User accounts from sandbox

Similar Questions

• How to remove a user account from my computer

  When setting up my computer, I added several user accounts with the same name.  How to remove a user account from my computer.

  Hi RuthGeardino,

  Thanks for posting in the Microsoft Community.

  As you try to delete the user accounts, it would be useful if you can answer this question to help you further.

  Windows operating system you are using?

  You must be logged in using an administrator account to delete other accounts.

  To remove an account user-Windows XP

  Delete a Windows 7 user account

  Note: This article also applies to Windows Vista.

  If you need further assistance, please answer and we will be happy to help you.

• Need to access the user accounts from previous installations

  I am running Windows XP Pro, and I have installed new software.

  When I have it ran for the first time my PC crashed. Now, whenever I try to load it up it just keeps restarting before you get to the login screen. Safe mode does not help you, or doesn't last known good configuration. There is no recovery point recorded.

  I searched online for help and tried to repair the Windows version by inserting the CD and choose 'Repair', but there is no repair option. He wants me to install a new version of Windows on the partition, which, from what I understand, going to wipe my user accounts. It would be a big problem, as I have a lot of data out there that is very important for me who is not saved. My fault, still backward, etc. No not after the sympathy, just stating the facts!

  I also have Windows XP 64 is installed on a separate partition, and I loaded this up to see if I can see the user account I want to access. I can. But I can't access it because it is password protected, and it just comes up saying 'access denied '.

  So, how do I gain access to this user account? Doing anything to the working version of XP64, either by repairing the other partition inactive?

  All welcome, no matter how much of a long shot it is advice. I'm getting desperate!

  Thanks in advance.

  Hi Malkeleah,

  I had real problems trying to get Knoppix to work. I downloaded on my laptop, then had to put on a USB key to burn on the PC with Win 64 on (portable DVD player is read-only), but I couldn't do burn. I kept of burning errors using the built-in burner after first unpacking the ISO on the laptop (no support ISO native in Windows XP), or when I tried to install on win 64 the system burning software I got error messages saying: the software wouldn't run as soon as I clicked to install it. And Yes, I checked that I was using the software compatible 64-bit! No idea what it was, the 64-bit version has never really been used, not even well why it is installed.

  In any case, after that much hitting my head on the office followed a couple of pints in pubs, I managed to find another way around this problem, which was to take ownership of the files according to the instructions on the Microsoft Web site:

  http://support.Microsoft.com/default.aspx/KB/308421

  It worked wonderfully for me, and I have been able to support Windows 64-bit, re - install XP 'normal' and then appropriated again under that. 2 files come with errors and would not sell the property, but they were not even remotely important if everything is good. I got literally thousands of other files that flies over without any problems.

  In any case, thank you for taking the time to help me, I'm sure that your method would have worked if I had been able to create a CD (I would have posted off the coast for one if everything else has failed because they will send one in the world for any $2 IIRC), but for someone else who did a search and found my ad the above that I mention is worth a go as an alternative method.

  And no, I didn't have the encrypted files. Just locked the account of some simple password protection.

  Thanks again,

  Chris.

• You want to delete the user account from the computer and turn the computer on a workgrout or a homegroup.

  Original title: My Windows 7 laptop is plugged in and not on a network. My lack of understanding of the work and networking groups made me make a mess in the implementation

  I implemented 'users' as I could and now I find that in large part is loaded on my computer and I didn't need to have to deal with two identities to myself.  Can I fix or would it not be better to reinstall Windows a user, a set of files on all and the guest account will be switched off.  In addition, even though my computer says that it is a working group, the only internet connection I have is the LAN.  Can someone put me directly.

  Thanks in advance

  Hi Daniel,.

  Until we provide troubleshooting steps, we would like to know as a result of information from you.

  Do you have problems when you access to your user accounts?

  It depends on your choice what parameters of files you want to keep to a particular account. As you mentioned that you have two accounts and you want to keep once the user account, I suggest you follow the steps in the link given below to delete a user account.

  Delete a user account

  http://Windows.Microsoft.com/en-in/Windows7/delete-a-user-account

  If you want you can transfer files and setting up one account to another, you can follow the steps in the link below.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-in/Windows7/fix-a-corrupted-user-profile

  You can see the steps in the link below to add your computer to a home group or a working group.

  Join or create a workgroup

  http://Windows.Microsoft.com/en-in/Windows7/join-or-create-a-workgroup

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-in/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win8tab1&V2H=win7tab1

  Feel free to write us if you are still experiencing a problem. We will be happy to help you.

