HP Jet 11-r000na: stream HP 11-r000na microSD card

What type of MicroSD cards are compatible with the new workflow 11 and what size?

Hello Jonesy567,

According to the fast flow 11 card, it supports SD/SDHC/SDXC.

Micro SD SDHC cards are generally 4-32GB and SDXC are much more important. I think that the most important, that you can buy occupies approximately 512 GB.

So it isn't a heading of size, but besides what is currently manufactured in SD cards, and as long as you use the above formats, then it will be compatible with the flow of 11.

I hope this helps!

Kind regards

Phil

Tags: Notebooks

Similar Questions

  • stream HP 11: micro sd card

    What is the maximum size micro sd card I use in my stream 11 laptops with windows 10 hp.

    Hello @jackpeters777,

    Thanks for the quick response!

    As long as it is a microSD, the laptop it should support.  The laptop should recognize any size is the microSD card.  I hope this helps.

    Kind regards!

  • HP Jet 11-r000na portable 32G: my laptop says "plugged in, not charging" what should I do to fix?

    My laptop says "plugged in, not charging" and 0% butter so when I plugged the charger it stops immediately. What can I do to fix it myself? I would really appreciate the help.

    Dear customer,

    Welcome and thanks for posting your query on the Forum from the HP Support

    It seems that your laptop is not charging the battery, we will surely help you this question

    Please run illustrated steps below to solve the problem:

    Step 01. Click the Start button

    Step 02. Type "Device Manager" in the search box of start and open the Device Manager

    Step 03. Get piles and expand it by clicking on the symbol to the left.

    Step 04. Right click on "Microsoft ACPI Control method battery compatible" & uninstall

    Note: This driver battery is re - install automatically when you restart the laptop

    Step 05. Shut down the laptop

    Step 06. Please, remove the battery and unplug the AC adapter

    Step 07. Press and hold the full power 1 minute button

    Step 08. Go ahead and replace the battery and plug the power adapter

    Step 09. Search for "Load connected" message on the battery icon

    After completing all the steps, if you are facing the same question again, please do more than three steps:

    1 perform a check of the battery in HP Support Assistant [install the software, if this is not available]

    Note: Replace the battery if check the health watch replace

    2 update the latest BIOS for your laptop on the Site of HP Support

    3. Please check your laptop with a well known adapter & different from a notebook battery

    Note: If a known good battery also in charge isn't, we need to replace the motherboard

    How to improve the life of a battery:

    Power management must be set correctly for the extended battery life

    Please keep the brightness of the screen to the lower level

    Please turn off the Wi - Fi Connection when not in service

    Please remove the disc from the optical drive when not in use

    Test and calibrate the battery (Windows 8)

    http://support.HP.com/us-en/document/c03325217

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the white button on the right to say thank you Thumbs Up *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

  • HP Jet 11-r010nr: stream hp 11 does not startup, the led next to the button / stop is on

    I have a friend who brought me their 11 2 weeks older HP flow because all day yesterday they tried to restart the laptop and may not have to start at all.  I tried the famous hard reset by holding down the power button for 8-10 seconds of course which is suggested (I have it pressed for a good 40-50 seconds).  I also now tried the power button and the mute for 40-50 seconds.  No luck.

    Unfortunately, the battery is good behaviour and because he is still under the manufacturer's warranty, I can't remove the back and turn off the battery in this way.  (Can I ask what is the point to make the inaccessible battery that the mere fact that you earn more money by forcing people to return the product to HP to avoid the cancellation of the warranty?  Apple does it too well, please do not follow their trend!  I love HP, but this is going to force me to buy elsewhere!)

    Can someone help me or point me in the right direction to help with this?

    The light next to the power button is on and the light on the projection side, it is turned is on but the screen is black with no cursor.  It has been unplugged for 3 hours in the hope, the battery is going to die and I can get somewhere with him but I'm not sure how close it is exactly to be dead.

    She becomes very frustrated by that and I don't blame him.  She's at the point where she will return it and switch sellers totally if it can't be fixed.

    The battery is eventually died.  I plugged in the charger and Windows restarted without problems.  Research in the logs to see what happened, I noticed that it didn't have an update for Windows 10.

    My guess is for some reason any it failed but the laptop supposed it was finished, restart it it basically says "wait, what am I I loading?" and froze.

    Needless to say, I downloaded the update from Windows 10 and installed successfully.  I restarted the laptop and now everything is fine!

  • Laptop HP Stream - 11-d010wm: having to check the compatibility of a MicroSD card with my data flow specifications before buying the card

    A SanDisk Ultra 16 GB UHS-I/class 10 Micro SDHC memory is not compatible with a laptop HP of Stream - 11-d010wm (ENERGY STAR)?  I have a couple of Micro SD cards, but they are getting older and being not recognized when I put them in the card slot reader, so I guess that they are not compatible.  I'm looking to buy a new SD card, but not to run into the same problem, so want to check compatibility before you buy... any help would be appreciated.  Thank you.

