User Session timeout

Similar Questions

• Increase the user Session timeout?

  I don't see how to do this anywhere in the documentation.  It is so simple that no comment code in bold below and replace the value in the portal file - exe.properties or is it more than that?  Is there anyway to remove the timeout so it never disconnects users unless you close the browser?  I noticed something detached with that something false about a liferay portal, but there no air as it would result in EID.

  #jdbc.default.connectionCustomizerClassName = com.liferay.portal.dao.jdbc.pool.c3p0.PortalConnectionCustomizer

  # jdbc.default.idleConnectionTestPeriod = 60

  jdbc.default.maxIdleTime = 3600

  # jdbc.default.maxPoolSize = 100

  # jdbc.default.minPoolSize = 10

  # jdbc.default.numHelperThreads = 3

  #jdbc.default.transactionIsolation = 1

  You would think that they would like to add this parameter in the settings of the frame page to make it easier...

  Figured it out finally after some googling on Liferay (not oracle/eid)...

  There are two files web.xml where there is a user timeout session variable.  You can update these xml files and recreate the tomcat service and it works.  I am sure that only the first file of questions that I had changed the other and the time-out is remained the same, but when I made the change to the first location of file to make them same and recreated the service it works finally.

  D:\Oracle\Endeca\Discovery\3.1.0\endeca-portal\tomcat-6.0.37\webapps\eid\WEB-INF\web. XML

  D:\Oracle\Endeca\Discovery\3.1.0\endeca-portal\tomcat-6.0.37\conf\web. XML

• Why need Session timeout with the public user for public portal?

  Hi all

  I use WebCenter Portal 11.1.1.8 and I found that with the user public space WebCenter show still expire page and redirect them to the login page. I did not understand why Oracle do? If Oracle cannot remove the public user session timeout, but they must not give this event for public user. The end user, they don't care in this respect, it just feel discomfortable.

  I really want a solution for this problem of Oracle. If the session is out of time, they only auto refresh page when the user doing anything on the new page (exp: moving the mouse, the key... event event) and the user will never know on this subject.

  You have an idea about this?

  Thank you!

  Hello.

  The patch allows just to use in file configuration web.xml depending the context-param:

  
       oracle.adf.view.rich.sessionHandling.WARNING_BEFORE_TIMEOUT
       0
  
  

  This feature is STANDARD in newer versions.

  He added the Web.XML WebCenter Portal (spaces).

  I recommend that you add by using the project of PortalExtension instead of change manyally web.xml because when you apply patches manually changes in the web.xml file are lost.

  Managing file web.xml in the WebCenter Portal (previously the WebCenter spaces) | VASSIT | UK

  Kind regards.

• in the APEX by clicking on the link hyper does not trigger session timeout page

  Hi all
  I have a question about the application of APEX session time-out. I created a simple application of the APEX. In the region report SQL section, I have code like this:
  
  SELECT DOC_Name, DOC_URL,
  "" < a href = "" | DOC_URL | "target ="_blank"/" > download < /a > ' pdf_link
  FROM test_table
  where emp_number = 00010001
  
  When the user click on the hyper link, it will show the landing page for the user (for example if DOC_URL = 'http://forums.oracle.com', it displays the oracle forum page in a new browser).
  
  But the problem is that after the user session timeout (I set to 240 seconds through shared components > change the security attributes, I put max the session for example 240 seconds timeout) when I click on this hyperlink, it does not raise my session timeout page and it still shows the page (oracle forum page).
  
  Why in the APEX by clicking on the link hyper does not trigger page session timeout after the user session timeout?
  
  How implememt or fix to trigger the session timeout page after clicking on hyperlinks?
  
  (BTW, our version of the APEX is 3.2)
  
  Thank you!

  Hello

  rather than use your my_stored_procedure you could call a new APEX page where you have a page called P999_PDF_ID. On this new page you would have
  treat a front header PL/SQL with the same code you have in your "my_stored_procedure". The only change would be to add a

  apex_application.g_unrecoverable_error := TRUE;
  

  at the end of your code as well as APEX does not generate a standard page of APEX.

  That's all. If a user clicks on a link, APEX will check the session timeout and if everything is ok, download your PDF file.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• AC VPN: vpn-session-timeout and prompt the user

  Hello

  Is it possible to invite the user to continue the session shortly before it hits the vpn-session-timeout value (ASA).

  Thank you

  Sean

  Sean,

  I believe that no job like this been done on it by the BU.

  We had this never open a:

  https://Tools.Cisco.com/bugsearch/bug/CSCsx17267/?reffering_site=dumpcr

  M.

• Why this user session becomes a timeout and disconnected?

  Hello

  I have a few users are disconnected from their display the session with a message saying that their session has expired.  It's strange, because the user will be logged into their office work and all of a sudden, they are back at the login screen terminal wyse.  If they try to reconnect, they are picked up directly on their desktop.

