Useful info for people who are stuck with the Portege 3490CT

Similar Questions

• Questions for those who are familiar with the animation in PS CS6

  I'm working on a project, the goal is to have a .swf as thisanimation. I can create it in photoshop, but it doesn't have some features that I need.

  1 I want my movie to rotate full and stop, that we have a rotating image continually.

  2. I would like the position of the mouse to control the direction of rotation after that.

  I'm sure that I can achieve this in Flash, but we do not have it in the office and cannot justify buying it immediately. Is it possible to add this feature to our .swf in photoshop? ActionScript? a plug-in I do not know of?

  any help would be appreciated,

  Thank you.

  Yes I think you are right, there is no way for this end in photoshop. I built it out in flash very quickly on the otherhand, so it seems that this is the way to go.

• BlackBerry smartphones to reach this message to all those who are unhappy with the new update.

  Everyone who is angry with the new update (missing Key Lock, lack of contacts, etc.) please say it here.  Maybe if we get enough people to join on a post, they're going to do something.  I did have to use a password to lock my device actually.  Most of the phones on the market today have a simple way of locking keys.  In addition, the new software seems to run slow and slow.

  Just type that you agree, maybe they will get the idea.

  In addition, when you set a password on the device you can then have a lock on the device icon.  By pressing the K key locks the device as well.

  Without setting the password, then the lock button lock icon on top (see image below) will make a keypad lock regular, similar to the old removed sleep function. AND, you can press on and hold A to lock the keyboard.  K button does not work when a password is not set.

  Hold the button mute for sleep has been removed.

  

• Radial and graduated filters are stuck with the selection of the red zone. All solutions?

  Hello!

  Last days I had this strange problem with my radial and graduated filters. Normally you have to hover over the center point of the filter to see the radial or graduate area it affects. It's this heavy red color.

  My problem is that this function is active at all times, unless I hit ESC or click somewhere else to deselect filters. I've never seen this problem before the upgrade to Lightroom CC. It is therefore impossible to see live changes make you with the filters and which makes it very difficult to see these small changes and the effects it has on the photos. I've managed to select a stupid option somewhere? I can't find all these settings now. Right click or by clicking on the panels have no effect either.

  If anyone seen this before? Any suggestions as what to do?

  Hit 'o' button to activate the overlay deactivation/activation

• Cannot use Scripture inking on 10 to win with the Portege Z20t

  When I go to control panel input method to win 10 I can't select ink as input method.
  I have the latest version of the Wacom software.

  How can I activate "further" input method (write)?

  I also have this problem after the upgrade to Windows 10. inking Panel disappeared and there is no way to enter data in tablet mode. The pen works elsewhere, but the stylus input option is grayed out in the keyboard selector.

• I have a problem with error 53.I know this mistake is for people who have their iPhones fixed by a third party before, the thing is my iphone 6 was never taken to a third party before, so all opinions

  I have a problem with error 53.i have 6 + and I m out of warranty. I know this error is for people who have their iPhones fixed by a third party before, the thing is my iPhone 6 + was never taken to a third person before, error 53, it isn't my fault .i was going to do a upgrade to the new version

  All view of what can be done

  If your device is outside its warranty, you can always make an appointment at the Apple Genius Bar to have the studied unit. 53 error will also occur if there is other material errors that are not defined on the device. One of them has to do with contact IDS. Your Touch ID was never working, or did it stop working? Have you had damage to the device by dropping, water damage or damage to the 'home' button?

  Apple can examine the device and determine your options. You will also be flooded with other options for independent repair facilities, however before turn you to this, understand that their work on your device will void any support post-warranty Apple, and there is no way of knowing that the qualities of these repair facilities, as they are not certified by Apple, as Apple does not certify independent repair facilities. If you decide to go this route, be sure to only find a way to check the reviews, etc..

• How can I email a card for people who use my SkyDrive?

  How can I email a card for people who use my SkyDrive?

  How can I email a Christmas card to people who use my SkyDrive?

  It has nothing to do with Word, but you either put the Christmas card in the Public folder and send link to this folder for people who want to 'receipt' card, or create a new folder and invite these people to access this folder in which you put the Christmas card.

