User "Add a printer" failure of the interface

Similar Questions

• How can I add a print icon to the toolbar?

  My users want to print specific topics. How can I add a print icon in the toolbar? I don't see this option when I generate. Maybe it depends on skin that I choose?

  Hello

  You must create a custom button. See extract of 24 on the site of Peter: http://www.grainge.org/pages/snippets/snippets.htm

  Take a bow

  Willam

• While trying to add a printer I get the error message "windows can't open add printer access denied»

  Original title: Windows and printer

  When I try to add a printer I get this message "windows can't open add printer access denied" why is this?

  Hello

  Thanks for the reply with the status of the issue.

  Let us try the following steps and check if it works for you.

  a. Click Start.
  b. click on run and type "rundll32 printui.dll, PrintUIEntry /il" without quote.

  If this does not work then scan tool (SFC) System File Checker. This will help you to replace missing or damaged system files.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows 7 system files: http://support.microsoft.com/kb/929833

  Please respond with the State of the question, so that I can confirm that the printer you had is solved.

• I want to add a printer, but get the error message "print spooler service does not work."

  I can't print from my computer.  This has happened with no other visible defects on the computer or the printer.

  When I use the printer in case of problem, and hit the 'add printer' link, I get the error message "print spooler service is not."

  "I did a search on"print spooler"but got no result

  Duane

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  If the suggestions below do not resolve your problem, after back and don't forget to include the following information:

  • The version of Windows you have, including service pack (start > run > winver > OK)
  • The brand and model of printer you have (includes the manufacturer, model and model number, as in HP Deskjet 6800)
  • How the printer is connected to the computer (parallel, USB, network, wireless, etc.).
  • It happened just before this symptom started
  • What application antivirus you have and if your subscription is up to date and has been maintained continuously
  • The full text of the error messages related to printing, without paraphrasing

  
  

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• How can I add a print option in the right click menu

  I need a print option when I right click on a pop-up window - which is a program that I need.

  Install this module: https://addons.mozilla.org/en-US/firefox/addon/print-print-preview-update/?src=ss

• As you add or remove fields in the IOM console

  Hello
  I have a friends of query, you can add or remove fields in the interface where users are created in the IOM (web console).
  Someone help me because I was able to perform this procedure.
  I am very grateful for his support.
  JLK

  Hello

  To add or remove new fields on this page, you must use the form "User-defined fields" console design. (Ask the 'users' form and add your fields it).

  If you want to remove a field by default the form to create a user (Email, name...), you will need to make changes to the FormMetadata.xml file. You can search in the forum the key to the word "FormMetadata.xml", there are a lot of posts on this type of customization here.

  It will be useful.

• Page numbers need to change automatically when users add a new page to a form fillable

  In the headers and footers, I chose < < Page 1 of n > >. My form is a long page, but I have a button that allows you to create a second page if the user needs. However, if a user decides to create a second page, the footer does not '1 1' '1 of 2' on the first page and then "2 of 2" on the second page. "" Instead, the two say just '1 1'. How can I change this so that when users add new page, it changes the numbering?

  Thank you!

  This would require the use of a script that generates the page numbers

  automatically whenever the file is loaded or saved.

• After a time when the data added to the interface user blocked - WPF

  I am currently using WPF graphics.

  I have created a simulation that describes the problem that I have experienced in my application (attached).

  I have two sons, we generate data (in my application gets the material data every second) and the other copies the data in the user interface (copy the data to a variable, which bind to the data source).

  Every second I get 1000 points and adds them to the data. The first seconds it works well, after a while it gets stuck.

  I added a listbox control that displays the time, need to add the variable data and gradually increases.

  

  I have two questions:
  (1) did whenever I have add data, it attracts all the existing data again? If so, theres a way to improve or prevent this behavior?
  (2) how many points can represent the graph at a glance? (which is the limit of the graph)?

  Thank you

  HODAYA Shalom.

  Your example updated debugging, I think that the question is the Dispatcher.Invoke calls that you use to communicate with the user interface thread. Since you use the delegate only, all calls are sent with Normal priority, which means that events of low priority (as made graphic, or updated on day of data binding to scales) can get transformed. Using a lower as priority Render four Invoke calls not glued to the UI in my tests.

