User import with data

Similar Questions

• ABEND in Java User Exit with data in RAW format

  I have an exit Java user from running on a track file that was pumped to the GoldenGate instance in question.  The excerpt starts without any problems, but it gives the following error after I have updated a record that has a type of RAW data as primary key:

  [ERROR] JAVAWRITER(javawriter.c:269): error has occurred (except Java): UEDataSource.createOperation:

  com.goldengate.atg.datasource.InvalidTransactionState: a new operation has been received without having previously received a BEGIN transaction. This can happen when the treatment is resumed in the middle of a transaction, or when there are 'before' in the path of the images which are not sent out of the user (always includes 'GetUpdateBefores' in the settings user-output file).

  I tried a number of things to try to solve this problem, but I can't seem to make this work.  the params for this excerpt currently looks like this:

  extract uePump

  sourcedefs./dirdef/my_defgen.def

  SetEnv (GGS_USEREXIT_CONF = "dirprm/javaue.properties")

  getupdatebefores

  cuserexit./dirprm/libggjava_ue.so CUSEREXIT pass includeupdatebefores

  Table my_schema. B_PLN_DIR, fetchmodcols (PLN_DIR_ID, *);

  table my_schema.*.

  ... I tried to let off of the argument 'includeupdatebefores' to the cuserexit, leaving aside the fetchmodcols of handling for the table with the RAW PK field, but I still get the above error.

  Any help / pointers is very appreciated.

  includeupdatebefores (lowercase) does not work;  You must use uppercase INCLUDEUPDATEBEFORES!

• Import with datapump when exporting datapump was executed as user SYS

  Hi all

  all I have is a dumpfile and an export a datapump log file. Export has been executed as user sys:

  Export: Release 11.2.0.1.0 - Production on mid Dec 3 12:02:22 2014

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  ;;;
  Join EIB: Oracle Database 11 g Release 11.2.0.1.0 - 64 bit Production
  "SYS". "' SYS_EXPORT_FULL_01 ':"sys/***@database AS SYSDBA"directory = data_pump_dir dumpfile = db_full.dmp db_full.log = complete logfile = gestartet wird y
  Mobiltelefondienste participations mit method BLOCKS...
  Objekttyp DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA wird thanks
  Approximately Schatzung mit BLOCKS method: 52.84 GB

  Now I have to import (with datapump) user USER01 and export USER02. But I don't know the name of the source database tablespaces.

  I want to keep the name of the user (USER01/USER02). That's why I created these users in the target database.

  The questions I have are:

  -should I start the import by datapump as user SYS?

  -Should what settings I use to import users USER01, USER02 and data in the target database? Since I do not know the names of tablespaces

  in the source database parameter REMAP_TABLESPACE will not help

  Any help will be appreciated

  J.

  Hi J.

  The questions I have are:

  -should I start the import by datapump as user SYS?

  No, you need to import with a user in the role of "imp_full_database".

  -Should what settings I use to import users USER01, USER02 and data in the target database? Since I don't know the names of the storage spaces in the source database parameter REMAP_TABLESPACE will not help

  Well, an idea is to generate you a schema import sqlfile and see in the ddl in what tablespace, it will try to create objects.

  Impdp------' / as sysdba------' directory = dumpfile = = = USER01, USER02 patterns sqlfile

  For more information, take a look at the import documentation

  http://docs.Oracle.com/CD/B19306_01/server.102/b14215/dp_import.htm

  Hope this helps,

  Kind regards

  Anatoli has.

• Slow response from the user interface with acquisition of data of type long time

  Hi all

  I have a question to ask more out of curiosity than necessity right now. I've built a program that acquires data from the accelerometer and the Treaty in a number of ways: filtering, FFT, FRFS, things like that, but the answer of the UI is still slow, because I need a resolution of frequency of 0.2 Hz for my data domain, which means that the sample acquisition time is 5s and all this awaits before execution.

  My question is this: is there a way to completely isolate the user interface of data acquisition so that it responds immediately?

  I tried a design model of producer consumer with queues, but found everything to be always waiting for samples to be taken. Maybe it was exactly as I did.

