user profile service logon faild

Similar Questions

• Today when I tried to log in it says user profile service logon failed

  Last year, I bought an Asus laptop. Today, when I tried to connect, says he doesn't have a user profile service. I have tried everything to fix and it made it worse. Now, I think I need to reinstall my Windows 7. Problem is when I bought the laptop, that it came with the drive. What now?

  Hello

  ·         What was the last change made to the computer?

  See this article below about the error you get and follow the troubleshooting steps:

  http://support.Microsoft.com/kb/947215

  Hope this helps,

• Opening of the user profile service has not... other ways to fix it without deleting the profile?

  I get the message "user profile service logon failure." I'm not a very excitable person, and I don't know how to do all of the technical things to fix. I would try some if they do not mess up my computer, because I can't do that. I don't want to delete my profile however, because then I'd lose all my documents and other important things. Can someone help me please?

  ·                         Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon. Mick Murphy - Microsoft partner

• Satellite L750 - user profile service has no logon

  Oh Dear

  I now have an attractive thin red brick
  What to do to fix outside such scary things?

  Note the new hard disk password is ok

  + The message was edited: link has been removed.

  I guess this will help you solve your problem, because it seems to be known MS system issue:

  See article Microsoft Knowledge base:
  [You receive a "the user profile Service has no logon error message:"] http://support.Microsoft.com/kb/947215/en-us]

• Re: Satellite C660-242 - "the service user profile Service has no logon.

  By turning on the laptop the following message when you try to enter the password
  "The service user profile Service has no logon.
  "Unable to load the user profile.

  Hello

  Check http://support.microsoft.com/kb/947215 and post comments to the first Microsoft document on this issue.

• The logon user profile Service service failed

  Hello

  I have a Compaq presarion c500 c555em equipped with windows vista and for the last week, I was unable to connect. After the startup logon page appears with the only newspaper on my user profile option. When I enter my password correctly, a message appears to indicate:

  The user profile Service service has no logon. User profile cannot be loaded.

  Looking at other posts, it seems to be a fix from Microsoft to this problem. However I can't access the internet in safe mode, and when I try to run the fix from a memory stick it does not open the fix.

  If I run the F11 key, I automatically lose everything on my c drive (ie the restore to factory settings) or that it will be possible to restore for some time before this error occurred? If so, could you give simple instructions on how to make or give a cross reference to where I can find this information. My apologies so simple, but I'm really bad with computers

  Thank you very much

  Edwardo

  Here is the link that you can try as well... http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  on the same link MS it is fix it myself section as well... Here are the steps to do this...

  To fix this problem yourself, follow these steps:

  1. Delete the profile by using the computer properties dialog box. To do this, follow these steps:
  1. Click Start, right-click computer, and then click Properties.
  2. Click change settings.
  3. In the System Properties dialog box, click the Advanced tab.
  4. Under user profiles, click settings.
  5. In the user profiles dialog box, select the profile that you want to remove, clickRemove, and then click OK.
  6. Click Start, type regedit in the box Start Search and press ENTER.
  7. Locate, and then expand the following registry subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  8. Right-click the SID that you want to remove and then click Remove.
  9. Log on to the computer and create a new profile

• Log the user in the section problems - the service user profile service has no logon

  Hello

  Every time I try and log on to the laptop computer, the following message is displayed.

  "The service user profile Service has no logon.
  Unable to load the user's profile.

  other profiles can be connected without any problems.

  If you can help that would be great

  See you soon

  Check http://support.microsoft.com/kb/947215
  Maybe this can help you.

• the user profile service has no logon

  service user profile service is a not the logon user pofile cannot be loaded

  can you help me

  Thank you

  Doug

  Hi Doug,.

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 48 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  If none of the options above are successful, try to run the steps in the guide on the following link.

  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-Lo...

  Kind regards

  DP - K

• Error - "the user profile service has no logon.

  Original title - login

  When I try to log in. I get the message. The user profile service service has no logon. How can I fix it?

  Hi DonPatton

   

  1. what operating system is installed on the computer?

  2. for how long have you been faced with this problem?

   

  If you are using Windows Vista or 7 operating system installed on the computer, then you can refer to the link below and check if the steps provided assist solve you the problem-

  http://support.Microsoft.com/kb/947215

   

  I hope this helps.

• The user profile service has not logon. User profile cannot be loaded.

  This showed on my computor someday on my connection, and I am the administrator. So now I can not change anything on computor or backups or add programs or delete. I did nothing before that happened. Any help would be appreciated. I tried safe mode, but that did not solve the problem. I need a simple solution that I'm not terrible with computors. Thank you Sandy

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• HP Pavilion CPU: "user profile service service has no logon.

  The following message when I try to log in with my password "user profile service service has no logon. Please help me if I can log on. Thank you.

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  If none of the suggestions above help, try to run through the steps in the guide on the following link.

  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-Lo...

  Kind regards

  DP - K

• user profile service service failed the logon.user profile cannot be loaded

  everytime I try to log the error message above appears, as administrator of what s that keeps me from being able to try to solve

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error: "the service user profile service has no logon. Unable to load the user profile.

  Original title: can't log on...

  When I try to connect my computer at home, I get an error message that reads... "The user profile service service has no logon. User profile cannot be loaded. Can someone tell what is happening and how to fix...

  Hi, Thunderrad25,

  Are you able to get into Safe Mode?  Try a system restore.  Select a date prior to the incident happening.

  These can be useful as well-

  A temporary profile is loaded after you connect to a Windows Vista-based system

  http://support.Microsoft.com/kb/947242

  The user profile Service has not logon.  View user profile cannot be loaded.

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

• Error message: the user profile service has no logon. Profile of user was not found.

  Just after that Microsoft updates yesterday we received the following message: the user profile service has no logon.  Profile of user was not found.

  The user is locked.  I tried the system restore, but the computer does not. I don't have a disk of Vista to re - install.  Peux-I re - install online?  I have the product key.

  Thank you

  Joe R.

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are running correctly.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Error 1051: User profile Service has no logon

  Mr President.
  I use a real operating system Windows Vista Home Premium SP2 with my laptop Lenovo Y430. I have recently updated to SP1 to SP2 Windows Update online. last week when I tried to log in one of my user accounts, the above-mentioned error popped up on my screen. on further verification, I found that the "user account" does not exist in the c:\user\(account name folder). I could not find the same in the registry editor "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList".

  I've traveled all your forums to get help, including http://support.microsoft.com/kb/947215. even installed the "Microsoft Fixit" given on the same page, but it did not help. I even tried to restore my system to an earlier point.

  In addition, when I tried to stop/restart the "user profile Service", the same mistake invited each time. but when I stopped/restarted the "user profile Service" after the removal of the user of the control Panel\User account account, the system didn't invite me with the error. and then; even after the service is restarted, and then creating a new user, I was unable to login with this user account.

  now I find myself with a single administrator account to work with
  Please suggest

  Thank you in anticipation

  Hello

  Maybe this will help:

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in
  Safe mode has no default password.

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google
  Earth) has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with
  a temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.