• How to remove a user account from microsoft since the local account main administrator?

  Basically started nitialy I entered my email incorrectly. Then I created a new profile with the correct e-mail and he agreed to become a microsoft account. Then I deleted the old start microsoft account via the browser, as it was useless, because I could not verify that the email was incorrect, and I could not change this without checking the account... Bit of an odd he implemented.

  anyway. Now my main Administrator profile is not a profile of microsoft and electronic mail microsoft profile has no administrative privileges. I also want that one account as theres not point have two if they are identical. I tried to go to the users and manage the account but can't see anywhere. Please help me through this mess

  Hello

  I understand that you are unable to remove a user account that is not listed in the control panel under users, manage account.

  Follow these methods and check if that helps.

  Method 1:
  Please refer to these steps on how to remove a PC user account.

  To remove an account from your PC

  You must be logged in as an administrator to perform these steps.

  a. drag from the right edge of the screen, tap settings, and then tap Change PC settings.
  Press or click accounts, and then press or click on other accounts.

  b. press or click the account that you want to remove, and then press or click delete.

  c. press or click delete the account and data. (Please back up all important data before you delete the user account).

  d. it may take a few minutes, if the account has a lot of associated data.

  Method 2:
  If you are not able to find the user account, and then follow these steps.
  a. press Windows + R and type netplwiz, and then press ENTER.

  b. in user accounts, select the user tab.

  c. now, click the account you want to remove and click Remove.

  Check if it helps. If the problem persists, we would be happy to help you.

• Delete how could put cached user account from the Nexus 9 K program?

  We had a problem that the GANYMEDE user could login to N9K via GANYMEDE ID only once, after that all connection attempts are failed.

  The log shows:

  2016 jan 29 01:51:39 % of name of HOST AUTHPRIV-6-SYSTEM_MSG: START: ssh pid = 13840 = from: ffff:10.25.158.105 - ACD-xinetd [7165]
  2016 jan 29 01:51:39 % of name of HOST AUTH-6-SYSTEM_MSG: could not load host key: / isan/etc/ssh_host_dsa_key - sshd [13840]
  2016 jan 29 01:51:57 % of name of HOST DAEMON-3-SYSTEM_MSG: cannot create the temporary user 1473165. Error 0x404a000a usermod: group '1473165' is not (100663296) - sshd [13840]
  2016 jan 29 01:51:57 % of name of HOST AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication failed for user 10.25.158.105 1473165 - sshd [13840]
  2016 jan 29 01:51:57 % of name of HOST AUTHPRIV-5-SYSTEM_MSG: failed to connect to the 1473165 user - sshd [13840]
  2016 jan 29 01:51:57 % of name of HOST DAEMON-6-SYSTEM_MSG: doesn't have a password for 10.25.158.105 1473165 54733 ssh2 port - sshd [13840]

  Any user can only connect once, we confirmed the password are correct.

  But when "view us user accounts, we found the account have been cached which suppose to do this problem.

  user: 1473165
  roles: vdc-operator
  account created through the REMOTE authentication
  Credentials such as ssh server key will be cached only temporarily for this user account
  Local login is not possible

  Is there anyone know how to remove these cached user accounts?  And how do I configure self-suppression of users hide once disconnection?

  Most likely, you hit CSCux43153.

  -Raj

• Which is better to have several user accounts from window for the same person, so having much Firefoxes or have much Firefoxes under a Windows account user?

  Right now I have about 6 window user accounts (just for me on a single computer) because I didn't know I could put more Firefox then one per account. I leave the tabs upward when I close Firefox, because if I just bookmarks I won't finish my work I was doing with these sites. Now that I know how to put multiple Firefoxes under a user account. That would make my computer fast or not, it matter if I put all my Firefoxes on a window user account or have 6 windows user accounts, each with their own Firefox?
  -Thank you

  It is more work to move to a different Windows account and then open another instance of Firefox with a different profile.
  If you only use other windows accounts for the use of Firefox like this and not for any other purpose, then there is nothing against the passage to a single Windows account to make it easier to manage such things as the backup of your personal data or copy data between the other profiles.

  So, it's up to you if you want to switch to a single Windows account.

  See also:

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • https://developer.Mozilla.org/Mozilla/Multiple_Firefox_Profiles

• Missing user account from the logon screen icons

  I tried and tried to understand it, but not impossible.

  My 5 year old son and his friend were playing a game on the computer for a little while and when I tried to change username on my account (Administrator) the only icons that have been confirmed on the login screen of my son and an icon of the Virgin 'another user' that requires a user name and password.

