AC VPN: vpn-session-timeout and prompt the user

Similar Questions

• The 'IETF-RADIUS-Idle-Timeout' value substitute "Vpn-session-timeout' of group policy?

  Hello community,

  I wish to have a dynamic substitution of "Vpn-session-timeout' of Group Policy (using"ldap attribute-map").

  Read the section "Support for RADIUS authorization attributes" of the SAA, it is not clear, but apparently attribute 'IETF-RADIUS-Session-Timeout' being Cisco attribute name of the ASA to "vpn-session-timeout '.

  Can anyone confirm?

  R, Alex

  Yes!

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_ser...

• ICX: Session Timeout and ICX:Limit time

  Hello team,

  We always set ICX:Limit times higher than ICX: Session Timeout? Is the average user will get more time on one active session before it gets expired?

  Definition of the time of ICX:Limit said that he looks at the time total session before causing a timeout no matter whatever you do in application.

  
  

  Apparently I am concerned about active sessions in the application.
  

  Thank you

  Ammu

  Salvation;

  In addition to anad Hussein snoussi Asif, I suggest check link below to understand what is this setting?

  ICX:SESSION TIME OUT

  http://forums.Oracle.com/forums/thread.jspa?MessageID=4041137#4041137

  See also:
  How AutoConfig defines ICX: Session Timeout [307149.1 ID]
  How to handle the timeout to the level of responsibility [ID 412224.1]

• store session variables and retrieve the

  A few months ago, I wrote a web application that uses the session to store user entries that move from one page to another. It was very successful. Then I tried to recover the data in the fromt the database field when the user connects after disconnection, but I was unssuccessful. This is my script. All I want to know who is there at - it a way to store and retrieve my session or fill my entry complete with data from the database.

  I use cf9 and mysql on a window7

  < cfset numberofSteps = 5 >

  <! - the session.registration structure contains the user input - >

  <!-who move in the wizard, make sure that there is->

  < cfif not isdefined ("session.registration") >

  <!-if structures are not create / initialize it->

  < cfset session.registration = structNew() >

  <!-start current wizard step represent one - >

  < cfset session.registration.stepNum = 1 >

  <!-we will collect these user; departure at one->

  <!-we will collect these user; departure at one->

  < cfset session.registration.firstname = "" >

  < cfset session.registration.lastname = "" >

  < isDefined ("form.fname") cfif >

  < cfset session.registration.firstname = form.fname >

  < cfset session.registration.lastname = form.lname >

  < action = 'action =' index.cfm cfform? "" StepNum = #URLEncodedFormat (session.registration.stepNum) method # ' = 'post' preservedata = "yes" ' method = "post" >

  < cfswitch expression = "#session.registration.stepNum #" >

  < cfcase value = "1" >

  < cfinput name = "Pnom" type = "text" VALUE = "" #session.registration.firstname # "onChange =" javascript:this.value=this.value.toUpperCase(); "class ="EGIT-txt"required ="true"validateat ="onSubmit"message ="You must enter a first name."/ >

  < cfinput name = "lname" type = "text" VALUE = "" #session.registration.lastname # "class ="EGIT-txt"required ="true"validateat ="onSubmit"message ="You must enter a name last."onChange =" javascript:this.value=this.value.toUpperCase(); "/ >

  < / cfcase >

  < / cfform >

  You can do it

  #firstname #.

  OR

  #queryname.firstname #.

  NOTE: in the first option if there are more then a line in the database (from inegrity of data) they will be more hten a table (since it will loop through lines in the cfoutput)

  in the option sec., it will take the value of the FIRST record in the QUERY, regadless of the number of rows contained in the query.

  Hope that this clear things for you...

• Order of execution for explicit file dialog boxes and query the user input dialogue

  Hello

  In my VI I use 1 and 2 express file dialog boxes prompt the user for input dialogue box. Y at - it any easy way to determine an order of exuction for these express dialog boxes? Or I have to use screws to notify?

  In fact, I just need the input of fo dialogue to prompt the user to be the first.

  Thanks for the tips!

  Martin

  Like most of the functions, the flow of execution can be set by plugging the error / mistake on clusters.

• When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. »

  original title:

  When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. "I can't spend anything for users of our families because they ask for approval from the admin and it won't work. What can I do to correct the admin user?

  You have another admin account , you can connect?
  If so, please do it and then run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, run the Microsoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft technical support below.