  I found that the messages of debug log on the view connection server.  Why is the disconnect session after the user was registered for 599 mins?

  2014 01-13 T 17: 06:13.148 - 06:00 DEBUG (0BFC-0CCC) < Timer-0 > [al] (5AED_ * _B627) Session expired: stop

  2014 01-13 T 17: 06:13.160 - 06:00 DEBUG (0BFC-0CCC) < Timer-0 > [EventLogger] (5AED_ * _B627) Warning_Event: [BROKER_MACHINE_SESSION_TIMEDOUT] 'User null timed out Session': Source = com.vmware.vdi.ice.server.al, UserDN=cn=s-1-5-21-903304000-123605126-2484215475-1892,cn=foreignsecurityprincipals,dc=vdi,dc=vmware,dc=int, time = Mon Jan 13 17:06:13 CST 2014, seriousness = WARNING, [redacted] = node, Module = broker, recognized = true

  2014 01-13 T 17: 06:13.160 - 06:00 DEBUG (0BFC-0CCC) < Timer-0 > [EventWorker] (5AED_ * _B627) initialization EventWorker

  2014 01-13 T 17: 06:13.161 - 06:00 DEBUG (0BFC-0CCC) < Timer-0 > [al] (5AED_ * _B627) notify timeout fatal error to the client: secure connection timed out (the session has expired, please login again.)

  2014 01-13 T 17: 06:13.161 - 06:00 DEBUG (0BFC-0CCC) < Timer-0 > [al] (5AED_ * _B627) Client doesn't support the client or client-error timeout error. User will not see this message of timeout.

  2014 01-13 T 17: 06:13.162 - 06:00 DEBUG (0BFC-0CCC) < Timer-0 > [al] (5AED_ * _B627) requested stop Lite session: Session expired

  2014 01-13 T 17: 06:13.162 - 06:00 INFO (0BFC-0CCC) < Timer-0 > [ay] (5AED_ * _B627) end of session [redacted] user Secure Gateway Server - session ID: 5AED_ * _B627

  2014 01-13 T 17: 06:13.163 - 06:00 DEBUG (0BFC - 00 0D) < outbound JMS Forwarder wire > [bj] point on queue "Outgoing JMS Forwarder" 816 US, queue length = 0, available workers = 0 on 1

  2014 01-13 T 17: 06:13.163 - 06:00 (0BFC - 0D 00) DEBUG message < outgoing JMS Forwarder wire > [l] sending JMS: disconnect

  2014 01-13 T 17: 06:13.164 - 06:00 DEBUG (0608-1FA8) < MessageFrameWorkDispatch > [MessageFrameWork] System::IsWorkerInstalled

  2014 01-13 T 17: 06:13.164 - 06:00 DEBUG (0608-1FA8) < MessageFrameWorkDispatch > [MessageFrameWork] System::WriteWindowsEvent

  2014 01-13 T 17: 06:13.165 - 06:00 (0BFC-1E64) < EventWorker (customer) > DEBUG [JMSCluster] not found: pae_jms.properties, using the default values.

  2014 01-13 T 17: 06:13.165 - 06:00 DEBUG (0BFC-1E64) < EventWorker (customer) > [JMSCluster] JMS env: {}

  2014 01-13 T 17: 06:13.166 - 06:00 DEBUG (0958-0DA8) < SwiftMQ SessionPool 3 > [ManagementFilter] received message from the tunnel server Logout: Type: (MapMessage\Logout);  Headers: [server, TunnelGeneration, TunnelVersion, _MS_MSGIDENTIFIER, _MS_SIGNATURE, capID, toBroker];  Body :{}

  2014 01-13 T 17: 06:13.167 - 06:00 DEBUG (0958-0DA8) < SwiftMQ-SessionPool-3 > [UserSessionTracker] successfully consolidated UserSessionTracker (sessionId, userId = [deleted item] = 9399_ * _3e49)

  2014 01-13 T 17: 06:13.167 - 06:00 INFO (0958-0DA8) < SwiftMQ-SessionPool-3 > [Audit] BROKER_LOGOFF: USER: [redacted]; USERSID: [redacted]; UTILISATEURDN: [redacted], [redacted];

  2014 01-13 T 17: 06:13.167 - 06:00 DEBUG (0958-0DA8) < SwiftMQ-SessionPool-3 > [EventLogger] Info_Event: [BROKER_USERLOGGEDOUT] "[redacted] the user has disconnected": Source = net .propero .modules .properOps .UserSessionTracker, time = Mon Jan 13 17:06:13 CST 2014, seriousness = AUDIT_SUCCESS, node = [redacted], TotalUsers = 6, UserSID = [redacted], BrokerSessionId = 9399_ * _3e49, Module = broker, UserDisplayName = [redacted], recognized = true