  Previously, we had four icons of the user account on the opening screen of session with each of our own photos. Our accounts are always listed in the computer but I can't understand how to add icons to the logon screen.

  I can still get into the computer through my son's account.

  I tried and tried to understand it, but not impossible.

  My 5 year old son and his friend were playing a game on the computer for a little while and when I tried to change username on my account (Administrator) the only icons that have been confirmed on the login screen of my son and an icon of the Virgin 'another user' that requires a user name and password.

  Previously, we had four icons of the user account on the opening screen of session with each of our own photos. Our accounts are always listed in the computer but I can't understand how to add icons to the logon screen.

  I can still get into the computer through my son's account.

  Hé pb821

  try a restore system before the problem

  Read the guide on how to do it in the link below

  http://www.windowsvistauserguide.com/system_restore.htm

  do the restore of the system in SafeMode if necessary

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Walter, the time zone traveller

• How to permanently remove a user account from Vista home premium at all times

  I have tried to delete a few old my laptop turned off user accounts and cannot do so for a reason any. I can prevent them to appear on the login screen, but they still appear in the "USERS" folder ??? Someone at - it a

  the idea that actually works?

  Hello

  Be sure to back up all files under this user account before removing.

  How to delete an account in Vista
  http://www.Vistax64.com/tutorials/93026-user-account-delete.html

  Vista: How to remove a user account
  http://www.tech-recipes.com/Rx/2054/vista_how_to_delete_user_account/

  Manage user accounts - scroll to the bottom to create a new user account
  http://www.vista4beginners.com/manage-user-accounts

  I hope this helps.

• How to remove the user account from the connection Start Page (therefore restart goes directly to the desktop without the need for any clickthru)?

  On my Windows 7 Home Premium SP1 64-bit system, all I had to do was to remove all the accounts (other than 'administrator') in addition to my login information main user account and remove the password of the Admin account and I use a main user account, and then whenever I reboot, reboot goes all the way to the Windows desktop (i.e. through it does not stop with a cover page showing the user account).

  -It does not seem that this approach works for my Vista SP2 Business Edition 32 bit.  In fact - I get TWO accounts of user with the exact name even appear (my account "DougL12"), as well as the "Administrator" account  None of these accounts have passwords (I can just click on one of them, which brings up a screen to enter a password, then click again without entering any PW, and then I get thru on my desk).

  When I go to 'User accounts' control Panal and select 'Manage another account', windows displays a screen showing three accounts:

  (1) "Guest" (power off);

  (2) "DougL12" (hey I am running, whose B-T-W has privileges admin; also do not have a password); and

  (3) 'administrator' (which, if I choose only, is not an option 'disable', although it has not one)

  (password).

  NOTE: page does not display "" versions of the user account "DougL12", although the login screen that is telling.

  so:

  (1) what do I do to eliminate the appearance of user accounts / Login Screen (i.e., default to my main user

  Account, "DougL12" and should not click)?

  (2) any thoughts as to why the system could be displaying two Occurrences of the user account Login "DougL12" on the

  login screen?

  Hello
   
  I would like to suggst you follow link which can help you solve your problem below:
  Turn on automatic logon
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-on-automatic-logon
   

  See also:

  Enable and disable the built-in Administrator account
  http://TechNet.Microsoft.com/en-us/library/cc766343 (WS.10) .aspx

• Troubleshooting slow running under a user account from Win7 machine and normally with the other user accounts on same (or other) third-party app

  Hoping that this is not too off-topic, but I'm really running out of ideas...

  I have this trading program full license (TMPGEnc MPEG Smart Renderer 4.2) who has worked on my Win7/64 for several months, and in recent weeks, has become excruciatingly slow for every user interaction (but not for real computing), making it essentially unusable (1'30 to launch vs 3 normally, 30 "seconds waiting to launch a 'new project' vs.)<1s normally,="">

  When 'pending' launch application or respond to a command, 12% of the full CPU (8 logical cores on CPU Core i7 third Gen) is used by a single process: the offending application (look at the Task Manager, 1 logical core is used to +/-80%, a second for about 15% of this process). All other processes are still at 0% CPU usage.

  Of course, I tried & tested many things including full-/ re-installation of the application with a careful cleaning etc., corresponding registry entries software disabling AV (Avira free), .net Framework Repair Tool, etc... no change! The disc has been checked and is OK.