  3. If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: System Restore tutorialtutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• VirtualMachine.Admin.Name and asking the user for the name of the server

  I need to allow end users to designate the name of their server requested when you submit a request through VCAC. I do this using VirtualMachine.Admin.Name in the custom of my blueprint properties and it prompts the user to set.  I have also some scripts that run with the heel of building put into operation once the server is built which require me to enter the VC:VirtualMachine object for the server with the name of the server.  It does this in a loop in a table of all the VC:VirtualMachines met my VCenter server and find a match on the name with an xpath expression.  The name of the server is collected inside the cutting-edge designer using the getVirtualMachineName activity.  This activity is integrated into the designer and aims to do exactly what he says.  He then handed the name in the VCO workflow.  Not much, really.  I have used this method a lot in the past with VCAC.

  Problem:

  
  Recently, I started running this script on a new installation of VCO (5.5.1) and the new instance VCAC (version 6.0 - 1720522) and I see a very strange behavior.  When I get the name in the tip with the activity of getVirtualMachineName Designer, the name is that name WOULD have been affected had I pressed VCAC to automatically generate name for me using a prefix of machine profile.  Remember that you must associate a prefix of the default machine on your group of companies.  This is the prefix that is used to generate the name and associate it to the server in VCAC despite the fact that I am more precisely the substitution of this name automatically generated with the VirtualMachine.Admin.Name custom property in the custom of my blueprint properties.

  The strange thing is that the server is correctly named in the VSphere console and inside the guest OS.  In other words, the name that the user places in the VirtualMachine.Admin.Name field is what you get in the console VSphere and BONES.  So that part works.  Then why is he not being correctly named in the VCAC VirtualMachine object?

  EC which claimant misnamed is originally my workflow to fail.  I can work around this problem in the workflow, but I fear that there is still problems on the road if the alias is associated with the server inside VCAC himself.

  Once again, I did this with earlier versions of VCAC and VCO and not had this problem.  Anyone else seeing this?  I'm doing something wrong here?

  The custom property to use to allow a user to enter name themselves is the host name (just hostname, nothing else)... That's what I put to prompt the user to our forms.

• doubt Doc ID 1618305.1 how to install and configure the user interface for content with WebCenter content 11.1.1.8.0

  doubt Doc-ID 1618305.1 How to install and configure the user interface with WebCenter content 11.1.1.8.0 content

  The portal_domain field contains;

  AdminServer (admin) and Enterprise Manager, (port 7001)

  IBR_server1, (port 16250)

  UCM_server1, (port 16200)

  WC_Spaces1, (port 8888).

  On the same machine, I have another weblogic, admin and for the ITS.

  The case is that continued to develop for the upgrade to the new skin WebCenter content.

  That's my goal.

  Then I did some research and came to the following notes in support.

  1 - how to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=290841671406625 & ID = 1618305.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_216

  and

  2 - update of the 11.1.1.8.0 UI content after you apply the Patch of Bundle WebCenter content 3 (MLR 3) or higher (Doc ID 1617477.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=291485823387355 & ID = 1617477.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_245

  The UCM_server1 has the following House / app / oracle / Middleware / Oracle_ECM1 /.

  And the list of patches;

  ===================================================================================================

  Installed products of higher level (1):

  Oracle WebCenter content management install 11.1.1.8.0

  There are 1 products in this House of Oracle.

  Installed products (40):

  Cloning of the 11g Application Server 11.1.1.8.0 component

  Enterprise Manager Application Server Integrator Plugin - Management Service Support11.1.1.7.0