  2014 01-13 T 17: 06:13.168 - 06:00 INFO USER (0958-0DA8) < SwiftMQ-SessionPool-3 > [UserSessionTracker]: [redacted]; USERSID: [redacted]; UTILISATEURDN: [redacted]; has disconnected from VDM

  2014 01-13 T 17: 06:13.168 - 06:00 DEBUG (0958-0DA8) < SwiftMQ-SessionPool-3 > [ManagementFilter] invalidate session (timeout = 1 s): 93993c2b_d4ed_461e_8060_afe98bef3e49

  2014 01-13 T 17: 06:13.168 - 06:00 DEBUG (0BFC-1E64) < EventWorker (customer) > [JMSRouter] JMS Direct connect: [name = ROUTER1, username = null, password = null, siteName = null, swiftMQHost = localhost, 4001 = swiftMQPort, swiftMQSocketFactory = com.swiftmq.net.PlainSocketFactory, swiftMQKeepAlive = 60000, usingJNDINames = true]

  2014 01-13 T 17: 06:13.168 - 06:00 DEBUG (0BFC - 00 0D) < JMS leaving Forwarder Thread > [l] sent MapMessage in 4 ms

  2014 01-13 T 17: 06:13.175 - 06:00 DEBUG (0BFC-1E64) < EventWorker (customer) > [JMSRouter] JMS Direct connect: [name = ROUTER1, username = null, password = null, siteName = null, swiftMQHost = localhost, 4001 = swiftMQPort, swiftMQSocketFactory = com.swiftmq.net.PlainSocketFactory, swiftMQKeepAlive = 60000, usingJNDINames = true]

  2014 01-13 T 17: 06:13.964 - 06:00 DEBUG full sync (0958-0EC8) < Thread-50 > [TrackerObject]: DomainHealth: [redacted] version: 3071

  2014-01-13T17:06:13.965-06:00 DEBUG (0958-0EC8) <Thread-50> [TrackerManager] Sending message: (TrackerMessage SYNC {}: {v=3071, tn=DomainHealth, u=[{"type":"SET","item":{"name":"ATTR_DOMAIN_NAME","type":"STRING","stringValue":"[redacted]"}},{"type":"SET","item":{"name":"ATTR_DOMAIN_DNS","type":"STRING","stringValue":"[redacted]"}},{"type":"SET","item":{"name":"ATTR_DOMAIN_STATE","type":"STRING","stringValue":"OK"}},{"type":"SET","item":{"name":"ATTR_DOMAIN_TRUSTTYPE","type":"STRING","stringValue":"PRIMARYDOMAIN"}} ,{"type":"SET","item":{"name":"ATTR_DOMAIN_CONTACTABLE","type":"STRING","stringValue":"FULLYACCESSIBLE"}},{"type":"SET","item":{"name":"ATTR_DOMAIN_ISNT4","type":"STRING","stringValue":"false"}},{"type":"SET","item":{"name":"HEALTH_LAST_UPDATE_TIME","type":"LONG","longValue":1389654373964}}], nn=[redacted], oi=[redacted]})

  2014 01-13 T 17: 06:15.925 - 06:00 INFO (0958-0DD8) < DesktopControlJMS > [Audit] DISCONNECTED: server: cn = [redacted]; DNS: [redacted]; IP: [redacted]; USER: [redacted]; UTILISATEURDN: [redacted]; BROKERUSERSID: [redacted];

  2014 01-13 T 17: 06:15.925-06:00 INFO user (0958-0DD8) < DesktopControlJMS > [DesktopTracker] [redacted] disconnected from machine [redacted] office vdi - session allocated to 13 January 2014 7:06:24 AM CST, connected for 599 dry 47 mins

  2014 01-13 T 17: 06:15.926 - 06:00 DEBUG Agent (0958-0DD8) < DesktopControlJMS > [DesktopTracker] session counts for [redacted]: sessionCount = 1, pendingSessionCount = 0, connectedSessionCount = 0, disconnectedSessionCount = 1

  2014 01-13 T 17: 06:15.927 - 06:00 DEBUG (0958-1EAC) < 28771f0c-26cb-42c7-a27f-b6a15e40c9c6 > [DesktopTracker] onEvent: DISCONNECTED - username: [redacted]; DomainName: [redacted]; UtilisateurDN: [redacted]; UserSid: [redacted]; GroupSids:null; BrokerUserSid: [redacted]; ConnectionId:5AED_ * _B627; Protocol: PCOIP; CustomerName:; ClientAddress:; ServerDn: [redacted]; ServerPoolDn: [redacted]; ServerDnsName: [redacted]; DynamicIpAddress: [redacted]; ManagedObjectId:null; ID: [redacted]; State: disconnected; SessionGuid:d573-*-9d9b; PreviousSessionGuid:null; LoggedInAsDomain: [redacted]; LoggedInAsUser: [redacted]

  What is your session time defined under the display Configuration > global settings

• Catch the event Web Service Session Timeout

  Hi all

  I have a LV Web Service communicate to a web client (Chrome, IE, FF, etc.).  The user connects to the server and create a new session for him to help create Session VI.  One of the entrances to this function is a timeout value (default 60000ms).  The sessions behavior is such that if the user does not activate an application for web service (GET/POST/PUT/etc) within the time limit, then the session is automatically destroyed by the web service.  That's what I want, it's fantastic.

