user updated his Ipad for work.  He doesn't know the icloud login/pwd for her.

Similar Questions

• When I updated the shock of the clans for my daughter on his iPad, it has its own apple ID. and iCloud, my ID apple came on his id for the update, where it has its own apple ID now. Please can someone tell me why the update came not through its id.

  When I updated the shock of the clans for my daughter on his iPad, it has its own apple ID. and iCloud, my ID apple came on his id for the update, where it has its own apple ID now. Please can someone tell me why the update came not through its ID thanks

  It seems that if the application has been downloaded on his iPad while it is connected to your Apple ID. If so, he'll always want to be updated with your Apple ID.

  You must remove the application from his iPad and then download it again while it is connected to its own code of Apple.

• My ipad is disabled. How to activate ipad without data loss? I know the password

  My ipad is disabled. How to activate ipad without data loss? I know the password

  You can not. If you know the password, how the iPad become disabled? If the device is disabled, the content is not already available. The only way to recover the device is to restore. You can restore your last backup after that. Follow the instructions in this document support. If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• uninstaller application, created with Labwindows CVI, work of doesn´t after the upgrade to version 2010

  Hello

  I worked with Labwindows CVI 2009 without problem, but after the upgrade to the 2010 version, I have the following problem:

  When I m going to run the unistaller, Panel configuration Windows or directly from the icon uninst.exe, it doesn´t work. The PC thought for a few seconds and does nothing, and it happens with all applications that I build with Labwindows CVi 2010.

  Thank you

  Asier

  Hello-

  You install these distributions on a non-English system?  If so, the first thing to try is the workaround solution listed on this known issue.

  The known problem lists only the Italian OSs because inconvenient BONE, but in fact, it can happen on of many different non - English OSs. I will update the text accordingly the next time I update the list of known issues.

  NickB

  National Instruments

• Firefox 40.0.3 doesn't know the preferences for video file?

  I have a slow internet connection and use Firefox to get the youtube URL, then copy and paste to youtube-dl to download the file. I watch offline. This worked ok until that firefox 40.0.3. It seems to ignore the preference "always ask" and starts playing the video immediately.

  YouTube may have switched Linux users to its newest HTML5 player, which does not use Flash. If you right click on the drive, you should get a popup to short. The last line of the menu short should indicate if the HTML5 player or Flash Player. Or if you get the regular Firefox context menu, it is not Flash.

  Short-term workaround solutions:

  (1) use the extension Flash Control to stop HTML5 video (and Flash video) AutoPlay

  • https://addons.Mozilla.org/firefox/addon/Flash-control/

  (2) YouTube forces use Flash instead of HTML5. There are a few modules for this. Either of them will do, you don't need both:

  • https://addons.Mozilla.org/firefox/addon/YouTube-Flash-Player/
  • https://addons.Mozilla.org/firefox/addon/YouTube-Flash-video-player/

  I heard that these don't work for YouTube integrated on other sites.

• So, based on the latest #2 update there is no work around at all until the fix is pushed?

  "CREATE APP" would be the best solution until CS6 Id and Adobe viewer are updated?

  There is a solution. Download your slips to your account using the Panel Builder Folio. You iPad, sign in with the same account in Adobe Content Viewer. You will have your Folio there for an overview.

• 4.4 LR works but doesn't show the photos?

  My computer is dead and needs a lot of work, including a new motherboard and new graphics cards. Now 4.4 LR shows a photo. LR seems to work fine in every other way, but where the pictures should be the spaces are empty. I vaguely remember something like what is happening before, but I don't remember the solution. Any suggestions?

  Thank you

  Doug

  Re-calibrate your monitor.

• iPad mini 3 will not start after the os 9.2 update

  I just updated my ipad mini 3 iOS 9.3, after the download and installation now it does not start. just show a white screen with black apple logo.

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Know the responsibility a user IDs

  I'm working on an application that is customized using the OPS.
  Now, I need to know the user ID assigned to a Director's liability.
  I also know that the name of the responsibility. I also find the id of the responsibility.
  So for name of responsibility, I need to find the id of the responsibility, and use it I need to find the ID of the user associated with this responsibility.
  
  Kindly let me know the names of the tables in the system I can get the above.
  
  Concerning

  I'm working on an application that is customized using the OPS.
  Now, I need to know the user ID assigned to a Director's liability.
  I also know that the name of the responsibility. I also find the id of the responsibility.
  So for name of responsibility, I need to find the id of the responsibility, and use it I need to find the ID of the user associated with this responsibility.

  Select * from fnd_user_resp_groups where responsibility_id = (select responsibility_id from fnd_responsibility_tl
  where responsibility_NAME = "system administrator");

  Thank you
  -Anil

• My child has its own Apple ID, throughout I would buy apps for her and she would transfer to his iPad. But since a new update she has no access to its power supplies that are on my shopping list. She is using "Video star" app?

  My child has its own Apple ID, throughout I would buy apps for her and she would transfer to his iPad. But since a new update she has no access to its power supplies that are on my shopping list. She is using "Video star" app?

  Hi Breda49

  iTunes purchases (free downloads are taken for granted) are permanently linked to the Apple that was used to buy ID.

  To work around this problem, you can set up sharing of family and your child. This will allow you to share all your purchases.