  Some interesting tips:

  This app worked fine for several months before the problem started abruptly a few weeks; I tried to uninstall .net Framework 4.5 updates to a date prior to the date of beginning of apparent problem, does not; I came back to an earlier version of the offending software: no change.

  But the most interesting observation is that the app works well at the launch of any other user account on the same machine Win7/64 (whether with the normal credentials or admin), so for me that means there should be no conflict of software on the computer, only something in my profile of the main user who causes the app behave so slowly.

  At this point, the Helpdesk of the seller looks distraught - too.

  Suggestions for troubleshooting?

  BTW: I consider that this computer is well managed, and no rogue or untrusted app sleeps there. my main profile is fairly heavily customized for my work, so I want to avoid workaround last resort would be to create a new user account as work environment main (besides the fact that I hate not to find the root cause of the problem)

  Hello

  Given that this problem is specific to the user's profile. I suspect that some programs that are installed or some settings in the profile translates into this problem. You can fix a corrupted user profile by following the steps in this article:

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  I hope this helps.

• Disable the user account from DIO after 90 days of inactivity - IOM

  Hello
  
  I have a requirement where I have to disable a user account, if it has not signed the last 90 days in our environment (OID). Users are authenticated via OAM when they connect. Anyone have an idea what attribute in what class of object OID should be checked for the last connection attempt made by the user and what is the data type of the same thing? It's a date that I can compare after completing an initial context of LDAP OID and pointing to each single user?
  
  Really need a solution for this. Please answer.
  
  Thank you very much
  -oidm.

  See the description of the schema to the:

  http://download.Oracle.com/docs/CD/B28196_01/idmanage.1014/b25348/schema.htm#CFHCGFCC

  Create you a code that is running on a daily basis, check for the last date of connection and, if it is more than 90 days, you disable the user OID.

• I don't know how to enter the user account from the Hp laptop?

  I bought a laptop from a garage sale.  It turns on but it is a user with a password on this matter.  I don't know how to get from there. The people moved so no way of getting information about the password.

  Original title: Hp laptop

  Hello

  When you buy a used machine, the advice is to reinstall the operating system, you don't know what this machine was used for and/or malware may be present.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Cannot delete files from user accounts.

  Original title: wifes username.

  When we got our laptop I seized my wife as the user's name. Now that she uses our office I'm the only person who uses the laptop, I tried everything to remove his name from the computer. However, his name always comes as a user, his name, and then click documents. Is it possible to delete his name all together. Thank you.

  Hello

  How have you tried to delete the user account from the computer?

  When the user account is deleted, make sure that you select delete files.

  a. open user accounts by clicking the Start button > Control Panel > accounts user and family safety > user accounts > manage another account.
  Note: If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. click the account you want to delete and then click on delete account.
  c. decide if you want to keep or delete the files created under the account by clicking on the file to keep, or delete files.
  d. click on delete account.

  Reference: user accounts: frequently asked questions

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Delteing user account problems

  I am trying to remove a user account from my main administrative account and will not delete. After clicking on the button Delete, it becomes inadmissible and I must continue to send error reports. Have I been hacked and not able to do anything whatsoever as an administrator? I made a new user account and it deleted to see if I could, but still I can't delete the user account I want to delete. I'm not trying to delete my user account, another account via Control Panel and user accounts.

  I don't know exactly what your problem is but here are some things that you might try...

  (1) this could be caused by a problem of file system corruption.  Try to run a "chkdsk" on your hard drive, the two verification options.  It is a step of good maintenance that must be done when even occasionally.  WARNING: on a system drive, it will be performed at the next startup, runs before Windows fully boots, cannot be interrupted and can take a few hours to complete.  (Do it when you won't need computer for awhile)

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  (2) if it does not help, try to delete the user profile before you delete the user:
  Right click on "My Computer"-> properties-> advanced (tab)-> click on 'Settings' in the section "user profile".
  When it comes to the top (may take some time), select the user profile you want to remove, and then click the button 'delete '.  (You can check the 'Size' column because much more disk space will need to be deleted and could take a while).  After that, try to remove the user from the control panel.

  (3) sometimes, I find that the use of the work of the prompt command line better than doing it using the GUI...
  Open a command prompt window: (start-> Run-> "cmd")
  Enter the following command in the command prompt window:
  NET user smith/delete
  Where, of course, you replace 'smith' with the user you want to remove.

  (4) you can also try a "System Restore" at an earlier date, but if the problem is in the register, and has been around for a while, this might not be a great help.  After restoring, try to delete the new user.

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  HTH,
  JW