  Thank you

  Phil

  If you need to sample for 5 seconds in order to have enough data to analyze, so unless you can "predict the future" and "knowing" the five seconds of data, simply wait for the data that arrives.  Using parallel loops of producer-consumer will allow data acquisition to proceed (for the next 5 seconds of data) while you do the analysis, but you still have to wait for the data to be analyzed.

  Note that the previous paragraph assumes you are collecting data in 5 seconds 'chunks' and analyze each "chunk" (independent) on arrival.  You could also do something like having a "second 5 sliding window" which moves, say, a second at a time, giving your FFT a finer resolution of 'time' (at the expense of their independence).  This would be a (slight) change in your loop of producer (you want to taste in 1 second pieces, accumulate 5 these pieces) and the consumption loop (start analyzing, spewing a FFT every second, while replacing the older "chunk" with the most recent - a queue with loss can do for you).

  Bob Schor

• I have a sony ericsson phone with data cable but cannot import pictures on pc

  I have a sony ericsson phone with data cable but cannot import pictures on pc

  I have a sony ericsson phone with data cable but cannot import pictures on pc

  =====================================
  When you connect via a USB cable... go to... Start / computer...
  the phone should be listed as a drive letter. You should be
  able to access photos from there.

  Also... If the AutoPlay window isn't launchng when the phone
  is connected... perhaps the following will provide some ideas:

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• TMSE user import of CUCM with LDAP authentication

  Hi all

  We are plannig to deploy the CMR for TMSPE users. We must be able to import users of CUCM and keep AD authentication for users who will use the CMR.

  is there anyway we can do this?

  Kind regards

  Hi Alex,

  You can import the user into TMS / TMSPE directly in AD with filter custom.

  Also, you can activate the AD authentication and Windows Server to be part of the domain.

  Once this user can use the LDAP credentials to authenticate for CMR in the premises.

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/TMS...

  Please see page 19 from above the document where you can enter the AD user import.

  You must also enter the configuration of Active directory on the MSDS of network settings.

  Administrative Tools > Configuration > network settings > Active Directory

  It is possible in the most recent version.

  Kind regards

  RACLOT

• Different users accessing the data with different rights

  Hello
  I just started with Oracle and I don't know if
  This is the right way for what I was intending.
  
  I want to allow access to the data (tables, views,...) to different users with different rights.
  For example a user with select only the rights and another with select and insert rights.
  
  Database Oracle 10 g Express Edition is.
  
  Here are the steps I did:
  
  -This user will be allowed to select only
  create user UserSelectOnly...;
  
  -This user will have select and insert privileges
  create user UserSelectAndInsert...;
  
  -This user only contains data
  create user BaseDB...;
  
  -creation of test in BaseDB data
  create the table tdTest (...);
  
  -definition of role in BaseDB for right to select
  create the role RoleSelectOnly;
  
  -granting SELECT privilege for RoleSelectOnly
  Grant select on tdTest to RoleSelectOnly;
  
  -select grant (role) to the user UserSelectOnly
  grant RoleSelectOnly to UserSelectOnly;
  
  -definition of role in BaseDB to select and insert privileges
  create the role RoleSelectAndInsert;
  
  -grant select and insert privilege for RoleSelectAndInsert
  Grant select, insert on tdTest to RoleSelectAndInsert;
  
  -grant select and insert (role) to the user UserSelectAndInsert
  grant RoleSelectAndInsert to UserSelectAndInsert;
  
  My problem is that the definition of user (BaseDB) works as a database.
  Are there more effective ways in Oracle 10 g Express?
  
  Thank you
  Wilfried

  Hello Wilfried and welcome to the forum.

  First of all, it's a property that you have given time to review the security of the database.

  My immediate comments:

  You have 3 users:

  -This user only contains data
  create user BaseDB...;

  Very well, good thing. Use an administrative account/data owner.
  You might consider locking when you do not have administrative tasks in the schema.

  -This user will be allowed to select only
  create user UserSelectOnly...;

  -This user will have select and insert privileges
  create user UserSelectAndInsert...;

  OK, but no need to take account of their privileges in the names. You could simply call their

  SomeUser
  AnotherUser

  You have two roles

  -definition of role in BaseDB for right to select
  create the role RoleSelectOnly;

  -definition of role in BaseDB to select and insert privileges
  create the role RoleSelectAndInsert;

  Seems ok, it's a good thing here for the description of privileges in the role itself.

