Users missing option
HII after update my motoe 1st generation in lollipop. Missing users which is present in MotoGP or motoe 2nd generation
If it's not official. The question should not be here. You can ask the question where you received the update...
Tags: Motorola Phones
I want to listen to my application when the user opens the application Options . I would also like to know what kind of user currently editing options. using
ApplicationManager.getApplicationManager () .getVisibleApplications () I can learn when the user open Options applications. But I want to know what type of currently open user options.
We have 200 mobile clients, I want to restrict the user to change some Options.Is is possible?
Thanks & best regards,
probably because the Indian Government had some struggles with RIM because of the encryption.
See http://www.pcmag.com/article2/0, 2817,2375442,00.asp or other similar objects.
but as far as I know THAT BES is available in India, otherwise the Government would not these struggles with the rim.
our company sells a bes servers in Germany, but I have no idea where to get them in India, perhaps you can find a local partner or the RIM alliance member and ask them?
preset user missing to develop the module? How to fix
If you mean the 'presets' entire pane is missing, you can right click on one of the titles pane and select it from the list.
If you mean that one "Preset" seems to have disappeared, you will probably need search for files ending with ".lrtemplate" using your operating system tools
"Fill in" Photoshop (using the latest creative cloud) dialog is missing option "Scripted Pattern" that is supposed to be all down. Instead, in the middle of the box I can check the word "Script" which shows that fill six patterns (for example, brick, Sprial, etc.). In the tutorials, I see that using templates film script (option for a tree) evokes many, many choices.
Go to the section filter > Render for three other scripted fill options
Trees, flames and photo frame
In Windows 7 If you hold the SHIFT key while clicking a program icon you are supposed to get some hidden options "run as Administrator" or "run as different user". In my case, the second another user option is missing. How this can be solved?
You can check out the tutorial here for the "Run as Administrator" option.
It is a registry change so be sure that you make a backup in case it does not work as expected.
NOTE: the REGISTRY settings change incorrectly can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
Please let us know if it helps.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
I have an e-all-in-one printer HP Officejet Pro 8600 - N911a (CM749A).
On Windows 7, the HP scanning software has an option to scan both sides (duplex), when you use the automatic document feeder.
But I am a Mac user and in the scanner HP for Mac software, this option is missing. Why?
It is really useful. I wish I had this option on Mac. Or is it there? Thank you.
Duplex (two sided) is compatible with OS X using the scanner HP for OSX software
If you haven't done so already, download the full driver HP package for the HP Officjet 8600-hp.com
When you install, in the first few install screens and the Installation Options screen, be sure to select "Software recommended by HP" - then the HP scanning software will settle.
(Note - Minimum install is the default, and this only installs the utility driver printing and files to support ICA scanning Preview/ImageCapture, that do not support the two faces of scanning).
After installing sw, go to Applications / Hewlett Packard folder and launch application from HP.
Open the< to="" view="" the="" detailed="" dialog="" box="" view.="" choose="" document="" as="" the="" "type"="" and="" you'll="" see="" the="" option="" to="" select="" 'scan="" both="" sides="" of="" pages'="" at="" the="" bottom="" of="" the="" dialog="">
works for me, hope this helps
Last night, I tried to connect to my Windows Vista laptop. At the time I didn't realize it but I entered the wrong password, instead, I thought I was trying to log using the wrong user.
I have advanced and dial-up user log-ins and it was at that point that I realized that the password has been my problem from the beginning.
Right now I wanted switched back to the user login, but the ability to "change user" is gone.
The only way I can access this laptop is with this specific user login.
Thanks in advance for the help.
It seems that if you somehow locked the system and when it is done it can only be unlocked by the user who has locked (which is why you see a log on option instead of a disconnect option and pushing the logon option gets you only to this one screen because it is the user who put in place the lock.) This is normal and the way it's supposed to happen. You can not change user if the system is locked by another user. Once you login, you should be able to then go to the Start Menu and change user because the system is locked is no longer.
If change username does not appear as an option in the start menu and the problem is not that the system is locked, then it may have become disabled. Here is a procedure to re-enable the switch user option in the start menu if it's missing:http://www.vistax64.com/tutorials/89939-fast-user-switching.html.