  Should ask questions about SkyDrive in http://windowslivehelp.com/

• Facebook photos won't will be displayed beside the names of people who are online

  When I log into facebook I watch people who are online and noticed that their photos are not displayed to the top

  It is possible that you clicked on 'Block the pictures' from the context menu in an attempt to save an image.
  Check the image exceptions: Tools > Options > content: Load Images: Exceptions - see the web content, pop-ups, fonts and language settings

  A way to see what images are blocked is to click on the favicon (Site ID icon) on the left side of the address bar.
  Click on the "More information" button opens the Security tab of the "Page Info" window (also accessible via "tools > Page Info").
  Go to the tab Media of this "Page Info" window.
  Select the first image and scroll though the list with the arrow pointing downwards.
  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  See also the problems that cause to not show images and http://kb.mozillazine.org/Images_or_animations_do_not_load

• How can I stop the transfer of emails for those who are not selected

  I don't know if my hotmail works properly... cause it sends e-mails to people who are not selected for?

  Mary

  Hello

  As you use Hotmail and Hotmail-related question you have posted. I suggest that you post you query on the Hotmail forum for assistance:

  http://windowslivehelp.com/product.aspx?ProductID=1

• Unable to connect to oracle DB using VBA and you are prompted with the error:-the client components and Oracle network have not been found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or installation of the

  Hello

  It would be helpful to me if someone can give me instructions on setting the version of driver or oracle client required to connect to the the Oracle DB using excel VBA

  My config: -.

  Windows - 8-64 bit

  Excel 2013-32 bit

  The components of the client / I should install, and how to solve the question below...

  I tried the VBA code... but you are prompted with the error message above

  Void Oracle()

  Con Dim As ADODB. Connection

  Dim rs As ADODB. Recordset

  Dim query As String

  The con value = New ADODB. Connection

  Set rs = New ADODB. Recordset

  strCon = "Driver = {Microsoft ODBC for Oracle}"; "." & _

  "CONNECTSTRING = (DESCRIPTION ="& _.

  "(ADDRESS =(PROTOCOL=TCP)"& _

  "(HOST = HostNumber)(PORT=PortNumber))" & _

  "(CONNECT_DATA = (SID = SIDNumber))); UID = username; pwd = password; »

  con. Open (strcon)

  If err. <>Number 0 then

  MsgBox ("Oracle error:" & vbCrLf & err.) Description)

  On the other

  MsgBox ("Oracle DB Connection successful.")

  End If

  End Sub

  I'll replace it with the values of host origin...

  Thanks for the suggestion you till u gave...

  complete solution is in the link below...

  https://itkbs.WordPress.com/2014/07/28/how-to-install-ODBC-driver-for-Oracle-in-Windows-7/

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• SE "There are problems with the configuration of static files in your environment" after the APEX 5 install using Oracle HTTP Server

  There is not much information in the doc around the new configuration of static file.  Someone at - it an example of this dads.conf he file should look similar to static files?  Everything else seems to work fine - it's my only hang up now.

  Thank you!

  Exact pop-up message:

  There are problems with the configuration of static files in your environment.  Please see the section "Configuration static file Support" in the Guide of the Installation Application Express

  I figured it out on my own - the doc has a section "6.5.4 configuration Support for static file" which basically said yes, it is now supported for static files, then a "see also:" link to the dads.conf section, that I'm not good enough to see there are now 2 new parameters in your dads config file...  All is ready!  It works!  YAY!

• What I need to buy other products such as CC Photoshop and Lightroom for them to be integrated with creative cloud? Or do I have to understand that the versions of these products are delivered with the purchase of 9.99?

  What I need to buy other products such as CC Photoshop and Lightroom for them to be integrated with creative cloud? Or do I have to understand that the versions of these products are delivered with the purchase of 9.99?

  TC III

  The $9.99 rate is only for Photoshop and Lightroom. The entire Collection of CC is $ 49.99 per month.

• Devices that are compatible with the Tablet HP Jet 7 Signature Edition

  With HP Jet 7, what Bluetooth wireless keyboard and optical mouse will work with it?

