User account control dialog box causes PCoIP disconnect

Similar Questions

• Why Firefox 33.1.1 requires a prior user account control dialog box of the load?

  I can't stop FF to require that the dialog box controls user account until it loads. I uninstalled and reinstalled a clean copy, what worked the first time and then restored the UAC dialog on subsequent startups. It's incredibly annoying. It's never happened before with FF. How to stop this behavior? I'll stop using the Goner program if it cannot be repaired.

  Make sure that Firefox is not set to run as administrator.
  Right click on the desktop Firefox shortcut and choose "Properties".
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.
  If you can't make the changes, then you must start Windows Explorer as an administrator.

• Recently programs will not be installed unless do a right-click and do 'run as administrator '. Problem of UAC (User Account Control).

  I suspect something is wrong with my installation of Windows, what can be done to make the programs to install normally, which is more secure (doesn't allow not programs administrative privileges during the installation).

  The "User Account Control" dialog box never appears like this: http://goo.gl/CbsXF

  Thank you
  Dan

  Hello Dan,.

  Create a new user account and check if the problem persists, if the problem does not persist in the new user account, then you can fix the damaged user account.

  Create a user account

  Difficulty of a corrupted user profile

  Hope this information helps.

• Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  I use the version of Vista Home Premium.

  While I don't really like how the UAC area enters the information that tells it when to display the box tell me about your work of things on the UAC (I know an article exist on the web), is not how to answer this question.

  There is no log of UAC elevation file.

• Problem of UAC (user account control)

  I've had this problem for quite a while now, and it's really fustrating. I can't download anything without the UAC (user account control) asking me to enter my administrator password. I know, but, in the UAC dialog box, I do not see where to enter it. Problem with UAC, impossible to make changes to my laptop. I can't change my security settings, download from the internet...  Please help me

  Hello

  You can enable UAC who do a lot.

  You can also enable the UAC SILENCER or STOP if it lowers you the level of security.

  THIS UTILITY MAKES IT EASY TO

  http://www.tweak-UAC.com/
  Tweak UAC utility - easily put UAC into Silent Mode or POWER

  --------------------------------------------------------

  To solve the problems:

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed. References to Vista also apply to the
  Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  If necessary:

  To make another account with your same password - ADMIN upgrade - REBOOT (do not only closing session) and
  connect that account - you can download to use it? (do both ADMIN - one accounts in case that you
  migrate to it and another to test and difficulty).

  It while in the new use of the account to LOWER your account regularly APPLY / OK to need - and then lift back
  for the ADMIN - repeat several times - descent - go downstairs - raise - repeat. This allows to clear corruption.
  Make sure that the account administrator.

  Try your downloads into the new account.

  If necessary later this is the process to fix a damaged account or migrate to a new.

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  ---------------------------------------------------------------------------------------

  Then connect to the old account and try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Need to change user account control settings, but cannot access (windows 7Prof.-64 bits)

  Hello

  With Windows 7 Professional 64 bit laptop

  I am the 'Standard user' and the only user of my laptop.  I don't know if I have an administrator account.  I could have or something with a similar name when first setting up laptop and loading Windows program (a few years ago).  But I remember he was causing Windows always show both accounts and choose one to log-in to.  I didn't want no choice since I am the only user of the laptop, so I understood how to make to get rid of the other account (admin?) and kept the Standard user because 'Help' instructions, said it should be used.

  There are so many programs that I can not open because the user account control box "do allow you the following program to make changes...?   The choice of 'Yes' is NEVER highlighted or available - that the choice of the 'no' can be clicked.  And the same dialogue box asks also but it is not a place to type the password "Administrator".  I don't even have a Director. Password, or a password to the Standard user account.

  And I am referring to all kinds of programs that can not open, as "Windows Malicious Software Removal Tool" that I downloaded from the Microsoft Web site.  Or I went into control panel 'User account', but try clicking on 'Change settings User Account Control' brings the same view, "do allow you the following program to make changes to the computer?  Or when, on the page of computer system, I can't access 'Advanced System Settings' due to the same dialog box.