  FMW Control Plugin for Oracle inbound refinery 11.1.1.8.0

  FMW Control Plugin for Oracle WebCenter Capture 11.1.1.8.0

  Component install SDK 11.1.0.9.0

  Oracle Application Server Configuration 11.1.1.7.0

  Part of Oracle 11.1.1.7.0 Bali

  Oracle 11.1.1.8.0 capture

  Common files Oracle WebCenter content management 11.1.1.8.0

  Oracle Content Server 11.1.1.8.0

  Content of Oracle 11.1.1.8.0 Server component

  Content access Content Server Oracle 11.1.1.8.0

  Access to the contents of the Oracle Content Server 11.1.1.8.0 files

  Oracle Content Server Core 11.1.1.8.0

  Oracle 11.1.1.8.0 server content distribution

  Oracle extended Windowing Toolkit 11.1.1.7.0

  Oracle Fusion Middleware Admin Config 11.1.1.6.0

  Oracle Help for Java 11.1.1.7.0

  Oracle Help for the Web - UIX 11.1.1.7.0

  Oracle Help for the Web Shared Library 11.1.1.7.0

  Oracle Help share library 11.1.1.7.0

  Ice browser Oracle 11.1.1.7.0

  Oracle IRM                                                           11.1.1.6.0

  Oracle extended JFC Windowing Toolkit 11.1.1.7.0

  One-time correction of Oracle 11.1.0.9.9 installer

  Oracle outside in technology 8.4.0.0.0

  Oracle Remote Client of Intradoc 11.1.1.8.0

  Component of Oracle 11.1.1.7.0 rules

  Oracle SOA 11.1.1.7.0 workflow

  Universal Oracle install 11.1.0.9.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Upgrade Oracle WebCenter content management 11.1.1.8.0 Assistant

  Oracle WebCenter Capture 11.1.1.8.0

  Oracle Webcenter content - rights 11.1.1.7.0 documentalist

  Oracle WebCenter content - Universal Content Manager 11.1.1.8.0

  Oracle WebCenter content management install 11.1.1.8.0

  Oracle WebCenter content 11.1.1.8.0 management product suite

  Oracle WebCenter content: Imaging 11.1.1.8.0

  OracleAS Documentation 11.1.1.8.0

  There are 40 products installed in this House of Oracle.

  Interim plates (2):

  Patch 18188143: applied the sea Mar 19 17:37:32 BRT 2014

  Patch ID: 17263162

  Created February 5, 2014, 12:56:41 pm

  Bugs fixed:

  15872313, 17184457, 17515691, 16633496, 14317920, 15991141, 16892410

  14071471, 17929776, 13414481, 16042293, 17018964, 17627211, 16768600

  16037162, 14521663, 17768056, 14738077, 16460053, 17567819, 17806416

  15905591, 16080297, 17569908, 17043756, 18139768, 17211093, 17805499

  16418434, 16828356, 16671687, 17039391, 16698130, 17943394, 17632731

  17560900, 14246603, 15941347, 16045712

  Location of patch in the inventory:

  / app/Oracle/middleware/Oracle_ECM1/Inventory/oneoffs/18188143

  Patch location in the storage area:

  /app/Oracle/middleware/Oracle_ECM1/.patch_storage/18188143_Feb_5_2014_12_56_41

  Patch 18088049: applied the sea Mar 19 17:35:58 BRT 2014

  Patch ID: 17182855

  Created February 16, 2014 20:35:48 hrs PST8PDT

  Bugs fixed:

  17919101, 17894065, 17884570, 17883868, 17883112, 17854549, 17835742

  17832305, 17819213, 17812338, 17789722, 17783376, 17778867, 17761746

  17740542, 17733871, 17698852, 17658821, 17642431, 17636186, 17622384

  17616664, 17616611, 17616489, 17613656, 17608703, 17589960, 17581458

  17574153, 17567413, 17565564, 17558210, 17558068, 17546505, 17545841

  17540480, 17528590, 17514070, 17511368, 17511271, 17511089, 17501678

  17500375, 17475733, 17449617, 17421368, 17417817, 17416821, 17416807

  17416771, 17416377, 17416343, 17402732, 17401071, 17401052, 17397875

  17393920, 17393892, 17369286, 17368525, 17368096, 17362858, 17362130

  17354877, 17353764, 17352746, 17335303, 17335290, 17330493, 17324707

  17323595, 17323038, 17317268, 17314494, 17313064, 17313052, 17313000

  17312990, 17312933, 17312863, 17312366, 17298386, 17295962, 17290804

  17285105, 17270986, 17261952, 17255019, 17219134, 17216119, 17206903

  17201035, 17200854, 17199763, 17187804, 17185539, 17171852, 17171818

  17164502, 17160600, 17153780, 17074852, 17050451, 17049175, 17026301

  17008220, 17007746, 17007534, 17006378, 16999307, 16999291, 16991380

  16980256, 16980207, 16980196, 16979042, 16961904, 16958142, 16954858

  16941623, 16936055, 16936048, 16936036, 16936020, 16936006, 16935987

  16935976, 16921682, 16908287, 16858148, 16815976, 16796213, 13931337

  17424037, 17006115, 17171834

  OPatch succeeded.

  ==============================================================================================

  And contains the following configurations in config.cfg

  ==============================================================================================

  SocketAddressHostSecurityFilter = 127.0.0.1 | 0:0:0:0:0:0:0:1 | 192.168.1. * | 10.62.1.79

  xPortalSecurityPropagate = true

  Web server = javaAppServer

  AllowUpdateForGenwww = 1

  SearchIndexerEngineName = OracleTextSearch

  IndexerDatabaseProviderName = SystemDatabase

  AdditionalEscapeChars = -: #.

