User profile absent on the start screen.

Original title: Windows 7 lost profile

Nice day

I have 2 profiles on my laptop and start I see only one profile since this morning.

I did not a startup repair as the hard drive is encrypted and will take at least 8 hours for the decryption.

I see all my documents always there but I need the use of the missing profile because it is the main profile.

Any ideas on the way, I will be able to connect to this profile?

Thank you

Hi Margot

Thank you for your reply and your help.

I managed to recover the profile.

There was a registry issue and have edited on this profile and the laptop has been works well for a little more than a day now.

Thank you once again.

Tags: Windows

Similar Questions

  • How can I change the name to the left of the profile picture on the start page of Windows 8?

    I just upgraded my PC Windows 7 to 8 Pro. In the start screen, I changed the profile picture on the top right corner, but the name of the left is not a mine or a name that I have attached to my PC. My PC has my correct name including my Microsoft account. How can I change the name? It appears also as a residential group name.

    Hello

    Thanks for posting in the Forum the Microsoft community.

    I understand from your description you want to change the name of the profile picture.

    Check the following site for the image:

    Control Panel > user account > manage user account > change account name

    Hope the above information is helpful. If you have any question back to us, we are happy to help you.

    Thank you.

  • User profile service: when I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.

    When I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.

    Isn't that one profile, the administrator and another account are ok

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947215#letmefixit

    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • Some applications Windows 8 will not be open and constantly return to the start screen

    Some Windows 8 applications (calendar, Photos, Messenger, etc.) do not open and return to the start screen. I updated the computer, so the apps worked during this session.  However, after that I disconnected and re-connected to the laptop the next day, the same apps stopped working again.  This continues that occur on a regular basis.  How to solve definitively the problem?

    Note: I noticed that others have this same problem, and I tried the troubleshooting suggestions (i.e., to download the troubleshooter of the modern user interface, cache cleanup, etc.), but none of these suggestions has definitely solved the problem.  I bought my new laptop two months ago and have been facing this problem since.  I want a permanent solution.

     
    W8 comes with built in AV from Microsoft (Windows Defender) solution. You do
    not actually need a third party.
     
     
    Barb
     
    MVP - Windows/entertainment and connected home
     
     
    Please mark as answer if that answers your question
     
     
     
     
  • Unable to see the Internet Explorer icon on the start screen

    Original title: Internet Explorer 8

    I did a cover a couple of days. Once this was done, I tried to install IE8.1 which failed due to 185 Microsoft Updates that must be filled. I allowed the updates to install, and now the IE icon is not in the bar of tools or even included in the applications.

    I tried and tried to reinstall IE8 or even version 8.1 which will not download. I have not physically installed Microsoft 10.

    I also welcomed the firewall off which did not help.

    Can someone give me some good advice on how to reinstall IE8?

    Thank you

    Hello

    Thanks for posting your query on the Microsoft Community.

    According to the description, you can not see the Internet Explorer icon on your desktop and on the start screen.

    I would like to inform you that Internet Explorer 10 is the default browser with Windows 8. And you would not be able to upgrade to Internet Explorer 8.

    For Internet Explorer App I suggest you follow the method below and check if that helps:

    Method 1:Follow the steps:

    1. press the Windows key + W key

    2. type set your default programs and press ENTER.

    3. Select Internet Explorer, then click on set this program as default.

    4. the modern mosaic user Internet Explorer interface should be back:

    If the problem persists, try Method 2,

    Method 2: Follow the steps

    1. press the windows key

    2. type of Internet Explorer.

    3. right click on Internet Explorer:

    4. Select Pin to Start.

    If the issue is not resolved, try Method 3,

    Method 3:

    I suggest you follow the steps below to set Internet Explorer in the desktop.

    (a) open the C drive, where the system files are stored.

    (b) open the Program folder files,.

    (c) now open Internet Explorer folder.

    (d) right click on iexplorer.exe and select Create a shortcut on the desktop.

    Please follow the steps below on pin of Internet Explorer in the taskbar.