  My question is How can I detect when the session timeout happens? Another way to say, How can I detect when the user session is automatically destroyed?

  What I tried:

  • Of course, I can provide a "logout" link to the user calling ultimately "Destroy Session" VI, but I can't count on the user actually click this link (e.g. you really explicitly sign out of gmail or simply close your web browser?)
  • I thought that the only way to proceed would be to save the cookie of session ID returned by create Session VI and then query this ID to see if the session still exists (check if Session exists VI).  If the session does not exist, well, I know it has expired or the user manually destroyed it.  However, even if I save the cookie ID, I don't see where I can actually use it any where (especially not check if Session is VI). It just seems no value given to the range of sessions.

  Is this possible?

  Thank you

  Rory

  Sorry, Thomas, but that isn't going to work.  Think about it - you do not request a web service during the time-out period. You get ONLY a web service request when the client actually asked something.  The customer does not have during a timeout; It's just times out... so, there is no node on the block diagram to check because there is no block diagram... get it?

  No worries, however, I found the solution [read: workaround], even if the LV can do it (from 2013sp1).

  The best way to detect if a user session times out / out times would be for LV to this exhibit as an event in the web service. The following approach would be for LV accepts a cookie as an entry ID and then provides information on this session (i.e. the session exists).  I have a smell of two feature requests...

  But because BT cannot do these things (or not exposed to the developer), you will need to get creative on the client side.  Since I'm on Javascript/jQuery/AJAX on my front end, then it is possible for me to detect when the customer leaves the page or close the browser.  It comes to $(window) .unload () in jQuery.  Then, I can take this event and an asynchronous AJAX command of fire to one of my web service VI that will eventually call the "destroy Session" VI.

  For more information see the site here:

  http://lavag.org/topic/18490-catch-session-timeout-events-in-LV-Web-service/

  Hope this helps someone.

• AnyConnect Session Timeout issue

  We have some remote users that are not happy with the SSL Connect connection down after close their laptops or lose their wireless for once. I read this question and answer of a Cisco page and I was wondering where the session time-out setting is changed. It's on the network client, software map AnyConnect or ASA firewall?

  Thank you, Pat.

  Q. What is the AnyConnect reconnect behavior?

  A. AnyConnect will attempt to reconnect if the connection is interrupted. This behavior is not configurable and auto. As long as the session on the SAA is still valid, the session will resume if AnyConnect can restore the physical connection.

  Version 2.2 includes a roaming feature that allows AnyConnect reconnect after a sleep of PC. The client will continue to try indefinitely until the head told him he can't reconnect and the client will not immediately RIP into the tunnel when the system goes Standby/Hibernate implementation. For customers who don't want this feature, set the session timeout value low to prevent sleep or resume reconnects.

  And also, for the new AnyConnect profile changes take effect, you will need to reconnect your AnyConnect session if the new policy is pushed to the client.

• ISE 1.1 - switch ignores 'Session-Timeout '.

  Hi all

  I'm playing with the service to ISE customers and have some difficulties in function of time.

  After comments connects, the Radius attributes are sent to the switch (3750G) one of them is Session-Timeout, which should be similar to 1 h (DefaultOneHour)

  According to ISE logs and debugs switch, ISE has done well and this attribute has been sent but it seems that the switch simply ignores.

  

