Unable to connect to the second Pc (WinXP) after lapop upgraded to Windows 7

Similar Questions

• Unable to connect to the network wireless company after Win7 upgrade

  My network is not broadcasting the SSID, so on Vista, I used to set up the connection manually.  However, with Win7 64, I get an error "an unexpected error has occurred."

  Reference Dell xpsM1330

  Intel WiFi Link 4965AGN

  Any help would be appreciated.

  OK, let's see if we can keep it active and come up with a solution...

  Got a POC MS to give me some info that may help...

  I have known many above have, while I can connect to wireless networks, including my home wpa2, plus any time, I tried to do a my wpa2-Enterprise don't, go and had errors in the event log. also the similar failures whenever I would try to manually create any wireless profile using wpa-enterprise or wpa2-enterprise.

  Note also mine was a machine that got USMT data migrated, and I have a feeling that it was responsible for migrating the keys below...

  So here was the final solution, and maybe you guys can check if it is the only necessary thing that I had tried various other things without result, but it was the 'last' modification I did that things work...

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\RasMan\PPP\EAP

  There are a number of subkeys with different numeric values...

  while I can not tell you exactly what to search for, in my case I noticed there was a key pointing to what I expected, a related key ras in the ED. of windows\system32 however, I had also three other keys pointing to the files associated with Symantec, which I did not on my machine newly built.

  So I exported keys of a newly-built machine that did symantec. He had four keys under EAP, but only one, the last of them, was related to Symantec, underlined all the other files in system32.

  I have imported the keys in my broken machine, removed the a key which was related to symantec and without even having to restart... everything has been corrected...

  so... here my suggestion and I hope everyone can comments if it works, so we have more information if it's the order of the keys or just the presence of bad entries... but I would say, start by looking at your key under EAP and see if there's anything that references the dll files which may not exist on your machine.

  If you don't have these keys, either remove the key, either try to put the file in place which is referenced, assuming he hasn't.

  We will do other tests internally, so I'll feed if we have additional findings.

  Good luck.

• Unable to connect to the Oracle Forms cmdlet after 30 Seconds (OATS)

  Hello
  
  While playback get error of OATS (Oracle Application Testing Suite) am most of the time 'Impossible to connect to the Oracle Forms applet after 30 Seconds (OATS)'.
  
  Please suggest solution for this type of error. I can't go further with this type of error.
  
  Kind regards
  Sairam

  Hi Sairam,

  GoTo OpenScript preference and change timeout for reading of the EBS/forms.

  Launch OpenScript, click view and select Preferences OpenScript. Then select Oracle EBS/functional forms under playback. Change timeout value.

  Kind regards
  Dembélé M

• Unable to connect to the URL of planning after new installation & configuration 11.1.2

  I installed 11.1.2 on Windows 64 bit environment and configured.
  
  This is my environment:
  Box 1. FS, Essbase, Weblogic, Oracle HTTP. Successfully set up and works great no problem (I don't not configured web server in FS yet)
  Box 2. Planning. Installation and configuration was successful.
  
  Question: but unable to connect to the URL http://servername:8300/hyperionplanning/logon.jsp and http://servername:19000/hyperionplanning/logon.jsp (I'm not expecting 19000 will connect)
  
  Trobleshooting:
  When executing netstat, 8300 does not run on this box.
  Also configured to 'Manage the clusters of planning' with no luck.
  The WebLogic (11g) server indicated State planning is unknown.
  Diagnosis indicates: 1. There is no 2 System-jazn-"Data.xml" file. Web application for planning has no reason of error: java.net.ConnectException: Connection refused: connect
  I stopped and restarted service app planning several passages of time without any problem but unable to connect to the URL and no port is running.
  Journal of planning does not reveal the error messages.
  EMP system log shows ServletContainerAdapter manager not initialized successfully
  There is no error in start-HyS9Planning - out .log.
  Start-HyS9Planning - error.log shows the requested service has already been started.
  
  There is an error in the validation log:
  
  [2010-10 - 06T 10: 18:23.171 - 04:00] [EPMVLD] [ERROR] [EPMVLD-02017] [oracle. EPMVLD] [tid: 25] [ecid: 0000Ii1u3V8EcLPMyeU ^ MG1Cf8KW00000E, 0] [SRC_CLASS: com.hyperion.cis.validation.checkers.impl.AppServerChecker] verification code error response: []
  java.lang.Exception: java.net.ConnectException: connection refused: connect
  at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:153)
  at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:66)
  at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplication(AppServerChecker.java:159)
  at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplications(AppServerChecker.java:119)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.mozilla.javascript.MemberBox.invoke(MemberBox.java:160)
  at org.mozilla.javascript.NativeJavaMethod.call(NativeJavaMethod.java:243)
  at org.mozilla.javascript.optimizer.OptRuntime.callProp0(OptRuntime.java:119)
  to org.mozilla.javascript.gen.c14._c0(./scripts/webappcheck.js:2)
  to org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
  at org.mozilla.javascript.ContextFactory.doTopCall(ContextFactory.java:401)
  at org.mozilla.javascript.ScriptRuntime.doTopCall(ScriptRuntime.java:3003)
  to org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
  to org.mozilla.javascript.gen.c14.exec(./scripts/webappcheck.js)
  at org.mozilla.javascript.Context.evaluateReader(Context.java:1119)
  at com.hyperion.cis.validation.RunningEnviroment.processSource(RunningEnviroment.java:222)
  at com.hyperion.cis.validation.RunningEnviroment.runScript(RunningEnviroment.java:279)
  to com.hyperion.cis.validation.RunningEnviroment.access$ 000 (RunningEnviroment.java:40)
  to com.hyperion.cis.validation.RunningEnviroment$ 1.run(RunningEnviroment.java:132)
  Caused by: java.net.ConnectException: connection refused: connect
  at java.net.PlainSocketImpl.socketConnect (Native Method)
  at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
  at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
  at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
  at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
  at java.net.Socket.connect(Socket.java:519)
  at sun.net.NetworkClient.doConnect(NetworkClient.java:158)
  at sun.net.www.http.HttpClient.openServer (HttpClient.java:394)
  at sun.net.www.http.HttpClient.openServer (HttpClient.java:529)
  to sun.net.www.http.HttpClient. < init > (HttpClient.java:233)
  at sun.net.www.http.HttpClient.New (HttpClient.java:306)
  at sun.net.www.http.HttpClient.New (HttpClient.java:323)
  at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient (HttpURLConnection.java:852)
  at sun.net.www.protocol.http.HttpURLConnection.plainConnect (HttpURLConnection.java:793)
  at sun.net.www.protocol.http.HttpURLConnection.connect (HttpURLConnection.java:718)
  at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:111)
  ... 21 more
  
  ]]
  
  
  What am I not doing?
  
  Thanks for your help in advance!
  
  Published by: VenuRamini on October 6, 2010 07:25
  
  Published by: VenuRamini on October 6, 2010 07:35

  Make sure that the Weblogic password is correct in the boot.properties and restart the services.

  Boot.properties files would be present in D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\\security\boot.properties

  For example,.

  For APS:
  D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\AnalyticProviderServices1\security\boot. Properties

  For Regional service:
  D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices1\security\boot. Properties

  HTH-
  Jasmine.

• WNDR 3400v3 unable to connect to the Firmware update automatically after ISP

  After the upgrade to Version Firmware to 1.0.0.48

  I am unable to connect automatically to ISP using PPPoE configuration, using the connection information...

  I am forced to use, no connection required during installation and each time you connect via the portal of the ISP.

  Need help.

  To your "connection Mode" set it to always on.

  If it still does not work, please post a screenshot of this window you get.

  By the way, have you tried to reset the router after firmware upgrade?

  If you have not, please push the reset button on the router for 10 seconds with a paperclip.

  After the reset, reconfigure the router.

  Let us know what happens.

• Unable to connect on the Messages or FaceTime after upgrading to Sierra

  Good afternoon! After upgrading my MacBook Pro (13-inch, mid 2010) to macOS Sierra (10.12.), I am unable to connect to Messages or FaceTime. They worked fine before the upgrade.

  • Messages: After entering my Apple ID and password, I get the message "Could not sign in iMessage." "Could not sign. Please check your network connection and try again. "or"an error has occurred during authentication. "My network is connected to the network (where this message), and the password is correct. Also, I have generated a password app specific to Messages. Enter just grew the message "your Apple ID or the password is incorrect." Messages is works well with my Google Talk and AIM accounts.
  • FaceTime: After entering my Apple ID and password, the engine just turns and it never connects me. Similarly, I have generated a password app specific but use it just gets the message, "your Apple ID or the password is incorrect."

  No idea how I can regain access to these applications? Thank you!

  Reached out to the Twitter account of Apple Support. He proposed to restart. It worked.

• Unable to connect to the Outlook e-mail after that put 9.3.1 update

  I can't connect to Outlook e-mail after set 9.3.1 update.

  "Cannot get Mail.

  The connection to the server has failed. »

  I tried to delete the email account and add it again. The same problem.

  I know that this is a widespread problem now.

  When will this issue be resolved?

  Thank you!