    (e) where open C drive system files are backed up.

    (f) open the Program folder files,.

    (g) now open Internet Explorer folder.

    (h) right click on iexplorer.exe and Pin to the taskbar.

    Note: If you use Windows 8 64-bit the iexplorer.exe is located in the folder Program files (x 86).

    Hope the helps of information. If you need assistance, please feel free to post. We are here to help.

  • Cannot pin a website to the start screen

    I am trying to add a website to the W-8 splash screen. When I right (or left) click on the page, I don't see a "Pin To Start" icon or choice any where.  Any browser that I use. I looking in the wrong place?

    Hi mflx.

    See if it works:

    • Launch of the version of Windows Internet Explorer user interface
    • Go to the page you want to pin to the start screen
    • Right-click on a 'free' of the page area
      At the bottom of the page, you will see several "buttons", including an a PIN
    • Click this PIN and select Pin to Start

    Hope this helps

    See you soon

    LZ.

  • Journ.e Touch suspended on the start screen

    My Journ.e Touch just doesn't start. She is new and fully charged (about a month, rarely used). When I turn on the Tablet, it does not start the operating system, it can stay on the start screen for hours, or until the battery is flat. I can't stop, and even make the reset does not solve the problem. It worked fine before, also, today I managed to once, but now - nothing...
    What can I do?
    Thank you in advance.

    Hello thomas.b,

    You should do a firmware update to version E1.1.00.

    After that, the problem should be solved.

    How to, and a link where you can download the update here:
    http://APS2.toshiba-tro.de/KB0/OPT0502VS0000R01.htm

    Best regards

  • S90 stuck to the start screen

    My S90 is stuck at the start-up screen. It shows the screen of stand for hours now. If I change the switch it will not swtich off the phone, but it restart again to the start screen. What should I do with it?

    I felt that I could let it run out of battery, but I don't know how the phone can operate on a screen for single cabin with just the lenovo on-screen log. Also don't know if once I reboot it wouldn't have the same problem.

    Any advice how to fix this?


  • I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

    I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

    Replace your hard drive.

    You have a backup of trust? If not, buy a disc of exterrnal for that as well.

    The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

  • The Cliq is stuck on the start screen.

    Hey guys, after a normal day of use with my Cliq from 07:00 I got around 17:00 and put it on the charger, as it was almost dead, I went to charge less than an hour with it and now it is stuck on the start screen of Motorola with the small black bar on the left. I charge my phone all night every night and do not use it much at all, but it lasts and I wasn't there to look at what had happened, so I don't know if there was any discrepancy prior software other than seeds from basic mentioned by others.

    Charles, you are still able to boot into Recovery Mode and learn the triangle with the exclamation point? If you can, press the keys ALT and L at the same time to access the Recovery Menu.

  • Enter the Recovery manager from the start screen

    My HP dv7-4296nr laptop, I have an included recovery partition. But I can't access Recovery Manager in the start screen by pressing F11, when I pussed, it starts only to Windows normally, although in the lower left conner, it displays "F11."... System Recovery '. Only when I activate the recovery partition and restart, I can get into the Recovery Manager. Could someone told me what I have to do to fix this?

    Hello

    Before trying the suggestion below, make sure that you have backed up all your personal files, etc.

    If you created your set of recovery DVDs, you can use them to reinstall the operating system that this process will also recreate the recovery Partition and so I hope to see the f11 feature.

    Kind regards

    DP - K

  • The icons on my desktop page always returned to the left of the start screen.

    The icons on my desktop page always returned to the left of the start screen. I have to uncheck the "align icons on the grid. Any ideas why & how can arange the icons as I want! Do not know if by chance, but it started after I recently had to reinstall MS Essentials

    Hello

    I suggest you to follow the steps and check if it helps.

    a. right click on the desktop.

    b. choose 'Customize'.

    c. on the left side of the Control Panel, click on "Change desktop icons"

    d. uncheck "allow themes to change desktop icons."