  May 24 07:03:11.658: %SEC-6-IPACCESSLOGP: list ACL-DEFAULT denied udp 10.1.100.194(1029) -> 10.1.100.2(389), 1 packet
  19:46:57: RADIUS: COA  received from id 36 10.1.100.6:64700, CoA Request, len 183
  19:46:57: RADIUS/DECODE: parse unknown cisco vsa "reauthenticate-type" - IGNORE
  19:46:57: RADIUS/ENCODE(00000000):Orig. component type = Invalid
  19:46:57: RADIUS(00000000): sending
  19:46:57: RADIUS(00000000): Send CoA Ack Response to 10.1.100.6:64700 id 36, len 38
  19:46:57: RADIUS:  authenticator 0B 30 6E 9B DF 97 0D A0 - D9 8B A5 5A 11 39 3E 41
  19:46:57: RADIUS:  Message-Authenticato[80]  18
  19:46:57: RADIUS:   11 42 82 E2 52 68 DF 28 CD 43 AE 88 0C 5D 91 10            [ BRh(C]]
  19:46:57: RADIUS/ENCODE(00000026):Orig. component type = Dot1X
  19:46:57: RADIUS(00000026): Config NAS IP: 0.0.0.0
  19:46:57: RADIUS(00000026): Config NAS IPv6: ::
  19:46:57: RADIUS/ENCODE(00000026): acct_session_id: 27
  19:46:57: RADIUS(00000026): sending
  19:46:57: RADIUS/ENCODE: Best Local IP-Address 10.1.100.1 for Radius-Server 10.1.100.6
  19:46:57: RADIUS(00000026): Send Access-Request to 10.1.100.6:1812 id 1645/25, len 267
  19:46:57: RADIUS:  authenticator 6D 92 DC 77 87 47 DA 8E - 7D 6B DD DD 18 BE DC 33
  19:46:57: RADIUS:  User-Name           [1]   14  "0016d329042f"
  19:46:57: RADIUS:  User-Password       [2]   18  *
  19:46:57: RADIUS:  Service-Type        [6]   6   Call Check                [10]
  19:46:57: RADIUS:  Vendor, Cisco       [26]  31
  19:46:57: RADIUS:   Cisco AVpair       [1]   25  "service-type=Call Check"
  19:46:57: RADIUS:  Framed-IP-Address   [8]   6   10.1.100.194
  19:46:57: RADIUS:  Framed-MTU          [12]  6   1500
  19:46:57: RADIUS:  Called-Station-Id   [30]  19  "00-24-F9-2D-83-87"
  19:46:57: RADIUS:  Calling-Station-Id  [31]  19  "00-16-D3-29-04-2F"
  19:46:57: RADIUS:  Message-Authenticato[80]  18
  19:46:57: RADIUS:   AD EB 99 4A F2 B9 4E BB 2E B3 E2 04 BE 5B 0C 72             [ JN.[r]
  19:46:57: RADIUS:  EAP-Key-Name        [102] 2   *
  19:46:57: RADIUS:  Vendor, Cisco       [26]  49
  19:46:57: RADIUS:   Cisco AVpair       [1]   43  "audit-session-id=0A01280100000016043E0D23"
  19:46:57: RADIUS:  NAS-Port-Type       [61]  6   Ethernet                  [15]
  19:46:57: RADIUS:  NAS-Port            [5]   6   50107
  19:46:57: RADIUS:  NAS-Port-Id         [87]  22  "GigabitEthernet1/0/7"
  19:46:57: RADIUS:  Called-Station-Id   [30]  19  "00-24-F9-2D-83-87"
  19:46:57: RADIUS:  NAS-IP-Address      [4]   6   10.1.100.1
  19:46:57: RADIUS(00000026): Sending a IPv4 Radius Packet
  19:46:57: RADIUS(00000026): Started 5 sec timeout
  19:46:57: RADIUS: Received from id 1645/25 10.1.100.6:1812, Access-Accept, len 272
  19:46:57: RADIUS:  authenticator F1 5F 57 72 FD 80 95 20 - 46 47 B5 CE DF 63 6E 1A
  19:46:57: RADIUS:  User-Name           [1]   19  "[email protected]/* */"
  19:46:57: RADIUS:  State               [24]  40
  19:46:57: RADIUS:   52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A 30 41  [ReauthSession:0A]
  19:46:57: RADIUS:   30 31 32 38 30 31 30 30 30 30 30 30 31 36 30 34  [0128010000001604]
  19:46:57: RADIUS:   33 45 30 44 32 33            [ 3E0D23]
  19:46:57: RADIUS:  Class               [25]  49
  19:46:57: RADIUS:   43 41 43 53 3A 30 41 30 31 32 38 30 31 30 30 30  [CACS:0A012801000]
  19:46:57: RADIUS:   30 30 30 31 36 30 34 33 45 30 44 32 33 3A 69 73  [00016043E0D23:is]
  19:46:57: RADIUS:   65 2F 31 32 34 30 33 36 37 39 31 2F 32 39 37   [ e/124036791/297]
  19:46:57: RADIUS:  Session-Timeout     [27]  6   2940
  19:46:57: RADIUS:  Termination-Action  [29]  6   0
  19:46:57: RADIUS:  Message-Authenticato[80]  18
  19:46:57: RADIUS:   26 46 2C B6 75 95 AF 37 E6 3B B1 CB F2 70 E0 8D           [ &F,u7;p]
  19:46:57: RADIUS:  Vendor, Cisco       [26]  72
  19:46:57: RADIUS:   Cisco AVpair       [1]   66  "ACS:CiscoSecure-Defined-ACL=#ACSACL#-IP-Contractors-ACL-4fbcd736"
  19:46:57: RADIUS:  Vendor, Cisco       [26]  42
  19:46:57: RADIUS:   Cisco AVpair       [1]   36  "profile-name=Microsoft-Workstation"
  19:46:57: RADIUS(00000026): Received from id 1645/25
  19:46:57: RADIUS/DECODE: parse unknown cisco vsa "profile-name" - IGNORE
  May 24 07:03:19.132: %MAB-5-SUCCESS: Authentication successful for client (0016.d329.042f) on Interface Gi1/0/7 AuditSessionID 0A01280100000016043E0D23