  How to solve this problem?  I'd rather not have the choice of Auditors when Windows opens.  I looked through other similar topics here (only Windows 7 partners), and some seek to make changes to the registry.  It's very intimidating for me.  I'm not a computer scientist at all, but fairly intuitive with the computer.  The problem cornered me.  Another opinion on a thread is said to use "Fix It".  This program is no longer available (we now 2016).  I also experienced this problem all this time but am pretty frustrated and wanted to try the job.

  Should I re - load the Windows program and do something else?

  I hope someone can provide some less intimidating process that touch the registry to fix this.  I really appreciate it.

  Thank you!

  Massachusetts

  I could have or something with a similar name when first setting up laptop and loading Windows program (a few years ago).

  -> Yes, you did.

  I understood how to make to get rid of the other account (admin?) and kept the Standard user because 'Help' instructions, said it should be used.

  -> It was a bad decision. It was equivalent to throw out your safe master key. There is a much better method to avoid the choice between multiple accounts.

  I don't even have a Director. Password, or a password to the Standard user account.

  -> You had an admin password when your first install Windows.

  I'd rather not have the choice of Auditors when Windows opens.

  -> It takes 30 seconds to remove this choice, without loss of the admin account.

  Some seek to make changes to the registry.

  -> Hacking the registry does not restore your account admin. 'Fix It' will not fix it either.

  Should I re - load the Windows program and do something else?

  -> Your first step must be to determine what accounts you have and whether they are active. It is done as follows:

  1. Mark the first line of code below with your mouse, then press Ctrl + C to copy it.
  2. Click the Start button, press Ctrl + V to paste the code in the run box, and then press ENTER.
  3. Marks of the second line of code below with your mouse, then press Ctrl + C to copy it.
  4. Click the Start button, press Ctrl + V to paste the code in the run box, and then press ENTER.
  5. Open the desktop Accounts.txt file, then copy & paste its contents into your answer.

  cmd.exe /c users > '% userprofile%\Desktop\Accounts.txt '.

  cmd.exe /c net localgroup administrators > '% userprofile%\Desktop\Accounts.txt '.

• Windows 10 continues to change user account controls

  Why windows done 10. change user account controls, it's extremely annoying. Whenever I reboot it disables it, which blocks all applications. Why he won't stay where I leave it?

  While I can only say that malware has installed a utility that removes the UAC setting when Windows loading [in the hope that you don't notice the change, and that malicious software can therefore go further by installing other malware without bringing a challenge Admin dialog box].  This problem was reported some time ago and finally diagnosed as a symptom of malware - see Windows 7 UAC (user access control) is disabled on every reboot

  In addition to a full scan with your antivirus installed utility, download and run a scan with Malwarebytes Anti-Malware free [MBAM].  It is much more difficult for malware to hide its presence of two scanners different antimalware.  MBAM can exist alongside other anti-malware utilities, so it won't be a problem.

  Of course, it could be an anomaly in the system instead, but it's not that I've seen reported in this forum before.  Windows has no integrated procedure that changes the setting of the UAC, so it is difficult to envisage any procedure through to cause this symptom.

  Please specify the operating system you are using and use blue change control under your question of re - categorize it as a matter of Windows if necessary 10.

  Good luck

  Denis

• WWhy does User Account Control como upwhen I click on the logo of Firefox?

  I have Windows 7. For the last 2 weeks, when I go to Firefox on my user account control window appears and asks "do allow you the following program to make changes to this computer?

  I say Yes. This happens whenever I click on the Firefox logo. How can I avoid what ODM?

  Hi zamler, sorry for the response not related.

  I don't know what are the causes that...

  If you right-click on the icon > properties > Compatibility tab, can you ensure that "run this program as an administrator" is unchecked?

• Why User Account Control allow me on IE without permission after resetting IE

  A few days ago I couldn't get on the Internet because IE would not work and internet connection was ok so out of desperation I did a reset of the EI. It still does not work then a member of the family came and got it works, but now I get the popup to permission to the user account control every time that I log on the desktop by clicking the shortcut of IE.  I went into the folder security and disabled UAC and now I only get this popup whenever I click on the desktop IE. This never used popup lights up when clicking on the shortcut of IE, so something must have happened when I did the reset Internet Explorer.  Does anyone know how to keep control of user account for all but IE?