  Also, I buy a wireless printer to use as well - I have to be aware of?

  I'm starting a blog with limited capital. Thank you to everyone who contributes to the cybercomputability of us all.

  Hello and welcome to the HP support community!

  Ask us the question, "what should I buy?" is difficult to answer.  We do not know your needs or preferences (others you have "limited Fund").  There are hundreds of printers with wireless capabilities.  Still, we don't know what you're wanting - ink jet, laser, color, photo printing capacity jet, absolute who is cheapest available?  Print you hundreds of documents per month, or two or three?

  You ask strictly for HP products which are compatible with the Tablet?  All/all products from other manufacturers?

  If you are expected to produce a list of all the possible volumes that work, it won't happen...

  In theory, any BlueTooth keyboard or mouse designed to work with a Windows PC should work.  HP made several.

  Most wireless printers use a wifi network.  It will help if you have one at home - an HP ePrint printer can print a file from anywhere in the world if connect you to a network home.  No network?  There are other printers that can print directly using wifi.

  Think about your needs first, and then balance the costs involved.   It would be useful you ask on the printers in the printer of the Forum sections.

  WyreNut

• VMWare Studio is stuck with the transitional VM does not complete the PostInstall script.

  Hello

  I ran into a situation where the Studio VM got stuck with the post-installation script control that went wrong. The failure is shown in the Studio hanging as shown below.

  Build-a-failed/hung:

  2009-11-30 10:57:29 more than 30 minutes are elapsed during the configuration of the virtual machine.

  2009-11-30 10:57:29 if there is an abnormally long time to commissioning of your virtual machine

  2009-11-30 10:57:29 to complete, please check that the construction is progressing

  2009-11-30 10:57:29 observing the < 192.168.122.75 > console of the virtual machine being put into service.

  2009-11-30 11:28:06 more than 30 minutes are elapsed during the configuration of the virtual machine.

  2009-11-30 11:28:06 if there is an abnormally long time to commissioning of your virtual machine

  2009-11-30 11:28:06 to complete, please check that the construction is progressing

  2009-11-30 11:28:06 observing the < 192.168.122.75 > console of the virtual machine being put into service.

  What's happened is that the transitional VM has restarted before the post-installation script came out. However, in the past, I had noticed that the VM Studio that recognizes and cleans. In this case, there no cleaning. A previous generation succeeded as shown below. My question is if there is any command the virtual machine of comments/provisional, which 'determine' the completion of the Post-Install, so the Virtual Studio machine can pick up and transfer/package the bits of the vmdk disk images and give me a successful build? I know that all the elements of post-installation script had been completed successfully.

  If the build was successful:

  2009-11-30 05:01:41 if there is an abnormally long time to commissioning of your virtual machine

  2009-11-30 05:01:41 to complete, please check that the construction is progressing

  2009-11-30 05:01:41 observing the < 192.168.122.75 > console of the virtual machine being put into service.

  2009-11-30 05:18:11 the transient VM is now in offline mode. Post-OS Setup log file recovery...

  2009-11-30 05:18:11 installation is complete.

  2009-11-30 05:18:11 post-OS installation error checking...

  2009-11-30 05:18:12 VM carrying host provisioning to Studio; This may take a few minutes...

  2009-11-30 05:53:15 provisioning host cleaning...

  2009-11-30 05:53:15 checking if provisioning session is still alive and the transient virtual machine is always on.

  2009-11-30 05:53:36 Unregistering transitional VM configuration host.

  2009-11-30 05:53:36 remove transitional VM configuration host.

  2009-11-30 05:53:38 the development of the virtual machine.

  2009-11-30 05:53:38 packaging of the virtual machine.

  In the normal flow, you shouldn't have to do something special for "cessation of distribution".  The VM output should be in/opt/vmware/www/build / < instance-bld > / export dir in the VM Studio when using Studio to build a W2K8 device without your installed application. The Studio build process is now out of the picture. You can then copy or import the virtual machine to your platform of choice virtualization, power, install your application, closing. And copy (or distribute) the VM whenever you want.