User accounts and Microsoft updates

Similar Questions

• Corruption, massive in almost all of the network services user account and firewall Windows

  Win 7 Pro SP 1. An account with administrator privileges. Domestic wireless access to a router; D-link devices. System was working fine until about seven 2 (and I pointed out some Windows updates installed September 1, but don't think it's relevant). Computer users allege no unusual behavior on their part Analyses of viruses from Windows Defender and Avast free were clear. Restoring from a previous restore point (two different ones) has not solved the problem - the restore points were date known system OK. Corruption has been maintained despite the restorations (worked and failed).

  A complaint that has lost network access. On the survey, found that all these symptoms mentioned below, and no doubt other symptoms exist that I am not aware of. The solution was to create a new user account, and which restored massive configuration problems.

  Symptoms:

  1 Windows Firewall could not turn on. Yes, I looked at the KBs regarding this issue (basic dependencies does not and so on) and tried individual hotfixes from the KB, without success.

  2. in the network sharing Center, there was no display of the usual icons at the top of this window. Those who show the personal computer connected to the router connected to the internet. Error message displayed re no dependence of base.

  3. it is possible to send signals between the USB wireless device on the computer and the wireless router. In the task area, the Windows message was 'limited connectivity', something like that. It was possible to connect and disconnect using this facility. But no internet access, notes.

  4. the resolution of the problems would not be executed. The message was that political diagnostics are not running. All attempts to start this service (with its two assistance services) has failed. Tried the individual patches of the relevant KB (wearing mostly on change permissions in the registry at some points), which failed.

  5. in addition, the Dhcp client service would not be executed. Once again, among the KBs tried the proposed fix on the permissions change, which failed. (Omitted in the sense that I could not always start the service; editing the registry was fine).

  5. firewall KB contained a file "beats" that you can create and run, I did, and another had similar commands (start and stop some services) that could be run in a command window. Both failed on some services - especially Mspsvc (Microsoft protection Service) - Although the success was shown to other services.

  6. when I created a new user profile, I re-entered the registry permissions in some of these places just to see what was different. In the damaged user profile, what was missing, it was the standard system of services (about 3 or 4 of them; things like the name of Dhcp). What showed was the News user account (for the specific user account; administrator; and two more points).

  Telling me that something has released a complete subsystem or three. Never seen this behaviour before.

  Would be nice to have an idea where to look for a fix / restore procedure.

  DonM

  Hello

  Thank you for providing us with brief information on the specific issue that you are facing the computer.

  I would like to know, have you been able to access the network on the new user profile?

  As you have tried several steps including the change of permission for the registry value and run the batch file, I would ask to perform Scan SFC.

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  For more information on how to scan SFC, please see the Microsoft Support Article below.

  Use the System File Checker tool to repair missing or corrupted system files

  Let us know the results of the SFC Scan, so that we can help you further.

• Management of user accounts and Parental control in Windows 8

  Hello

  I'll post a thread on how to manage the user accounts and Parental control in Windows 8.

  A user account allows you to connect to Windows 8. By default, your computer already has a user account that you have been
  needed to create when you configure Windows 8. If you want to share your computer, you can create a separate for each Member of your household or office user account. You can also choose to associate any user account with a Microsoft account. Signature with a Microsoft account will bring all your SkyDrive files, contacts and more in the start screen. You can even connect to another computer that has Windows 8 and all your important files will be there.

  Here is a video on how to manage the user accounts and Parental control in Windows 8.

  Also, here is a document showing you how to manager Our user on Windows 8.

  If you have any questions let me know.

  THX

  I hope it's useful.

  THX

• Forgotten password for XP user account and did not password reset disk, how can I get in

  Forgotten password for XP user account and did not password reset disk, how can I get in

  Michael, Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky... http://social.answers.Microsoft.com/forums/en-us/w7security/thread/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• By mistake I disabled all user accounts and cannot connect to my dell latitude d610 laptop computer. Tried going into the bios and turning off everything, what does not work!