  May 24 07:03:19.132: %AUTHMGR-7-RESULT: Authentication result 'success' from 'mab' for client (0016.d329.042f) on Interface Gi1/0/7 AuditSessionID 0A01280100000016043E0D23
  May 24 07:03:19.140: %EPM-6-POLICY_REQ: IP 10.1.100.194| MAC 0016.d329.042f| AuditSessionID 0A01280100000016043E0D23| AUTHTYPE DOT1X| EVENT APPLY
  May 24 07:03:19.165: %EPM-6-AAA: POLICY xACSACLx-IP-Contractors-ACL-4fbcd736| EVENT DOWNLOAD-REQUEST
  19:46:57: RADIUS/ENCODE(00000000):Orig. component type = Invalid
  19:46:57: RADIUS(00000000): Config NAS IP: 0.0.0.0
  19:46:57: RADIUS(00000000): sending
  19:46:57: RADIUS/ENCODE: Best Local IP-Address 10.1.100.1 for Radius-Server 10.1.100.6
  19:46:57: RADIUS(00000000): Send Access-Request to 10.1.100.6:1812 id 1645/26, len 144
  19:46:57: RADIUS:  authenticator 1A 52 18 C5 25 A7 5C DC - 29 C9 5C 7C C5 B3 FC 58
  19:46:57: RADIUS:  NAS-IP-Address      [4]   6   10.1.100.1
  19:46:57: RADIUS:  User-Name           [1]   38  "#ACSACL#-IP-Contractors-ACL-4fbcd736"
  19:46:57: RADIUS:  Vendor, Cisco       [26]  32
  19:46:57: RADIUS:   Cisco AVpair       [1]   26  "aaa:service=ip_admission"
  19:46:57: RADIUS:  Vendor, Cisco       [26]  30
  19:46:57: RADIUS:   Cisco AVpair       [1]   24  "aaa:event=acl-download"
  19:46:57: RADIUS:  Message-Authenticato[80]  18
  19:46:57: RADIUS:   2B 6B 13 37 0D 25 11 E9 6A 56 35 D8 91 9F EF F0           [ +k7?jV5]
  19:46:57: RADIUS(00000000): Sending a IPv4 Radius Packet
  19:46:57: RADIUS(00000000): Started 5 sec timeout
  May 24 07:03:19.191: %SEC-6-IPACCESSLOGP: list ACL-DEFAULT denied tcp 10.1.100.194(2125) -> 10.1.100.6(8443), 1 packet
  19:46:57: RADIUS: Received from id 1645/26 10.1.100.6:1812, Access-Accept, len 359
  19:46:57: RADIUS:  authenticator 31 B0 73 93 CA 0E 5C 7C - 11 29 AA 57 6C A1 53 D8
  19:46:57: RADIUS:  User-Name           [1]   38  "#ACSACL#-IP-Contractors-ACL-4fbcd736"
  19:46:57: RADIUS:  State               [24]  40
  19:46:57: RADIUS:   52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A 30 61  [ReauthSession:0a]
  19:46:57: RADIUS:   30 31 36 34 30 36 30 30 30 30 30 30 35 44 34 46  [0164060000005D4F]
  19:46:57: RADIUS:   42 44 44 44 33 37            [ BDDD37]
  19:46:57: RADIUS:  Class               [25]  49
  19:46:57: RADIUS:   43 41 43 53 3A 30 61 30 31 36 34 30 36 30 30 30  [CACS:0a016406000]
  19:46:57: RADIUS:   30 30 30 35 44 34 46 42 44 44 44 33 37 3A 69 73  [0005D4FBDDD37:is]
  19:46:57: RADIUS:   65 2F 31 32 34 30 33 36 37 39 31 2F 32 39 38   [ e/124036791/298]
  19:46:57: RADIUS:  Termination-Action  [29]  6   1
  19:46:57: RADIUS:  Message-Authenticato[80]  18
  19:46:57: RADIUS:   80 EF 5B 80 76 F1 C9 37 0B 25 34 37 10 57 CC 44          [ [v7?47WD]
  19:46:57: RADIUS:  Vendor, Cisco       [26]  47
  19:46:57: RADIUS:   Cisco AVpair       [1]   41  "ip:inacl#1=permit udp any any eq domain"
  19:46:57: RADIUS:  Vendor, Cisco
  SW3750-1# [26]  48
  19:46:57: RADIUS:   Cisco AVpair       [1]   42  "ip:inacl#2=permit ip any host 10.1.100.6"
  19:46:57: RADIUS:  Vendor, Cisco       [26]  57
  19:46:57: RADIUS:   Cisco AVpair       [1]   51  "ip:inacl#3=deny ip any 10.0.0.0 0.255.255.255 log"
  19:46:57: RADIUS:  Vendor, Cisco       [26]  36
  19:46:57: RADIUS:   Cisco AVpair       [1]   30  "ip:inacl#4=permit ip any any"
  19:46:57: RADIUS(00000000): Received from id 1645/26
  May 24 07:03:19.216: %EPM-6-AAA: POLICY xACSACLx-IP-Contractors-AC
  SW3750-1#
  SW3750-1#
  SW3750-1#L-4fbcd736| EVENT DOWNLOAD-SUCCESS
  May 24 07:03:19.216: %EPM-6-POLICY_APP_SUCCESS: IP 10.1.100.194| MAC 0016.d329.042f| AuditSessionID 0A01280100000016043E0D23| AUTHTYPE DOT1X| POLICY_TYPE Named ACL| POLICY_NAME xACSACLx-IP-Contractors-ACL-4fbcd736| RESULT SUCCESS
  May 24 07:03:20.147: %AUTHMGR-5-SUCCESS: Authorization succeeded for client (0016.d329.042f) on Interface Gi1/0/7 AuditSessionID 0A01280100000016043E0D23
  19:46:58: RADIUS/ENCODE(00000026):Orig. component type = Dot1X
  19:46:58: RADIUS(00000026
  SW3750-1#
  SW3750-1#
  SW3750-1#
  SW3750-1#): Config NAS IP: 0.0.0.0
  19:46:58: RADIUS(00000026): Config NAS IPv6: ::
  19:46:58: RADIUS/ENCODE: Best Local IP-Address 10.1.100.1 for Radius-Server 10.1.100.6
  19:46:58: RADIUS(00000026): Sending a IPv4 Radius Packet
  19:46:58: RADIUS(00000026): Started 5 sec timeout
  19:46:58: RADIUS: Received from id 1646/35 10.1.100.6:1813, Accounting-response, len 38
  SW3750-1#
  