If you want to change username (and don't mind close all windows for the current user, not), then you can press ALT + F4 and which will eventually wear a shutdown window. Click the arrow next to the selected option and other options appear. One will be to change username. Select it and click OK. The switch user should start.
I hope this helps.
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Suddenly, I became unable to connect to any email and at least a few websites using Firefox. Œuvres of IE8 (64-bit). Finally, I have determined that the part of my Firefox 3.6.13 User Agent string had disappeared. I reinstalled it but it has subsequently disappeared. Now, he disappears a few seconds but poster on "what's my User Agent" immediately after installation. Then he is gone before I can log a page.
Your User Agent:
Your IP address: 184.108.40.206
(No given transmitted IP)
The full header sent by your browser is:
HTTP_CONNECTION:keep - life
HTTP_ACCEPT_CHARSET: ISO-8859-1, utf-8; q = 0.7, *; q = 0.7
HTTP_ACCEPT_LANGUAGE: en - us, en; q = 0.5
HTTP_COOKIE:ASPSESSIONIDQCRRAACS = DGPLICDBLKEBADAFMCPPOCLA
[QUESTION: the information above stored in the registry or where?]
What is missing here is:
HTTP_USER_AGENT:Mozilla / 5.0 (Windows; U; Windows NT 6.1; en-US; RV:220.127.116.11) Gecko/20101203 Firefox/3.6.13
[after "Your User Agent:" above]
This is the part that reinstalls and then disappears. The problem must be something that affects FF, as an add-on or something stupid or harmful presence on my computer that only affects the FF or FF. I tried to install the earlier version of the 18.104.22.168, but the same thing happens.
Make sure that your security software is not suppressing the user agent.
MY COMPUTER FREEZES AND SHOWS THE WALLPAPER - NO ICONS OR THE TAB START IN SAFE MODE, I WENT TO THE RESTAURANT, BUT THE SYSTEM PROTECTION TAB IS MISSING. WHAT CAN I DO?
Have you done any recent software or the hardware changes on your computer?
I suggest to start your computer in the Windows recovery environment , use the last good known configuration and control.
Using the last good known Configuration
If this does not help I suggest you try the steps below and check if they help to resolve the issue.
Start in safe mode and clean boot and check if the problem still persists. Clean boot helps eliminate software conflicts.
Follow the steps mentioned in the article below.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135
Note: when you are finished troubleshooting, follow step 7 article to start on normal startup.
If the steps do not help, then I suggest you to perform system restore from Windows recovery environment.
What are the system recovery options in Windows Vista?
Note: If you use the system restore from the System Recovery Options menu, you can't undo the restore operation.
Hope this helps and keep us posted.
I have a R4 with a build-date late 2013 (see datasheet below) version of the BIOS A11 running. I installed my videocard to an EVGA GTX 1070, and when I went into the BIOS, I noticed that the CPU power management Configuration page is now empty... is there literally no options at all. I'm missing all parameters that were there, including basic multipliers and other parameters of overclocking.
Selection of the "load OC level 1" or "load OC level options 2" in the previous page had no effect on the missing parameters. I downloaded and re-flashed with the A11 BIOS update on the Dell Support site, but there has been no change.
Main screen of the BIOS:
The Advanced tab:
CPU power management Configuration screen:
I'm not sure what happened, or even when it happened. I can't be sure the timing of the correlates of problem BIOS to upgrade the hardware... it was a month since I was last in the BIOS. Also, at the same time, I applied a large update of Windows (the Windows 10 anniversary update) and installed a new its PCIe card. Too many changes to be able to cancel for testing purposes.
Any ideas what's happening? I'm unable to OC my computer.
Aurora R4, the Service tag
BIOS version A11
Win 10 Pro (x 64) v1607 (Build 14393)
Core i7 - 4820K @ 3.7 GHz
EVGA GTX 1070 FTW ACX3.0
16 GB of RAM
512 MB SSD / 1 TB HARD drive
CASS ole was asked if I could put some info here, so here goes:
Recently, I update my R4 Aurora as well. A little older than you, I have an i7 3930 and it was A3 BIOS about it. I've updated my BIOS before installing my Radeon R9 380 4gig and 16gig new RAM card. I had Flash the BIOS A05 first then A11 BIOS on the Dell site. I installed the A11 version about a month ago. I checked my BIOS and I have the same options that Cass ole, looks like.