  By mistake I disabled all my user accounts and cannot connect to my laptop, the Dell Latitude d610. I tried to restart in all modes as well as rotating directors passwords and disable in the bios. Nothing works!

  Hi kathleenvickers,

  1. How you have disabled all the user accounts on the computer?
  2. What do you find in the login screen when you restart the computer?

  See the articles below and check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• I created a new user account and now I can't find my documents, photos and music

  I created a new user account and made computer administrater and now all my documents, music, photos have gone what to do to get back to my old account

  Hello

  1. did you remove the old account?

  If you have not deleted the old user account, and then follow the steps in this link to copy files to the new user account and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Check if that helps.

• When you try to use the repair your computer from the advanced boot option option, it only shows a different user account and my username and password does not work

  Original title: when you try to use the repair your computer from the advanced boot option option

  When you try to use the repair your computer from the menu option options advanced startup, when it comes to the screen to select the user account it shows only a "another" user account and my username and password does not work, and the 'OTHER' this account is not on my list of user accounts... what should I do?

  Hi kennympeek,

  1. why you try to do the Startup Repair?

  You can try to perform the commissioning of repair using the audit and the disk Installation of Windows Vista.

  For estelle information links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope this information is useful.

• How to remove a user account from microsoft since the local account main administrator?

  Basically started nitialy I entered my email incorrectly. Then I created a new profile with the correct e-mail and he agreed to become a microsoft account. Then I deleted the old start microsoft account via the browser, as it was useless, because I could not verify that the email was incorrect, and I could not change this without checking the account... Bit of an odd he implemented.

  anyway. Now my main Administrator profile is not a profile of microsoft and electronic mail microsoft profile has no administrative privileges. I also want that one account as theres not point have two if they are identical. I tried to go to the users and manage the account but can't see anywhere. Please help me through this mess

  Hello

  I understand that you are unable to remove a user account that is not listed in the control panel under users, manage account.

  Follow these methods and check if that helps.

  Method 1:
  Please refer to these steps on how to remove a PC user account.

  To remove an account from your PC

  You must be logged in as an administrator to perform these steps.

  a. drag from the right edge of the screen, tap settings, and then tap Change PC settings.
  Press or click accounts, and then press or click on other accounts.

  b. press or click the account that you want to remove, and then press or click delete.

  c. press or click delete the account and data. (Please back up all important data before you delete the user account).

  d. it may take a few minutes, if the account has a lot of associated data.

  Method 2:
  If you are not able to find the user account, and then follow these steps.
  a. press Windows + R and type netplwiz, and then press ENTER.

  b. in user accounts, select the user tab.

  c. now, click the account you want to remove and click Remove.

  Check if it helps. If the problem persists, we would be happy to help you.

• I tried to download xpsp3 it's the fifth day to try, I have windows update and microsoft update open what I do

  I tried to download xpsp3 it's the fifth day to try, I have windows update and microsoft update open what I do

  I tried to download xpsp3 it's the fifth day to try, I have windows update and microsoft update open what I do

  Download and install it manually. Click HERE download Service Pack 3. Save the file to your desktop. Double-click the file and follow the prompts to install. Make sure that you disable security software like antivirus scanners or spyware before you run the file sp3.

• try to find out how Windows Vista Enterprise SP1 running on a tablet of 2730p HP will react to several user accounts and its handwriting recognition software will react.

  original title: handwriting recognition several users

  I'll try to find out how Windows Vista Enterprise SP1 running on a tablet of 2730p HP will react to several user accounts and its handwriting recognition software will react.  It keeps all users writing separated or are they all grouped together as one.

  If you could provide liturature on this I would appreciate it too.

  Thank you!

  Hi Zabian,

  Since you are in a corporate environment, your question is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Vista Security Forum

• Something going wrong on a server that contains information about your user account and the mailbox can not be found.

  Cannot open the e-mail.  I can connect on the MSN home page and when I right-click the outlook icon it shows the e-mail Inbox, but cannot access e-mail.  I just get this error

  "Something going wrong on a server that contains information about your user account and the mailbox is not found."

