User profile could not be saved in

Similar Questions

• Unable to get the administrator account, receive the error such as the user profile service failed logon. User profile could not be loaded. "

  Original title: "the user profile service has no logon. User profile could not be loaded"and admin password will not work

  I had this problem came several times before but it always correct itself without any intervention from myself. Now, even after restarting the computer several times I can not directly connect to my main Administrator profile. I have another profile without administrative privileges already done so I could at least use my computer, but only with limited permissions. When I try to do something to solve the problem, as the registry change, I'm prompted to enter the administrator password. I enter the password and the alert box goes, and nothing happens. Enter the password seems doing nothing, except the aknowledge the password is correct (it warns me when I entered a wrong password so I know it's no doubt receiving data). DOoes anyone know how to fix this? The computer works relatively well recently and have no idea of what decoration could have happened to cause such a mistake that bothers.

  Hello

  This worked for me, try allowing the default Administrator account, the steps are in the following link
  http://somanytips.com/Windows-Vista7-the-user-profile-service-failed-the-logon-user-profile-cannot-be-loaded/
  I hope this will help!

• User profiles will not be saved

  My PC will not save a user's profile.

  Every time I turn it on, I get a message saying that I need to use a temporary profile and my changes

  will be lost when that I disconnect.

  How can I control my profile again?

  My PC will not save a user's profile.

  Every time I turn it on, I get a message saying that I need to use a temporary profile and my changes

  will be lost when that I disconnect.

  How can I control my profile again?

  Hello

  How many times this happen and in what circumstances?

  It would be a good idea to run the System File Checker tool:

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If SFC detects serious flaws, you may need to perform a repair upgrade Installation.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ________________________________________________________

  This is a temporary profile information, etc.:

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  And that's when a Temp profile is loaded.

  "A temporary profile is loaded after you connect to a Windows Vista-based system.

  http://support.Microsoft.com/kb/947242

  And how to fix a corrupted user profile:

  "Fix a corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  See you soon

• error message «...» Service user profile Service has not logon. User profile could not be loaded"windows will not start

  I can't get windows vista to start, because the user profile seems to be corrupted. I tried to start in safe mode to no avail mode. the system recognizes my name and graphic symbol, but does not progress beyond the error message.

  Help, please

  I can't get windows vista to start, because the user profile seems to be corrupted. I tried to start in safe mode to no avail mode. the system recognizes my name and graphic symbol, but does not progress beyond the error message.

  Help, please

  Please use this tutorial:
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

• User profile could not be loaded__

  When I try to open a session my laptop it tells me that my user profile cannot be loaded.  I am now in safe mode, but I don't know what to do now.  Should I try to make a new user?

  Help... This is my work computer and it's the end of the year with a lot of information about this and I'm not 100% sure that my MOZY backup works correctly.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• I get the message "the user profile Service has no logon. User profile could not be found. How?

  Compaq Presario CQ3160D desktop PC

  Windows 7 Home Basic 32

  When I connect to the correct password, the message "the service user profile Service has no logon. Profile of user was not found. "That message was met on the morning of 12/07/2011 from. I remembered that as I logged on the night of 12/06/2011, I had to wait 1 1 update. After this 1 update, things have changed. How to solve this?

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon (if ideally 12/05/2011 or before) and then do the restore.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• "User profile could not be loaded" on Compaq 6710 computer b laptop Vista Business runningng

  I came home from a 2 week stay to find that I couldn't connect to my laptop. At the time I was absent the laptop was turned off. When I enter the password to logon I get: "the user profile Service service has no logon. User profile cannot be loaded. "message. I tried to turn on the laptop for 3 hours, then tried to log in again, but without success. How to do this? Really would appreciate the help. Stephen

  Hello Stephen,

  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If Windows loads in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose the restore point you earlier and then do the restore.  When you are finished, Windows will restart normally.