I also have the same version of Windows 10.
I don't have an its PCIe card.
We have a number of guard personnel who have relied on the "send forward as level 1' option to alert critical event notifications.
Surely other companies have encountered the same problem, has anyone at - he found a replacement of inviting?
Ideas, or news on this feature in a future release.
OK, thanks for the update.
It is most certainly something we have as a company and, hopefully, a version-replacement is coming soon.
We have only a 4 of the Z10 deployed at this stage, so for those few we found 'emergency alert', which works well, but is not free.
Note: In order to make it work he had to publish the app in the scope of work of appworld.
This workaround works, but again, if something like this can be built into a future version of the OS it would be greatly appreciated for business users who depended on her so in version 5, 6 and 7 devices.
In my phone (Z10, STL100-2, v10.2.1.2102) parameters a root menu option is missing: "phone settings." I would like to set up the "priority call" in the settings menu of the phone, but I can't not find enywhere.
This is, what I don't have:
Can someone help me, where it may be?
Ok thank you. That answers that question.
It is my understanding that some features such as the priority call are activated or not activated by the mobile operator.
For example, I have the priority call function, yet when I open it, it's all gray and impossible to change off.
IM setting up a demo of the ISE, version 22.214.171.1248, using the trial license included (advanced 100 base + 100). The ISE is installed on a Vmware ESXi host. The image of the ISE was downloaded directly from Cisco's Web site.
I'm posture configuration to check the av, but I can't get most of the options that guide the ISE and shown the documents. For example, in terms of posture, I don't see any provider available antivirus (see attachment) or the conditions of default av checking.
did I miss an option, the version won't? any help would be appreciated.
Much thanks in advance
You need to connect to the internet to get the latest updates from Cisco's AV... Start here;
I also STRONGLY recommend that you update to 1.1.3 patch 1... 1.1.1 was not known for its stability
We have 7.2 VCS server control, I'm not able to see the option of user account under maintenance-Login accounts. Please advise.
We don't have find me and TMS provisioing Extension service license, don't you think that's the reason.
I just started my first deployment of VCS, MCU and TMS and I must add customer movie, cisco Jabber video for Ipad and integrtaion with CUCM. CUCM has some end points of polycom and C40 and C60.
You precious advice will give me comfort during this deployment.
It's probably because that VCS runs in TMS PE commissioning mode, in which FindMe is managed by the portal user in TMS, meaning there is no need to set up the maintenance > logins on the VCS.
Edit: You added information that you do not have the keys option Device Provisioning and FindMe. Because user names relate directly to FindMe, the absence of an option key FindMe would explain also unable to see maintenance > login accounts > user accounts.
God knows how many years ago, I've upgraded to Windows 8.1, didn't like it, refreshed/restored Windows 8 and when I right click on an image missing some options are worn and the preview option does not work (Im guessing it is the top lack of option)
You have all the applications installed on the computer to open the specified file type?
I recommend you to set the default values for the program and check if the problem persists.
Check out these links for assistance:
Choose the apps Windows uses by default
Program access and computer by default
You can also check if the problem persists in clean boot mode.
Also, try to run a SFC scan-
How to perform a clean boot in Windows
Note: Refer to the section «How to reset the computer to start normally after a boot minimum troubleshooting»
to reset the computer to start as usual after a repair.
I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.
Maybe you are looking for
I change my mail OSX (machines with OSX 1.8.5 and Mavericks) to Thunderbird. However, a feature of OSX Mail I can't find in Thunderbird or supervised it: I use several e-mail accounts, OSX Mail shows me to the next level in a general Inbox. Below thi
Hello How can I chance the A10 coastal boot?With ESC, I can access the BIOS, but I can't chance anything except the time. Thank youTobias
My windows XP computer has a problem, now when I turn on a black screen with white text appears and at the end it says, press F1 to resume. I press F1 and the black screen reads a disk error occurred, press CTRL + ALT + DELETE to restart. This brings
I can't get the new update to my stl-100 z10 BlackBerry till now. Can any body cause some info on this subject? Please share it.
Hello I recently installed a 4.2.1 with 126.96.36.199.1 and 188.8.131.52.2 patch GBA the on a Win 2003 R2 Std SP2 edition Can't sart service case Whenever I have to resart, I have the following message is displayed in the Viewer window: (Note that I have the