      SW3750-1#sh authe sess int g 1/0/7
  Interface:  GigabitEthernet1/0/7
  MAC Address:  0016.d329.042f
  IP Address:  10.1.100.194
  User-Name:  [email protected]/* */
  Status:  Authz Success
  Domain:  DATA
  Security Policy:  Should Secure
  Security Status:  Unsecure
  Oper host mode:  multi-auth
  Oper control dir:  both
  Authorized By:  Authentication Server
  Vlan Group:  N/A
  ACS ACL:  xACSACLx-IP-Contractors-ACL-4fbcd736
  Session timeout:  N/A
  Idle timeout:  N/A
  Common Session ID:  0A01280100000016043E0D23
  Acct Session ID:  0x0000001B
  Handle:  0x2F000017
  Runnable methods list:
  Method   State
  mab      Authc Success
  dot1x    Not run
  SW3750-1#
  

  Has anyone else encountered similar?

  I tried 12.2 (58) and now I'm stable

  Cisco IOS software, software C3750 (C3750-IPSERVICESK9-M), Version 15.0 (1) SE2, VERSION of the SOFTWARE (fc3)

  but in both cases, it is similar.

  concerning

  Przemek

  Hello

  Have you tried 12.2.55SE3 IOS which is recommended (tested) according to TrustSec 2.0 Design and getting started Guide implemented?

  What is your port configuration? Have you included orders "reauth?

  int gX/Y

  ...

  periodic authentication

  Server to authenticate again authentication timer

  See you soon,.

  Seba

• The access admin VCS session timeouts

  Hello

  I have asked me if there are VCS performance problems if the admin access session has the value zero, or, for example 30 minutes.

  I know that this seems to be a stupid question because he absolutely should not affect the performance of VCS, however can someone please confirm this? In addition, the number of connected users admin will have a detrimental effect on the VCS? Once again, I guess not as the default is not limited, but confirmation would be greatly appreciated.

  Thank you very much

  Howard

  Hi Howard,.

  As far as I know, the number of sessions of admin and admin session logout, does not affect the performance of VCS much. However, please keep in mind that it certainly affects the performance of VCS if the number of sessions admin VCS is superior > 5 as VCS responded to all the commands and requests by admin VCS sessions.

  So, it is advisable to set the session timeout no matter what between 15-30 minutes, so VCS kicks on the sessions inactive admin and keep resources free VCS.

  Hope that answers your questions.  Feel free to rate this response accordingly.

  Thank you

  Saurabh

• Skillbuiders (Session Timeout) plug in question

  Hello

  I have a question wth Skillbuilders "Session Timeout" plugin:

  Plugin keeps popping up on the page of connection even if the user disconnected from the application.

  I used conditions in dynamic Action to prevent the plug-in to be included on the login page (101), that it is led by their instructions.

  However, it does not work for some reason any.

