Permissions of domain on device vcenter
Hello community,
I have a problem with the assignment of permissions of domain on the vcenter Server device. The vcenter is in the area, but if I want to assign certain users or groups from the domain drop-down list does not show the area (see screenshot). Does anyone have an idea?
Thanks and greetings
Manual
Have you changed the name of host or IP address of the device?
Check here: http://www.virtual-blog.com/2012/09/failed-to-connect-to-vmware-lookup-service/
Tags: VMware
Similar Questions
-
Cannot connect to one or more systems of vCenter server: 5.5 DEVICE VCENTER
Hi all
Please help me.
I installed with the new v 5.5 Center device in my environment.
I connected with external oracle db.
enabled embedded SSO.
connected with windows AD.
in the screen configuration .the entire state of the service are running. Ok
After web client loggin
https://x.x.x.x:9443 /.
HAD an ERROR.
"Cannot connect to one or more systems of vCenter server:
Note:. I reboot my device vcenter and try... got same error.
I created the new group for vcenter advertising and tried... got the same error.
When connecting with the Vsphere client: error below.
"Connection unknow error (this only happens because of a logon failure." (Unable to connect to remote server")
Please help me on this.
Browlin
Hello P.,
After re install and follow the previous step the problem is resolved.
Thank you
Browlin
-
vSphere SSL for the Web Client (device vCenter) certificate error
Hello
I installed ESXi 5.5 and right once I deployed the device vCenter. After the configuration and a few reboots, I navigates to the web client, and I get this error when I try to logon:
"Based on the current configuration, the authentication server's SSL certificate was not reliable."
I have until this google everything on the subject and outside tutorials on how to change certificates in the Windows version of vCenter, nothing on the device of vCenter. I was happy when I found the 'Certificate regeneration enabled' checkbox, but that did not help either. I can test successfully SSO settings in the control panel of vCenter.
Everyone please?
Edit: I should also mention that I am not able to connect to vCenter with the vSphere client. I get the "Cannot complete the connection by incorrect username or password". I use [email protected] as user name.
Have you tried that? VMware KB: Troubleshooting the vCenter Server Appliance with Single Sign-On login
-
Create permissions to the level of vCenter using PowerCLI
PowerCLI command:
New-VIPermission-role "RoleABC" - main "Domain\Security Group" -entity vCenter
It is not possible to create permissions in vCenter level using PowerCLI?
If I want to add permissions for a particular port group, which VIObject should I use for - entity?
Thank you
Try it like this
New-VIPermission-role "RoleABC" - main "Domain\Security Group" -entity (data centers from Get-file)
-
How to give permissions to domain users to install fonts
I small Org when users in domain Want To install font they Asq for administrators
How can I give permissions throw GPM.msc
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/category/w7itpro -
Impact of a change of the IP address of the device vCenter
We replace our vCenter (Windows Installer) with a new installation of the device of vCenter. For many reasons, we need to keep the same IP address in the former vCenter. I am directed by the unit of vCenter and the failover time I go to 1) re - ip unit to have the old IP vCenter or 2) add a 2nd NETWORK card with the same IP address as the old vCenter
Are there objections to one of these options? and which option would be best?
Not to my knowledge. You should be golden.
-
Problem device vCenter &; Web-Client
Hello
I deploy new servers with VMware vSphere with VMware vCenter Server Appliance 5.5.
I have a problem! When I connect to my server vCenter Server with vSphere Client, it shows all, host and the VM.
But with vSphere Web Client, show only the 2 host and the VM of vCenter device. In addition, this presenter "not responding" but with vSphere Client run without problems
Could you help me?
Thank you
Hello
I solved the problem by resetting the database. I lost all the configuration but works fine
Thank you
-
How to change device Vcenter 5.1 to 5.5?
How do you improve an existing unit of the Vcenter 5.1 to 5.5? I looked in the documentation, and I'll be darn if I see it.
Thank you!
Arch
In the upgrade of the old device tab, copy the key (which is the VCSA 5.5) and do an import of key... Once the import was successful, copy the key and paste on the VCSA 5.5.
-
Remove manually removed from device vCenter data store
Hi all
I was doing some cleaning storage today and accidentally deleted a LUN which had not yet been withdrawn from Vcenter data store (or one of the hosts). Of course delete it, etc. does not now. I found this article for manual removal of data warehouses, but it seems to be expecting Vcenter to run in a Windows Server/MSSQL database. I am running the latest version of the Suse standard device. Can anyone help translate these instructions in a game can I use the appliance?
Thank you!
Thank you both...
In fact, I don't know why I don't think to do it anyway, but here's what I did:
Switch to view Datastore
Click on the dead DS, click the hosts tab. Guests who think that the DS is still alive will be listed.
Click on each host and tell it to rescan the HBAs, etc.. When they have finished sweeping, he drops out of the list. Finally, the DS will disappear.
No need to restart the host, but this suggestion gave me this idea. In addition, good info on the DB for the machine tools. I maybe those reference again...