  Maybe I would call them something like
  RoleSelect or RoleRead or BaseDBSelectRole
  RoleInsert or RoleWrite or BaseDBUpdateRole

  Should be updated (and DELETE), as well?

  Another approach would be to separate between the tables.

  For a group of tables, select, insert, update, delete are granted to a role.

  For another group of tables, different privileges are granted to another role.

  That is, there is no general answer, correct, it depends on your application.

  Often the roles are used for ease of maintenance. In other words, if you have several users who need
  the same set of privilege, these are maintained by a role.

  Maybe you don't want to use roles, but I like them.
  But attention not only

  Select on all tables to a single role
  Insert on every table to another role
  Update on all tables to a third party role.

  Unless, of course, it gives meaning to your scenario.

  My problem is that the definition of user (BaseDB) works as a database.
  Are there more effective ways in Oracle 10 g Express?

  Not sure what you mean. Schema in Oracle and user are often used for the same thing.

  In your case, BaseDB is the owner of (all) the tables, no problem.
  As mentioned, you might choose to block the account.

  The main thing is, no application, or ad-hoc user should log in as BaseDB

  And the users of your system should be exactly the privileges they need to do their jobs
  nothing more, nothing less.

  Concerning
  Peter

• How to generate the display of mobile list with data of the user

  I try to develop a simple mobile application (mobile jquery) in Dreamweaver.

  I want to create a list of names of people from entering information via a form.

  The list would then be based on criteria that is last name or Department

  This require additional database programming or it is part of jquery mobile?

  I know it sounds simple, but I'm not a programmer, so I'm just my feet wet here.

  Thank you

  DW has no capability of database currently.  If you do programming server side with PHP and MySQL, there are commercial extensions, you can buy separately from the Web help and area of DMX.  But it's all depends on you how to work with data MySQL & PHP.  Development of applications for mobile devices is still a different learning curve.  I think DMX Zone has some extensions to help with that as well.

  http://www.DMXzone.com/go/32214/mobile-app-development/

  Nancy O.

• Re-import table data dictionary

  Hello

  I recently created a relational model with more than 2000 paintings by importing the data from the data dictionary. Unfortunately, I left out a few tables when I originally created the template. How can I add the tables after the fact? I tried to go through the process of reimportation again, but it doesn't seem like it adds tables. Thank you!

  Hello

  Are there any error messages in the log file?  (This is normally datamodeler.log file in the datamodeler\datamodeler\log folder, unless you set a different location on the environment/log preferences page.)

  Note that if you want to update the properties of Java, the updated file is different for the version 4.0.0.833 Data Modeler.  AddVMOption reports should be updated in the product.conf file and not in the datamodeler64.conf file. Assuming you are on Windows 7, you should be able to find the product.conf file in the file C:\Users\\AppData\Roaming\Oracle SQL Developer Data Modeler\4.0.0.833.

  David

• Problem importing same data in 2 databases

  Hello
  
  Oracle Version: 11G r2
  
  I have installed oracle 11g and created a database db1. I created tablespace tbl1, usr1, granted users permission and receipt of oracle data imported with the impdp command.
  Now, I want to import the discharge even into a different database. I created a new db2 database. But the discharge requires tablespace name as tbl1 and username as usr1 signal.
  
  How to import the dump in this new db2.
  
  FYI - I tried a few things. I created db2. Connected using sqlplus system/pwd@db2 command. Created a new tablespace tbl1 and users usr1. I was able to create successfully without errors as "existing". But when I run the impdp command, I get "table is already" for all tables in the dump. :(
  
  Please tell me how to do this.
  
  Thank you
  Laurence

  Hello
  This makes no sense - you create a new tablespace and a new db2 user - at this stage no table exists. You run impdp and it throws errors saying tables already exists?

  You must load it in the fake database?

  Kind regards
  Harry

• IMP on a full dump but a single importation of data

  Dear Experts,
  
  When I import the successful dump, I drop the existing schema ' SQL > drop user username cascade; "and import the dump by"system impdp... ". ". I would like to import an image to an existing instance but only the import of data and let the current and other packages metadata intact and unchanged on the instance of the existing said.
  