  Plugin still works on the login page and warning continues to appear on the page of connection even when the disconnected user.

  I have included the condition in the dynamic action: ' not equal to ' and the value: 101 (which is a login page).

  I'm on Apex 4.2

  Help, please.

  Thank you.

  Make sure you use the condition for the dynamic action, not on the event condition rendering 'when' (which dictates the action false true vs)

• [ADF, JDev12.1.3] How/where to set the session timeout

  Hallo,

  After a few minutes of inactivity, the browser displays a message to inform that the session is not more active and only OK been must be clicked to refresh the page.

  If a dialog box "btf" has been opened on the left, it becomes...

  

  I would like to know what is the right place/method to set a deadline.

  If possible I would like that when the timeout checks, the application performs a redirect to a page I like (for example the login page).

  The application of ADF Essentials and is deployed to the GlassFish application server.

  My concern is... what should happen to the open operation / pending when the time-out occurs?

  For example, the user is modifying an af:table but it has not clicked validate or cancel...

  Thank you

  Federico

  I would like to know what is the right place/method to set a deadline.

  For java web applications, you can set the session timeout in the web.xml file. (this is the global settings associated with all sessions)

  If you wish, you can set the timeout of session by program (and this is related only to the current http session).

  If possible I would like that when the timeout checks, the application performs a redirect to a page I like (for example the login page).

  http://fortunefusionminds.blogspot.com/2014/04/how-to-redirect-to-custom-page-whenever.html

  ADF: Session expires management redirect to login page | Bungbutan

  ADF developers World: Detection and handling of user session expiry

  My concern is... what should happen to the open operation / pending when the time-out occurs?

  Well, session is destroyed, it will destroy all instances of AM and do rollback.

  See also: Andrejus Baranovskis Blog: ADF BC Application Module Instance Timeout and reliance Timeout of Session Web

  Dario

• Related workflow in the dialog box / popup window and Session Timeout

  Hi team.

  Using JDeveloper 11.1.2.4.

  We have several use cases that have linked the workflow shown in dialogues.  Dialogues are defined in the workflow.  The dialogues show very well related workflows.  However, if we have a session timeout, we are witnessing the login page that appears inside the window of dialogue instead of the home page.  Any suggestions out there?

  I have the text on a command button, invoking the action of dialogue BTF.

  useWindow = "true" windowModalityType = "applicationModal.

  Thank you

  BradW

  Hello.  Digging into the issue, we had a requirement to force the user to the logon page when the session expires.  However, the Service of Dialogue rich ADF fires and wants to ask us if we want to save the changes or continue leaving the popup.  To work around this problem, we made a JS call, follow these steps:

  AdfAgent.AGENT.removeBubbleEventListener(AdfPage.PAGE.getDomWindow(),"beforeunload", AdfDhtmlRichDialogService._beforeUnloadHandler);
  

  So, in summary, we had created a PagePhaseListener to inject some JS in every page to make a timer based client-side redirect.  However, the Service of RichDialogue ADF complain if there are changes in the pop-up window.  To work around this problem, the timer called the removeBubbleEventListener.

  It works, I think it might be a bit fragile between versions.

  BradW

• exercise of the VM session timeout problem

  Hello

  First off all I want to thank all those who contribute on this post, I have a 5.0 vcenter and vmware view running 5 customer, the problem is that on my infrastructure vm´s of users sessions go on the time-out for the most part after 7 or 8 hours of active session is probably for security reasons , I want to turn off this option, but don t know where to find the settings for it on my vcenter, due anyone know how to disable this feature?

  Best regards!

  I am a beginner on vmware view, but I'm trying to help you.

  Most common session is disconnected as a result the VMware View connection Server Session timeout.  This global setting disconnects the sessions after the time-out expires. The default setting is 600 minutes (10 hours).

  To avoid these disconnects, educate users that there is an automatic session expiration time or increase the value of timeout in minutes via the view connection server > view Configuration > global settings and enter the time in the dialog box Session timeout.

  Remember points of certification for responses 'useful' and / or 'correct '.

  -------------

  Bil Bens

• ICX: Session Timeout and ICX:Limit time

  Hello team,

  We always set ICX:Limit times higher than ICX: Session Timeout? Is the average user will get more time on one active session before it gets expired?

  Definition of the time of ICX:Limit said that he looks at the time total session before causing a timeout no matter whatever you do in application.

  
  

  Apparently I am concerned about active sessions in the application.
  

  Thank you

  Ammu

  Salvation;

  In addition to anad Hussein snoussi Asif, I suggest check link below to understand what is this setting?

  ICX:SESSION TIME OUT

  http://forums.Oracle.com/forums/thread.jspa?MessageID=4041137#4041137

  See also:
  How AutoConfig defines ICX: Session Timeout [307149.1 ID]
  How to handle the timeout to the level of responsibility [ID 412224.1]