-
vCenter 6 device - integration of group do not add rights
New construction and installation to 6u1 vCenter. Unique AD environment. Nodes basic settings migrate work and existing vCenter 6 (windows setup) in this new facility (aka AD works and is working with the other vCenter 6 yet).
The installation program was by guide I have found online + made my notes:
##################
Now join the AD authentication system and set permissions:
http://Wojcieh.NET/vCenter-server-appliance-6-VCSA-configuration/
Input domain Details: example "ibm.aessatl.arrow.com".
Test
Assign 'IBM\Domain Admins' high-level rights vCenter
-> Global permissions ' + '.
Select the group "domain admins".
Add
Set the permission for vCenter from of the same steps above
Now set the permission of SSO for the device
vCenter Home-> Administration-> manage
################
When I login, I get "no inventory".
When I add a user from ad it gives me rights (aka AD work), so it's sort of the group authorization.
Nothing, that I see in newspapers to guide to help debug this. Any ideas?
Thank you
After several attempts... reloading... using test systems... I found the way to make it work.
You must get the vCenter server to join AD, not just add AD as an authentication source.
Example:
(1) remove all AD / LDAP sources and awarded the first permissions
(2) attach vCenter device to AD
Connect to vCenter via administrator account SSO-> Home-> Administration (left menu)-> Deploy (left menu)-> System Configuration
Select 'node', which should list the vCenter Server-> Manage (tab at the top)-> advanced-> Active directory-> choose the "Join" button
Settings for the field (leave empty organizational unit for most customers) and entry of user input "admin area" who can join the field systems
Task will run and not nothing intelegent... but no error means success event although java doesn't refresh it is now in the field.
Restart the vCenter. Open again as the SSO administrator account and is host to vCenter in the field.
You can also display the vCenter server is a host in AD as a computer object (Active Directory users and computers-> UO "Computers")
Now go back to add the announcement as an authentication source
Home-> Administration (left menu)->, Single Sign-on (left menu)-> Configuration-> click on '+' to add a new source of
Choose an option above to the announcement page and do not change any other settings
Last step is to add the "Domain Admins" group of the field to be a member of the 'Administrators' to vCenter role.
Now when you connect as a 'ibm\jsmith' you should see objects and have permissions.
Hope this helps someone.
-
Is possible let activate domain multi UCS VM - FEX and sign up for the same vCenter
Hi Experts,
We have 7 domain UCS. But only a vCenter. Now, we want to enable VM - FEX on each UCS area and sign up for the same vCenter. Is - it work? I have found no description limit configuration on this relationship.
Or we create 7 vCenter for each UCS area? (But I think it's not sense.)
Best regards
Meng-Yuan Hsieh (Nick)Hi Moua!
I open a TAC case on that, and after that many discussions with Cisco, connecting several areas a single vCenter UCS is supported. However, it turns out that Cisco failed to document this and how to make it work. You will find that the procedures were written in old documentation for VN-LINK and others for VM - FEX. This documentation shows that it is necessary to create new certificates, and it must match the key to expansion. This is NOT true nor with the new versions of UCSM and vCenter. Cisco, said they will update their documentation.
Here are the steps that we took to connect two UCS areas for the same vCenter using default self-signed certificates. I hope this helps... Please mark this message as the right answer when you get a chance. Thank you!!
vCenter Version: 5.5
UCSM Version: 2.2(5a)
- On the VM in UCS Manager tab, click VMware.
- Set up a key of the unique extension for every area of UCS.
- Click on "Configure VMware integration" on each area of UCS and export expansion of local storage.
- Install each UCS domain extensions in vCenter.
- After you install the extensions, back to UCSM and click Next where you left off in configure integration with VMware
- Run the wizard and after that it's over, areas of the UCS should now be connected to the vCenter.
-
root vCenter device connection refused
Hello
facing a problem for the last 4 months.
I am unable to connect to the root device vcenter account.
via ssh or local console. raise them an access denied error.
I tried to see if the password has expired by this article: http://www.virtuallyghetto.com/2013/09/how-to-recover-vcsa-55-from-expired.html
It was not the case.
while I was there, I decided to try this: http://www.virtualpotholes.com/post/124746380849/how-to-reset-the-root-password-for-vcsa-60
has confirmed that several articles said the same thing: http://www.settlersoman.com/how-to-reset-root-password-on-vcenter-appliance-vcsa-6-x/
saved the file of the shadow, disassembled the drive and rebooted.
I am still unable to connect local shell or ssh.
I'm puzzled.
I found some details on the reason that what was going on.
When I tried to connect ssh I would just get access denied. even when you connect through the console.
When I tried to change the console session (ALT - F1) and logging in there I got an eloquent message.
account locked due to 1342 connection failures
as I said, it's been 4 months.
any reset procedure I tried worked. However, the account was always BLOCKED.