• HP b110 printer range, try to print I got the following message: "failure ink system - error 0xc19a0003.

  I bought a HP b110 printer 1 year and there are 8 days, so is no longer under warranty. Yesterday, when trying to print, I got the following message: "failure ink system - error 0xc19a0003. I have renewed all the ink cartridges (I only use original HP) to nothing does not...

  Any ideas would be appreciated.

  Thank you.

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP6830: Failure of the print queue

  HP replaced my 6830 due to failure of the print head. New printer works proud desktop using Vista. Previuosly I could print from my laptop wireless as well, but it's time the print queue says printing, fails to print and return to errot impression. I know that thw laptop is connected to the printer thr and I even can it ping ipconfig without problem. I have been through software support, and to the low load options hear everything without any result. I am now confused.

  Hi @3391816Sablenip,.

  I read your post and see that the replacement printer is wireless print on the Windows Vista-based computer, but not the laptop running Windows 7. I will definitely do my best to help you.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server.
  Type the IPv4 address in the address bar of your web browser. (Internet Explorer) It to load the page.

  You mentioned that you can test the printer, just to check a real contact, check the network IPv4 address on the computer to see if the first 3 sets of numbers match the IPv4 of the printer address.

  Press the Windows and R key at the same time, to show the command line run, type cmd, then type Ipconfig.
  Check the IPv4 address.
  Now, check the IPv4 address for the printer.
  If this isn't the case, then the printer and the computer are not on the same network.

  Do the first 3 sets of numbers match?

  Check the address IPv4 of the computer to verify that it matches the IPv4 of the printer address.
  Printers and devices, right click on the printer, on the left, click printer properties, select the Ports tab, click on Configure Port.
  If they do not match and then close the window configure the Port and click on create a port and follow the instructions in the wizard.

  Type the IPv4 address.
  Make sure the printer is online.

  Test the printer. If creating the new port doesn't work, run the Add Printer Wizard.

  If you're still having problems, download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If the problem persists, try the following steps to see if it will be useful. HP printers - print jobs stuck in the print queue (Windows).

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• Lost all the icons of printers in the rear panel Installation Acrobat Reader X 10. Every time when I tried to add a printer (to re - install): Pc autostopped print spooler.

  Uninstalled Acrobat Reader, problem still there.

  The system restore.  Still no help.

  Is gone at the beginning-Online Admin Tools-online Service =>-online Start print spooler.

  But as soon as you click on "Add a printer", auto pc stopped print spooler again.

  (Think that a 'Printer setup' command has been blocked in the pc...) ?

  Please read one of the web pages I've linked to step B.

  Did you go to the HP support as suggested?  I sounds like you need to re - download the software.  Again, read "Article 1."
  What makes you think that "Active X" has nothing to do with your problems? Or are you confused 'Active X' with Adobe Reader X (for example, Adobe Reader 10)?
  What do mean 'Java Active x?  Java and Active X are two completely different technologies, Sun and Microsoft.  There is a 'Java - Active X Bridge,' but most of the users would not be involved with that.  Where did you get "Java Active X?
  The only thing that you definitely don't want to (and cannot, in any case) is upgraded to Vista.

• Why the standard user can't print on network?

  -Computers A and B are networked through a router Linksys Wireless.

  -An HP printer, set apart, is attached to A computer, via USB

  -Both computers are under XP SP3

  -All users on both computers can access the Internet.

  -All users on A computer can print

  - But only administrators on the computer B can print. Why? !

  It is a maddening problem - I spent hours trying to figure out how to give the ability to print the standard user on computer b. , but it will only print on the network if I give her a Director.

  If I keep him a standard user, he can see the printer. His printer status indicates ready. If he sends a print job, it goes into the queue, it shows that the impression, then disappears into the void.

  Already tried rerunning the wizard of networking on both computers. File sharing and printer are turned on. Nothing works. No one on computer B to print unless I make him an administrator. Then there is no problem. Help, please!

  Tom

  Hi Tony,.