  1. do I need to abandon the user prior to importation if my demands are foregoing?
  
  2. If I have to drop the user, what should be the script.
  
  3. for the import itself, should what settings I use?
  
  4. What are the necessary things, I need to take into account before doing the import.
  
  Your help and advice is greatly appreciated.
  
  ARO
  Hades

  TheHades0210 wrote:
  Hello

  Thank you for the answers.

  My concern is the data in the dump are updated but not the metadata from the destination instance is use for development, metadata are updated but not the data.

  Is there a way where I can update the data on the said instance without changing its metadata?

  Thank you for your time.

  Kind regards
  Hades

  I already mentioned to use with the 'CONTENT' option, see below. It will be important that data with the option of "DATA_ONLY".

  $impdp help=y
  
  Import: Release 11.2.0.2.0 - Production on Fri Feb 15 01:46:43 2013
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  .....
  
  "CONTENT"
  Specifies data to load.
  Valid keywords are: [ALL], DATA_ONLY and METADATA_ONLY.
  

• Import Excel data into Form Designer

  I developed a dynamic form in Livecycle designer that will be sent to hundreds of schools throughout Nebraska.  There is a table in this form that has buttons to add or remove a line while dependent students informtion can be entered in this table. How I shape now works perfect for most schools, however; with the largest schools that will enter in over 200 different lines of information, it will be a long unessarily task.  Most of these schools already have the information that we solicit in an Excel file.  Is it possible for an end user of this form, using the adobe reader software to import excel data into the table?

  -Susann Wenzel

  It is possible, but you will find may be more difficult than what it's worth.

  1. you must manipulate the worksheet to make it look like a DB

  2. you must set up an ODBC connection on the system running the form and the worksheet...

  3. you would have to change to point to the worksheet from the definition

  4. you wish Reader the form using LiveCYcle Reader Extensions to allow the ODBC connection occurs in the drive.

  Paul

• Import the data file into the system of 9

  We find very cumbersome to import external data into intelligence reports 8.2. At the time that we get things trimmed and formatted, and all datatypes paired is unmanageable on any scale. We wondered if the file, import, capacity of data file still exists in the system 9 and if it improved?

  Yes, there still are even in 11.x and is pretty much the same functionality.

  I don't know which version support allows you to refresh data imported through the Process method.

  With the help of imported data files are quick solutions for the integration of data from office with the company data. However, it is not ideal and easily deployed in a business model and will not work if your users use the iHTML customer.

  Hope this is useful

  Wayne Van Sluys
  TopDown Consulting

• Loading videos photos with date information incorrectly (1970-1-1)

  A day after the update my version of osx from Yosemite to El Capitan, when I import pictures from my camera, I find that the images are imported with the correct date information while the videos are not. I check the date of editing these videos which is correct, so I think that this problem has nothing to do with my camera.  Everything works fine when I use Yosemite also turns out at this point. So, how can I know it?

  The problem is, that the photos have EXIF tags with the date of capture, but the videos do not have this EXIF tag.

  Photos uses instead the creation date of the file.

  Use the command "Image > adjust date and time" in photos to change the date of your videos to the date of change.  This workaround is a lot of extra work, but right now there is no help for it.

  You can send comments to the bug report to Apple, that the creation date of the file is lost during import.  Comments - Photos - Apple

  Using iCloud photo library?  I saw the creation date changes when videos are synchronized with iCloud.

• import excel data to labVIEW, filtering and exporting to Excel

  LabVIEW dear specialists,

  I have about 2500 data each for acceleration and force stored in two excel columns of the worksheet as well as time data in another column. My problem is to purify my data of noise so I could generate thin sinusoidal signals for my thesis. I'm still new to labVIEW and I would like to ask for help to import my data from labVIEW, filter and exporting to Excel. Please help me. I enclose my data below. Thank you very much.

  froebaruch

  Hello!

  These could be good starting points:

  http://www.NI.com/analysis/Excel.htm

  https://decibel.NI.com/content/docs/doc-8226

  A few examples delivered with Labview, too.

  Kind regards

  Marco