• By updating my IPad IOS 9.3 Air, the following message appears: "unable to verify the update.  9.3 IOS doesn't have a verification because you are no longer connected to the Internet.  New attempt remind Me later

  By updating my IPad IOS 9.3 Air, the following message appears: "unable to verify the update.  9.3 IOS doesn't have a verification because you are no longer connected to the Internet.  New attempt remind Me later. " See the image below.

  Note that while I am able to get the email, do some research on the Internet, etc., that the update itself seems to be the culprit the disconnection of Internet while performing the check.  I closed all applications and even rebooted the IPad and then tried to run the update, but still get the same message.  Any other suggestions?

  Thank you in advance for your help!

  

  I'm having this problem too.

• I want to prepare an old iOS9 iPad to send to an old lady of 82 year in Greece, using my macbook. I intend to do the following: 1 login to my account to /iTunes from apple. 2 make a new for her with his email and

  Can I put an old iPad up with a new Apple account (email and password) to send overseas to a friend. How do I do that? It is what I have and have not understood until now. Already synchronized and set a new iPad with my account on my MacBook Air. . Fact

  Can I restore the oldiPad and when he asks me an Apple ID I log out of mine and create a new one by putting into his email and password put the address and and I don't want to put in a credit card, the value as 'None', then continue to synchronize the former iPat to the new account, but on my computer.

  Or do I first log out of my own apple account before you restore the iPad and create the new account. Then restore the iPad and give the new account details?

  I would then download a few free applications, like Skype, team Viewer, kindle, etc., using his account.

  When I disable allow the iPad to my account/compluter/iTunes/iCloud/etc? I know that it's going to be synced to my computer, and she'll have to re - synchronize with its own computer (windows7) using the account I created for her. She will always be the apps that I have loaded on through my computer?

  More important still, when log out of his account and back in my own, on my iPad new and already synchronized, will I even when my own music?

  I would be very grateful if someone could take me through the steps one by one, as I am confused by all the different directions I think

  Hello

  You must disable find my iPad.

  Then restore back to factory settings.

  Then its ready for the new user.

  See you soon

  Brian

• updated my driver for my Ethernet controller and now it does not work

  Original title:

  Network network network Ethernet device

  I updated my driver for my Ethernet controller and now it does not work... I can't put it up, are the only choices that I
  to establish a wireless connection or set up a broadband connection using a user name and password but my ISP does not require
  a kind it will not accomplish the connection in place, I use win 7 64, how do I fix this so I can use my connection ethernet again?

  Hello

  You can try the following steps and check if it works:

  Method 1:

  You can restore to an earlier device driver if you are having problems with your computer or device after upgrading the driver.

  Restore a driver with its previous version

  http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

  Method 2:

  If the steps above fail then you can perform a System Restore to an earlier point when it was working fine.

  It will be useful.

• Error message: "logon user interface host windows stopped working. & configuration of updates fail

  Several days ago I started having the application error "windows logon UI host has stopped working".  This happens when I connect. and also on the update of windows, when they tried to configure windows update it says "failure configuration update of windows. Returning from the changes. and it restart the whole system again.

  For your information, I use windows 8. so help me solve this problem. TQ

  Hi ZakwanSalleh,

  Thank you for choosing Windows 8 and join us on our community.

  From your description, I understand that you get an error message during newspaper saying "logon user interface host windows stopped working" and after the update of Windows as "failure of windows update." Returning from the changes.

  We get the Windows log on error message if the computer is running out of memory. Then I suggest you perform these methods and check.

  Method 1:

  I suggest you perform a clean boot and remove all unnecessary programs installed on your computer.

  Clean boot: To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Please go through step 3 KB to maintain the computer to a normal startup after you resolve the issue.

  Method 2:

  I also suggest you to run a sfcscan and check.

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool allows to challenge violations of integrity

  Follow these steps to run sfcscan.

  a. press Windows + X keys and click / tap on (Admin) command prompt.

  b. in the elevated command prompt, type sfc/scannow, and then press ENTER.

  NOTE: It can take some time to finish the race.

  For the error "failed windows update Setup. Revenant changes"I suggest you follow the steps in the article and check. Here is the link for your reference.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358#method3

  It will be useful. For other related issues in Windows area it always welcome in our community.

• Update plugin chrome for Flash does not work

  I am a Mac OS X 10.5.8 user and I use Chrome as my standard browser. I've updated the Flash Player version 10.3.183.23 2 times now and it's still not working and show me that I have an older version. Whenever I try to update the plugin it installs and then, everything like that when I restart Chrome. Could you help me here?

  Hi people,

  I hope you guys know that Mac OS 10.5.x have officially been abandoned to take supported by Apple (as a provider of operating system) and Google (as a provider of browser) just now. If this intentional sound behavior of Chrome in the same behavior than recent Safari. I tried searching around and found this post on the Google site:

  http://support.Google.com/chrome/bin/answer.py?hl=en&answer=2599452

  http://productforums.Google.com/Forum/#! Y_s0YY2wQkQ/chrome/subject

  For above discussion forum, there is a user who has found a solution to its peril:

  https://productforums.Google.com/Forum/?fromgroups=#! 5B 1 category-topic/chrome/mac/_CnkF0tj6xk % - 25 %5D

  It's you if you want to try it, but please understand that the environment is at risk of security issues, since all the software of OS, browser and plugin don't provide update of security for you.

  Thank you

  Hitomi