  Try to configure the security settings for printer on the computer a. Click Start-> settings-> printer and faxes-> right click on your printer-> properties-> Security-> Check for permission for everyone... You can also add the UserID from the other computer (computer B) and provide the access rights to the printer.

  I hope this helps.

• Cannot load a user profile... erreo "the failure of the service USER PROFILE SERVICE to connect.

  Hello

  not able to load my 1st admin. The user's profile, every time I try to load the message appears "the failure of the service USER PROFILE SERVICE to open a session. I tried some of those ways, but nothing happens. Please help me with this problem...

  1. reboot your computer and press F8 multiple times until you see a menu similar screen, if you see the Windows startup screen, then repeat this step
  2. highlight and press enter on Mode safe mode with command prompt. Try to connect to it. If it still does not work, proceed to step17
  3. If you are able to connect, once the command prompt appears, type: net user administrator Word of past / active: Yes (you can specify the password for the administrator account.)
  4. If you get a message "the command completed successfully" and then restart your computer by typing: shutdown - r
  5. start again by pressing F8, but this time choose just the SafeMode.
  6. you will be able to log in as administrator with the password set in step 3
  7 hit (windows logo) + r.
  8. type regedit
  9. once the Registry Editor opens, search for HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  10. in the left pane, find the one that begins with S-1-5... and ends with. BAK; If you can't find one, go to step 15
  11 right-click and click Rename, and then change it. TO BAK. BK
  12 right-click with the same numbering but without the. BAK and Add. BAK add at the end
  13. right click on the one that you have renamed in BK and clickRename, remove the. BK
  14. Subsequently, you have activated the. BAK to the end of the second entry in the first. That should probably fix your problem.
  15. If you do not find one. BAK then try this: open Explorer Windows for C:\Users\Default\AppData\Local\Application data
  16. If you find an other Application Data below the one you are on, and then delete. Who should probably also solve your problem.
  17. If you can not log in Mode safe mode, restart and press F8 until you see the menu again, and then press enter highlightingRepair your computer
  18 wait for all the Windows files to finish loading, then hitNext when it asks for the language of the keyboard.
  19. try to connect here also, choose your username in the menu drop-down, type the password, then go to step 23
  20. If it still doesn't work, then if you still have your Windows installation CD, put it in, and then restart your computer.
  21. press F12 until you see a menu of boot options, choose boot from CD
  22. the language of the keyboard and then click Next. Find repair your computer for a little below the center-left.
  23. choose Open command prompt and type: net user administrator / Active: Yes password (here again you can specify a password)
  24. close the command prompt and click on restart and go to step 5 "

  Here's a Fixit for cause of you, so that you don't have to do it yourself:

  http://support.Microsoft.com/kb/947215

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Cannot add a printer from the network

  Hello, in our House, we have 3 laptops and 1 pc. The 3 laptops were able to print to the printer connected to the main computer. One of the laptop crashed and it should restore it. Once restored, we added to the Working Group and tried to add a printer, but whenever we try we get a window that says: X Windows cannot connect to the printer. Access is denied. We don't know what we can do. Any help?

  Did you add the same user for the new PC you used to connect before the crash?  Are the correct printer on the PC service share permissions allows the user of the new PC? Brian Tillman [MVP-Outlook]

• error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or reboot the machine.

  Hello
  After upgrading to windows 7 Home premium 64 bit vista family premium 64-bit, I expected to be able to connect my EPSON Stylus D68 printer on my laptop and leave immediately. However, when I tried to do this installation constantly failed.  Therefore, I went to the manual add the printer option in the menu devices and printers. However I met this error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or restart the machine,"after reviewing the existing forums on the issue, I tried to restart the services option. However, the restart option has been obscured and when I just tried to start then I met an other error message: "windows could not start the spooler on the local computer service, error 1053: service has failed to demand launch or control in a timely. more when I click Properties to the spooler in the description it says failure to read the description. error code: 1813. This is all very frustrating for someone who just wants to add a printer to his laptop computer. can someone please? because I am all of these ideas.
  Thanks in advance,
  Chris.

  Try runing the file system Checker to check the alteration of system files - 1 Option to follow in the folliwng link:

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html