  Kind regards

  DP - K

• How can I get my account? "the user profile service could not connect..." User profile can not be downloaded... »

  I can't access my account... message says: "the user profile service could not connect..."  User profile can not be downloaded... »

  Help, please...

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• User profile does not load correctly, the user could not be connected.

  I tried to login to my account to administrator with my correct password and it says "user profile can be connected, user profile does not load correctly ' or something to that effect. Even when I login as a guest and enter my admin password on the user accounts settings and click ok, it won't let me access or modify accounts. Please help me, I am not able to access one of my documents or pictures of my guest account.

  ·                         Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• C:\Users\Taufiq\AppData\Local\Temp could not be saved, because you cannot change the contents of this folder.

  When downloading, I had met following problem please solve this problem.

  HI Maria,

  I would be grateful if you could answer the following questions to guide you in the right direction:

  1. what program or application you are trying to download?

  2 is the issue limited to specific application?

  3 have there been recent changes made on the computer before the show?

  You can run the next fixit and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled

  See the suggestions provided by Karena R 12 March 2011 and check.

  http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/cwindowstemp-could-not-be-saved-because-you-cannot/2814213c-204c-e011-8dfc-68b599b31bf5?msgId=dd7abbc2-2b4c-424b-9110-8008b02ae3d8

  Please post back with the results and we will be happy to help you further.

• I can't get Firefox on my MacBookPro, my user profile is not available. Help!

  I got a message at the bottom of my screen telling me that my navigation could be faster if I "refreshed" Firefox, so I refreshed. I lost my favorites and a few other things (I forgot it would happen) and the thought restart my MacBookPro could receive a "restart". When it was time for Firefox restart, it said that I had two profiles, so I chose one of them... apparently not the right one. Firefox wouldn't load or install, and now I don't have it at all. I tried to uninstall Firefox (moving icons to the trash) and all over again with a brand new installation, as a new customer, but... now it says my user profile is not accessible and cannot be found. I dug this file to the trash and put it back on the desktop, but apparently it does not either. I don't know what to do. I NEED Firefox for my browser, even if I didn't have a bookmarks etc. I can redo those, find a new etc. I don't like using Safari, I miss my Firefox like crazy. ANY help or advice on how I can get back Firefox would be greatly appreciated! Thanks, Katy

  You must locate the profiles.ini file or use the Profile Manager to create a new profile.

  See:

  • https://support.Mozilla.org/KB/how-run-Firefox-when-profile-missing-inaccessible

  This is usually caused by a problem with the file profiles.ini.

  You can use one of them to reuse an existing profile or create a new default profile for Firefox:

  • Remove the profiles.ini file to force Firefox to create a new default profile
  • Use the Profile Manager to create a new profile
    If you still have an existing profile, and then click "Choose a folder" in the MP and select the location of a lost profile and recover this profile.

  You should find the file profiles.ini in this hidden place:

  • Windows: %AppData%\Mozilla\Firefox\
    * C:\Users\ < user > \AppData\Roaming\Mozilla\Firefox\
  • Mac: ~/Library/Application Support/Firefox /.
  • Linux: ~/.mozilla/firefox/

  If the file profiles.ini compensation does not work then also check the location of the cache files.

  • Windows: * C:\Users\ < user > < profile > \AppData\Local\Mozilla\Firefox\Profiles\.
  • Mac: ~/Library/Caches/Firefox/Profiles/
  • Linux:~/.cache/Mozilla/Firefox/
  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• When trying to update, I received this message: Firefox 3.6.3 (2).dmg.part could not be saved, because the source file could not be read.

  When trying to download an update, I got all first: "there was any problems searching, download or installation of this update. "Firefox could not be updated because: no data has been received (please try again)" he also gave a link to download manually. When I tried the site in Firefox, I got: 3.6.3 (2).dmg.part /Users/(deleted for privacy)/Desktop/Firefox could not be saved, because the source file could not be read.