  I have a feeling that I accidentally changed a setting on IE and probably should not have an IE reset.but now the problem is that I like to keep the popup of User Account Control permission for everyone, but the IE shortcut on my desktop.

  Furthermore, family member right clicking on the desktop for IE shortcut and did something with run as administrator to get IE working again.

  My nephew looked at the problem that I had some time ago, but I told him to forget it because he really didn't have time to work on it. I just kept off UAC all these months and had no problems I do not download anything that I'm not sure. However, a few days ago I went back to this problem. I tried checking with the Compatibility tab, and as said above "Run as Administrator" was unchecked. This time I went to the contextual on properties of Internet Explorer and click on Advanced tab. Then I unchecked the run as Administrator box and I went back and UAC enabled and everything works well. Without UAC popups more!  I also did this for the exchange of information in the start menu and on the Quick Launch bar. For some reason any one on the keyboard had worked this time (he had not earlier) without a popup UAC even before I made the changes.  This is exactly what made me do some exploring more to see if I could get the other IE shortcuts to work.

  I believe that another Member of my family who had helped me to get IE to work when I had problems to make on the internet even after a reset IE active the option "Run as Administrator". He has not been bothered by the popup and said if I was annoyed by it just turn off like he said I had a very good program antivirus (Norton) installed on my computer and it always warns you if a program you want to install is safe or not safe.

  Hope this might help someone else who may have this problem.

  Holly

• Unwantet user account control Popup

  A program that I use on a regular basis does not start until a window has popped up and I give permission.  The message is that an unidentified program wants to access.  How can I get my system to recognize this software and remove this message?

  Hi hlsmlane,

  Welcome to the Windows Vista Forums answers.
   
  Some applications, such as applications to be internal or non-Microsoft products, require the full administrator access token to perform at least some of their functions or tasks, but have not been identified as applications administrator by the developer or Publisher. In this case, you can use the following procedure to mark an application so that the operating system always requires the use of a full administrator access token.
   
  Important: you cannot mark an application to bypass the message user account control.
   
  To perform the following procedure, you must be able to connect with or provide the credentials of a member of the local Administrators group.
   
  To mark an application to always require a full administrator access token
   
  1 right click on an application that is likely to require a full administrator access token, but has not been marked as such.
   
  2 click Properties and then click the Compatibility tab.

  3. under privilege level, select run this program as an administrator check box, and then click OK.
   
  Note: If the run this program as an administrator option is unavailable, it means that the application is blocked from always running with administrator credentials, the application does not require any administrator credentials to run, or you are not connected to the computer as an administrator.
   
  You can also check out the links below:
    How to mark an application to always require a full administrator (User Account Control) access token?

  http://windowshelp.Microsoft.com/Windows/en-us/help/12ad62e6-f51b-4EAA-8352-8513589c59e71033.mspx

  How to enable an application to run once with a full administrator access token in user account control?

  http://windowshelp.Microsoft.com/Windows/en-us/help/1c3e6b36-b65a-42ED-8BB0-0868ef13c0751033.mspx

  I hope this helps.

  Concerning
  Rehman - Microsoft Support

• User account control problems

  MY ADMINISTRATOR ACCOUNT HAS BEEN DELETED SOMEHOW. WHEN ANOTHER ACCOUNT IS OPEN AND WE ARE TRYING TO REMOVE A PROGRAM OR START SYSTEM RESTORE THE USER ACCOUNT CONTROL BOX NOW COMES UP TO ASK PERMISSION TO CONTINUE. WE CANNOT ENTER ANY PASSWORD. USER ACCOUNT CONTROL IS TURN OFF MY COMPUTER. HELP PLEASE!

  The first thing to try is go to Safe Mode to see if the disabled built-in Administrator account normally is now available. Enter Safe Mode by repeatedly pressing the F8 key as the computer starts. This will put you in the right menu. Use your arrow key to select Safe mode, and then press the Enter key. If you see an icon for the administrator on the Welcome screen, log into this account and make your changes. Follow the recommendations for setting up the accounts of user below.

