a Nano and restored, the problem has not been fixed. And I use the current software for the classic - 1.1.2. Any suggestions would be much appreciated. Thank you!

  Are you using a Mac or a Windows PC?  If Windows, what version?

  A test, turn off the computer and unplug all the USB devices.  You can leave standard keyboard/mouse USB connected, if used.  Do this Reset (reboot), the iPod

  Learn how to reset your iPod - Apple Support

  Computer, run iTunes and connect the iPod to a USB direct on the computer by itself.  Try to synchronize again.

• used to synchronize calendars purchased at the office

  I have two calendars, I subscribed to on my iphone, but they don't synchronize or show up on my other devices. On my phone, they appear under "Subscriber calendars" but they don't appear anywhere on any of my desk calendars. Any help appreciated.

  John,

  Subscriptions to calendars use iCloud - Apple Support can help determine why this is happening to you.

  

• Sync just used to synchronize

  I've never used before sync but have a new computer and need to transfer the history and bookmarks from your old computer (which is returned under warranty). I spent many hours trying to get the sync to work without success. Yes, Firefox has been updated on the old computer.

  I have create a Firefox account and choose what I want synchronized, check the account and get the message that the account is verified. Then, I followed the various strategies suggestedby the Firefox guide and other online - click e-mail next to the sync icon, click the sync button, go to tools and click "sync now". Nothing happens. I restarted Firefox, and my cell phone between these different attempts.

  First, a "Comments" section appears saying ' Sync enabled: Firefox will start sync momentarily "."

  This isn't. Waited until 10 minutes. Nothing happens. Click the Sync button - nothing happens, has got to tools and select "Synchronize now" - still nothing.

  Some people with problems to receive a message. But in my case - nothing! Just does not. Have disabled firewall, etc. and makes no difference, still nothing.

  So I have no idea as to why it does not progress

  As this must be sorted out in the next 24 hours as old laptop being picked up Monday, hoping someone can suggest a solution.

  Thanks in advance

  So, eight synchronization events were successful and the last of them was a mistake?

  Not very amount of data transferred so far, but it seems it's reconnection to the server every 8 to 10 minutes and the transfer of certain data each time. I have who would monitor data transfer up to the stop.