  FileEncoding = UTF8

  MaxQueryRows = 2000

  DisableAuthorizationTokenCheck = true

  IntradocServerPort = 4444

  SchemaPublishInterval = 604800

  SSAllowDelayedProjectWrites = true

  IdcServerThreadQueryTimeout = 120

  DisableQueryTimeoutSupport = false

  MaxSearchConnections = 20

  #Cache

  UseSearchCache = false

  #

  #AdditionalEscapeChars = _: #, -: {-}, has: A, GOLD: GOLD, CAN: CAN, AND: AND at the END:

  # Accesing a content item on a mapped Web URL (WebUrlMap) fails with the error: "unable to retrieve the content. Security access denied» (Doc ID 1639028.1()

  MaxAccountsInSecurityClause = 300

  # end (Doc ID 1639028.1()

  #Search fails for external users in WCC after upgrade to 11.1.1.8.0 (Doc ID 1676468.1()

  DoCaseInsensitiveAcctSearch = false

  # end (Doc ID 1676468.1()

  #MigrationFormatForfApplicationGUID = dCollectionName:dCollectionGUID

  ==============================================================================================

  To my UCM_Server1 content WebCenter.

  As I already have a WebCenter content I have to follow the second part of the note

  How to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1).

  Install and configure content WebCenter ADF WebUI against WebCenter Content Server

  Step 1) install the MDS schema

  (Step 2), install the Weblogic Server

  11 GR 1 material step 3) DOWNLOAD and install Oracle Application Development Framework (11.1.1.6.0) in the new WebUI WLS Middleware House, found here

  Step 4) Download and apply Patch 16, 546 129.

  Step 5) Download and apply Patch 16, 546 157.

  Step 6) download and apply the Patch and then 19,469,801, 18,102,108 Patch

  Step 7) copy the wccadf files in the field of user interface

  Step 8) Oracle on demand services (MDS) metadata registry

  Step 9) Place the WebCenter content domain user interface model

  Step 10) run the Setup Wizard on the new home of Middleware WebUI to create the new domain

  Step 11) updated the Oracle ADF of shared libraries

  Step 12) start the domain WebUI administration server

  Step 13) Save target Managed Server with the MDS repository and create the metadata partition

  Step 14) start the server managed WebUI.

  Step 15) associate UI WebCenter content to Content Server.

  Step 16) reboot the WebUI ADF server managed.

  Step 17 access the WebUI

  Step 18) complete the Configuration of the workflow

  Step 19) apply the latest Patch Bundle content UI of WebCenter

  MY DOUBT IS:

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I'm not able to do with the WLS even where I UCM_server1 today?

  Thanks for all suggestions and criticism.

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I could not do with the WLS even where I UCM_server1 today?

  Yes, up to 11.1.1.9.0, you will need to install a new wls House (new wls server admin) and then configure WCC ui there. User interface and COE will not work in the same field. You can have the portal and content under the same House of wls and install a new one for the user interface.

  This is due to a problem with ADF and WCC libraries.

  With 12 c, this dependence is not there, and you can install / configure all 3 (Portal, content and adf ui) applications on the same domain.

• Chrome does not recognize my creative cloud installed and active acrobat. I'm trying to download a PDF file from Web sites and to get the message that I must first launch acrobat and sign the user agreement, but acrobat is already underway.

  Hello

  I recently tried to switch my browser to Chrome of Safari, which I never use and I'm pretty happy with Chrome overall I had to go because I can't recognize my installation of Adobe Acrobat.

  He always tries to open them in the preview of a PDF from the web and then if I try to export it as a pdf after sitting and wait a long time for it "thinks" I get error that I need to launch adobe acrobat and accept the user agreement.

  But acrobat already running!

  Any ideas?

  If you are on a Mac, I've read that Google has recently changed to Chrome so that it cannot use Adobe PDF plug-ins. These have been not supported for many years in all cases. I suggest you to use Safari when you need PDF files (but noted that the Mavericks Apple stopped using Adobe plug-ins, however in this case, there IS a solution).

• AnyConnect VPN session disconnect and reconnect

  I have a firewall cisco ASA 5525-X set up to accept the AnyConnect VPN client (IKEv2) connection.

  AnyConnect VPN client can successfully connect.