  This error is on the MS and they are aware and working on a fix.  Have you tried connecting mail.live.com directly using your e-mail address and the password?

  For later use, you would get more (and larger) response if you posted this in the Outlook.com (e-mail) section, where are the experts.

• Virtual Center Version 2.5.0 Build 119598 - add user / Select user GUI - not finding the users accounts and groups in Microsoft AD

  All,

  Has anyone seen the following symptoms?

  (1) when a user or group account does not appear in the 'users and groups' dialogue box 'Select users' research will result in a "select users or groups" pop indicating "no user or group not found as the search result. Before beginning your search, in the dialog box "Select users", the correct domain name appeared in the "domain:" drop-down list.

  (2) not possible to account or group of usernames containing spaces. She will accept the format of the name of groups 'Pre-windows 2000' of objects. The account names and groups ' select users ' GUI will be find the account or group when you enter the explicit & lt; domain name & gt; ------& lt; Account name & gt; in the text box 'Users' or & lt; domain name & gt; ------& lt; Group name & gt;.

  Is there a known issue with user accounts or to find when they do not appear in the "users and groups" in the dialog box "select users".

  Kind regards

  Steve

  Sorry, wrong forum, this is Server 2.0.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Change the type of user account is not updated

  I changed my account type standard user principal and account invited to administrative yesterday. Now, I want to change it back but is not allow me to change my primary administrative standard. I can click on it, but it is not updated. What should I do to not having guest account my administrative account?

  Hello

  You receive an error message or code everything by trying to change the type of account?

  Note: Guest account cannot be defined as administrative account. There the option only to turn on or off.

  Reference: Change the type of user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-a-users-account-type

  If there is an another account on your computer, and then log on to the administrative account and then try to change the account type.

  Method 1: Activate the default Administrator account, and then try to change the type of account and check if it helps:

  Enable and disable the built-in Administrator account

  http://TechNet.Microsoft.com/en-us/library/dd744293 (WS.10) .aspx

  Method 2: If the above mentioned method does not work then try the system restore:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

• I cannot create new user accounts and have tried all the steps listed in all of the current discussions, does not

  Good people you've heard of this one before:

  I can connect to my basic admin account, but not others.  I tried to create new user accounts after you delete the old user accounts but system would not apparently carry out process.  I get the following warning:

  Service user profile Service failed to connect
  User profile cannot be loaded.

  I tried all of the recommended patches (see list below)

  1 ran all appropriate steps as stated in the article: http://support.microsoft.com/kb/947215 - no joy
  There is not other profiles listed in the register except the administrator account on the basis and since I couldn't connect successfully to a user apparently newly created accounts, the profile has not completed the process of generation.

  2. I have not ran the SFC system - no joy.  He replied with the following: Windows Resource Protection did not find any breach of integrity.

  Then... of other big ideas?

  Oh
  Running Win 7 with all latest updates (login problem is not a new problem according to my children - I just got back from the extended learning this persistent problem)
  I am on an Intel machine running dual quad core which is only 6 months old.
  I run MS Office 2010

  Hello

  I suggest you to consult the steps mentioned in the link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/i-cannot-create-a-new-user-account-Windows-7-the/dee340f7-5da9-402b-9e99-293dbd249a53

  Hope this information is useful.

• Address bar works on a user account and not on the other

  Hello

  I searched on through so many forums to find an answer to my problem - it is perhaps quite unique.

  A year ago, stopped my firefox address bar AutoComplete works not at all. I have the latest version and I tried all the stuff around dumping cache etc. Anyway, I got a new Mac yesterday and I opened Firefox and everything worked as it should - great.

  However, I moved all my files/settings/applications etc in front of my ole mac via migration assistant and now firefox is not working properly on this user account. So, I have two user accounts on the same mac, both running the same software applications. The user account with all the old files etc is that I want to continue to use, but Firefox will not properly work on this subject.

  I uninstalled and reinstalled, updated, deleted version cache... all I can think.

  I'm sick of Chrome crashing on me.

  Can anyone help?

  This may be a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox