User action recorder

Similar Questions

• M60 Shutdown without user action

  Hello
  I use a Satellite M60 laptop with Win XP and I bought this laptop on 11/15/2005.

  I use hypotheek virus protection software and some anti-sypware tools.

  But from the beginning to use notebook without user action.

  I can't solve the problem because the parameters for the laptop are "Office" and never "stop" for the hard drive and monitor in the energyoptions.
  'Standby' is set to 'never' too.

  I thought, that Toshiba tools are the problem and so I uninstall them, but this does not solve the problem.

  Who have had the same problem and solved it?

  Thanks a lot for all the replies.

  Wolfgang

  Hello

  Well, one of the reasons why the phone stops without any action of the user is an overheating problem. If the temperature drops to a critical limit inside the laptop for the operating system to stop the unit and protect it.
  Well, it's not easy to say why it happens. Maybe don t cooling modules work correctly.
  I see that your laptop is under warranty and all replacements and repair procedures will be done free of charge. In this case, I propose to contact the ASP (Toshiba service partner). He can do a diagnosis test and replace certain parts if it of necessary.

  But first I would recommend to recover the device with the recovery CD to test if she s a software or hardware problem.

  Good bye

• How to detect a user action in the graphic palette with a node of the event?

  Hello

  is it possible to detect a user action in XY-Graph "graphic palette" with a node of the event?

  Thank you very much and best regards,

  Michael

  Hi Michael,

  you only need a toolset for all 6 graphs? Make your own with a few buttons (custom) and you're fine...

• I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost.

  original title: robocopy

  I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost. So far, that's what I did, I used \\server1\share \\server2\share/sec /mir robocopy and robocopy \\server1\share \\serve2\share/e/s /copyall. It seams like they copied all files with the permissions of the user for the files, but not files. For example, if a user makes a folder with the files in the folder appear them have permissions appropriate for them but not the root folder or subfolders, they did... How can I fix this and what is the difference between / s /mir and/e/s /copyall?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How can I prevent standard users access records personnel administrator for example. photos and documents

  How can I prevent standard users access records personnel administrator for example. photos and documents

  Hello bh51,

  Did you run your antivirus as well as any spyware removal?  As davidhk requested, then you are able to turn sharing off the coast, but it just doesn't work?   I suggest creating a new folder and move the data, and then see if other users are still able to view these.

  Please let us know status.

• Action Recorder - mounting, cut the screenshots

  PSR is SUPER COOL! the action recorder is great, but I have 4 monitors running, and screenshots always show all 4 monitors. I can't see how to crop images of screen capture. Can you direct me where to learn it?

  Thank you!

  PSR is SUPER COOL! the action recorder is great, but I have 4 monitors running, and screenshots always show all 4 monitors. I can't see how to crop images of screen capture. Can you direct me where to learn it?

  Thank you!

  Hello

  If you have Microsoft Office Word 2007 is installed, you can open the xxx.mht file in this program.

  Select the image you want to edit, click the Format tab, and use the crop tool.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Remove steps from the action recorder

  I used ESP to record a sequence which involved scroll down a list, click English UK under the spell, check the language in Windows Live Mail.  However, ESP made a multitude of steps for the scrolling action.  It would have been nice to be able to suspend the recorder until I got to the language, and then I wanted to continue.

  Therefore, it is possible to remove certain steps in the saved file?  Otherwise, it would be a very good tool.  You can also join 2 files RDP would work just as well.

  Thanks for any help.

  Hello

  Unfortunately, there is no option to remove steps from action recorder recorded file or to join the RDP files.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PSR - (Action Recorder)

  I am wanting to know what versions of Microsoft Windows 7 ESP (Action Recorder) will appear on?

  I guess that all the versions. Nothing is mentioned about versions.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-use-problem-steps-recorder
  In addition, you can download the program for XP and Vista as well.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b72d3ac2-4352-4184-9992-e122dbb80883&displaylang=en
  In a world without walls and fences, who needs windows and doors?

• PROGRAMMER (USER) DEFINED RECORDS

  Hi all;

  
  

  I do self - study of PL/SQL concepts for user-defined folders.

  I get the error.
  

  
  

  SQL > desc emp;

  Name                                      Null?    Type

  ----------------------------------------- -------- ----------------------------

  EID                                               NUMBER

  ENAME VARCHAR2 (15)

  VARCHAR2 (10) EQUAL

  ESALARY VARCHAR2 (15)

  ECITY VARCHAR2 (15)
  

  
  

  SQL > select count (*) from emp;

  COUNT (*)

  2

  
  

  PROGRAMMER (USER) DEFINED RECORDS
  

  
  

  SQL > DECLARE

  2 C_cr CURSOR IS

  3. Select ename, equality, esalary, eid, ecity emp;

  4 EMP_DETAILS RECORD TYPE IS

  5 (e_id emp.eid%TYPE,

  6 e_name emp.ename%TYPE,

  7 e_qual emp.equal%TYPE,

  8 e_salary emp.esalary%TYPE,

  e_city 9 emp.ecity%TYPE);

  10 emp_detail e1;

  BEGIN 11

  12 C_cr OPEN;

  LOOP 13

  14 C_cr FETCH in emp_detail;

  15 WHEN OUT C_cr % NOTFOUND;

  16 DBMS_OUTPUT. Put_line (emp_detail.e_id | emp_detail.e_name | emp_detail.e_q ual | emp_detail.e_salary | emp_detail.ecity);

  17 END OF LOOP;

  18 DBMS_OUTPUT. Put_line (C_cr % ROWCAMOUNT);

  19 CLOSE C_cr;

  20 END;

  21.

  emp_detail e1;

  *

  ERROR on line 10:

  ORA-06550: line 10, column 12:

  PLS-00201: identifier "E1" must be declared.

  ORA-06550: line 10, column 12:

  PL/SQL: Ignored Element

  ORA-06550: line 14, column 17:

  PLS-00320: the declaration of the type of the expression is incomplete or

  Malformed

  ORA-06550: line 14, column 1:

  PL/SQL: SQL statement ignored

  ORA-06550: line 16, column 22:

  PLS-00320: the declaration of the type of the expression is incomplete or

  Malformed

  ORA-06550: line 16, column 1:

  PL/SQL: Statement ignored

  
  

  
  

  SQL > select * from v version $;

  BANNER

  ----------------------------------------------------------------

  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod

  PL/SQL Release 10.2.0.1.0 - Production

  CORE 10.2.0.1.0 Production

  AMT for Linux: Version 10.2.0.1.0 - Production

  NLSRTL Version 10.2.0.1.0 - Production

  Thank you all;

  MY QUESTION IS: type_name, record_type must be the same?

  It is not necessary to be the same. Once you create a record type, then it might be assigned to different variables, such as:

  SQL > DECLARE

  2 C_cr CURSOR IS

  3. Select ename, equality, esalary, eid, ecity emp;

  4 TYPE EMP_DETAILS IS RECORD

  5 (e_id emp.eid%TYPE,

  6 e_name emp.ename%TYPE,

  7 e_qual emp.equal%TYPE,

  8 e_salary emp.esalary%TYPE,

  e_city 9 emp.ecity%TYPE);

  10 emp_detail EMP_DETAILS;

  11 emp_detail_2 EMP_DETAILS;

  12 emp_detail_3 EMP_DETAILS;

  13 l_id NUMBER;

  
  

  Now, he becomes similar to a variable_type of variable_name in the declaration section. Emp_detail or emp_detail_2 is a variable of type EMP_DETAILS, like the variable l_id that can hold values of type numbers.
  

• CS6 stamp tool does not work with action / record (record of the tool is activated) other tools works

  CS6 stamp tool does not work with action / record (record of the tool is activated) other tools works

  At the same time recording tool was not possible and if you install Adobe Scriptlistener plugin Adobe will disable the recording of the tool its never an option.

  I use and record the actions all the time and was looking forward to the registration tool when Adobe announced it.  But I found what they delivered was very limited because of the restrictions. I don't like that Adobe disables the registration on my machine tool.

  The amount of data that gets reorganized also seems to vary between machines.  I found that Action recorded on a fast machine are not usable on a slow machine.  Recorder fast machine too much data.

  You use this action on the documents must also have the same size and resolution as the document that you have saved the action on. Quite a restriction.

  You can also be foxed in 2014 CC sett here Photoshop CS6 - recording of the clone in an action tool works incorrect on replay.

• URL of list of the user-entered recordable

  I found the following on the net which is a basic example of using the sharedObject method to allow users to record data, however I would like to improve this example, whereas in the text box, the user can enter different URLS, then when each url that the user entered is clicked, it will sail to that specific page.

  I know that allowing a user to simply enter a url into a single text box and then have the link to the relevant site once clicked is a simple process, but I want to achieve this in the following example, so that users can save their list of URLs, return their entire list empty or perhaps remove each link individually by clicking on it , and then clicking a button Delete.

  My main problem is that it seems the selectedItem.text property are not accessible in order click on a text box and apparently not the itemClick function is available in a text box as it can in a TileList for example, so I don't know how I can get it to navigate to the url contained in each element when each item is actually clicked. The text box should be changed to another type of component to integrate it? :-

  <? XML version = "1.0" encoding = "utf-8"? >

  < mx:Application ' xmlns:mx = ' http://www.Adobe.com/2006/MXML "

  " layout ="absolute"" "

  creationComplete = "initSharedObject ()" " >

  < mx:Script >

              <! [CDATA]

  import flash.net.SharedObject;

  public var sharedObj:SharedObject;

  private function initSharedObject():void{ }

  sharedObj = SharedObject.getLocal ('myTasks');

                  if (sharedObj.size > 0)

  textareaTasks.text = sharedObj.data.tasks;

              }

  public function localconnectionHandler(msg:String):void { }

  textareaTasks.text = textareaTasks.text + msg + "\n"

            }

  private function clearTasks(event:MouseEvent):void { }

                = textareaTasks.text "" ;

            }

  private function saveTasks(event:MouseEvent):void { }

  sharedObj.data.tasks = textareaTasks.text;

  sharedObj.flush ();

            }

  private function deleteSavedTasks(event:MouseEvent):void { }

  sharedObj.clear ();

              }

              ]] >

  < / mx:Script >

  "" < mx:Panel horizontalCenter = "0" red ="0.5" verticalGap = "15" " "

  "" paddingLeft = "20" paddingRight ="20" paddingBottom = "20" paddingTop ="20"" "

                height=" 300 " >

  " < mx:Label text = 'your tasks are... " />

  " < mx:TextArea id ="textareaTasks"" "

  top=" 20 "left =" 20 "right =" 20 "bottom =" 20 "

  width=" 100% "height =" 100% " />

  < mx:HBox >

  " < mx:Button id ="btnClearTasks"click ="clearTasks (event)"

                          label=" Clear Tasks " />

  " < mx:Button id ="btnSaveTasks"click ="saveTasks (event)"

  " label = 'record the tasks to the Shared Object"""/ >

  " < mx:Button id ="btnDeleteSavedTasks"click ="deleteSavedTasks (event)"

  " label = 'delete saved tasks Shared Object"""/ >

              < / mx:HBox >

  < / mx:Panel >

  < / mx:Application >

  If this post answers your question or assistance, please mark it as such.

  Very well. The shared object works correctly now. Only the file from the main application had to change. The AddURL component above is fine as it is:

  
  http://www.Adobe.com/2006/mxml '.
  layout = "absolute" creationComplete = "initSharedObject (); » >
   
      Import mx.events.ListEvent;
  Import mx.collections.ArrayCollection;
  import flash.net.SharedObject;
  Import mx.managers.PopUpManager;
  import AddURL;

  private var sharedObj:SharedObject;
  [Bindable] public var urls:ArrayCollection;
       
  private function initList (): void {}
  URL = new ArrayCollection();
  }

  private function initSharedObject (): void {}
  initList();
  sharedObj = SharedObject.getLocal ("urls");
  If (sharedObj.size > 0) {}
  var urlList: Array = sharedObj.data.urls.split(",");
  URL = new ArrayCollection();
  for each {(var url: String en urlList)}
  If (url! = "") {}
  var urlObj:Object = {url: url};
  urls.addItem (urlObj);
  }
  }
  }
  }

  private void saveUrls(event:MouseEvent):void {}
  var urlList: String = "";
  for each {(var obj:Object in the URL)
  urlList += obj.url + ",";
  }
  sharedObj.data.urls = urlList;
  sharedObj.flush ();
  }

  private void deleteSavedUrls(event:MouseEvent):void {}
  sharedObj.clear ();
  initList();
  }

  public void gotoURL(evt:MouseEvent):void {}
  navigateToURL (new URLRequest (urlList.selectedItem.url), "_blank");
  }
       
  private function addURLDialog (): void {}
  PopUpManager.createPopUp (this, AddURL, true);
  }
       
  public void addURL (url: String): void{}
  urls.addItemAt ({url: url}, 0);
  }
  ]]>
   
   
  paddingLeft = "20" paddingRight = "20" paddingBottom = "20" paddingTop = "20".
  height = "500" >
     
       
             
     
     
  Low = "20" width = "100%" height = "100%" dataProvider = "{URL}".
  alternatingItemColors = "[0xcee7f6, 0xf4d5f7]" rowHeight = "30" >
       
         
           
             
  Click = "outerDocument.gotoURL (Event); » />
             
             
  Click = "{outerDocument.URLs.removeItemAt (outerDocument.UrlList.SelectedIndex)}" / > "
           
         
       
     
     
       
  label = "URL" clear / >
       
  label = "Save URLs to Shared Object" / >
       
  label = "delete saved Shared Object URLs" / >
       
  label = "reload saved Shared Object URLs" / >
     
   
  

• Let the user add records while asking the VM?

  I need to allow users to request additional disks when you apply for a virtual machine. Preference as much as they want, but I need to host a minimum of four additional disks.

  I saw a screenshot online (I have attached to this post, he also linked here) where a plaintiff could click a button 'Add Volume' to dynamically add disks having a virtual machine. I can not get this option. I changed the 'Volume up' option in the plan of action for quite a number, but it is apparently something else I do too.

  Any suggestions?

  I thought about it. If you do not specify a maximum amount of storage in the blueprint, then users cannot add records while calling for a virtual machine. Adding a caused large maximum disk size the 'Add a volume' button appears when you ask for the virtual machine.

• Is there any way to access the disabled user account record? : - 1.5 CWMS MR1

  Hello

  We, users who represent we want to turn off, but in that user profile recordings are available.

  As currently CWMS have no download option so we / he cannot store locally

  We want to know is there any way we can access his record after disabling his account?

  (FYI :-sso to authantication, we have implemented)

  Help & information will be our concern! Help, please

  Thank you

  Pratik Nimablkar

  Hey Pratik,

  As long as registration has been shared (manually via the share record option that has the host or through the e-mail received by participants) and then the link for registration will be still valid after the user is disabled.

  There is no other way to access this disk once the account is disabled, also to reactivate it, log and generate the share link for records associated with the account.

  Thank you

  Derek Johnson

  TAC Conference

• Isolate a selected group in Action recorded

  I think that the title does a good job explaining what I'm trying to do: I record a set of actions, and I need to isolate a group selected in the middle of this action game. However, making that the action creates the event in recorded stock list...

  How do I get there?

  Thank you

  I modified your action (Neutral Axis-red Plot) a little. It requires a Mode of insulation.

  It is recommended to choose "Step by step" in the playback Options (see the Actions palette menu).

  How to use the action: first select the small area on the left side, and then launch the action.

  Have a go.

  https://drive.Google.com/file/d/0b-IWkNSl4y_3Ny1hQzh6SUZNMlU/view?USP=sharing

• I get two boxes for each user action confirmation message.

  I have surgery assign task with two Actions of the user, to appoint and release. I checked the box for require a confirmation message box and now I get two boxes of message for each action. Any ideas?

  I present to you a PDF flattened in the workspace and this might have caused the problem. The problem has been resolved by:

  In the data section & presentation of the special operation assign under player posting, see submit by the reader, to submit in PDF format