  During the 1st 10 minutes after logging in, will the client Anyconnect VPN lost VPN connection for a few seconds (ranging from 3 seconds to 10 seconds), then it automatically reconnect back. After that, no more lost connection times.

  The lost connection happened at all multiple. So far, all at least 4 show the same problem.

  It does not affect the operation of the network, but it gives an unpleasant impression for users.

  I tried to surveillance of the ASDM firewall logs, no newspaper of no errors.

  I use Wireshark to capture traffic on the client side, also no errors detected.

  Can idea how I can continue to troubleshoot this problem?

  Hi Limlayhin,

  You can go ahead and capture logs of dart. You can download the Pack of dart for the anyconnect version you use and that you run after you experience this problem. Please make sure that everything you clear observer logs event before you launch you the Anyconnect client.

  To clear the observer event logs, follow these steps:

  1. start > run > Eventvwr

  2. it will then open Event Viewer Window

  3 maximize the application logs and services and that you will find an option "Cisco Anyconnect Secure Mobility Client"

  4. right click on the Cisco Anyconnect Secure Mobility Client and select clear logs. Select clear after that.

  Once you are done with this, launch the anyconnect connection and allow the problem to happen. Once the problem occurs, unplug the anyconnect client and run newspapers dart. It will create a Zip file on your desktop (by default) and you can go through the logs of connection Anyconnect to look for the root cause.

  Let me know if it helps.

  Vishnu

• IP overlapping between VPN remote access and within the interface

  Hi all

  I tried to replace an ASA and configured vpn for remote access using cisco VPN client.

  Remote access users are not able to access within the network, but have no problem accessing the network through a VPN site-to site.

  One thing to note is that remote access VPN users are assigned an ip address of 10.X.3.1 - 10.X.3.200 mask 255.255.255.0. The inside interface is on 10.X.1.2 255.255.0.0.

  Remote access users will have no problem to access within the network if the pool of the vpn client is changed to 192.168.1.1 to 192.168.1.100.

  ASA errors

  6 January 7, 2012 16:25:08 302013 10.X.3.1 27724 3389 10.X.1.66 built of TCP connections incoming 20940 for outside:10.X.3.1/27724 (10.X.3.1/27724)(LOCAL\Cisco) at inside:10.X.1.66/3389 (10.X.1.66/3389) (Cisco)

  6 January 7, 2012 16:25:08 106015 10.X.1.66 3389 10.X.3.1 27724 Deny TCP 10.X.1.66/3389 to 10.X.3.1/27724 flags SYN ACK on dmz interface (no link)

  I understand that the overlap between access ip address range remote vpn network interface network and inside will cause routing problems, but why the syn - ack makes its appearance in the DMZ interface? The interface of the DMZ is on ip address 172.16.Y.1 255.255.255.0.

  I intend to reduce the interface 10.X.0.0 255.255.254.0 inside if it is in fact a routing problem due to the IP address that overlap, but I understand why the syn - ack comes from the dmz interface and the diagnosis of the problem is correct. I check with the customer and was informed that the existing design works on an another ASA with no such problems.

  I agree what you said and also tried, but it does not work.

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml#overlap

  Solution, that you already know

  Solution

  Always ensure that the IP addresses in the pool should be assigned to VPN, network clients internal head unit and the internal network to the VPN Client must be in different networks. You can assign the same major network with different subnets, but sometimes the routing problems.

  Thank you

  Ajay

• ADF: Session timeout problem using the JavaScript window.open() method

  Hi all
  
  I have a commandImageLink on my page, with partialSubmit = true, clientComponent = true. ClientListener the link calls a JavaScript onClick, the fire with a clientAttribute that contains the URL for the managed bean.
  It works very well - the new window opens successfully. But the performance of any activity on the parent window, the session expires immediately.
  
  The ciLink aims to open the URL in a new window and I can not change this feature.
  
  I've tried (and failed)-
  1. put the ciLink within the tag < h:form > and using target = "_blank".
  2 actionListener on ciLink to JavaScript fire.
  
  I use JDeveloper 11.1.2.1 with weblogic 10.3.6, JSF 2.0.
  
  Thank you
  Yacoub

  Hi Anirban,

  Try to change the session cookie in weblogic.xml, seems to be cleaned each time that you access the external link:

  
    JSESSIONID-MYAPPLICATION
  
  

  AP

• ISE and AD Password expiry Notification and allow the user to change

  We are almost ready to chat live with ISE for our VPN users.

  One last thing that has been requested is, how can we ISE prompt a user when their AD password is about to expire and give them the opportunity to change it at this time here?