    See also:

    Show or hide common icons on the desktop

    http://Windows.Microsoft.com/en-us/Windows7/show-or-hide-common-icons-on-the-desktop

    The desktop (overview)

    http://Windows.Microsoft.com/en-us/Windows7/the-desktop-overview

    I hope this helps.

  • Error when you try to connect to the account of user: the user profile service failed the lied/user cannot load profile

    Im trying to connect to my own acc on my computer, but it says 'the user profile service failed the lied/user cannot load profile' im using an accout comments I had set up for my sister and that I keep reciving a message saying that Windows Explorer as stoped working so I can't open any doc.music. pictures or whatever it is im in internet using foxfire that I installed it on another acc please help I don't know how to connect to m trying to connect to my own acc on my computer, but it says 'the user profile service failed the lied/user cannot load profile' im using an accout comments I had set up for my sister and that I keep reciving one message saying that stoped working so I can't open Windows Explorer all doc.music. pictures or whatever it is im in internet using foxfire that I installed it on another acc please help I don't know how to connect to my admin accmy admin acc

    Hello

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
    Mode has no default password (unless someone has changed the password so it should be available).

    Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
    has been known to cause this problem.

    Error message when you log on a Windows Vista-based or Windows 7 using computer a
    Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been connected with a
    temporary profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the Admin account hidden from the prompt by if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
    always leave to an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

  • Red shadow on the entered words and contours, also red dots on the start screen

    I'm getting red shadows on the words entered as well as on the edges of the boxes. There are also red dots on the start screen. I tried to re start but that did not work. So what is next.

    Hi dbuffalolam,

    1. don't you make changes before the show?

    Try these steps and check the result.
    Step 1: Virus scanner online to clean your system.
    a. visit http://onecare.live.com/site/en-us/center/whatsnew.htm
    b. click full service scan and complete the scan.

    Step 2: Check if a non-Microsoft program is causing this issue
    a. open the article: http://support.microsoft.com/kb/929135
    b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
    c. check to see if the problem persists.
    d. If the problem does not persist in the boot, it means that another non-Microsoft program is causing the problem.
    e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
    f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
    g. Article, follow "step 7: reset the computer to start as usual.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • HP MS235 pavilion in a single reboot after the start screen guard

    Hi all.

    can anyone help wih this problem I have with my computer hp pavilion MS235 that keeps just reboot after the splash screen.

    What happens is that the system began to hang at start up. It would take about an hour to get to the Welcome screen. could not do anything even not to make a recovery, so I put the drive in another machine and he made a new installation. but since then it just keeps restarting to the start screen. I ran all kinds chech af, but nothing works.  I'm on win 7 x 64.

    Please can someone help! Thank you.

    Concerning

    Dave.

    Start at this page: http://support.hp.com/us-en/document/bph07143

    Or here: http://www.computersurgeons.com/SearchProducts.aspx?sbt=pavilion%20MS235&bkm=Results#Results

Maybe you are looking for

  • Portege R500 has a microphone?

    Hello The range R500 has it built in microphone?

  • Pro Evolution Soccer 2010 falls down when I'm trying to load a save game (runtime error!)

    When I'm trying to load a backup game Pes 2010, the game crashes with the following message: Microsoft Visual C++ Runtime LibraryRuntime error!Program:D:\Games\Pes2010\pes2010.exe This application has requested the execution to terminate in an unusua

  • HP 4500 not scan AGAIN!

    So my whe scanned 4500 hp I first set it up, and then quit.  Then I had to uninstall and reinstall the software and it worked.  Now some time has passed, and he left new scan.  I called HP and after a bunch of them staring at my computer (Mac), they

  • 3050: HP 61 cartridge black

    I have a new cartridge 61 which does not recognize the printer. How can I get a replacement?

  • Scan on HP Photosmart 6510, all-in-one

    The analysis on the computer menu disappeared during the click on the printer icon.  I saw a post on this for HP Officejet 8600, which was solved by reloading the software.  There was something about an update of the software.  So must the software d