  If you do not see an icon for the administrator mode without failure, post back for further instructions.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• Cannot download Flash Player version 10.1 because user account control blocks.

  Whenever I have try and install the new version of Flash Player 10.1 from adobe, I get a new box that opens by saying my 'user account control' has blocked? Any ideas? Thank you drummer

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  The link below is a very reliable source.
  Take a look at the responses to this thread.
  http://www.Vistax64.com/Vista-security/181833-subject-Vista-user-account-conrol-unblock-Adobe-flashplayer.html

  I have no experience on this topic. I can only offer you a link to find possible solutions.

  t-4-2

• Administrative user account controls

  When I try to delete or to rename my files in Windows Vista, I always get the statement that I don't have permission and I'm the only one on my laptop and an administrator.  How can I get rid of the boxes that tell me that I'm not allowed to delete or rename my files?

  Hello

  You can also enable the UAC SILENCER or STOP if it lower your security level.

  THIS UTILITY MAKES IT EASY TO

  http://www.tweak-UAC.com/
  Tweak UAC utility - easily put UAC into Silent Mode or POWER

  -----------------

  How to turn User Account Control (UAC) On or Off with Vista - displays all related links
  http://www.Vistax64.com/tutorials/48893-user-account-control-UAC.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Excel and user account control

  I have a shortcut to an Excel spreadsheet saved on my desktop.  I use is ever day.  Everytime I open it I have to click Yes on the popup screen that asks do you want to allow the following program to make changes to this computer.  How can I keep my UAC control level but allow Excel spent?

  UAC should not contest an Excel file, if the system is working properly.  I have my UAC set to top & I use Excel files without any problem.

  You will probably get better help in MS Office Excel forum but do these controls first:

  1 Excel open other files correctly?

  2. If you open Excel, and then use to open the file, it opens correctly?

  3 don't Excel file containing the macros auto_open affecting the system that is running this macro the thing that is called into question?  [this idea may be rejected if check 2 books - and I doubt that it in any case, you have mentioned]

  4 check the properties of this shortcut.  Right-click on it, select Properties, click the Advanced button.  You have the checkbox for run as administrator?  If so just, clear the check box, or just create a new shortcut to the file in Excel.

  I guess that check 4 will solve your problem, but if not, see if the users Office Forum can help you further.

  Additional - Keep an eye on this other thread as another user is also having problems with an Excel file ongoing disputed User Account Control, a recommended security level prevents starting applications

• In Windows 7 user account control

  Hello

  I have a PC with Windows 7. I downloaded Magellan Content Manager to manage my new GPS Magellan, but whenever I double-click on the program to execute, User Account Control stands up and says: 'do you want to allow the following program... '. ». Is it possible to get the account control user to recognize that I have confidence in the program? I have a number of programs that I downloaded from the Internet and it is not disputed any of them except this one. Any suggestions?

  First of all, is your account of usual user "Administrator" or "Standard user"?  Go to control panel > user accounts for know.

  Even if your account is an account 'Administrator', Windows 7, local administrator accounts run as a standard user except when specifically authorized to do otherwise.  In other words, if you have not made any changes to the system setting, when you try to do something that requires administrator privileges, you will get a UAC prompt.  The difference is that if already logged in as a local administrator, the prompt will ask just for your authorization, like this:

  

  However, if you are logged as long as standard user, you will be presented with a list of accounts local administrator on the computer and an application to enter a password for one of them, like this:

  

  Because you get the UAC prompt when you try to Start the program, the question is not what the program could eventually do after it is started (for example, try to save files in system folders), but that the program be appointed - by the code in the program itself - as an "administrator task", i.e., a task that could potentially accomplish administratove missions.  Most applications that are referred to thus show a security shield on the shortcut for the task icon...  I guess the shortcut of the content for your Magellan Manager has a shield, like this:

  

  I have not tried the following, myself, but this tutorial is intended to be a way to perform a task that normally should be 'high' without causing the UAC prompt to appear, but only if logged in as a local administrator, not a standard user--> http://www.sevenforums.com/tutorials/11949-elevated-program-shortcut-without-uac-prompt-create.html