    You can also consult the many Amazon comments and answered questions for the 11 waterways, as some say the real SD card they bought (although most seem to just mention 'micro SD' so I really think that everything you buy is going to work).  I can't explain why the 2 you have now are not unless they received a different kind of formatting.

    Ah wait however, this review has reported problems with the three different SanDisk class 10 cards, maybe you can search through the comments and find some that work.

  • Office Jet 8620: cannot use the 3 USB sd card reader

    trying to hook up a generic USB 3 SD card reader to the USB port of the printer, but it does not identify all the photos on the SD card. Is there a way around this problem?  IM surprised this printer only has as basic thing as a reader of SD cards on this subject.

    Hi @drinternet,

    Make sure that they are formatted in Fat32, if they are not already, that should work.

    Thank you.

  • Laptop HP Stream - 13-c077nr: maximum size microSD card? flow specifications

    I just need to know the micro SD card maximum flow can take. I read - somehwhere it is 32 GB. I cannot confirm that the manual and have not found this topic through the forum search. My apologies if this question has already been answered and thanks in advance for any input.

    Hello

    It supports the "support SD/SDHC/SDXC UHS - 1", it uses the standard card reader. I have more great card (ability) to test but no problem with 64 GB.

    Kind regards.

  • Streaming audio of ROCKET (external card) for pc, has stopped working.

    Hello

    I have a v1 rocket and use only the external memory slot to store audio. In the past I could plug the "rocket" on the PC and just explore memory and listening to music. After that I updated to the latest firmware, it now wants to copy the audio data before playing. This means that I have to wait for centuries (if it is a mixture of 90 min) to hear it. This becomes a real pain if I want to flick between files. She also did navigate the most boring rocket by adding a "MASTER" folder that did not exist before. I got back to the older firmware and restore the default settings, but it still does the same thing.

    Anyone offering any insight/help would be highly appreciated.

    Cheers, J

    Neither new nor old firmware requires to copy music to your PC. That would be nuts. The problem is the music player of your computer or USB mode on the "rocket" software.

    The update of the firmware may have changed your USB mode. Go to settings system/settings/USB Mode and change it. There are actually two modes, MSC and MTP.  (Auto Detect chooses between them, often wrongly.) Try the MTP and MSC to see if you can get the old behavior.

    MSC makes your job of rocket as a basic storage drive. You drag and drop the music on it through Windows Explorer.

    PSG controlled by Windows Media Player. You send music via Windows Media Player, sync, playlists, etc.

    Looks like you were using the before PSG, but it's hard to say without knowing what type of media player on your computer.

    The pleasure is that your computer can see a USB mode at a time - each mode appears on your computer (but not the "rocket" itself) as a separate partition. If you send files through the PSG, he sees only these files. If you send them via MSC, then the connection of the PSG will not see these files. Again, this depends on how you used the "rocket" before the change of firmware. .

    If you still get the oddities, what is your music player on your computer? Try another, such as Winamp and Media Monkey.

  • 11 the stream. Must new memory cards be formatted? Brand/size

    I was thinkingj to get a PNY or Sandisk card 128 g for my 11 of flow. They are stable and do they need to be formatted? Where can I find that on my computer? In addition, the BONE, it came with are 8.1, but are they 64 or 32-bit?

    HP PC laptop flow 11 model: 11-d010nr, product number: K2L95UA #ABA, file system NTFS, Intel Celeron CPU N2840 2.16 GHz, RAM 2.00 GB, 64-bit x 64 based processor, 8.1 with Bing Windows operating system, HP USB 3.0 flash drive 128 GB, Sandisk Ultra SDHC 32 GB FAT 32 memory card

    BubuBaby wrote:

    Thank you for your response. It is a model 11 d010nr. Is it always the 64 bit pattern. I don't know why this is important, but it must be because he is asked during the validation. Usb is an excellent suggestion that it is half the price, but unfortunately I need smaller size card and still need suggestions for the latter. All of this formatting is confusing. Where can I get information on this subject? What format do I need for my computer? Why HP does not explain such things in their manual, so we don't have to go on the forums?

    Why HP says these sorts of things in their manual so we don't have to go on the forums? That would be because learning things about the operating system of your PC is your own responsibility. HP provides a practical guide that explains things in general terms. I recommend you take a couple of PC course at your local community college.