  Yes im also having the same issue but it happened at about 23:30 email hotmail server seems to be down for me but I am on ios 7.1.1 if this isn't a thing of ios. Also tried it on another ipad, iphone and outlook using windows 8.1 so im 99.9 per cent a few hotmail servers are out of service

• I am unable to connect to the internet. I get this error message "Windows does not have to connect to the System Event Notification Service service.»

  my computer is showing this message and custom allow Internet: Windows could not connect to the System Event Notification Service service.  This problem prevents limited users to logon to the system.  As an administrator (which I don't have) you can view the system event log to see why the service did not respond, can anyone help? Please

  original title: can't get on the internet

  Hello

  Try the steps in the following article:

  "How to determine and recover Winsock2 corrupted in Windows Server 2003, Windows XP and Windows Vista":

  http://support.Microsoft.com/kb/811259

• Unable to connect to the printer via ThinPrint error: "serial0: unable to connect to the virtual printer daemon after 25 attempts." The device will be disconnected.

  I started this thread on the debate under of the "Fusion free v2.0.3" but Michael suggested I post this as a new thread, because it turns out that my problem was not due to the much discussed most recent update security Max OS causing ThinPrinting to break.  Whenever I have start up of my (Win XP and Windows 7) VM beta I get the above error message, and therfore cannot take advantage of the ability of merger of ThinPrint print on my printer Mac network.  Michael asked several log files, I have attached 3 in this post and others attached to my next post, so I hope you smart people of VMWare will be able to help me with this problem.  Thanks in advance!

  Ron

  I got a response from ThinPrint with a possible solution - the problem may come from a file/etc/printcap obsolete, which refers to a computer that no longer exists. The DNS lookup may be a delay of 30 seconds and can block the process of thnuclnt. The file/etc/printcap file contains a copy of the configuration of the printer, but it is not necessary for the thnuclnt. It is generally not yet created by OS X by default, but it seems that previous updates to the OS X system or printer drivers can be turned on at any given time. Subsequently, the option got turned off, but the old file was left with outdated information.

  Could you try to rename the file/etc/printcap file and see if it eliminates the delay of 30 seconds? To do this, run Terminal and use the following command:

  sudo mv/etc/printcap /etc/printcap.bak

• Unable to connect to the App store on iOS 4.2.1

  Hi guys!

  I decided to take my iPhone good ol' ' 3 G out of the darkness to use it as a backup phone in case of any situation, unhappy and unable to connect to the iTunes/App store after several tests. I checked my wifi connection and it worked well on Safari. Someone here has a tip on how to fix? Or has Apple really stop its connectivity on the older iOS app store - are

  After seeing your post, I booted up my 3G to test and noticed the same thing. I thought it might have something to do with Date & Time settings. I noticed that, even though 'Set automatically' performed, the phone thought that the current date was in September of last year. Since the App Store will not work if the date and time settings are incorrect and that the phone can't connect to the server to get the right time, I would say that is why you don't get on the App Store (assuming that you also see the anomaly of the moment).

  I have an iPod touch 2nd generation, which also iOS 4.2.1 and will test it tomorrow there.

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• series 0: could not connect to the printer virtual daemon after 25 attempts

  I get the error message that the virtual printer daemon can't connect whenever I start the guest system and I can't get my printer to work from Windows.  He used to work when I first set up my VM.  Any suggestions on what this means and how to fix it?  I'm on Mac OS X 10.5.6 on a MacBook Pro and have Windows XP Home Edition on the virtual machine.  Also, when the printer works on the virtual machine, it still required me to disconnect, and then reconnect the USB connection to make it work.

  If you Search the forums for "Failed to connect to the virtual after 25 attempts printer daemon", the first result from that moment is Re: unable to connect to the printer via ThinPrint error: "serial0: unable to connect to the virtual printer daemon after 25 attempts." The unit will cut'. In this thread, mudaltsov follows the problem down to one/etc/printcap needless - move which should solve the problem.

• Unable to connect to the website of 'http', steam and App Store

  I use a Macbook Pro 13 inch, mid-2012 with OSX Yosemite 10.10.5. I had a problem with my network which I cannot connect to the 'http' site in Google Chrome or Safari. It shows ' site is not reachable, refused to sign, ERR_CONNECTION_REFUSED '. In addition, I can not connect to Steam and it shows 'code error - 102, unable to connect to the server. "Server may be offline or you cannot be connected to the internet". I can access the App Store, but most of the app doesn't load the image, and it seems weird that I cannot install or update applications from the App Store. It is said "we could complete the purchase. Cannot connect to the server'. Finally, I can connect to the Web site "https" as google.com, facebook.com, youtube.com, and apple.com. I don't know what I was doing before that happens because I'm not all of the firewall settings or IP network since I bought it. I don't even no matter what antivirus installed on my macbook. I do not think that the problem of my wifi because it works fine on my other devices. I try to fix but still have no luck.