  Try again later or contact the server administrator. I tried this 3 times.

  This has happened

  Don't know how many times

  Is around 11:00 central time Mon, 17 May 2010

  This means that the file cannot read because he was interrupted while downloading. Try to download again

• This Web page could not be saved.

  Lately, I noticed that I could record is no longer a webpage via Internet Explorer 7. I thought it had something to do with the release of the new version, IE 8. Finally, I installed IE 8, thinking that the problem could be solved, but whenever I try to save a Web page, still appears the message "this Web page could not be saved.". I also remember that it used to be something like "this webpage could not be saved because one of the files is missing" or similar, when I still had IE 7. I tried to save .mhtml using another browser, and there was no problem.

  What could be the problem then? If my computer has been infected by a virus/malware, etc.? Or only what setting I need to change (but I doubt it)?

  How can I solve this problem? (I really prefer IE 7 or 8 on other browsers).

  Help me please... Thanks ^_^

  Hello D30.

  Thanks for posting your question on the Microsoft answers Forum.

  (1) uninstall IE8 since you were still presenting the same issue with IE7.

  (2) check if you have active modules. If you do, then try with disabled modules.
  Go to IE, click on tools, then click on Manage Add-ons, this will show if the modules are on or off. To temporarily disable all add-ons:
  Click the Start button, click principally made programs, accessories, click System Tools, and then click Internet Explorer (No Add-ons).

  (3) If you are still not able to save, you have User Account Control (UAC) turned on?
  If you disable UAC, you are able to save a web page?
  To disable UAC, go to start, Control Panel, Security Center, choose other security settings.
  Expand the arrow to the right and you see the user account control. If it is selected, clear and
  try to save a page again.

  4) go in Mode safe mode with networking and see if you can save a page. If Yes, then another program or software is interfering and not allowing you to save a page IE.

  -Restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when you see the boot menu.
  -When the Windows Advanced Options menu appears, select Safe Mode, and then press ENTER.
  -Log on to Windows by using the administrator account or any account of a user with administrator privileges.

  NOTE: In Safe Mode, your display system and the Bureau will look and perform differently than in Normal Mode. This is only temporary. To return the system to Normal mode, we can simply restart the computer.

  If please reply back and let us know if these measures have helped with your question or if you need further assistance.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• abuse of user profile is not the opening of session

  I must have deleted or damaged my profiles from user accounts in error and now I cannot create new accounts, but cannot log on to them.
  I got the error msg ' user profile services doesn't have the logon - user profile can not beloaded.
  I have an administrator account which is the only one who opens a session.
  I tried to solve the problem by the following methods 1 & 3 of article KB 947215 Microsoft, but without success.
  Method 2 has not been possible, because I could not log into the new account that I had created, and it was also nowhere in my files or system even after using the search option.
  There, anyone know how I can fix this and be able to log on the new accounts.
  Is it possible to copy from another computer user profiles and paste them into my account?
  Thank you.

  Hello

  Try these steps

  that article KB 947215 is also included if you missed something

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• The user profile does not properly

  Turning on my computer these days, I get a message that says:

  Your user profile was not loaded correctly: you have been logged on with a temporary profile, the changes you make to this profile will be lost when disconnected. Please see the the event log for more information or contact your administrator.

  I have Windows vista, SP2 on my toshiba computer

  I'm not the most computer intelligent person, but in this case everything that has been saved on my computer such as photos, music, etc. is not on the computer. Anyone have suggestions on what to do or try on this message.

  Thank you

  Toshibasheila

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  These problems and similar bugs can help:

  A temporary profile is loaded after you connect to a Windows Vista-based system
  http://support.Microsoft.com/kb/947242

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  -----------------------------------------------

  Try these to erase corruption in the case where it plays a role.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Other methods:

  Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then go back
  and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the same for others
  accounts that may be difficult. If necessary you can also reset your password in the accounts.
  Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.