    All this formatting is confusing. Where can I get information on this subject? What format do I need for my computer? Some great resources are, it's the internet and your local public library and bookstores. Because you are using a Microsoft Windows operating system and you want to use a large capacity external storage device, NTFS (new technology file system) is the preferred format.  exFAT format is also supported by 10 and Windows 7/8/8.1. Manufacturers of memory cards also provide explanations many type of format, including why do not use certain types based on the capacity of flashcard sd media.

    Formatting the drives

    http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

    Media sd formatting

    ,-flash-drive-or-device-using-a-pc http://KB.SanDisk.com/app/answers/detail/A_ID/312/~/formatting-a-memory-card

  • Tuner KWorld V-Stream Studio TV Terminator TV Card

    Kworld Co manufacturer

    PCI VGA CARD 7131 RF product
    I can't install the 64 bit of widows 7 sp 1

    Kworld Co manufacturer

    PCI VGA CARD 7131 RF product
    I can't install the 64 bit of widows 7 sp 1

    The manufacturer supports the device under Windows 7 and that you have downloaded the drivers and the software provided for use under Windows 7 from their web page?

  • verifiable maximum MicroSD for a Stream 8

    Hello

    I searched and not found an answer.

    I was hoping that someone could tell me the sd card maximum that they have installed a stream 8 (although I suspect all 7 "& 8" HP tablets will be the same).

    I know the manual says 32 GB, but I suspect that might work 64 GB and 128 GB, but hoped someone might come back and say - yes, I have a 64 gb Samsung Evo (or other) work

    Thank you very much

    I just installed a samsung 64 GB in it with microSD card and she saw all

  • Jet 7 - back to 8.1 for Windows

    I have improved my Stream 7 to 10 Windows Tablet.  For a number of reasons, I want to go back to Windows 8. 1. Unfortunately, I ran a system cleanup to free disk space and cannot roll back to 8.1.

    I have a USB cable and OTG of recovery.  I talked a lot here to use a motor hub USB, keyboard and mouse for the restoration.  If I reload my tablet, I'll be able to run the HP recovery without all of this?  The touch screen responds?  I did not have a powered USB hub and am not really interested in buying one just for this purpose.

    Sorry if this has been discussed before.  I have been reading the forums of discussion, but did not see my issue addressed.  Thank you.

    Edit: A USB powered hub, is possible to transfer the contents of the recovery card USB MicroSD for the tablet can recover from a MicroSD card?

    Hi, Yes, fortunately Windows 8.1 for the Stream 7 recovery media charge touch screen drivers as well as a card OTG and USB recovery are required to restore the factory settings.  Fix the OTG and USB and turn on holding down the low volume button and press F9 to start options and to boot from USB.  A GUI menu appears and the touch screen works.

    About the micro SD location, the tablet will not start him so there would be a problem trying to use it.

  • The maximum capacity of the Microsd for HP Stream 13

    Hello, I need information on the maximum capacity of microsd that a HP 13 Stream can manage and read well.

    Is that the SHXC 64 GB or 128 GB SHXC microsd card can work well and compatible with it?

    Any information will be appreciated.

    Thank you!

    Sincerely,

    Linda.

    Hello

    It supports cards "SD/SDHC/SDXC with UHS-1. I have no card of 128 GB to test, but one Member said he's ok with 128GB, I know for sure 64 GB card works.

    Kind regards.

  • What is the level of the HP Jet 7 Tablet DirectX?

    Hello world!!!

    Anyone know what is the level of DirectX (or function) of the HP Jet 7 Tablet? I've looked everywhere and there is no information about it. The fact that I found is that the HP Jet 7 Tablet has an Intel HD graphics card, and that I should assume is either level 9.1 and 9.3 (if I'm lucky). I would like to know before I rush to the store to buy a.

    Any help is greatly appreciated!

    Tetai Ik

    DX 11.

  • Comm of ARMS with SPI

    That's what I have created so far.

    1 frame to set it up, I've included the specifications on details of SPI Comm below, directly from the user guide on the device.

    2nd part: drop the pin down to initiate an SPI Communication. (I found this in another answer on the forum)

    3rd part: at the same time reading / and write an 'H' in the = 48 hexadecimal ascii code to the device

    4th image: wait at least 50 microseconds.

    frame 5: read the response of two bytes

    box 6: pin CS Raise at the end of communication

    frame 7: finishing and terminate

    My problem lies in the aspects of communication, I can't do two things communicate with each other.  I'm some need help and face delays, any help will be greatly appreciated.  Regarding the conversion of data to numbers can be used, I can handle but I just need to talk.  Help, please

    Funny that you should mention the OLED I talked to a couple of application in this stream engineers and I decided to give up the IPS, which I think would be easier and I will rather use UART.  Especially because the OLED and the MicroSD card problem.  So im back to square one, thanks to you two.  I call it solved!

    -Joel

Maybe you are looking for