  I know that the ASA has the ability, if it performs authentication directly against the AD, but that the feature goes away with the IPN. So what settings are there to encourage users who connect via Anyconnect to the ASA VPN by ISE?

  We don't have any ISE Setup for internal/system users and yet, it's strictly a VPN configuration only for now.

  Thank you

  Dirk

  Yes, that's what I said in the first post.

  Since then, we use Protocol radius for password expiry notification will not occur.

  You will get a pop-up window that password is expired, please change.

  Jatin kone
  -Does the rate of useful messages-

• Using the API to connect and create the user

  I currently have only the trial for Adobe Acrobat Connect Pro, but I saw on another debate that I should have the full functionality of the API.  I have problems with the record as an administrator and creating a user.  My response xml does not match what the documentation says I should get.  When I try to log in I get status code = 'ok', but when I try to create a new user I have status not available to the code.  However, this user is an administrator.

  Call the #1:

  https://meetxxxxxxxx.adobeconnect.com/API/XML?domain=meetxxxxxxxx.adobeconnect.com & action = common-info

  Result:

  <? XML version = "1.0" encoding = "utf-8"? >

  < results > < status code = 'ok' / > < local commune = "in" time-zone-id = "85" time-zone-java-id = "UTC" > < cookies > na8breez8mky3nb7tvvda8tn < / cookie > < date > 2013-05-07T 00:35:2 7,610 + 00:00 < / date > < host > https://meetxxxxxxxx.adobeconnect.com < / host > < localhost > pcpna8app04 < / local-host > < admin-host > na8cps.adobeconnect.com < / admin-host > < url > /api/xml?domain=meetxxxxxxxx.adobeconnect.com & amp; action = common-info < / url > < version9 >. 0.4 < / version > < tos-version > 7.5 < / tos-version > < true reviews-product > < / product-notice on > < account account id = "xxxxxxxxxx" / > < / common > < reg-user > < East - reg > - false < / East-reg-user > < / reg-user > < / results >

  Call the #2:

  https://meetxxxxxxxx.adobeconnect.com/API/XML?domain=meetxxxxxxxx.adobeconnect.com & session = na8breez8mky3nb7tvvda8tn & action = login & login=admin%40test.com & password = mypw123

  Result:

  <? XML version = "1.0" encoding = "utf-8"? >

  < results > < status code = 'ok' / > < / results >

  Call the #3:

  https://meetxxxxxxxx.adobeconnect.com/API/XML?domain=meetxxxxxxxx.adobeconnect.com & session = na8breez8mky3nb7tvvda8tn & action = principal-update & name = newUser & last-name = - & login = new User%test.com & password = test1234 & type = user & send-email = false & has-children = 0 and email newUser % you st.com

  Result:

  <? XML version = "1.0" encoding = "utf-8"? >

  < results > < status code = subcode "lack of access" = "no-login" / > < / results >

  Looks like you do things out of order. You should start with the login call (#2) and then use the common-info call (#1) to get your session cookie id. It may be that you are using an invalid session cookie on before you connected.

  In addition, you have a lot of extra things to your calls. You don't need the field = value xxx. Clearly explained in the documentation here (http://help.adobe.com/en_US/connect/9.0/webservices/WS5b3ccc516d4fbf351e63e3d11a171ddf77-7 ff5_SP1.html).

• Put prompts the user for the report associated with BAM 11 g

  I have a wise distribution of the price when price report area > some user defined value. I've implemented which user promt help to filter option. In my report, there are 4 reports say Report1, Report2, report3 and rapport4 displayed at the same time. Report2 needs this value set by the user for the price to charge. But in my case, before loading the full report, it is asking for this value of price. I want to put the user defined ask prices in the associated report.is is possible? Please suggest.

  You can do this by doing two things:

  1. open report you in edit mode, select the display 'A' (if this is the first view, it will be selected by default), click on the link "Modify report properties" on the left, this will open the settings window and guests. Click on the command prompt, and then click on edit. Click Next, Next and proceed to the third stage where are the values of guests. Click on any value, and then click default (to make this value as a default)-an arrow will start pointing your default value. You can also select "All" and make it your default. Finish it.

  2. click on change display and then to the data screen, go to "Surface invite" tab and choose for your prompt display option in the title of "view".

  Save and open the report. Now, it asks you to enter a value any before loading one of the views. The default 'All' (or the default value you set) will be used to load A view and by the drop-down list of values, you can change to filter the data from this point of view.

  Thank you
  Vishal
  Development of BAM