  Here what I was trying to fix my problem:

  1. I try to restart the computer, then reconnect to my wifi - nothing fixed

  2. I have try to change the DNS 8.8.8.8 and 8.8.4.4 - still not fixed, worse still, unable to connect all Web sites

  3. I try to delete the Library/Preferences/SystemConfiguration folder and restart the computer - nothing has changed

  4. I try to start safe mode and it works very well and when I reboot to normal, it still happens

  5. I try to remove and re-add the Chrome in the firewall settings to allow incoming connections - nothing fixed

  6. I try to delete all the data navigation and cookies in Chrome and Safari - still not fixed

  7. I try to plug in the ethernet cable, as a first step, it works very well. Then, when I disconnected and reconnected again for the second time, and then he had the same problems.

  What I saw here, I check that iTunes had recently many updates with the same version of iTunes 12.4.1 since June 4, 2016 (1 time), June 5, 2016 (1 time), June 6, 2016 (2 times), June 7, 2016 (7 times), June 8, 2016 (2 times), June 10, 2016 (9 times), June 11, 2016 (1 time) and June 12, 2016 (1 hour). I don't know if this is normal or not because he had to download and installed about 24 times with the same versions! It is possible that iTunes is the cause of this problem? Any help and suggestions that can solve my problem? Thanks in advance!

  Is your date and time is set correctly? 5 minutes from the perfect?

• At the opening of some Web pages I get a msg 'unable to connect to the server', but it works very well in startup

  The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube.  This happens when I use Safari, Firefox and Chrome.  Yet if I'm in Safe Boot mode it works fine.  I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked.  I'm not very computer savvy either so don't know much of what I do with this technical stuff.  I emptied the caches, but that did not work.  Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test.  I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below.  Help, please!

  The system version: OS X 10.11.1 (B 15, 42)

  Kernel version: Darwin 15.0.0

  Boot Mode: Normal

  Model: MacBookPro11, 1

  FileVault: on

  The System Diagnostics

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  Diagnosis of the user

  2016-04-12 AssetCacheLocatorService crash

  Accident of GarageBand 2016-04-12

  Kernel messages

  Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019

  Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit

  Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052

  12 apr 17:20:51 0xe00002db questioned the file opening error

  -the last message repeated 1 time.

  Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066

  Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit

  Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476

  Apr 12 21:54:58 opening error 0xe00002db questioned the file

  -the last message repeated 3 times.

  Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988

  Hi AussieEgypt,

  Thank you for using communities Support from Apple.

  If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac.  Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:

  Test your login items

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connection points

  See you soon.

• HP Envy Notebook dv6: unable to connect to the proxy server

  I saw an error message "Unable to connect to the proxy server" when I try to connect to the internet via WIFI, even if the label shows who is connected to my home router.

  HR63 wrote:
  

  Thanks for the tip, there is so much information, the laptop with this problem belongs to my daughter and because she doesn't have an internet connection (can not download anything), there is another way to fix it?

  I don't know because the online is where most of the instructions are locate in. I copy and paste the links here, but unless you can print them out or print the online pages it becomes hard, but here are the parts of the txt of it. +

  http://malwaretips.com/blogs/unable-to-connect-to-the-proxy-server-removal/

  How to remove "Unable to connect to the proxy server" (Virus Removal Guide)

  This page is a comprehensive guide, which will remove "Unable to connect to the proxy server" virus from your computer and any other adware program that may have been installed during the installation process.
  Please complete all of the steps in the correct order. If you have any questions or doubts in any point, STOP and ask for our assistance.
  STEP 1: restore the default proxy to your machine settings
  STEP 2: remove failed to connect to the ad software proxy server from Internet Explorer, Firefox and Google Chrome with AdwCleaner
  STEP 3: delete impossible to connect to the proxy server with Junkware Removal Tool browser hijacker
  STEP 4: delete impossible to connect to the virus pop up server proxy with Malwarebytes Anti-Malware free
  STEP 5: check a second time for the "unable to connect to the proxy server" malware with HitmanPro
  (Optional) STEP 6: delete impossible to connect to the proxy server of Internet Explorer, Firefox and Google Chrome ads

  http://www.geckoandfly.com/9275/Internet-connection-error-unable-to-connect-to-the-proxy-server/

  It is with IE

  Step 1 - launch Internet Explorer

  Step 2 - Click the icon "but" it looks like a gear wheel...

  Step 3 - select 'Internet Options '.

  Step 4 - Select the 'connection '.

  Step 5 - Click Lan settings

  Step 6 - uncheck "use a proxy server for your LAN (these settings may not apply to dial-up or VPN connections)."

  Step 7 - click 'Ok' to save the changes

  If you are using a proxy server, check your proxy settings, or check with your network administrator to make sure that the proxy server is running. If you don't believe that you should use a proxy server. Here's a video tutorial:

  Also, if you can since I don't remember which browser your help that gave you this message that I had to go with IE as a default.