According to the documents of the shadow, it was not. but according to the addin to pam tally2 it was!
following this article (http://www.sneaku.com/2015/06/12/vrealize-operations-manager-6-0-root-account-locked/) and general linux distro forums skimming validated these results.
I could use to unlock the account.
-
Cannot start device to host vCenter
Nice day. I have a strange here and can't find any info on the web, hoping someone can help. I have 2 5.5 ESXi hosts, one of them is running device vCenter. I can't start the machine vCenter using the following command from the command-line... vmsvc/power.on vim - cmd 14 (14 being the ID of the device of vCenter). All other VMs on the host started very well by using this command. When I tried on vCenter, I get no response, no error, nothing. The order is always suspended more than an hour now. I already tried to simply recharge the host but got the same problem, trying to start vCenter device. The CLI is now completely useless... Can I push on and get a return transport but nothing else, cannot ESC, out of order or the CLI or whatever it is. Anyone seen this before? Any suggestions?
This article solved my problem. I consulted the host directly through vSphere, has been able to view the data store and the files of the virtual machine. Renamed .vswp and .lck files and she pulled up in 2 seconds approximately. Much thanks to the author of this article
http://www.virtxpert.com/failed-start-virtual-machine-error-18/
-
Unable to add previous hosts to vCenter device
Greetings. We are migrating our guests to new hardware. We had three hosts for running ESXi 5.5.0 - 1331820 with the vCenter device on one of them. Everything worked well. In the process of moving virtual machines around, vCenter device has been deleted (intentionally). We recreated the device of the OVA 5.5.0.5201 vCenter and ran through the Installation Wizard as previously.
Now, when you add one of the existing hosts to vCenter, it finds the host and displays information. When the user clicks on finish, it works quickly up to 80% and the host appears, and then disconnects. The log shows: add host independent, added host, unable to connect host computer in the data center; connection error host, removed in the data center.
The error showing is: cannot communicate with the specified host (x.x.x.x). The host may not be available on the network, may have a network configuration problem, or that the management on this host services may not respond.
Now the stupid thing is that we can not even add the host on which the vCenter unit is on. In addition, all hosts and vCenter unit are on the same network of management. There is no firewall doesn't block all ports. I read through a lot of the display of the Knowledge Base, and most is in regards to incorrect IP addresses or ports blocked or similar. I checked through everything and could not find anything wrong.
Last thing is that we amazed the ESXi host that had the vCenter device on it and re-installed 5.5.0 - 1623387 ESXi (version a little more recent than before) and reinstalled the that vCenter device exactly as before. Now we can add that the host but still cannot add other hosts. So it appears the issue is something with the hosts and not the device vCenter.
Anyone have any ideas?
I run in to the same kind of problems with other factors.
FWIW, have you tried the following in this order? 1 stop the vpxa on host, 2 service. Stop the service vmware-vpxd on the vcenter server, 3. Start the vmware-vpxd on the vcenter server, 4 service. Start the serivce vpxa on the host. Then try to add.
-
Hi all
I noticed I can give permissions to domain users on the hosts, etc. resource pools but not on domain groups. In other words, I can give the permissions, but they have no effect on the members of this group.
did I miss something when I assign a role to a group of area on an object? Surely others have hit in this...
Would love to help with what I'm quite stuck...
Kind regards
Ron.
RvStenis wrote:
AWo: I was with a group of distribution, tried with a new group of security, no results...
Stay with the security group, distribution of groups do not work.
You log on to the domain with the user after him add to the group. Otherwise its security token does not contain the group.
AWo
VCP 3 & 4
Author @ vmwire.net
\[:o]===\[o:]
= You want to have this ad as a ringtone on your mobile phone? =
= Send 'Assignment' to 911 for only $999999,99! =
Maybe you are looking for
-
I can't access my account settings. When I try to access account settings by navigation in tools-> account settings, TB freezes and simply emits a sound from there to the front when I click anywhere in the application. I have to close TB via the Task
-
JavaScript does not work.
I downloaded and installed Javascript, but I can't get it to load. When I go in my addon settings, he says he's vulnerable and allow me to activate. I tried to give each specific site permission to run, but sites such as Netflix and Facebook not work
-
Since Version 8, bookmarks "Sort by name" does not work. No work around?
By selecting bookmarks and scroll down to a desiredbookmark, do a right click on the selected bookmark bringsto the top a submenu with "sort by name" as one of the choices.By clicking on "Sort by name" has no effect. No sorting occurs. I sent a bug r
-
Windows xp will not recognize or list the wireless connection.
Original title: we changed wireless routers and now windows xp will be same not recognize or the same list if wireless connection 3 computers in the House will be Under networkconnections the old wireless router, or the other is visible. I tried to
-
No sound - hp laptop Pavilion dc9925nr/turion tl-
The sound icon often indicated his was not lit (red/slash circle of exploitation) and when, the volume decreases to 0 by himself. Running maintenance, says error sound card is not installed/detected. Geek Squad made diagnoses and cleaned things said